INCWADI YOKUFAKA
Z-4RTD2-SI
IZIXWAYISO ZOKUQALA
Igama elithi ISEXWAYISO elandulelwa uphawu libonisa izimo noma izenzo ezibeka ukuphepha komsebenzisi engcupheni. Igama elithi ATTENTION elandulelwa uphawu libonisa izimo noma izenzo ezingase zilimaze ithuluzi noma okokusebenza okuxhunyiwe. Iwaranti izoba ize futhi ize uma kwenzeka sisetshenziswa ngokungafanele noma tampehambisana nemojuli noma izisetshenziswa ezihlinzekwe umenzi njengoba kudingeka ukuze zisebenze kahle, futhi uma imiyalelo equkethwe kule ncwajana ingalandelwa.
 |
ISEXWAYISO: Okuqukethwe okugcwele kwale manuwali kufanele kufundwe ngaphambi kwanoma yikuphi ukusebenza. Imojula kufanele isetshenziswe kuphela ngabasebenza ngogesi abaqeqeshiwe. Amadokhumenti athile atholakala nge-QR-CODE eboniswe ekhasini 1. |
 |
Imojuli kumele ilungiswe futhi izingxenye ezilimele zithathelwe indawo uMkhiqizi. Umkhiqizo uyazwela ekukhishweni kwe-electrostatic. Thatha izinyathelo ezifanele ngesikhathi sokusebenza. |
 |
Ukulahlwa kwemfucuza kagesi ne-elekthronikhi (kusebenza e-European Union nakwamanye amazwe anokugaywa kabusha). Uphawu olusemkhiqizweni noma emaphaketheni awo lubonisa ukuthi umkhiqizo kufanele unikezelwe esikhungweni sokuqoqwa kwempahla esigunyazwe ukuvuselela imfucuza kagesi neye-elekthronikhi. |
https://www.seneca.it/products/z-4rtd2-si
UMBHALO Z-4RTD2-SI
I-SENECA srl; Nge-Austria, 26 - 35127 - PADOVA - ITALY; Ucingo. +39.049.8705359 - Ifeksi +39.049.8706287
ULWAZI LOKUXHUMANA
| Ukusekela kwezobuchwepheshe | support@seneca.it | Ulwazi lomkhiqizo | sales@seneca.it |
Le dokhumenti iyindawo ye-SENECA srl. Amakhophi nokukhiqizwa kabusha akuvunyelwe ngaphandle uma kugunyaziwe.
Okuqukethwe kulo mbhalo kuhambisana nemikhiqizo echazwe kanye nobuchwepheshe.
Idatha eshiwo ingashintshwa noma yengezwe ngezinjongo zobuchwepheshe kanye/noma zokuthengisa.
UKUHLELWA KWEMODULI
Ubukhulu: 17.5 x 102.5 x 111 mm
Isisindo: 100 g
Isitsha: PA6, emnyama
IZIMPAWU NGE-LED PHAMBILI
| I-LED | ISIMO | Incazelo ye-LED |
| I-PWR | ON | Idivayisi inikwe amandla ngendlela efanele |
| FAIL | ON | Insimbi esesimweni sephutha |
| RX | Iyabaneka | Irisidi yedatha echwebeni #1 RS485 |
| TX | Iyabaneka | Ukudluliswa kwedatha ku-port #1 RS485 |
IMICIMBI YOBUCHWEPHESHE
| IZIQINISEKISO |   https://www.seneca.it/products/z-4rtd2-si/doc/CE_declaration |
| UKUNIKEZWA KWAMANDLA KAGESI | 10 ÷ 40Vdc; 19 ÷ 28Vac; 50-60Hz; Ubukhulu 0.8W |
| IZIMO ZEMVELO | Izinga lokushisa lokusebenza: -25°C ÷ +70°C Umswakamo: 30% ÷ 90% awuncishisi Izinga lokushisa lesitoreji: -30°C ÷ +85°C Ukuphakama: Kufika ku-2000 m ngaphezu kwezinga lolwandle Isilinganiso sokuvikela: IP20 |
| UMHLANGANO | 35mm DIN ujantshi we-IEC EN60715 |
| IZIXHUMANO | Ibhulokhi yetheminali ye-pitch engu-3.5 mm ekhiphekayo, ingxenye yekhebula engu-1.5 mm2 enkulu |
| IZITHETHI ZOKUXHUMANA | 4-indlela ekhishwayo isikulufu block terminal; ubuningi. isigaba 1.5mmTION 2; isinyathelo: 3.5 mm IDC10 isixhumi esingemuva sebha ye-IEC EN 60715 DIN, Modbus-RTU, 200÷115200 Baud Micro USB ngaphambili, umthetho olandelwayo we-Modbus, 2400 Baud |
| UKUHLANGANISA |  |
| I-ADC | Ukulungiswa: 24 bit Ukunemba kokukalwa okungu-0.04% kwesikali esigcwele Ikilasi / Prec. Isisekelo: 0.05 Ithempelesha yokushayela: <50 ppm/K Umugqa: 0,025% wesilinganiso esigcwele |
QAPHELA: Ifuse ebambezelekile enesilinganiso esiphezulu esingu-2.5 A kufanele ifakwe ochungechungeni ngoxhumo lokuphakelwa kwamandla, eduze nemojuli.
