USAutomatic Low Current Receiver Installation Guide

USAutomatic Low Current Receiver

Siyabonga ngokukhetha lo mkhiqizo.
Sicela ufunde leli bhukwana ngokucophelela ngaphambi kokufaka lo mkhiqizo.

Isingeniso

• Into ephansi eyamukelayo yamanje ethi 030205 isamukeli esiphumayo esi-2, esisebenza ku-433,92 Mhz ekumojuleni kwe-AM/ASK.
• Iklanyelwe amasistimu okuvala okuzenzakalelayo kanye nezinhlelo zokulwa nokugqekeza ezinomthamo ophansi kakhulu wokuphumula wamanje.
• The operating frequency is among the European harmonised frequencies. The antenna is connected with a F- type connector.
• Okuphumayo kwe-relay kuphela AKUKHO othintana naye noxhumana naye ovamile ofushaniswe ku-Ground.
• Imodi yokusebenza ye-K1 iPulse futhi ye-K2 ingaba yiPulse noma iLatch. Ukunikezwa kwamandla yi-12 Vdc.
• Ibanga le-IP le-2X livumela ukufakwa kwangaphakathi kuphela.
• Umkhiqizo uthobelana ngokugcwele ne-EMC European Regulations (CE) kanye ne-FCC Part 15 Regulations.

Ama-Transmitter Asebenzisekayo

• 2-button transmitter – Part # 030210
• 4-button transmitter – Part # 030212

Ukucaciswa kobuchwepheshe

• Uhlobo lomamukeli: I-Superheterodyne.
• Ukudilizwa: AM/ASK.
• Imvamisa yokusebenza: 433,92 MHz.
• Imvamisa ye-oscillator yendawo: 6,6128 MHz.
• Imvamisa emaphakathi: 10,7 MHz.
• Ukuzwela (ngesiginali enhle): -115 dBm.
• I-impedance yokokufaka: 75 Ohm.
• Ukunikezwa kwevoltage: 12 dc ( ± 10% ).

Ukumuncwa kwamanje:

• ngesikhathi sokuphumula: 1.5 mA
• nge-1 relay ujabulile: 7 mA
• Inombolo yokudlulisa: 2 (1CHA, 1NO ).
• Imodi ye-Relay yokusebenza Pulse / Latch
• Commutable max power: 24W or 24VA.
• Umthamo wememori ( tx keys ): 42.
• Operating temperature: -4 ÷ +158 °F.
• Ubukhulu: 4.13 x 1.77 x 1.1 in
• Isisindo: 2.29 oz
• Ibanga lokuvikela i-IP: 2X

Umamukeli ngaphezuluview

• P1: Inkinobho ye-P1
• P2: Inkinobho ye-P2
• LD: Green Led
• CON: I/O Connector
• I-K1: I-Relay 1 Output
• F: Isixhumi sohlobo lwe-F
• I-K2: I-Relay 2 Output

Umdwebo wezintambo

Izici eziyinhloko

• Ukusetshenziswa kwamanje kokuphumula okuphansi kakhulu
• 42 okhiye be-transmitter abagcinekayo
• Ikhi yesidlulisi esisodwa noma Ukusula inkumbulo egcwele
• Imodi yokusebenza ehlelekayo yokudlulisela oku-2: okwesikhashana, ukuxhuma
• Easy Transmitter izinhlelo

ISITHUMI SOHLANGANO KANYE NE-RECEIVER

• The Transmitter and Receiver operate at 433 MHz. The receiver can store up to 22 unique transmitter codes.

Ukusethwa kwe-Transmitter:
(Kunconywa ukuthi ama-dipswitches ashintshwe kusukela kulungiselelo lokuzenzakalelayo)

1. Vula isicabha sekhompathi yebhethri bese uthola ama-dipswitches.
2. Shintsha ama-dipswitches abe kuzilungiselelo ozithandayo. Rekhoda ukuze uthole ireferensi yesikhathi esizayo.

