M5STACK NanoH2 Tiny IoT Development Board User Guide

M5STACK NanoH2 Tiny IoT Development Board

IMICIMBI

I-OUTLINE

M5NanoH2 is a miniature, low-power IoT development board within the M5Stack development kit series. Powered by the ESP32-H2 MCU, it boasts advanced wireless communication support Zigbee, facilitating seamless control of infrared IoT devices through its built-in infrared transmitter. The onboard ceramic antenna ensures a stable wireless communication connection. Additionally, the device features programmable RGB LEDs, adding a personalized visual touch to projects. The inclusion of Grove interfaces allows M5NanoH2 to flexibly expand with various M5 devices, supporting the connection of different device types through protocols such as UART and I2C. This provides developers with abundant hardware expansion possibilities. Suitable for applications in smart homes, industrial automation, health monitoring, and IoT devices, M5NanoH2 delivers a comprehensive development solution for innovative projects.

I-ESP32-H2 

1. Amakhono Okuxhumana:
   • Bluetooth® 5 (LE): Incorporates Bluetooth 5.0 technology for extended wireless coverage and faster data transmission.
   • Zigbee and Thread (802.15.4): Supports Zigbee and Thread communication protocols, offering flexible connectivity for IoT applications.
2. Iphrosesa nokusebenza:
   • RISC-V 32-bit single-core processor: Delivers a highly flexible and scalable processor architecture.
   • Up to 160 MHz clock frequency: Ensures the device has fast and efficient data processing capabilities.
   • Industry-leading low-power and RF performance: Achieves a leading position in both power consumption and RF performance.
3. Inkumbulo:
   • Built-in 96 KB ROM: Used for storing firmware or program code. 320 KB SRAM: Utilized for runtime data storage.
   • 4 KB low-power SRAM: Specifically designed for low-power operations. Supports external Flash: Can extend the storage space for program code through an external memory.
4. Izikhonkwane ze-GPIO kanye nezixhumi ezibonakalayo ezihlelekayo:
   • Supports SPI, UART, I2C, I2S, RMT, TWAI, and PWM: Multiple communication interfaces, enhancing flexibility for data exchange with other de

UKUQALA NGOKUSHESHA

I-ARDUINO IDE 

Ukuze ufinyelele isikhulu se-Arduino webisiza (https://www.arduino.cc/en/Main/Software) and download the installation package for your operating system, follow these steps:

1. Vula i-Arduino IDE bese uzulazulela ku File -> Izintandokazi -> Izilungiselelo.
2. Kopisha Umphathi Webhodi Le-M5Stack elandelayo URL bese uyinamathisele kokuthi “Umphathi Webhodi Eyengeziwe URLs”: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/arduino/package_m5stack_index.json
3.  Go to: Tools -> Board: -> Boards Manager…
4. Cinga M5Stack, yithole, bese uchofoza okuthi “Faka.”
5. Khetha Amathuluzi -> Ibhodi: -> M5Stack Arduino
6. Select M5NanoH2

I-BLUETOOTH SERIAL 

• Vula i-Arduino IDE bese ulayisha i-exampUhlelo lwe: File -> Examples -> BluetoothSerial -> SerialToSerialBT.
• Xhuma idivayisi kukhompuyutha.
• Khetha imbobo efanele ukuze uyilayishe. Uma isiqediwe, idivayisi izovumela i-Bluetooth ngokuzenzakalelayo.
• The device name is set to ESP32test. Now, use a Bluetooth serial communication tool on your PC to achieve transparent transmission of Bluetooth serial data.

Faka i-Arduino

User manual, how to use zigbee function

Zigbee OnOff Light(End Device)

Arduino IDE Tools：

• Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
• Tools -> Zigbee mode: Zigbee ED (end device)
• Tools -> Partition Scheme: custom

Zigbee On Off Switch(Coordinator)

Arduino IDE Tools

• Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
•  Tools -> Flash Size: 2MB
• Tools -> Zigbee mode: Zigbee ZCZR (coordinator/router)
• Tools -> Partition Scheme: custom
• Zigbee ZCZR 2MB with spiffs

Izinyathelo zokusebenzisa 

1. Ensure that the coordinator is running and creating a network, burn the On Off Light code to the terminal node device.
2. After the device is started, it will automatically search and join the network, and On Off Switch will send light switching instructions at regular intervals.

Zigbee Scan Inethiwekhi

Arduino IDE Tools

• Tools -> Board: ESP32H2 Dev Module
•  Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
•  Tools -> Zigbee mode: Zigbee ZCZR (coordinator/router)
• Tools -> Partition Scheme: custom
•  Zigbee ZCZR 2MB with spiffs

Izinyathelo zokusebenzisa

After the device is started, it automatically starts scanning. If there is an active Zigbee network in the surrounding area, the current display result will be scanned after each scan is completed, and the next round of scanning will be automatically started.

Vula Uchungechunge

Arduino IDE Tools

•  Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
• Tools -> Partition Scheme: Minimal SPIFFS (1.3MB APP/700K SPIFFS)

Isexwayiso se-FCC

Isexwayiso se-FCC:
Noma yiziphi Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
Le divayisi ithobela ingxenye 15 yeMithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:

1. Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi, futhi
2. Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

ISAZISO ESIBALULEKILE:

Qaphela: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

Isitatimende Sokuchayeka Kwemisebe ye-FCC: Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-FCC ebekwe endaweni engalawuleki. Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20cm phakathi kwerediyetha nomzimba wakho.

Ibanga Lemvamisa:

• BLE 1M/2M: 2402-2480MHz
• I-ZigBee: 2405-2480MHz
• Maximum ElRP for CE:
• BLE: 1.32dbm
• I-ZigBee: 1.4dbm
• Umkhiqizi : M5Stack Technology Co., Ltd
• Block A10, Expo Bay South Coast, Fuhai Street, Bao'an District, Shenzhen, China

FAQ

• Q: What is the main processor of the M5STACK NanoH2?
  A: It uses an ESP32-H2FH4S with a RISC-V 32-bit single-core processor, running at up to 160 MHz.
• Q: What communication protocols does it support?
  A: It supports Zigbee, Thread (802.15.4), SPI, UART, I2C, I2S, RMT, TWAI, and PWM.
• Q: How much memory does the NanoH2 have?
  A: It has 96 KB ROM, 320 KB SRAM, and 4 KB low-power SRAM, with support for external Flash.
• Q: Can I use the M5STACK NanoH2 as a Zigbee coordinator and an end device?
  A: Yes, the device can be configured as both a Zigbee End Device (ED) or a Coordinator/Router (ZCZR) through the Arduino IDE settings.
• Q: What is the frequency range for wireless communication?
  A: The frequency range for BLE 1M/2M is 2402-2480MHz, and for ZigBee it is 2405-2480MHz.