UKUSETHA I-DIP-Switchches
Isikhundla samaswishi e-DIP sichaza imingcele yokuxhumana ye-Modbus yemojuli: Ikheli kanye ne-Baud Rate
Ithebula elilandelayo libonisa amanani we-Baud Rate kanye nekheli ngokuya ngokuhlelwa kwamaswishi e-DIP:
| Isimo se-DIP-Shintsha | |||||
| SW1 POSITION | I-BAUD | SW1 POSITION | IKHELI | POSITION | I-TERMINATOR |
| 1 2 3 4 5 6 7 8 | 3 4 5 6 7 8 | 10 | |||
 ---------- |
9600 |  |
#1 | |
Ikhutshaziwe |
| ---------- |
19200 | |
#2 | |
Inikwe amandla |
| ---------- |
38400 | • • • • • • • • • • | #… | ||
| ---------- |
57600 | |
#63 | ||
|
Kusuka ku-EEPROM | |
Kusuka ku-EEPROM | ||
Qaphela: Uma i-DIP – ukushintsha koku-1 kuye ku-8 KUVALIWE, amasethingi okuxhumana athathwa ohlelweni (EEPROM).
Qaphela 2: Ulayini we-RS485 kufanele unqanyulwe kuphela ekugcineni kolayini wokuxhumana.
| IZILUNGISELELO ZEFEKTHI | |||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
| LEGEND | |
|
ON |
|
VALIWE |
Indawo yama-dip-switches ichaza imingcele yokuxhumana yemojuli.
Ukucushwa okuzenzakalelayo kungokulandelayo: Ikheli 1, 38400, alikho ukulingana, ibhithi elilodwa lokuma.
| I-CH1 | I-CH2 | I-CH3 | I-CH4 | |
| Uhlobo lwenzwa | I-PT100 | I-PT100 | I-PT100 | I-PT100 |
| Uhlobo lwedatha olubuyisiwe, olukalwa ngokuthi: | °C | °C | °C | °C |
| Ukuxhumana | 2/4 IZINKAMU | 2/4 IZINKAMU | 2/4 IZINKAMU | 2/4 IZINKAMU |
| Izinga lokutholwa | 100ms | 100ms | 100ms | 100ms |
| Isignali ye-LED yokwehluleka kwesiteshi | YEBO | YEBO | YEBO | YEBO |
| Inani elilayishiwe uma kwenzeka iphutha | 850 °C | 850 °C | 850 °C | 850 °C |
UKUBUYEKEZWA KWE-FIRMWARE
Inqubo yokuvuselela i-Firmware:
- Nqamula idivayisi ekunikezeni amandla;
- Ukubamba phansi inkinobho yokuvuselela i-firmware (ebekwe njengoba kuboniswe emfanekisweni oseceleni), xhuma kabusha idivayisi ekunikezeni amandla;
- Manje ithuluzi likumodi yokuvuselela, xhuma ikhebula le-USB ku-PC;
- Idivayisi izoboniswa njengeyunithi yangaphandle ethi “RP1-RP2”;
- Kopisha i-firmware entsha kuyunithi "ye-RP1-RP2";
- Ngemuva kwe-firmware file ikopishiwe, idivayisi izoqala kabusha ngokuzenzakalelayo.
