I-Zennio ZIOBINT Series LED kanye ne-Electronic Relay Control Outputs Manual

I-ZIOBINT Series LED kanye ne-Electronic Relay Control Outputs

“

Imininingwane:

• Igama Lomkhiqizo: BIN-T
• Amamodeli: 8X, 6X, 4X, 2X
• Izici:
  • I-Universal Interface
  • 8/6/4/2 Okokufaka kanambambili/Okukhiphayo kwe-LED
  • Okokufaka oku-1 kwe-Temperature Probe
  • I-Zennio Thermostat Heartbeat noma isaziso esisaphila
  • Ukuphepha kwe-KNX

Imiyalo yokusetshenziswa komkhiqizo:

1. Isingeniso:

I-BIN-T iyisixhumi esibonakalayo sendawo yonke esinamamodeli amaningi anikelayo
izinombolo ezihlukene okokufaka kanambambili/okuphumayo kwe-LED nezinga lokushisa
probe input.

2. Ukumisa:

2.1 Okujwayelekile:

Ngemva kokungenisa i-database yedivayisi ku-ETS nokuyengeza kuyo
iphrojekthi yakho, landela lezi zinyathelo:

1. Finyelela kuthebhu ethi Amapharamitha wedivayisi ukuze ucushwe.
2. Vula/vala ukusebenza okudingekayo kokuthi Okujwayelekile
   isikrini.

Izigcawu ngemva kokulanda:

Chaza ukuthi izigcawu ezilondoloziwe zilungiswa ngamapharamitha noma ziyagcinwa
ngemva kokulanda. Qaphela ukuziphatha kokulanda kokuqala noma
izinguqulo ezahlukene.

Ukubambezeleka Kokuqalisa [0…255]:

Setha ukubambezeleka ngemva kokuqaliswa ukuze uvimbele impendulo esheshayo
kuma-oda noma ukuhanjiswa kwezinto zebhasi.

Ukucushwa kwesiteshi:

Khetha iziteshi njengokufaka kanambambili, okokukhipha ukukhanya kwe-LED, noma
I-Electronic Relay Control. Nika amandla amathebhu engeziwe ukuze uthole imininingwane
ukumisa.

Ukuze uthole imininingwane eyengeziwe ngemisebenzi ethile, bheka ku
imaniwali yosebenzisayo.

I-FAQ:

Q: Ngingalutholaphi ulwazi olunemininingwane mayelana nokuphepha kwe-KNX
I-BIN-T?

A: Bheka imanuwali ethile yomsebenzisi ye-KNX Security etholakala kuyo
uZennio web ingosi (www.zennio.com).

Q: Ngingaqinisekisa kanjani ukusebenza okulungile kwezigcawu ezisanda kungezwa
ngemva kokulanda?

A: Qiniseka ukuthi wenza ukulanda ngokuhlola inketho
Ilungiselelwe Amapharamitha uma izigcawu ezintsha zengezwa zilandelana
okulandwayo.

“`

I-BIN- T 8X / 6X / 4X / 2X
I-Universal Interface enokokufaka kanambambili okungu-8/6/4/2/1 Okokufaka kwe-LED kanye nokokufaka kwe-Temperature Probe oku-XNUMX
ZIOBINT8 ZIOBINT6 ZIOBINT4 ZIOBINT2
Inguqulo yohlelo lohlelo lokusebenza: [1.1] Uhlelo lomsebenzisi: [1.1]_a www.zennio.com

IMANIWALI YOSEBENZISAYO

I-BIN-T
OKUQUKETHWE
Okuqukethwe ……………………………………………………………………………………………………………………………. 2 1 Isingeniso …………………………………………………………………………………………………………….. 3
1.1 BIN-T…………………………………………………………………………………………………………………… 3 2 Ukucushwa …………………………………………………………………………………………………………………. 4
2.1 Okujwayelekile ………………………………………………………………………………………………………….. 4 2.2 Amashaneli …… ………………………………………………………………………………………………………………… 6
2.2.1 Okokufaka kanambambili……………………………………………………………………………………………….. 6 2.2.2 I-LED Lighting Output …………………………………………………………………………………………. 6 2.2.3 I-Electronic Relay Control (I-Heating Actuator)……………………………………………………. 10 2.3 I-Temperature Probe………………………………………………………………………………………….. 10 2.4 I-Thermostat………………… ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… ……………………………………………………….. 10

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 2

I-BIN-T
1 ISINGENISO
1.1 BIN-T
Umndeni womkhiqizo we-BIN-T ovela ku-Zennio uqukethe izinhlobonhlobo ze-KNX ezinosayizi omncane, eziklanyelwe ukufakwa, ngokwesibonelo, ngaphakathi kwamabhokisi kagesi. Avumela ukuxhuma inombolo eguquguqukayo yokokufaka kanambambili (ama-pushbutton, amaswishi) kuyilapho futhi ehlinzeka nge-LED kanye nemiphumela yokulawulwa kokudluliselwa kwe-electronic (kufika ku-12V DC, 2 mA). Ngakho-ke, idivayisi efanayo inganikeza impendulo ezibonisini ze-LED ezihlanganiswe ama-pushbutton amaningi namaswishi noma ukusebenzisa ama-relay amanje aphansi (isb, amasistimu okushisa adluliselwe). Izici ezivelele kakhulu yilezi:
2 / 4 / 6 / 8 iziteshi ezisebenza njenge-parameterisable njengokuthi: Okokufaka kanambambili I-LED Lighting Output Electronic Relay Control 1 Temperature Probe input
1 Zennio Thermostat Heartbeat noma isaziso “sisaphila” ngezikhathi ezithile. Ukuphepha kwe-KNX. Ukuze uthole ulwazi oluningiliziwe mayelana nokusebenza nokucushwa kokuphepha kwe-KNX, bheka imanuwali ethile yomsebenzisi "KNX Security", etholakala esigabeni somkhiqizo we-Zennio web ingosi (www.zennio.com).

