I-SENECA Z-8AI Okokufaka kwe-Analog noma Imojuli yokuphumayo
IZIXWAYISO ZOKUQALA
Igama elithi ISEXWAYISO elandulelwa uphawu libonisa izimo noma izenzo ezibeka ukuphepha komsebenzisi engcupheni. Igama elithi ATTENTION elandulelwa uphawu libonisa izimo noma izenzo ezingase zilimaze ithuluzi noma okokusebenza okuxhunyiwe. Iwaranti izoba ize futhi ize uma kwenzeka sisetshenziswa ngokungafanele noma tampehambisana nemojuli noma izisetshenziswa ezihlinzekwe umenzi njengoba kudingeka ukuze zisebenze kahle, futhi uma imiyalelo equkethwe kule ncwajana ingalandelwa.
- ISEXWAYISO: Okuqukethwe okugcwele kwaleli bhukwana kumele kufundwe ngaphambi kwanoma yikuphi ukusebenza. Imojula kufanele isetshenziswe kuphela ngabasebenza ngogesi abaqeqeshiwe.
- Imibhalo ethile iyatholakala kusetshenziswa i-QR-CODE eboniswe ekhasini 1.
- Imojuli kumele ilungiswe futhi izingxenye ezilimele zithathelwe indawo uMkhiqizi.
- Umkhiqizo uyazwela ekukhishweni kwe-electrostatic. Thatha izinyathelo ezifanele ngesikhathi sokusebenza.
- Ukulahlwa kwemfucuza kagesi ne-elekthronikhi (kusebenza e-European Union nakwamanye amazwe anokugaywa kabusha). Uphawu olusemkhiqizweni noma emaphaketheni awo lubonisa ukuthi umkhiqizo kufanele unikezelwe esikhungweni sokuqoqwa kwempahla esigunyazwe ukuvuselela imfucuza kagesi neye-elekthronikhi.
MAYELANA NENKAMPANI
- I-SENECA srl; Nge-Austria, 26 - 35127 - PADOVA - ITALY;
- Ucingo. +39.049.8705359
- Ifeksi +39.049.8706287
ULWAZI LOKUXHUMANA
- Ukusekela kwezobuchwepheshe: support@seneca.it
- Ulwazi lomkhiqizo: sales@seneca.it
- Le dokhumenti iyindawo ye-SENECA srl. Amakhophi nokukhiqizwa kabusha akuvunyelwe ngaphandle uma kugunyaziwe. Okuqukethwe kulo mbhalo kuhambisana nemikhiqizo echazwe kanye nobuchwepheshe.
- Idatha eshiwo ingashintshwa noma yengezwe ngezinjongo zobuchwepheshe kanye/noma zokuthengisa.
UKUHLELWA KWEMODULI
- Ubukhulu: LxHxD 17.5 x 102.5 x 111 mm;
- Isisindo: 110g;
- Indawo ebiyelwe: PA6, emnyama
IZIMPAWU NGE-LED PHAMBILI
| I-LED | ISIMO | Incazelo ye-LED |
| I-PWR Green | ON | Idivayisi inikwe amandla ngendlela efanele |
| YEHLULEKA ophuzi | Iyabaneka | Iphutha noma iphutha |
| I-RX Ebomvu | Iyabaneka | Ukwamukelwa kwephakethe kuqediwe |
| I-RX Ebomvu | ON | Okudidayo / Hlola uxhumano |
| I-TX Ebomvu | Iyabaneka | Ukudluliswa kwephakethe kuqediwe |
IMICIMBI YOBUCHWEPHESHE
| IZIMPAWU | |
| Voltage input: | I-Bipolar ene-FS ehlelekayo kokuthi +2Vdc kanye +10Vdc Input impedance >100kOhm |
| Okokufaka kwamanje: | I-Bipolar ene-FS Programmable kokuthi +20mA ne-50Ohm yangaphakathi shunt ekhethekayo nge-DIP-switch. Ukunikezwa kwamandla okutholakalayo: 90 + 90mA ku-13Vdc. |
| Inombolo yeziteshi: | 8 |
| Ukulungiswa kokokufaka: | 15 bit + uphawu. |
| Ukuvikelwa Kokufaka: | ± 30Vdc noma 25mA |
| Ukunemba voltage kanye neyamanje: | Ukuqala: 0.1 wesikali esigcwele Umugqa womugqa : 0.03% wesilinganiso. Uziro: 0.05% wesikali.
