Okuqukethwe fihla
1 I-XGT XGL-PMEB Isilawuli Sengqondo Ehlelekayo
2 Imiyalo yokusetshenziswa komkhiqizo
3 FAQ
4 Izinyathelo Zokuphepha
5 Indawo yokusebenza
6 Isoftware Yokusekela Esebenzayo
7 Izesekeli kanye Nemininingwane Yekhebula
8 Igama lezingxenye kanye nobukhulu (mm)
9 Ifaka Amamojula Okukhipha
10 Izintambo
11 Iwaranti
12 CONTACT
13 Amadokhumenti / Izinsiza
13.1 Izithenjwa

I-XGT-LOGO

I-XGT XGL-PMEB Isilawuli Sengqondo Ehlelekayo

I-XGT-XGL-PMEB-Programmable-Logic-Controller-product

Imiyalo yokusetshenziswa komkhiqizo

  • Qinisekisa ukuthi i-PLC ivaliwe ngaphambi kokufakwa.
  • Faka i-XGT Pnet XGL-PMEB ngokuvikelekile endaweni efanelekile.
  • Xhuma izintambo ezidingekayo ngokomdwebo onikeziwe.
  • Finyelela kusixhumi esibonakalayo sokuhlela usebenzisa isofthiwe enikeziwe.
  • Bhala ingqondo yakho oyifunayo kanye nemisebenzi ngokusekelwe kuhlelo lwakho lokusebenza.
  • Hlola uhlelo kahle ngaphambi kokusetshenziswa.

Isondlo

  1. Hlola njalo noma yikuphi ukuxhumeka okuxekethile noma izimpawu zokuguga.
  2. Hlanza i-PLC nendawo ezungezile ukuze uvimbele ukunqwabelana kothuli.
  3. Landela ishejuli yokulungisa enikezwe kumanuwali yomsebenzisi.

FAQ

  • Q: Yini okufanele ngiyenze uma i-PLC ibonisa ikhodi yephutha?
  • A: Bheka kumanuwali yomsebenzisi ukuze uthole uhlu lwamakhodi amaphutha nezixazululo ezingaba khona. Uma inkinga iqhubeka, xhumana nokwesekwa kwamakhasimende ukuze uthole usizo.
  • Q: Ngingakwazi ukukhulisa okokufaka kanye nokuphumayo kwe-PLC?
  • A: Yebo, ungakwazi ukwandisa umthamo we-I/O ngokungeza amamojula engeziwe ahambisana nochungechunge lwe-XGT. Bheka imibhalo yomkhiqizo ukuze uthole ulwazi olwengeziwe ngezinketho zokunweba.

Lo mhlahlandlela wokufaka uhlinzeka ngolwazi olulula lomsebenzi noma ukulawula kwe-PLC. Sicela ufunde ngokucophelela leli phepha ledatha namamanyuwali ngaphambi kokusebenzisa imikhiqizo. Ikakhulukazi funda izinyathelo zokuphepha bese uphatha imikhiqizo ngendlela efanele.

Izinyathelo Zokuphepha

Incazelo yelebula yesixwayiso nesixwayiso

  • ISEXWAYISO kukhombisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekufeni noma ekulimaleni okubi kakhulu
  • ISEXWAYISO ikhombisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekulimaleni okuncane noma okulingene. Ingase futhi isetshenziselwe ukuxwayisa ngemikhuba engaphephile

ISEXWAYISO

  1. Ungaxhumani namatheminali ngenkathi kusetshenziswa amandla.
  2. Qiniseka ukuthi azikho izindaba zensimbi zangaphandle.
  3. Ungalisebenzisi kabi ibhethri(shaja, qaqa, ukushaya, mfushane, ukusoda).

ISEXWAYISO

  1. Qiniseka ukuthi ubheka ivolumu elinganisiwetage kanye nokuhlelwa kwetheminali ngaphambi kokufakwa kwezintambo
  2. Lapho ufaka izintambo, qinisa isikulufu sebhulokhi yetheminali ngobubanzi betorque obushiwo
  3. Ungafaki izinto ezivuthayo endaweni ezungezile
  4. Ungayisebenzisi i-PLC endaweni yokudlidliza okuqondile
  5. Ngaphandle kwabasebenzi besevisi abangochwepheshe, ungawuhlakazi noma ulungise, noma uguqule umkhiqizo
  6. Sebenzisa i-PLC endaweni ehlangabezana nemininingwane evamile equkethwe kule datha yedatha.
  7. Qiniseka ukuthi umthwalo wangaphandle aweqi isilinganiso semojuli yokuphumayo.
  8. Lapho ulahla i-PLC nebhethri, kuphathe njengodoti wezimboni.
  9. Isiginali ye-I/O noma ulayini wokuxhumana uzoxhunywa okungenani i-100mm kude nevolthi ephezulutagikhebula le-e noma ulayini wamandla.