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 3

I-BIN-T
2 UKULUNGISWA
2.1 JIKELELE
Ngemva kokungenisa i-database ehambisanayo ku-ETS nokwengeza idivayisi ku-topology yephrojekthi oyifunayo, inqubo yokumisa iqala ngokufaka ithebhu ye-Parameters yedivayisi.
I-ETS PARAMETERISATION Okuwukuphela kwesikrini esihlukanisekayo esitholakala ngokuzenzakalelayo sithi Okujwayelekile. Kulesi sikrini kungenzeka ukwenza kusebenze/uvale yonke imisebenzi edingekayo.

Umfanekiso 1. Ukucushwa okuzenzakalelayo.

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 4

I-BIN-T
Izigcawu ngemva Kokulanda [Kulungiselelwe Amapharamitha / Gcina Izigcawu Ezilondoloziwe]1: kuvumela ukuchaza ukuthi inani lezigcawu lilungiswa yini ipharamitha noma inani elilondolozwe ngaphambilini liyagcinwa ngemva kokulanda.
Qaphela: uma inketho ethi “Gcina Izigcawu Ezilondoloziwe” ilungisiwe, kodwa wukulanda kokuqala kwedivayisi noma inguqulo ehlukile kuneyamanje, amanani amiswe ipharamitha azokwamukelwa. Uma izigcawu ezintsha zengezwa ekulandweni okulandelanayo, kuzodingeka ukuthi ulande ngokuhlola inketho ethi “Kulungiselelwe Ngamapharamitha” ukuze uqinisekise ukusebenza okulungile kwalezi zigcawu.
Ukubambezeleka Kokuqalisa [0…255]: kusetha ukubambezeleka ngemva kokuqaliswa ukuze idivayisi ingaphenduli kuma-oda noma ithumele izinto ebhasini (ngaphandle kwento ye-Heartbeat, uma inikwe amandla; bona ngezansi).
Isiteshi [Okukhutshaziwe/Okokufaka kanambambili/Okukhipha Ukukhanyisa kwe-LED / Ukulawulwa Kokudluliswa Kwe-elekthronikhi (I-Actuator Yokushisa)]: amabhokisi okuhlola avumela ukukhetha ukuthi imaphi amashaneli azosebenza njengokufakwayo nokuthi imaphi amashaneli njengokuphumayo. Ngemva kokuwanika amandla, amathebhu engeziwe azohlanganiswa esihlahleni sethebhu esingakwesokunxele. Le misebenzi nemingcele yayo izochazwa ezigabeni zakamuva zalo mbhalo.
Ukushaya kwenhliziyo (Isaziso Esiphila Ngezikhathi) [kunikwe amandla / kukhutshaziwe]: ivumela isihlanganisi ukuthi sihlanganise into enebhithi eyodwa kuphrojekthi (“[Isigqi Senhliziyo] Inhloso Ethunyelwa Ukuthumela `1′”) ezothunyelwa ngezikhathi ezithile ngevelu ethi “1” ukwazisa lokho. idivayisi isasebenza (isaphila).

Umfanekiso 2. Ukushaya kwenhliziyo (Isaziso Esiphilayo Ngezikhathi).
Qaphela: ukuthumela kokuqala ngemva kokulanda noma ukwehluleka kwebhasi kwenzeka ngokubambezeleka okungafika kumasekhondi angu-255, ukuvimbela ukugcwala kwebhasi. Ukuthunyelwa okulandelayo kufana nesikhathi esimisiwe.

1 Amanani azenzakalelayo epharamitha ngayinye azogqanyiswa ngombala oluhlaza okwesibhakabhaka kulo mbhalo, ngendlela elandelayo: [okuzenzakalelayo / okunye okukhethwa kukho].

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 5

I-BIN-T
Izinto Zokutholwa Kwedivayisi (Thumela u-0 no-1) [ikhutshaziwe / inikwe amandla]: le parameter ivumela isihlanganisi senze izinto zokuxhumana ezintsha ezimbili (“[Ukushaya Kwenhliziyo] Ukubuyisela Idivayisi”), ezizothunyelwa ebhasini le-KNX ngamavelu “0” kanye “ 1” noma nini lapho idivayisi iqala ukusebenza (isibample, ngemva kokuhamba kwamandla ebhasi). Kungenzeka ukubeka ipharamitha ukubambezeleka okuthile [0…255][s] kulokhu kuthumela.

Umfanekiso 3. Izinto Zokuthola Idivayisi
Qaphela: Ngemva kokuhluleka kokudawuniloda noma kwebhasi, ukuthumela kwenzeka ngokubambezeleka okungafika kumasekhondi angu-6,35 kanye nokulibaziseka okunepharamitha, ukuvimbela ukugcwala kwebhasi.

2.2 IZITESHI

I-BIN-T 8X, 6X, 4X kanye ne-2X ihlanganisa, ngokulandelana, eyisishiyagalombili, isithupha, iziteshi zethu ezimbili zokufaka/zokukhiphayo, ngayinye yazo ilungiseka njenge:
Okokufaka Kanambambili. Bheka isigaba 2.2.1. I-LED Lighting Output. Bheka isigaba 2.2.2. I-Electronic Relay Control (I-Heating Actuator). Bheka isigaba 2.2.3. Ukwengeza, yonke i-BIN-T ihlanganisa okokufaka okukodwa kokuhlola izinga lokushisa (bona isigaba ).

2.2.1 OKUFAKAYO UNAMBAMBILI
Sicela ubhekisele kubhukwana lomsebenzisi elithi “Binary Inputs”, elitholakala esigabeni somkhiqizo we-BIN v2 eZennio. webindawo (www.zennio.com).