IMITHETHO YOKUFAKA
Imojula yakhelwe ukufakwa mpo kumzila wesitimela we-DIN 46277. Ukuze usebenze kahle nokuphila isikhathi eside, kufanele kunikezwe umoya owanele. Gwema ukubeka amapayipi noma ezinye izinto ezithiya izikhala zokungena komoya. Gwema ukukhweza amamojula phezu kwezinto ezikhiqiza ukushisa. Kunconywa ukufakwa engxenyeni engezansi yephaneli kagesi.
QAPHELA Lawa ngamadivayisi ohlobo oluvulekile futhi ahloselwe ukufakwa endaweni ebiyelwe ekugcineni/iphaneli enikeza ukuvikelwa komshini nesivikelo ekusakazekeni komlilo.
IZIXHUMANO ZIKAgesi
ISEXWAYISO
Ukuze uhlangabezane nezidingo ze-electromagnetic immune immune:
- sebenzisa izintambo zesignali ezivikelekile;
- xhuma isihlangu ohlelweni olukhethekile lomhlaba lwezinsimbi;
- hlukanisa izintambo ezivikelekile kwezinye izintambo ezisetshenziselwa ukufaka amandla (ama-transformer, ama-inverter, ama-motor, njll ...).
QAPHELA
Sebenzisa kuphela ithusi noma i-aluminium egqoke ithusi noma i-AL-CU noma amakhondaktha e-CU-AL
Ukunikezwa kwamandla kanye nesixhumi esibonakalayo se-Modbus kuyatholakala kusetshenziswa ibhasi likaloliwe i-Seneca DIN, ngesixhumi esingemuva se-IDC10, noma isisetshenziswa se-Z-PC-DINAL2-17.5.
Isixhumi Sangemuva (IDC 10)
Umfanekiso ubonisa izincazelo zamaphinikhodi e-IDC10 ahlukahlukene uma amasignali azothunyelwa ngawo ngokuqondile.
OKOKUFAKA:
imojula yamukela ama-temperature probe ngoxhumo lwezintambo ezingu-2, 3, no-4.
Ngokuxhunywa kukagesi: izintambo ezisikiwe ziyanconywa.
| 2 IZINCWABO | Lokhu kuxhumana kungasetshenziselwa amabanga amafushane (< 10 m) phakathi kwemojuli ne-probe. Lokhu kuxhumana kwethula iphutha lokulinganisa elilingana nokumelana kwezintambo zokuxhuma. |
| 3 IZINCWABO | Uxhumano oluzosetshenziselwa amabanga amaphakathi (> 10 m) phakathi kwemojuli ne-probe. Ithuluzi lenza isinxephezelo senani elimaphakathi lokumelana kwezintambo zokuxhuma. Ukuqinisekisa isinxephezelo esifanele, izintambo kufanele zibe nokumelana okufanayo. |
| 4 IZINCWABO | Uxhumano oluzosetshenziselwa amabanga amade (> 10 m) phakathi kwemojuli ne-probe. Inikeza ukunemba okuphezulu, ku view yokuthi ithuluzi lifunda ukumelana kwenzwa ngokuzimela ukumelana nezintambo. |
| I-INPUT PT100EN 607511A2 (ITS-90) | I-INPUT PT500 EN 607511A2 (ITS-90) | ||
| UBANZI LOKUKALA | I -200 = +650°C | UBANZI LOKUKALA | I -200 + +750°C |
| I-INPUT PT1000 EN 60751/A2 (ITS-90) | I-INPUT NI100 DIN 43760 | ||
| UBANZI LOKUKALA | -200 + +210°C | UBANZI LOKUKALA | -60 + +250°C |
| I-INPUT CU50 GOST 6651-2009 | I-INPUT CU100 GOST 6651-2009 | ||
| UBANZI LOKUKALA | I -180 + +200°C | UBANZI LOKUKALA | I -180 + +200°C |
| I-INPUT Ni120 DIN 43760 | I-INPUT NI1000 DIN 43760 | ||
| UBANZI LOKUKALA | I -60 + +250°C | UBANZI LOKUKALA | I -60 + +250°C |
I-MI00581-0-EN
INCWADI YOKUFAKA
Amadokhumenti / Izinsiza
 |
I-SENECA Z-4RTD2-SI Okokufaka kwe-Analog noma Imojula yokuphumayo [pdf] Incwadi Yeziqondiso I-Z-4RTD2-SI, Okokufaka kwe-Analogi noma Imojula yokuphumayo, i-Z-4RTD2-SI Okokufaka kwe-Analog noma Imojula yokuphumayo |