Inkinobho Yesokunxele Yokudlulisa Kuhlelo Lomamukeli:
(umsebenzi ojwayelekile Vula/Misa/Vala)

1. Press and hold the left transmitter button down. Red light on the transmitter should be on.
2. Kumamukeli, cindezela inkinobho ye-P1 kuze kube yilapho kuvela ukukhanya okuluhlaza kwe-LD.
3. Dedela izinkinobho zombili. Inkinobho yokudlulisela kwesokunxele kuya kuhlelo lomamukeli kuqediwe.

Inkinobho Yesokudla Yokudlulisa Kuhlelo Lomamukeli:
(Bamba-Isango-Vula) (Kuphela uma isibali sikhathi sokuvala ngokuzenzakalela sinikwe amandla)
The 2-channel receiver allows for programming the P2 relay from momentary mode (default) to latching mode. The transmitter right button can then be programmed to hold the gate open, overriding the auto-close feature, if activated.

1. Press and hold the right transmitter button down. Red light on the transmitter should be on.
2. Kumamukeli, cindezela inkinobho ye-P2 kuze kube yilapho kuvela ukukhanya okuluhlaza kwe-LD.
3. Dedela izinkinobho zombili.
4. Inkinobho yokudlulisela kwesokudla kuya kuhlelo lomamukeli kuqediwe.
5. Manje kufanele usethe isamukeli se-P2 ukuze sixhume imodi ngezinyathelo ezingezansi.

Uhlelo Lomamukeli:
Dlulisa uhlelo lwe-P2 ukusuka kwimodi yesikhashana ukuya kwimodi yokuxhuma (ukubamba isango livuliwe)

1. Kumamukeli, cindezela inkinobho ye-P2 kuze kufike ukukhanya okuluhlaza kwe-LD, bese uyakhulula. Isibani se-LD esiluhlaza kufanele singanyakazi.
2. Ngenkathi ukukhanya kwe-LD okuluhlaza kuvuliwe, cindezela inkinobho ye-P1 phansi bese uyakhulula. Isibani se-LD esiluhlaza kufanele sibanise. Imodi ye-latch isethiwe.

Ukuqinisekisa Isamukeli se-P2 edluliselwe kuhlelwe kumodi yokuxhuma:

1. Kumamukeli, cindezela inkinobho ye-P2 kuze kufike ukukhanya okuluhlaza kwe-LD, bese uyakhulula.
2. Isibani se-LD esiluhlaza kufanele sibanise. Uma ukukhanya kwe-LD okuluhlaza kuzinzile, yenza kabusha isigaba Sohlelo Lokuthola Umamukeli ngenhla.

Isetha kabusha isamukeli se-P2 sokudlulisela kumodi yesikhashana:

1. Kumamukeli, cindezela inkinobho ye-P2 kuze kufike ukukhanya okuluhlaza kwe-LD, bese uyakhulula. Isibani se-LD esiluhlaza kufanele sibanise.
2. Ngenkathi ukukhanya kwe-LD okuluhlaza kuvuliwe, cindezela inkinobho ye-P1 phansi bese uyakhulula. Ukukhanya kwe-LD eluhlaza kufanele kuqine. Imodi yesikhashana isethiwe.

Erasing Single Transmitter from Receiver Memory:
Izilungiselelo ze-dipswitch zesithumeli esizosuswa kufanele zaziwe.
Uma waziwa landela lezi zinyathelo ezingezansi.

1. Setha ama-dipswitches kusidlulisi ukuze uhambisane nezilungiselelo zokushintsha zekhodi yesithumeli ukuze uzisuse.
2. Cindezela bese ubamba inkinobho yokudlulisela kwesokunxele.
3. Kumamukeli cindezela inkinobho ye-P1 kuze kube yilapho kuvela ukukhanya okuluhlaza kwe-LD.
   Bese ukhulula kokubili.
4. Cindezela bese ubamba inkinobho yokudlulisela kwesokudla.
5. Kumamukeli cindezela inkinobho ye-P2 kuze kube yilapho kuvela ukukhanya okuluhlaza kwe-LD.
   Bese ukhulula kokubili.
6. I-Transmitter manje isuliwe kumemori yomamukeli.

