KBS manufactures a diverse range of consumer products, most notably programmable bread makers, kitchen appliances, and ceiling fans, alongside professional golf shafts.
I-KBS is a multi-faceted brand name associated with several distinct product lines in the consumer market. In the home and kitchen sector, KBS is widely recognized for its versatile, fully automatic bread makers (such as the 17-in-1 and 19-in-1 models) and stand mixers, offering programmable settings for homemade baking. The brand also markets modern ceiling fans with integrated LED lighting and remote control functionality.
Additionally, the acronym KBS represents a premier name in sports equipment (KBS Golf Shafts), known for manufacturing high-performance steel and graphite golf shafts used by professionals worldwide. This category collects user manuals, setup guides, and warranty information for the various appliances and products sold under the KBS label.
Izincwadi zakamuva ezivela manuals+ ikhethelwe lolu hlobo.
Buka amavidiyo wokusetha, ukufakwa, nokuxazulula izinkinga zalo mkhiqizo.
Imibuzo evamile mayelana namamanyuwali, ukubhaliswa, nokusekelwa kwalolu mkhiqizo.
For service and support regarding KBS bread makers, specifically models like the MBF-011 and MBF-014A, you can contact the support team via email at byran@jmkbs.com.
To pair the remote, turn on the main power switch. Within 5 seconds of powering on, long-press the designated pair button (often labeled 'ALL OFF', the power icon, or 'Fan OFF') until the light flashes, indicating a successful connection.
The 'HHH' code indicates that the internal temperature of the bread maker is too high to start a new cycle. Open the lid and allow the machine to cool down for 10 to 20 minutes before attempting to use it again.
It is highly recommended to use Instant Yeast for KBS automatic bread makers. Ordinary active dry yeast may require longer fermentation times that do not align with the machine's pre-programmed cycles.
If the fan remote is not responding, try resetting the pairing by turning off the power at the wall switch, waiting for a moment, turning it back on, and immediately pressing and holding the pairing button for 5 seconds.