Indawo yokusebenza

Ukuze ufake, bheka izimo ezingezansi.

Cha Into Ukucaciswa Okujwayelekile
1 I-Ambient temp. 0 ~ 55℃ –
2 Izinga lokushisa lesitoreji. -25 ~ 70℃ –
3 Umswakama we-ambient 5 ~ 95%RH, ayinciphisi –
4 Umswakama wesitoreji 5 ~ 95%RH, ayinciphisi –
 

 

 

 

5

  

 

 

Ukumelana Nokudlidliza

 Ukudlidliza ngezikhathi ezithile – –
Imvamisa Ukusheshisa Ampukufunda Izikhathi  

 

 

I-IEC 61131-2
5≤f<8.4㎐ – 3.5 mm Izikhathi eziyi-10 ohlangothini ngalunye

okwe

X kanye no-Z
8.4≤f≤150㎐ 9.8㎨(1g) –
Ukudlidliza okuqhubekayo
Imvamisa Ukusheshisa Ampukufunda
5≤f<8.4㎐ – 1.75 mm
8.4≤f≤150㎐ 4.9㎨(0.5g) –

Isoftware Yokusekela Esebenzayo

Ngokucushwa kwesistimu, inguqulo elandelayo iyadingeka.

  1. I-XGI CPU: V2.0 noma ngaphezulu
  2. I-XGK CPU: V2.0 noma ngaphezulu
  3. I-XGR CPU: V1.0 noma ngaphezulu
  4. Isofthiwe ye-XG5000 : V4.2 noma ngaphezulu

Izesekeli kanye Nemininingwane Yekhebula

Hlola i-Profibus Connector equkethwe ebhokisini

  1. Ukusetshenziswa: I-Profibus Communication Connector
  2. Into: GPL-CON

Uma usebenzisa ukuxhumana kwe-Pnet, ikhebula elisontekile elivikelekile lizosetshenziswa ngokucabangela ibanga nesivinini sokuxhumana.

  1. Umkhiqizi: I-Belden noma umenzi wemininingwane efanayo engezansi
  2. Ukucaciswa kwekhebula
Ukwahlukanisa Incazelo
AWG 22 I-XGT-XGL-PMEB-Programmable-Logic-Controller-FIG-1
Uhlobo I-BC (Ithusi Elingenalutho)
I-Insulation I-PE (i-Polyethylene)
Ububanzi(intshi) 0.035
Isihlangu I-aluminium Foil-Polyester,

I-Tape/Braid Shield
Amandla (pF/ft) 8.5
I-impedance yesici(Ω) awu 150Ω

Igama lezingxenye kanye nobukhulu (mm)

  • Lena ingxenye engaphambili yeMojuli. Bheka igama ngalinye uma usebenzisa uhlelo. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.

I-XGT-XGL-PMEB-Programmable-Logic-Controller-FIG-2

Imininingwane ye-LED

Usilika Incazelo
GIJIMA On Qalisa ukusebenza okuphelele nokujwayelekile
Valiwe Iphutha eliyingozi
I/F Ukucwayiza Isimo esijwayelekile esibonakalayo nge-CPU
Valiwe Iphutha esimweni sokusebenzelana ne-CPU
 

HS

 On Isimo sokuxhumana esijwayelekile se-HS
Ukucwayiza Misa isimo sokuxhumana/ukulanda Ipharamitha kusixhumanisi se-HS vumela
Valiwe Isimo sokukhubaza isevisi ye-HS Link
 

I-P2P

 On Isimo sokuxhumana esijwayelekile se-P2P
Ukucwayiza Misa isimo sokuxhumana/ukulanda Ipharamitha ku-P2P ukuze unike amandla
Valiwe I-P2P khubaza isimo
I-P-RUN On Ukuxhumana okuvamile
Valiwe Ukuxhumana kumisiwe
ISIMO On Iphutha lesistimu
Valiwe Ukuxhumana okuvamile
 

IPHUTHA

 On Zonke izigqila ziyaqedwa
Ukucwayiza Ezinye izigqila ziyaqedwa
Valiwe Ukuxhumana okuvamile
 

CFG

 On Akukho ukucushwa kwenethiwekhi kwemojuli ye-Profibus-DP Master
Ukucwayiza Ilanda noma ilayisha imingcele yokumisa kumojula Eyinhloko
Valiwe Ukucushwa kwenethiwekhi kufakwe ngempumelelo

Ifaka Amamojula Okukhipha

Lapha kuchaza indlela yokunamathisela imojuli ngayinye kusisekelo noma ukuyisusa.
Ifaka imojuli

  1. Faka i-projection engaguquki yengxenye engezansi Ye-PLC embotsheni engashintshi yemojuli yesisekelo
  2. Slayida ingxenye engaphezulu yemojuli ukuze uyilungise kusisekelo, bese uyilinganisa esisekelweni ngokusebenzisa isikulufu esigxilile semojuli.
  3. Donsa ingxenye engenhla yemojuli ukuze uhlole ukuthi ifakwe esisekelweni ngokuphelele.