Erasing all Transmitters from Receiver Memory:

1. Press the P2 button on the receiver until the green LD light comes on. Then release P2 button.
2. Ngenkathi ukukhanya kwe-LD kukhanya cindezela izinkinobho ze-P1 ne-P2 ngesikhathi esisodwa futhi ubambe kuze kube yilapho ukukhanya kwe-LD okuluhlaza kuqala ukucwayiza kancane.
3. Kufanele icwayize izikhathi ezi-4 bese wonke amakhodi e-transmitter ayasulwa.

ISIBONISO SENOMBOLO YESITHUTHI

• Kungenzeka ukubonisa ukuthi bangaki okhiye bokuthumela abagcinwe kumemori.
• Inombolo iboniswa, ku-binary notation ( 0 noma 1 ), ngokulandelana kokuphazima kwe-led.
• Ukubalasha okufushane ( ½ isekhondi ) kwe-LD kunikeza kanambambili “0”.
• Ukukhanya okude (isekhondi elingu-1) kwe-LD kunikeza kanambambili “1”.
• Ukulandelana okuphelele kwakhiwe ukukhanya okuyisi-6 kanye nokukhanya okude kokugcina (imizuzwana emi-2).
• Ngokwendawo yayo, i-flash ngayinye inesisindo "esihlukile".

First flash: 2 = 1

1. Second flash: 2 = 2
2. Third flash: 2 = 4
3. Fourth flash: 2 = 8
4. Fifth flash: 2 = 16
5. Sixth flash: 2 = 32

Inqubo

1. Gcina i-P1 noma i-P2 icindezelwe phansi kuze kuvuleke i-LD.
2. Khipha inkinobho bese ucindezela i-P2 isikhashana ngaphambi kokuthi i-LD icishwe.

Kuleli qophelo kuqala ukulandelana kombani.
Qaphela ukulandelana ukuze ubale inombolo yedesimali ehambisanayo, njengoba kuboniswe ku-ex elandelayoampLes.

Es. N° 1 : Inkumbulo ayinalutho

• Isisindo 1 2 4 8 16 32 Qeda Ukulandelana
• Ukulandelana : _ _ _ _ _ ________
• Final number : 0 + 0 + 0 + 0 + 0 + 0 = 0

Es. N° 2 : 5 okhiye be-transmitter

• Isisindo 1 2 4 8 16 32 Qeda Ukulandelana
• Ukulandelana : _____ _ _____ _ _ ________
• Inombolo yokugcina : 1+ 0 + 4 + 0 + 0 + 0 = 5

Es. N° 3 : 12 okhiye be-transmitter

• Isisindo 1 2 4 8 16 32 Qeda Ukulandelana
• Ukulandelana : _ _ __ __ _ _ ________
• Inombolo yokugcina : 0 + 0 + 4 + 8 + 0 + 0 =12

IWARANTI

• USAutomatic, LLC warrants this product to be free of defects in materials and workmanship for 1 YEAR. For a period of 1 YEAR following purchase, USAutomatic, LLC. will repair or replace the product free of charge, including parts, shop labor and return to customer shipping and handling.
• This 1-year warranty does not cover the plastic case from normal wear or damage due to misuse.
• To have the product sent for warranty consideration, it must be returned with the proof of purchase and a return authorization number. To obtain a return authorization number, please call 1-888-204-0174 for assistance. The return authorization number must be clearly marked on the outside of the return package or it may not be accepted.

CONTACT

• www.usautomaticgateopeners.com
• (888)-378-1170
• sales@usautomaticgateopeners.com