2.2.2 UKUPHUMA KONYAZI LWE-LED
Isilawuli sokukhanyisa izibani ze-LED sivumela ukuhamba kwe-LED ngayinye phakathi kwezifunda ezimbili: icishiwe (okungasho ukuthi “akukho kukhanya”) nokukhanyisa (okungasho ngempela ukuthi “ukukhanya kukhanyise”). Ngaphezu kwalokho, ama-LED angashintsha phakathi kwezindlela ezimbili zokusebenza: imodi evamile kanye nemodi yasebusuku. Eyesibili ingokuzithandela futhi ihlinzekelwe izimo zesikhashana nezindawo lapho ukukhanya okweqile kungase kuphazamise umsebenzisi. Ku

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 6

I-BIN-T izimo ezinjalo, kuzokwazi ukushintsha imodi ngokusebenzisa into eyibhithi eyodwa kanye/noma into yesigcawu.
Lezi zilungiselelo zivamile kuyo yonke imiphumela elungiselelwe njengama-LED. Ngokuphambene nalokho, izibali sikhathi, izinto ezikhanyayo nezimo zingahlelwa ngokuzimela ngokukhipha ngakunye.
2.2.2.1 UKULUNGISWA OKUJWAYELEKILE
Ukucushwa okuvamile kokuphumayo kwe-LED kuhlanganisa ukusetha amaleveli okukhanya ezifundazweni zokuvula nokuvala, kokubili kumodi evamile kanye nemodi yasebusuku (uma kudingeka).
I-ETS PARAMETERISATION Ithebhu yokucushwa evamile yomsebenzi we-LED Outputs inikezwa uma okungenani okukhiphayo okukodwa sekulungisiwe njengokuphuma kokukhanya kwe-LED. Le thebhu iqukethe izilungiselelo ezivamile kukho konke ukuphuma kwe-LED.

Umfanekiso 4. Imiphumela ye-LED - Ukumiswa okujwayelekile.
Imodi Ejwayelekile [inikwe amandla]: Kuleveli [0…255]: isetha inani lezinga lokukhanya lesimo. Ileveli evaliwe [0…255]: imisa amanani eziveli yokukhanya esimeni esingekho. Imodi Yasebusuku [inikwe amandla / ikhutshaziwe]: uma kwenzeka le modi idingeka, leli bhokisi likaqhwishi lidinga ukumakwa: Kuzinga [0…8…255]: lisetha amanani eziveli yokukhanya esimweni. Ileveli evaliwe [0…255]: imisa amanani eziveli yokukhanya esimeni esingekho.

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 7

Esimeni sokuvumela imodi yasebusuku, ezinye izinketho ezengeziwe zingalungiselelwa:

I-BIN-T

Umfanekiso 5. Imiphumela ye-LED - Ukucushwa Okujwayelekile - Imodi Yasebusuku
Imodi Yokukhanya ngemva kokudawuniloda kwe-ETS [Okuvamile / Ebusuku]: imisa ukuthi iyiphi kulezi zindlela ezimbili ezizosebenza ngemva kokudawuniloda kwe-ETS.
I-1-bit Object [inikwe amandla / ikhutshaziwe]: uma imakwa, kuzokwazi ukushintsha imodi ngokubhalela into kanambambili (“[LED] Imodi Yokukhanya”). Inani lepharamitha ([0 = Okuvamile; 1 = Ubusuku / 0 = Ebusuku; 1 = Okuvamile]) lizovela ukuze kukhethwe inani okufanele liqalise ukuthi iyiphi imodi.
Into Yesigcawu [ivuliwe / ikhutshaziwe]: uma imakwa, kuzokwazi ukushintsha imodi ngokubhala inani elithile lesiqephu libe yi-[LED] Scene". Amabhokisi ombhalo amabili athile azovela ukuze kufakwe ukuthi yiziphi izigcawu (1 kuya ku-64) ezizovusa imodi ngayinye.
2.2.2.2 OPHUMILEYO X: UKULUNGISWA KONYAZI LWE-LED
Njengoba sekushiwo, okukhipha ngakunye kwe-LED kuvumela ukucushwa okuzimele kwento yayo yesimo, isibali sikhathi kanye nemisebenzi ekhanyayo.
Umsebenzi Wesibali sikhathi uhlanganisa ukwenza umjikelezo owodwa, onesikhathi sokuvula/wokucisha lapho into ethile yokuqalisa itholwa.

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 8

I-BIN-T Ngakolunye uhlangothi, umsebenzi we-Flashing uhlanganisa ukwenza ukulandelana okuqhubekayo, okunesikhathi sokuvula/ukuvala lapho into ethile yokuqalisa itholwa.
I-ETS PARAMETERISATION Ithebhu ethize Yokucushwa ihlinzekwa ekukhishweni ngakunye kwe-LED okunikwe amandla. Iqukethe amapharamitha alandelayo:

Umfanekiso 6. Okukhiphayo X: Ukucushwa Kwezibani ze-LED.
Bonisa Izinto Zesimo [zinikwe amandla / zikhutshaziwe]: uma kunikwe amandla, into ye-[LEDx] ye-LED" yengezwa kuphrojekthi. Kuthatha inani `0' uma i-LED isesimweni sokucisha futhi ibiza `1′ uma i-LED isesimweni. Le nto ithunyelwa ebhasini noma nini lapho isimo sibuyekezwa.
Nika amandla Isibali sikhathi [sinikwe amandla / sikhutshaziwe]: sivumela umsebenzi wesibali sikhathi. Kubude besikhathi [0…5…255]: isetha ukuthi singakanani isikhathi okukhiphayo okuzohlala kusesimweni uma isibali sikhathi sesicushiwe. Uma kusethelwe kuziro, okukhiphayo ngeke kucishwe ngemva kwalokho.
Nika amandla i-Flashing [kunikwe amandla / kukhutshaziwe]: inika amandla umsebenzi okhanyayo. Ngobude besikhathi [1…5…255]: ubude bokuthi “ku” isigaba ngasinyetage. Isikhathi Sokucisha [1…5…255]: ubude besigaba ngasinye sokuthi “ku-”tage.
Izinto ezilandelayo nazo zihlobene nokusebenza kokukhishwayo ngakunye kwe-LED:
“[I-LEDx] Ivuliwe/Ivaliwe” (kanambambili): uma ithola inani elithi “1”, i-LED izoshintshela esimweni esivuliwe, kuyilapho inani elithi “0” lizoyivala.

