VISION Talking Analog and Digital Watch User Manual

Isingeniso

Thank you for choosing the VISION Talking Analog and Digital Watch. This watch is designed to provide clear time announcements in Spanish, making it ideal for individuals with visual impairments, children, and the elderly. It features both an analog display for traditional time-telling and a digital display for precise readings, along with an alarm function.

Umfanekiso 1: Ngaphambili view of the VISION Talking Analog and Digital Watch.

Setha

1. Ukukhipha impahla kanye nokuhlola kokuqala

Carefully remove the watch from its packaging. Inspect the watch for any visible damage. The watch comes with a battery pre-installed and is ready for initial setup.

Figure 2: The watch as it appears in its original clear plastic case.

2. Initial Time Setting (Digital)

The digital time needs to be set first. Refer to the 'Operating Instructions' section for detailed steps on setting the digital time using the 'MODE', 'HOUR', and 'MINUTE' buttons.

3. Ukusetha Isikhathi Sokuqala (I-Analog)

The analog hands are set independently using the crown (small knob) on the side of the watch. Pull out the crown and rotate it to adjust the analog hands to match the digital time. Push the crown back in to secure the setting.

Imiyalelo yokusebenza

Inkinobho Imisebenzi

• Inkinobho ye-MODE: Used to cycle through different modes (Time, Alarm Setting).
• TALKING Button: Press to hear the current time announced in Spanish.
• HOUR Button: Used to adjust the hour in setting modes.
• MINUTE Button: Used to adjust the minute in setting modes.
• Umqhele: Used to set the analog hands.

Telling Time

• Voice Announcement: Cindezela inkinobho OKUKHULUMA button to hear the current time spoken aloud in Spanish.
• Ukuboniswa Kwedijithali: The digital display shows the time in a 12-hour format (AM/PM).
• Isibonisi se-Analog: The traditional hands indicate the hour and minute.

Ukusetha Isikhathi Sedijithali

1. Cindezela inkinobho IMODE inkinobho ngokuphindaphindiwe kuze kube isibonisi sedijithali sibonisa imodi yokuhlela isikhathi (ngokuvamile iboniswa ngamadijithi akhanyayo).
2. Sebenzisa i- IHORA button to adjust the hour. Pay attention to AM/PM indicators.
3. Sebenzisa i- MINUTE inkinobho ukulungisa imizuzu.
4. Cindezela inkinobho IMODE button again to confirm and exit the time setting mode.

Isetha i-alamu

1. Cindezela inkinobho IMODE button until the alarm setting mode is displayed (often indicated by an alarm icon or 'AL').
2. Sebenzisa i- IHORA inkinobho yokusetha ihora le-alamu olifunayo.
3. Sebenzisa i- MINUTE inkinobho yokusetha imizuzu ye-alamu oyifunayo.
4. Cindezela inkinobho IMODE button to activate the alarm and exit the setting mode.
5. To turn off a sounding alarm, press any button.

Isondlo

Ukuhlanza

Ukuze uhlanze iwashi lakho, lisule kahle ngendwangu ethambile, eyomile. Ngokungcola okunenkani, kancane damp cloth can be used, but ensure no moisture enters the watch. Avoid using harsh chemicals or abrasive materials.

Ukushintshwa Kwebhethri

The watch uses a Lithium-metal battery. When the voice announcement becomes faint or the digital display dims, it's time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and function.

Ukumelana Namanzi

This watch is marked as "WATER RESISTANT." This typically means it can withstand splashes, rain, or brief immersion in water, such as washing hands. It is hhayi suitable for swimming, showering, or diving. Prolonged exposure to water or submersion may cause damage.

Ukuxazulula inkinga

• No Voice Announcement:
  • Hlola ileveli yebhethri. Faka esikhundleni uma uphansi.
  • Ensure the TALKING button is pressed firmly.
• Ukuboniswa Kwedijithali Akunalutho noma Kufiphele:
  • Battery may be depleted. Replace the battery.
• Isikhathi Asinembile:
  • Re-set the digital time following the instructions in the 'Operating Instructions' section.
  • Ensure the analog hands are synchronized with the digital time by adjusting the crown.
  • Low battery can affect timekeeping accuracy. Consider battery replacement.
• I-alamu Ayikhali:
  • Ensure the alarm is set correctly and activated.
  • Hlola ileveli yebhethri.

Imininingwane

Figure 3: Watch face diameter measurement (40 mm).

Figure 4: Watch case thickness measurement (16 mm).

Figure 5: Watch strap width measurement (18 mm).

Umfanekiso 6: Eksamples of wrist circumference fit (20 cm and 12 cm).

Iwaranti kanye Nokusekela

For warranty information or technical support, please refer to the documentation included with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.