TC: 100 ppm, EMI: <1 % |
| Sampisikhathi sokulala | 120 ms/channel noma 60 ms/channel |
| Isikhathi sokubuyekeza ukulinganisa (sampisilinganiso sobude: 10ms) | Isiteshi esingu-1 sinikwe amandla (isikhathi sokubuyekeza isiteshi esingu-1)
Iziteshi ezi-4 zinikwe amandla (isikhathi sokubuyekeza iziteshi ezi-4) Iziteshi ezi-8 zinikwe amandla (isikhathi sokubuyekeza iziteshi ezi-8) |
UKULUNGISWA KWEZILUNGISELELO ZEFEKTHI
UKUSETHA I-DIP-Switchches
Ukuma kwamaswishi e-DIP kuchaza imingcele yokuxhumana yebhasi ye-Mod yemojuli: Ikheli kanye Nezinga Lokungalungi Ithebula elilandelayo libonisa amanani e-Baud Rate kanye nekheli ngokuya ngesethingi ye-DIP-switch:
Qaphela: Uma ukushintsha kwe-DIP koku-1 kuye ku-8 KUVALIWE, izilungiselelo zokuxhumana zithathwa ezinhlelweni (EEPROM).
Qaphela 2: Ulayini we-RS485 kufanele unqanyulwe kuphela ekugcineni kolayini wokuxhumana.
Izilungiselelo zama-dip-switch kumele zihambisane nezilungiselelo ezikumarejista. Incazelo yamarejista iyatholakala KU-MANUAL YOMSEBENZISI.
IZIXHUMANO ZIKAgesi
Ukunikezwa kwamandla kanye nesixhumi esibonakalayo se-Modbus kuyatholakala kusetshenziswa ibhasi likaloliwe i-Seneca DIN, ngesixhumi esingemuva se-IDC10, noma isisetshenziswa se-Z-PC-DINAL-17.5.
Isixhumi Sasemuva (IDC 10)
Umfanekiso ubonisa izincazelo zamaphinikhodi e-IDC10 ahlukahlukene uma amasignali azothunyelwa ngawo ngokuqondile.
IZIMPAWU
- A) Umqtagokokufaka okunezinzwa ezivela kuMODULE (13 Vdc)
- B) Umqtagokokufaka kwe-e okunezinzwa AKUveli kuMODULE
- C) Okokufaka kwamanje okunezinzwa AKUPHUMI kuMODULE
- D) Okokufaka kwamanje nokunikezwa kwenzwa okuvela kuMODULE (13 Vdc)
- E) Okokufaka kwamanje okunenzwa yamandla kagesi ANGAPHANDLE
QAPHELA
- Imikhawulo ephezulu yokunikezwa kwamandla akumele yeqiwe, njengoba lokhu kungase kubangele umonakalo omkhulu kumojuli. Vala imojuli ngaphambi kokuxhuma okokufaka nokuphumayo.
- Ukuze uhlangabezane nezidingo ze-electromagnetic immune immune:
- sebenzisa izintambo zesignali ezivikelekile;
- xhuma isihlangu kusistimu yomhlaba yezinsimbi ezithandwayo;
- hlukanisa izintambo ezivikelwe kwezinye izintambo ezisetshenziselwa ukufaka amandla (ama-inverter, ama-motor, ama-oven okungenisa, njll…).
- faka i-fuse enomthamo ongu-MAX ongu-2.5A eduze nemojuli.
- qinisekisa ukuthi umthamo wokuphakelwa kwamandla kagesitage kuya module aweqi: 40Vdc noma 28Vac, ngaphandle kwalokho module izolimala.
Amadokhumenti / Izinsiza
 |
I-SENECA Z-8AI Okokufaka kwe-Analog noma Imojuli yokuphumayo [pdf] Incwadi Yeziqondiso I-Z-8AI, Okokufaka kwe-Analogi noma Imojula Yokuphumayo, Imojula ye-Analog, Okokufaka kwe-Analog ye-Z-8AI noma Imojula yokuphumayo |