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 9

I-BIN-T “[i-LEDx] Ivuliwe/Ivaliwe” (kanambambili): yenza ukulawula okuphambene kwe-LED. Uma ithola inani elithi “0”, i-LED izoshintshela kusimo, kuyilapho inani elithi “1” lizoyivala. “[I-LEDx] Isikhathi” (kanambambili): uma ithola inani elithi “1”, umsebenzi wesibali sikhathi se-LED uzoqala, kuyilapho inani elithi “0” lizowumisa. “[I-LEDx] Flashing” (kanambambili): uma ithola inani elithi “1”, umsebenzi wokukhanyisa we-LED uzoqalisa, kuyilapho inani elithi “0” lizowumisa.
2.2.3 UKULAWULWA KWE-ELECTRONIC RELAY (I-HEATING ACTUATOR)
Sicela ubheke “I-Electronic Relay Control in Heating Systems” imanuwali, etholakala esigabeni somkhiqizo we-BIN v2 eZennio. webindawo, www.zennio.com.
Qaphela: I-BIN v2 ayisebenzisi lezi zinketho ezilandelayo, nakuba zifakiwe kumbhalo ongenhla:
Isaziso sokulayisha ngokweqile/isiyingi esifushane.
Ukubambezeleka kokuqalisa (ukubambezeleka okuvamile kokuqalisa kusetshenziswa esikhundleni salokho; bona isigaba 2.1).
2.3 CWANINGO LWETEMSHA
Ukucushwa kokuxhumeka kwenzwa eyodwa yezinga lokushisa kusuka ku-Zennio. Sicela ubheke “i-Temperature Probe” yomsebenzisi imanuwali, etholakala ngaphansi kwesigaba somkhiqizo ku-www.zennio.com.
2.4 I-THERMOSTAT
I-BIN-T isebenzisa i-thermostat eyodwa, enganikwa amandla futhi ilungiselelwe ngokuzimela.
Sicela, ubheke imanuwali yomsebenzisi ethi “Thermostat” etholakala ngaphansi kwanoma yimuphi umndeni we-BIN-T engxenyeni yomkhiqizo ekhasini eliyisiqalo le-Zennio (www.zennio.com) ukuze uthole ulwazi oluningiliziwe mayelana nokusebenza kanye nokucushwa kwemingcele ehlobene.

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 10

I-BIN-T
ISITHASISELO I. IZINTO ZOKUXHUMANA

“Ibanga elisebenzayo” libonisa amanani okuthi, ngokuzimela kwanoma yimaphi amanye amanani avunyelwe ibhasi ngokosayizi wento, angase abe noma yikuphi ukusetshenziswa noma abe nencazelo ethile ngenxa yokucaciswa noma imikhawulo evela kokubili izinga le-KNX noma uhlelo lokufaka isicelo. uqobo. Ithebula elilandelayo linazo zonke izinto ze-BIN-T 8X, izinombolo eziningi ngeke zitholakale kunguqulo yeziteshi ezingu-6, 4 nezi-2 zomndeni we-BIN-T.

Inombolo 1 2 3
4, 10, 16, 22, 28, 34, 40, 46
5, 11, 17, 23, 29, 35, 41, 47

Usayizi 1 Ibhithi 1 Ibhithi 1 Ibhithi

I/OOOO

Amafulegi CR – TCR – TCR – T –

1 Ibhithi IC - W - -

Ibhithi engu-1 Ibhithi engu-1 Ibhithi engu-1 Ibhithi engu-1 Ibhithi engu-1

OC–TO C–TI C-WTO C–TO C–T-

1 Bit OC – – T –

1 Bit OC – – T –

1 Bit OC – – T –

1 Bit OC – – T –

Uhlobo lwedatha (DPT) DPT_Trigger DPT_Trigger DPT_Trigger DPT_Vumela i-DPT_Switch DPT_Switch DPT_Switch DPT_UpDown DPT_UpDown DPT_UpDown
DPT_Isinyathelo
DPT_Isinyathelo
DPT_Isinyathelo

4 Bit OC – – T – DPT_Control_Dimming

4 Bit OC – – T – DPT_Control_Dimming

4 Bit OC – – T – DPT_Control_Dimming

1 Ibhithi OC – – T 1 Ibhithi OC – – T 1 Ibhithi IC – WT 1 Ibhayithi OC – – T 1 Ibhayithi OC – – T –

DPT_Switch DPT_Switch DPT_Switch DPT_SceneControl DPT_SceneControl

Ububanzi Bokusebenza 0/1 0/1 0/1
0/1
0/1 0/1 0/1 0/1 0/1
0/1
0/1
0/1
0/1
0x0/0x8 (Misa) 0x1…0x7 (Dec.) 0x9…0xF (Inc.) 0x0/0x8 (Misa) 0x1…0x7 (Dec.) 0x9…0xF (Inc.) 0x0/0x8 (Misa) 0x1…0x7 (Dec.) Dec.) 0x9…0xF (Inc.)
0/1 0/1 0/1 0-63; 128-191 0-63; 128-191

Igama [Ukushaya kwenhliziyo] Into Ezothunyelwa '1' [Ukushaya kwenhliziyo] Ukutholwa Kwedivayisi [Ukushaya kwenhliziyo] Ukutholwa Kwedivayisi

Ukuthumela Umsebenzi wokuthi '1' Thumela ngezikhathi ezithile 0 Thumela 1

[Ix] Ukhiye Wokufaka

0 = Vula; 1 = Khiya

[Ix] [I-Short Press] 0

Ukuthunyelwa kwe-0

[Ix] [I-Short Press] 1

Ukuthunyelwa kwe-1

[Ix] [I-Short Press] 0/1 Ukushintsha

Shintshanisa amasheya 0/1

[Ix] [Cindezela Okufushane] Ukuthunyelwa Kweshutha Phezulu kokungu-0 (Phezulu) [Ix] [Cindezela Okufushane] Ukuthumela Ishutha Phansi koku-1 (Phansi) [Ix] [Cindezela Okufushane] Hambisa Phezulu/Phansi Ukuvala

Ukushintsha 0/1 (Phezulu/Phansi)

[Ix] [Cindezela Isikhashana] Misa/Nyathela phezulu Isivalo

Ukuthunyelwa kwe-0 (Yima/Nyathela)

[Ix] [Cindezela iDemo] Misa/Shiya Shutter

Ukuthunyelwa koku-1 (Yima/Yehla)

[Ix] [Cindezela iDemo] Ukushintshwa kweStop/step Shutter ka-0/1 (Yima/Isinyathelo

(Kushintshiwe)

Phezulu phansi)

