M5Stack C6LoRA Module User Manual

I-M5Stamp C6LORA
Model: Stamp C6LoRA
Imaniwali yosebenzisayo

Incazelo

Stamp C6LoRa is a high-performance programmable LoRa module designed for the 830 ~ 930 MHz frequency range. The module features an ESP32-C6 SoC, an SX1262 LoRa RF transceiver, and an LNA signal amplifier chip. It comes with two onboard IPEX antenna connectors for external Wi-Fi and LoRa antennas, respectively.
At its core, the ESP32-C6 integrates a rich set of peripheral interfaces, enabling extended functionality through secondary development. It also supports 2.4GHz Wi-Fi 6, offering broader possibilities for IoT applications. Additionally, the module includes a  PI4IOE5V6408 IO expander chip, which is used for LoRa transceiver circuit control and amplifier enable signal management, delivering enhanced power efficiency and providing additional usable IO resources.
A built-in DC-DC converter supports a DC input range of 3.7 to 5V and allows for lithium battery power, making it adaptable to various hardware deployment scenarios. The module is well-suited for long-range communication applications such as smart irrigation, remote metering, and power equipment control.

Imininingwane

Ukuqala Ngokushesha

3.1 Ukulungiselela

1. Vakashela i-Arduino esemthethweni webbese ufaka i-Arduino IDE
   https://www.arduino.cc/en/Main/Software
2. Engeza Umphathi Webhodi olandelayo URL ku File → Okuncanyelwayo → Umphathi Webhodi Eyengeziwe URLs:
   https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
3. Vula Isiphathi Sebhodi, sesha i-“ESP32”, bese uchofoza ukufaka.
4. After installation, select the board “ESP32C6 Dev Module.”
5. Configure the following options. USB CDC On Boot: “Enabled”

3.2 Wi-Fi Test
Khetha i-exampnohlelo “Examples” → “WiFi” → “WiFiScan”, choose the port corresponding to your device, and click the compile and upload button in the top-left corner.
After uploading is complete, open the Serial Monitor to view Ulwazi lokuskena kwe-Wi-Fi.

3.3 BLE Scan
Khetha i-exampnohlelo “Examples” → “BLE” → ”Scan”, choose the port corresponding to your device, and click the compile and upload button in the top-left corner.
After uploading is complete, open the Serial Monitor to view Ulwazi lwe-BLE scan.

3.4 LoRa TX
After burning the LoRa test firmware, check the LoRa transceiver information via the ESP32-C6 USB CDC serial port.

Isexwayiso se-FCC

Isexwayiso se-FCC:
Noma yiziphi Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
Le divayisi ithobela ingxenye 15 yemithetho ye-FCC. Ukusebenza kungaphansi kwezimo ezimbili ezilandelayo: (1) Lolu cingo angeke lubangele ukuphazamiseka okuyingozi, futhi (2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

ISAZISO ESIBALULEKILE:
Qaphela: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise, ​​futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma ingafakiwe futhi isetshenziswe ngokuhambisana nemiyalelo, ingase ibangele ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

Isitatimende Sokuvezwa Kwemisebe ye-FCC: Le mishini ihambisana nemikhawulo yokuvezwa kwemisebe ye-FCC ebekelwe imvelo engalawulwa.

Inothi elibalulekile:
Esimeni lapho le mibandela ingenakufinyelelwa khona (ngokwesiboneloample, certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid, and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

Qeda Ukulebula Komkhiqizo
The final end product must be labeled in a visible area with the following “Contains FCC ID: 2AN3WM5STAMPC6LORA”.

Ulwazi Lwemanuwali oluya kumsebenzisi wokugcina
Umhlanganisi we-OEM kufanele aqaphele ukuthi anganikezi umsebenzisi wokugcina ulwazi mayelana nendlela yokufaka noma ukususa le mojula ye-RF kubhukwana lomsebenzisi lomkhiqizo wokugcina ohlanganisa le mojula.
Imanuwali yomsebenzisi wokugcina izofaka yonke imininingwane yokulawula edingekayo/izixwayiso njengoba kukhonjisiwe kule manuwali.

Imiyalo yokuhlanganisa yabakhiqizi bomkhiqizo abasingethe ngokuya nge-KDB 996369 D03 OEM Manual v01

2.2 Uhlu lwemithetho ye-FCC esebenzayo
I-CFR 47 FCC INGXENYE 15 INGXENYE C isiphenyiwe. Isebenza ku-transmitter ye-modular.

2.3 Izimo ezithile zokusebenza zokusebenza
Le mojula iyimojuli ezimele yodwa. Uma umkhiqizo wokugcina uzobandakanya izimo eziningi zokudlulisa ngesikhathi esisodwa noma izimo zokusebenza ezihlukile zesidlulisi semojuli ezimele sodwa kumsingathi, umenzi womsingathi kufanele axhumane nomkhiqizi wemojula ukuze bathole indlela yokufaka ohlelweni lokugcina.

2.4 Izinqubo zamamojula anomkhawulo
Akufaneleki

2.5 Landelela imiklamo ye-antenna
Akufaneleki

2.6 Ukucatshangelwa kokuchayeka kwe-RF
The device has been evaluated to meet the general RF exposure requirements. The device can be used in mobile or fixed exposure conditions with a minimum distance of 20 cm between the radiator & user’s body.

2.7 Izimpondo
This radio transmitter has been approved by the Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

2.8 Ulwazi lwelebula nokuhambisana nemithetho
The final end product must be labeled in a visible area with the following “Contains FCC ID: 2AN3WM5STAMPC6LORA”.

2.9 Ulwazi olumayelana nezindlela zokuhlola kanye nezimfuneko zokuhlola ezengeziwe
The host manufacturer that installs this module with limited modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C:15.247 and 15.209 requirement, only if the test result complies with FCC part 15.247 and 15.209 requirements, then the host can be sold legally.

Imiyalo yokuhlanganisa yabakhiqizi bomkhiqizo abasingethe ngokuya nge-KDB 996369 D03 I-OEM Manual v01

2.10 Ukuhlola okwengeziwe, Ingxenye 15 Umshwana Wokuzihlangula Oyingxenye Engaphansi
This transmitter module is tested as a subsystem, and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of the rule requirements if applicable.

2.11 Qaphela Imibono ye-EMI
We recommend using “best practice” RF design engineering, testing, and evaluation in case non-linear interactions generate additional non-compliant limits due to module placement to host components or properties. The host manufacturer is responsible for ensuring compliance with the applicable FCC rules for the transmitters operating individually and simultaneously. This includes compliance for the summation of all emissions from all outputs occupying the same or overlapping frequency ranges, as defined by the applicable rules.

2.12 Ulenza Kanjani Izinguquko – Inothi Elibalulekile
Esimeni lapho le mibandela ingenakufinyelelwa khona (ngokwesiboneloample, certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid, and the FCC ID cannot be used on the final product. In these circumstances, OEM integrator contacts Grantees to make permissive changes, or the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

Inqobo nje uma zonke izimo ezingenhla zihlangatshezwana nazo, ezinye izivivinyo zama-transmitter ngeke zidingeke. Kodwa-ke, isihlanganisi se-OEM sisenomthwalo wemfanelo wokuhlola umkhiqizo wabo wokugcina nganoma yiziphi izimfuneko zokuthobela ezengeziwe ezidingekayo ngale mojuli efakiwe.