I-XGT-XGL-PMEB-Programmable-Logic-Controller-FIG-3

Ikhipha imojuli

  1. Khulula izikulufu ezigxilile zengxenye engenhla yemojuli ukusuka kusisekelo
  2. Ngokucindezela i-hook, donsa ingxenye engenhla ye-module kusuka ku-axis yengxenye engezansi ye-module
  3. Ngokuphakamisa imojula phezulu, susa i-lever yokulayisha yemojuli emgodini wokulungisa

Izintambo

Isexwayiso sezintambo

  1. Umugqa wokufaka: Umugqa oluhlaza uxhumeke ku-A1, umugqa obomvu uxhumeke ku-B1
  2. Umugqa ophumayo: Umugqa oluhlaza uxhumeke ku-A2, umugqa obomvu uxhumeke ku-B2
  3. Xhuma isihlangu ku-clamp yesixhumi
  4. Uma ufaka isixhumi kutheminali, faka ikhebula ku-A1, B1
  5. Ukuze uthole ulwazi olwengeziwe lwezintambo, bheka imanuwali yomsebenzisi.

I-XGT-XGL-PMEB-Programmable-Logic-Controller-FIG-4

Iwaranti

  • Isikhathi sewaranti yizinyanga ezingama-36 kusukela ngosuku lokukhiqiza.
  • Ukuxilongwa kokuqala kwamaphutha kufanele kwenziwe ngumsebenzisi. Nokho, ngesicelo, i-LS ELECTRIC noma um(abamele) bayo bangenza lo msebenzi ngenkokhelo. Uma imbangela yephutha kutholakala ukuthi kuwumthwalo we-LS ELECTRIC, le sevisi izoba mahhala.

Okukhishiwe kuwaranti

  1. Ukushintshwa kwezingxenye ezisebenzisekayo nezinomkhawulo wokuphila (isb. amalayidi, amafuse, ama-capacitor, amabhethri, ama-LCD, njll.)
  2. Ukwehluleka noma umonakalo odalwe izimo ezingafanele noma ukuphatha ngaphandle kwalezo ezishiwo kumanuwali yomsebenzisi
  3. Ukwehluleka okubangelwa izici zangaphandle ezingahlobene nomkhiqizo
  4. Ukwehluleka okudalwe izinguquko ngaphandle kwemvume ye-LS ELECTRIC
  5. Ukusetshenziswa komkhiqizo ngezindlela ezingahlosiwe
  6. Ukwehluleka okungenakubikezelwa/ukuxazululwa ngobuchwepheshe besayensi bamanje ngesikhathi sokukhiqiza
  7. Ukwehluleka ngenxa yezinto zangaphandle ezifana nomlilo, ivolumu engavamiletage, noma izinhlekelele zemvelo
  8. Amanye amacala lapho i-LS ELECTRIC ingenacala

Ukuze uthole ulwazi oluningiliziwe lwewaranti, sicela ubheke imanuwali yomsebenzisi.
Okuqukethwe komhlahlandlela wokufaka kungashintsha ngaphandle kwesaziso sokuthuthukiswa kokusebenza komkhiqizo.

CONTACT

  • I-LS ELECTRIC Co., Ltd. www.ls-electric.com 10310001626 V1.3 (2024.6)
  • I-imeyili: automation@ls-electric.com
  • Indlunkulu/Seoul Office Ucingo: 82-2-2034-4033,4888,4703
  • Ihhovisi le-LS ELECTRIC Shanghai (China) Ucingo: 86-21-5237-9977
  • I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Ucingo: 86-510-6851-6666
  • I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Ucingo: 84-93-631-4099
  • I-LS ELECTRIC Middle East FZE (Dubai, UAE) Ucingo: 971-4-886-5360
  • I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Ucingo: 31-20-654-1424
  • I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Ucingo: 81-3-6268-8241
  • I-LS ELECTRIC America Inc. (Chicago, USA) Ucingo: 1-800-891-2941
  • Imboni: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea

I-XGT-XGL-PMEB-Programmable-Logic-Controller-FIG-5

Amadokhumenti / Izinsiza

I-XGT XGL-PMEB Isilawuli Sengqondo Ehlelekayo [pdf] Umhlahlandlela wokufaka
XGK-28, XGL-PMEB, XGL-PMEB Programmable Logic Controller, XGL-PMEB, Programmable Logic Controller, Logic Controller, Controller

Izithenjwa

Shiya amazwana

Ikheli lakho le-imeyili ngeke lishicilelwe. Izinkambu ezidingekayo zimakiwe *