[Ix] [I-Short Press] Ikhanya Kakhudlwana

Khulisa Ukugqama

[Ix] [I-Short Press] Kumnyama

Yehlisa Ukugqama

[Ix] [I-Short Press] Kukhanya/Kumnyama
[Ix] [I-Short Press] Khanyisa ukukhanya [Ix] [I-Short Press] Khanyisa [Ix] [I-Short Press] Khanyisa/Cisha [Ix] [Cindezela okufushane] Run Scene [Ix] [Cindezela kafushane] Londoloza Isigcawu

Shintsha Okukhanyayo/Kumnyama
Ukuthunyelwa koku-1 (Kuvuliwe) Ukuthunyelwa kuka-0 (Kucishiwe) Ukushintsha 0/1 Ukuthunyelwa kuka-0 – 63 Ukuthunyelwa kwe-128 – 191

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 11

I-BIN-T

6, 12, 18, 24, 30, 36, 42, 48
7, 13, 19, 25, 31, 37, 43, 49

1 Bit I/OCRWT 1 Ibhayithi OC – – T –

1 Byte OC – – T –

2 Amabhayithi OC – – T –

2 Amabhayithi O 2 Amabhayithi O 1 Ibhayithi I

C – – TCR – TC – W – –

1 Byte IC – W – –
1 Ibhithi OCR – T 1 Ibhithi OC – – T 1 Ibhithi OC – – T 1 Ibhithi IC – WT 1 Ibhithi OC – – T 1 Ibhithi OC – – T –
1 Bit OC – – T –

1 Bit OC – – T –

1 Bit OC – – T –

1 Bit OC – – T –

4 Bit OC – – T –

4 Bit OC – – T –

4 Bit OC – – T –
1 Ibhithi OC – – T 1 Ibhithi OC – – T 1 Ibhithi IC – WT 1 Ibhayithi OC – – T 1 Ibhayithi OC – – T –
I-1 Bit OCR – T –

I-DPT_Switch DPT_Value_1_Ucount
I-DPT_Scaling
I-DPT_Value_2_Ucount
9.xxx DPT_Value_2_Ucount
I-DPT_Scaling
I-DPT_Scaling DPT_Value_1_Ucount
DPT_Switch DPT_Switch DPT_Switch DPT_UpDown DPT_UpDown Down DPT_UpDown
DPT_Isinyathelo
DPT_Isinyathelo
DPT_Isinyathelo
I-DPT_Control_Dimming
I-DPT_Control_Dimming
I-DPT_Control_Dimming
DPT_Switch DPT_Switch DPT_Switch DPT_SceneControl DPT_SceneControl DPT_Alarm

0/1

[Ix] [Shintsha/Inzwa] Umphetho

0 – 255

[Ix] [I-Short Press] Inani Eliqhubekayo (Integer)

0% - 100%

[Ix] [I-Short Press] Inani Eliqhubekayo (Amaphesentitage)

0 – 65535

[Ix] [I-Short Press] Inani Eliqhubekayo (Integer)

671088.64-670433.28

[Ix] [I-Short Press] Inani Eliqhubekayo (Float)

0 – 65535

[Ix] [I-Pulse Counter] Ikhawunta

0% - 100%

[Ix] [Cindezela iDemo] Isimo sokuvala (Okokufaka)

0% - 100%

[Ix] [Cindezela iDemo] Isimo Sokufiphala (Okokufaka)

0 – 255

[Ix] [I-Pulse Counter] Ikhawunta

0/1

[Ix] [Cindezela isikhathi eside] 0

0/1

[Ix] [Cindezela isikhathi eside] 1

0/1

[Ix] [Cindezela isikhathi eside] 0/1 Ukushintsha

0/1

[Ix] [Cindezela isikhathi eside] Hambisa Isivalo Esiphezulu

0/1

[Ix] [Cindezela isikhathi eside] Hambisa Isishutha Phansi

0/1

[Ix] [Cindezela isikhathi eside] Hambisa Phezulu/Phansi Isivalo

0/1

[Ix] [Cindezela isikhathi eside] Misa/Nyusa i-Shutter

0/1

[Ix] [Cindezela isikhathi eside] Misa/Yehlisa Isivalo

0/1

[Ix] [Cindezela isikhathi eside] I-Stop/Step Shutter (Ishintshiwe)

0x0/0x8 (Stop) 0x1…0x7 (Dec.) 0x9…0xF (Inc.)

[Ix] [Cindezela Isikhathi Eside] Kukhanya Kakhudlwana

0x0/0x8 (Stop) 0x1…0x7 (Dec.) 0x9…0xF (Inc.)

[Ix] [Cindezela isikhathi eside] Kumnyama

0x0/0x8 (Stop) 0x1…0x7 (Dec.) 0x9…0xF (Inc.)

[Ix] [Cindezela isikhathi eside] Kukhanya/Kumnyama

0/1

[Ix] [Cindezela isikhathi eside] Khanyisa

0/1

[Ix] [Cindezela isikhathi eside] Khanyisa Valiwe

0/1

[Ix] [Cindezela isikhathi eside] Khanyisa/Vala

0-63; 128-191

[Ix] [Cindezela isikhathi eside] Run Scene

0-63; 128-191

[Ix] [Cindezela isikhathi eside] Gcina Isigcawu

0/1

[Ix] [Shintsha/Inzwa] I-alamu: Ukwehlukana noma i-Sabotage

Ukuthunyelwa kwe-0 noma i-1 0 - 255
0% - 100%
0 – 65535
I-Float Value Number of Pulses 0% = Phezulu; 100% = Ngezansi
0% - 100% Inani lama-Pulses Ukuthunyelwa kwe-0 Ukuthunyelwa koku-1 Ukushintsha 0/1 Ukuthunyelwa kwe-0 (Phezulu) Ukuthunyelwa koku-1 (Phansi) Ukushintsha 0/1 (Phezulu/Phansi)
Ukuthunyelwa kwe-0 (Yima/Nyathela)
Ukuthunyelwa koku-1 (Yeka/Yehla) Ukushintsha okungu-0/1 (Yima/Yehla/Yehla)
Long Pr. -> Okugqamile; Khipha -> Misa
Long Pr. -> Okumnyama; Khipha -> Misa
Long Pr. -> Kukhanya/Kumnyama; Ukukhishwa -> Misa Ukuthunyelwa Koku-1 (Kuvuliwe) Ukuthunyelwa kuka-0 (Kucishiwe) Ukushintsha 0/1 Ukuthunyelwa kwe-0 – 63 Ukuthunyelwa kwe-128 – 191 1 = I-alamu; 0 = Ayikho i-alamu

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 12

I-BIN-T

2 Amabhayithi OC – – T –

2 Amabhayithi OC – – T –

1 Byte OC – – T –

1 Byte OC – – T –

8, 14, 20, 26, 32, 38, 44, 50

1 Ibhithi OC – – T 1 Ibhithi OC – – T 1 Ibhithi IC – WT 1 Ibhithi OC – – T 1 Ibhayithi OC – – T 1 Ibhithi OC – – T 1 Ibhithi IC – W – –

9, 15, 21, 27, 33, 39, 45, 51

1 Byte I 1 Byte I

C – W – C – W – –

52, 57, 62, 67, 72, 77, 82, 87

1 ibhithi

I

53, 58, 63, 68, 73, 78, 83, 88

1 ibhithi

I

54, 59, 64, 69, 74, 79, 84, 89

1 ibhithi

O

55, 60, 65, 70, 75, 80, 85, 90

1 ibhithi

I

56, 61, 66, 71, 76, 81, 86, 91

1 ibhithi

I

1 kancane I92
1 kancane I

93

1 Byte I

1 ibhithi O94
1 ibhithi O

95

1 Byte O

96

1 Byte I

97, 109, 121, 133, 145, 157, 169, 181

1 ibhithi

O

98, 110, 122, 134, 146, 158, 170, 182

1 ibhithi

O

99, 111, 123, 135, 147, 159, 171, 183

1 ibhithi

I

100, 112, 124, 136, 148, 1 Bit I

C – W – –
C – W – –
CR – T –
C – W – –
C – W – C – W – C – W – C – W – CR – TCR – TCR – TC – W – CR – T –
CR – T –
C – W – C – W – –

9.xxx
I-DPT_Value_2_Ucount
I-DPT_Scaling
DPT_Value_1_Ucount DPT_Switch DPT_Switch DPT_Switch
I-DPT_SceneControl DPT_SceneControl
DPT_Trigger DPT_Setha kabusha i-DPT_Scaling
I-DPT_Scaling
DPT_Shintsha
I-DPT_Scene_AB
DPT_Shintsha
DPT_Qala
DPT_Qala i-DPT_DayNight DPT_DayNight DPT_SceneNumber
DPT_Bool DPT_Bool DPT_Scaling DPT_Scaling DPT_Alarm
I-DPT_Alamu
DPT_Vumela i-DPT_Alarm

671088.64-670433.28

[Ix] [Cindezela isikhathi eside] Inani eliqhubekayo (Float)

I-Float Value

0 – 65535

[Ix] [Cindezela isikhathi eside] Inani eliqhubekayo (Integer)

0 – 65535

0% - 100%

[Ix] [Cindezela isikhathi eside] Inani eliqhubekayo (Percentage)

0% - 100%

0 – 255

[Ix] [Cindezela isikhathi eside] Inani eliqhubekayo (Integer)

0 – 255

0/1

[Ix] [Cindezela kabili] 0

Ukuthunyelwa kwe-0

0/1

[Ix] [Cindezela kabili] 1

Ukuthunyelwa kwe-1

0/1

[Ix] [Cindezela Kabili] 0/1 Ukushintsha

Shintshanisa amasheya 0/1

0-63; 128-191

[Ix] [Cindezela Kabili] Londoloza Isigcawu

Ukuthunyelwa kwe-128 - 191

0-63; 128-191

[Ix] [Cindezela Kabili] Run Scene

Ukuthunyelwa kwe-0 - 63

0/1

[Ix] [Cindezela Isikhathi Eside/Khipha] Misa Ukukhishwa Kweshutha -> Misa Isivalo

0/1

[Ix] [I-Pulse Counter] Setha kabusha

0 = Akukho Isenzo; 1 = Hlela kabusha

0% - 100%

[Ix] [Cindezela isikhathi eside] Isimo Sokufiphala (Okokufaka)

0% - 100%

0% - 100%

[Ix] [Cindezela isikhathi eside] Isimo sokuvala (Okokufaka)

0% = Phezulu; 100% = Ngezansi

0/1

[LEDx] Vuliwe/Valiwe

0 = Valiwe; 1 = Vuliwe

0/1

[LEDx] Ivuliwe/Ivaliwe

0 = Vuliwe; 1 = Valiwe

0/1

[LEDx] Vuliwe/Valiwe (Isimo)

0 = Valiwe; 1 = Vuliwe

0/1

[LEDx] Isikhathi

0 = Cisha; 1 = Vula

0/1
0/1 0/1 0 – 63 0/1 0/1 0% – 100% 0% – 100%
0/1

[LEDx] Iyakhanya
[LED] Imodi Yokukhanya [LED] Imodi Yokukhanya [LED] Isigcawu [HC] Wonke Amavaluvu Avaliwe [HC] Wonke Amavavu Avaliwe [HC] Max. Ukulawula Inani (Okukhiphayo) [HC] Ubukhulu. Lawula inani (Okokufaka)
[HCx] Iphutha Lesekethe Efushane

0 = Yima; 1 = Qala
0 = Okuvamile; 1 = Ubusuku 0 = Ubusuku; 1 = Okuvamile 1 – 64 0 = Amanga; 1 = Iqiniso 0 = Iqiniso; 1 = Amanga 0 – 100 % 0 – 100 %
0 = Alikho Iphutha; 1 = Iphutha

0/1

[HCx] Iphutha Lokulayisha Okungaphezulu

0 = Alikho Iphutha; 1 = Iphutha

0/1

[HCx] Khiya

0/1

[HCx] I-alamu

0 = Vula; 1 = Khiya 0 = Ayikho i-alamu; 1 = I-alamu

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 13

I-BIN-T

160, 172, 184
101, 113, 125, 137, 149, 161, 173, 185

Ibhithi engu-1 Ibhithi engu-1 Ibhithi engu-1

I CWI CWI CW–

102, 114, 126, 138, 150, 162, 174, 186

I-1 Bit 1 Bit

I CWI CW-

103, 115, 127, 139, 151, 163, 175, 187

1 ibhithi

O

104, 116, 128, 140, 152, 164, 176, 188

1 ibhithi

O

105, 117, 129, 141, 153, 1 Bit I

165, 177, 189

1 kancane I

106, 118, 130, 142, 154, 1 Bit O

166, 178, 190

1 ibhithi O

107, 119, 131, 143, 155, 167, 179, 191

1 Byte

I

108, 120, 132, 144, 156, 168, 180, 192

1 Byte

O

CR – T –
CR – TC – W – C – W – CR – TCR – TC – W – –
CR – T –

193

2 Amabhayithi OCR – T –

194

I-1 Bit OCR – T –

195

I-1 Bit OCR – T –

196

I-1 Bit OCR – T –

197

1 Byte IC – W – –

198

2 Amabhayithi IC – WTU

199

2 Amabhayithi IC – WTU

200

2 Amabhayithi OCR – T –

I-DPT_Alarm DPT_Alarm DPT_Alarm
DPT_Ack
DPT_Ack
I-DPT_Bool
DPT_State DPT_Switch DPT_OpenClose DPT_Switch DPT_OpenClose DPT_Scaling
I-DPT_Scaling
I-DPT_Value_Temp DPT_Alarm DPT_Alarm DPT_Alarm
DPT_SceneControl DPT_Value_Temp DPT_Value_Temp DPT_Value_Temp

201

1 Byte IC – W – –

I-DPT_HVACMode

202 203 204 205 206

Ikhaya En

Ibhithi eyodwa 1 Ibhithi 1 Ibhithi 1 Ibhithi 1 Ibhithi

I CWI CWI CWI CWI CWI CWI CWI CWI CWI CWI CW–

DPT_Ack DPT_Switch
DPT_Ack DPT_Switch
DPT_Ack DPT_Switch
DPT_Ack DPT_Switch DPT_Window_Door

0/1

[HCx] I-alamu

0/1

[HCx] I-alamu x

0/1

[HCx] I-alamu x

0/1

[HCx] I-alamu yokungafrizi

0/1

[HCx] I-alamu yokungafrizi

0 = I-alamu; 1 = Ayikho i-alamu 0 = Ayikho i-alamu; 1 = I-alamu 0 = I-alamu; 1 = Ayikho I-alamu = Ayikho I-alamu + Ungafrizi (1) -> I-alamu Yokuqeda = I-alamu 2 = Ayikho I-alamu + Ungafrizi (1) -> I-alamu yokuqeda

0/1

[HCx] Ukulawula Inani – Iphutha

0 = Alikho Iphutha; 1 = Iphutha

0/1
0/1 0/1 0/1 0/1
0% - 100%

[HCx] I-Anti-Seize Protection
[HCx] Inani Lokulawula – ibhithi elingu-1 [HCx] Inani Lokulawula – ibhithi elingu-1 [HCx] Inani Lokulawula – ibhithi elingu-1 (Isimo) [HCx] Inani Lokulawula – ibhithi elingu-1 (Isimo)
[HCx] Inani lokulawula – ibhayithi elingu-1

0 = Ayisebenzi; 1 = Iyasebenza
0 = Vala Valve; 1 = Vula i-Valve 0 = Vula i-Valve; 1 = Vala iValve 0 = Ivaliwe; 1 = Vula 0 = Vula; 1 = Ivaliwe
0 - 100 %

0% - 100%

[HCx] Ukulawula Inani – 1 byte (Isimo) 0 – 100 %

-273.00º - 670433.28º
0/1 0/1 0/1

[I-Temperature Probe] Izinga Lokushisa Lamanje [I-Temperature Probe] Ukupholisa Kakhulu [I-Temperature Probe] Ukushisisa ngokweqile [I-Temperature Probe] Iphutha Lokuhlola

0-63; 128-191

[I-Thermostat] Izigcawu

-273.00º - 670433.28º -273.00º - 670433.28º -273.00º - 670433.28º
1=Induduzo 2=Ukulinda 3=Umnotho 4=Ukuvikelwa Kwezakhiwo
0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1

[T1] Umthombo Wezinga lokushisa 1 [T1] Umthombo Wezinga lokushisa 2 [T1] Izinga lokushisa Elisebenzayo
[T1] Imodi Ekhethekile
[T1] Imodi Ekhethekile: I-Comfort [T1] Imodi Ekhethekile: I-Comfort [T1] Imodi Ekhethekile: Imodi Elindile [T1] Imodi Ekhethekile: Imodi Elindile [T1] Imodi Ekhethekile: Umnotho [T1] Imodi Ekhethekile: Umnotho [T1] Imodi Ekhethekile: Ukuvikelwa [ T1] Imodi Ekhethekile: Ukuvikela [T1] Isimo Sewindi (Okokufaka)

Inani Lenzwa Yezinga lokushisa
0 = Ayikho i-alamu; 1 = I-alamu 0 = Ayikho i-alamu; 1 = I-alamu 0 = Ayikho i-alamu; 1 = I-alamu 0 63 (Khipha 1 64); 128 191 (Londoloza 1 64) Inzwa Yangaphandle Izinga lokushisa Inzwa Yangaphandle Izinga Lokushisa Elisebenzayo Lokulawula Ukushisa
1-Byte Imodi ye-HVAC
0 = Lutho; 1 = Qalisa 0 = Valiwe; 1 = Ku-0 = Lutho; 1 = Qalisa 0 = Valiwe; 1 = Ku-0 = Lutho; 1 = Qalisa 0 = Valiwe; 1 = Ku-0 = Lutho; 1 = Qalisa 0 = Valiwe; 1 = Ku-0 = Kuvaliwe; 1 = Vula

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 14

207
208
209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224, 230 225, 231
226, 232
227, 233
228, 234
229, 235

I-BIN-T

1 Ibhithi IC - W - -

I-1 Byte OCR – T –

2 Amabhayithi I 2 Amabhayithi I

C – W – C – W – –

1 Ibhithi IC - W - -

2 Amabhayithi I 2 Amabhayithi O 2 Amabhayithi O 2 Amabhayithi O
Ibhithi elingu-1 I-1 I-Bit I-1 I-Bit engu-1 I-Bit eyi-1 I-Bit eyi-1 I-Bit engu-1

C – W – CR – TCR – TCR – TC – W – C – W – C – W – CR – TC – W – CR – TCRW – CRW – –

1 Ibhithi IC - W - -

1 kancane I
1 Ibhayithi O 1 Ibhithi O 1 Ibhithi O 1 Ibhithi O 1 Ibhithi O 1 Ibhithi O 1 Ibhithi O 1 Ibhithi O 1 Ibhithi O
1 ibhithi O

C – W – –
I-CR – TCR – TCR – TCR – TCR – TCR – TCR – TCR – TCR – T –
CR – T –

I-1 Bit OCR – T –

I-1 Bit OCR – T –

DPT_Trigger
I-DPT_HVACMode
I-DPT_Value_Temp DPT_Value_Temp
DPT_Step DPT_Value_Tempd DPT_Value_Temp DPT_Value_Temp DPT_Value_Tempd
DPT_Setha kabusha i-DPT_Setha kabusha i-DPT_Heat_Cool DPT_Heat_Cool DPT_Switch DPT_Switch DPT_Switch DPT_Switch DPT_Enable
DPT_Vumela i-DPT_Scaling DPT_Scaling DPT_Scaling DPT_Switch DPT_Switch DPT_Switch DPT_Switch DPT_Switch DPT_Switch DPT_Switch
DPT_Shintsha
DPT_Shintsha

0/1

[T1] Ukunethezeka Kwenduduzo

0 = Lutho; 1 = Induduzo Enesikhathi

1=Induduzo 2=Ukulinda 3=Umnotho 4=Ukuvikelwa Kwezakhiwo

[T1] Isimo Semodi Ekhethekile

1-Byte Imodi ye-HVAC

-273.00º - 670433.28º [T1] Indawo yokubeka

Okokufaka kwe-Thermostat Setpoint

-273.00º - 670433.28º [T1] I-Basic Setpoint

I-Reference Setpoint

0/1

[T1] Isinyathelo se-Setpoint

0 = Nciphisa I-Setpoint; 1 = Nyusa i-Setpoint

-671088.64º - 670433.28º [T1] I-Setpoint Offset

I-Float Offset Value

-273.00º - 670433.28º [T1] Isimo Sephoyinti

I-Setpoint yamanje

-273.00º - 670433.28º [T1] Isimo Sephoyinti Eyisisekelo

I-Basic Setpoint yamanje

-671088.64º - 670433.28º [T1] Setpoint Offset Status

I-Setpoint Offset yamanje

0/1

[T1] Setha kabusha iphoyinti

Setha kabusha i-Setpoint ibe Okuzenzakalelayo

0/1

[T1] Setha kabusha i-Offset

Setha kabusha i-Offset

0/1

[T1] Imodi

0 = Kupholile; 1 = Ukushisa

0/1

[T1] Isimo Semodi

0 = Kupholile; 1 = Ukushisa

0/1

[T1] Vuliwe/Valiwe

0 = Valiwe; 1 = Vuliwe

0/1

[T1] Isimo Sokuvula/Ukuvala

0 = Valiwe; 1 = Vuliwe

0/1

[T1] Isistimu Eyinhloko (Epholile)

0 = Uhlelo 1; 1 = Uhlelo 2

0/1

[T1] Isistimu Eyinhloko (Ukushisa)

0 = Uhlelo 1; 1 = Uhlelo 2

0/1

[T1] Nika amandla/Khubaza (Kupholile)

Okwesibili

Uhlelo

0

=

Khubaza;

1

=

Nika amandla

0/1

[T1] Nika amandla/Khubaza (Ukushisa)

Okwesibili

Uhlelo

0

=

Khubaza;

1

=

Nika amandla

0% - 100%

[T1] [Sx] Control Variable (Kupholile)

Ukulawulwa kwe-PI (Okuqhubekayo)

0% - 100%

[T1] [Sx] Control Variable (Ukushisa)

Ukulawulwa kwe-PI (Okuqhubekayo)

0% - 100%

[T1] [Sx] Control Variable

Ukulawulwa kwe-PI (Okuqhubekayo)

0/1

[T1] [Sx] Control Variable (Kupholile)

2-Iphuzu Ukulawula

0/1

[T1] [Sx] Control Variable (Kupholile)

I-PI Control (PWM)

0/1

[T1] [Sx] Control Variable (Ukushisa)

2-Iphuzu Ukulawula

0/1

[T1] [Sx] Control Variable (Ukushisa)

I-PI Control (PWM)

0/1

[T1] [Sx] Control Variable

2-Iphuzu Ukulawula

0/1

[T1] [Sx] Control Variable

I-PI Control (PWM)

0/1

[T1] [Sx] PI State (Epholile)

0 = PI Isiginali 0%; 1 = Isignali ye-PI Ingaphezu kuka-0%

0/1

[T1] [Sx] PI State (Ukushisa)

0 = PI Isiginali 0%; 1 = Isignali ye-PI Ingaphezu kuka-0%

0/1

[T1] [Sx] PI State

0 = PI Isiginali 0%; 1 = Isignali ye-PI Ingaphezu kuka-0%

Ikhaya En

Ukusekelwa Kobuchwepheshe: https://support.zennio.com 15

Joyina futhi usithumele imibuzo yakho mayelana namadivayisi we-Zennio:
https://support.zennio.com
I-Zennio Avance y Tecnología SL C/ Río Jarama, 132. Nave P-8.11 45007 Toledo, Spain. Ucingo. +34 925 232 002 www.zennio.com info@zennio.com

Amadokhumenti / Izinsiza

I-Zennio ZIOBINT Series LED kanye ne-Electronic Relay Control Outputs [pdf] Imaniwali yosebenzisayo I-ZIOBINT8, ZIOBINT6, ZIOBINT4, ZIOBINT2, ZIOBINT Series LED kanye ne-Electronic Relay Control Outputs, ZIOBINT Series, LED and Electronic Relay Control Outputs, Electronic Relay Control Outputs, Relay Control Outputs, Control Outputs, Okukhiphayo

Izithenjwa

• Imaniwali yosebenzisayo