I-UNITY FAST Micro Mount Instruction Manual

Okuqukethwe fihla

QINISEKISA UKUTHI ISIBHAMU SIKHISHIWE
ISEXWAYISO: Izinsimbi ezicindezela kakhulu zingalimaza isikhwebu sakho futhi ngeke zimbozwe iwaranti.

Uma usebenzisa i-Front BUIS, hlela endaweni uye phansi kwe-FAST Mount ukuze ithiphu lokuthunyelwe ngokuvamile liqondaniswe ne-Rear BUIS. UNGAYISEBENZISI I-THREAD LOCKER.
Susa ukukhweza kwamanje ku-optic futhi ukubeke eceleni.
Usebenzisa izikulufu zokukhweza ezinikeziwe, faka i-optic ukuze uyikhweze. Qinisa izikulufu ngephethini ethi “X” zize ziqine umunwe. Bese unikeza isikulufu ngasinye ukujika okungu-1/8 – 1/4 ngesikrufu esihlinzekiwe. UNGADLULI I-TOQUE SPEC ENCONYWA NGABAKHISHI.

Uma usebenzisa i-Standard Rail Grabber Mount clamp, faka ukukhweza esikhalini. Vikela izikulufu usebenzisa i-T25 bit driver. Gcoba kancane zonke izikulufu ngaphambi kokufaka itorque yokugcina kunoma yisiphi. TOQUE TO 35 IN-LBS.
I-ADM Quick Detach Lever engakhethwa (ithengiswa ngokwehlukana) ingafakwa esikhundleni se-grabber kaloliwe. Imiyalo yokufaka ifakiwe ne-lever.
I-ADM QD Lever Kit ehambisanayo enamantongomane okuphathelene (bona isithombe esiyinkomba) etholakala ngokukhethekile kwa-Unity Tactical kanye nabathengisi bayo.
UKUSEBENZISA I-ADM NUT EZIJWAYELEKILE KUNGALIMAZA INTABA YAKHO FUTHI NGENZE IWARANTI.

Ukulungiswa kwamawindi e-Rear BUIS ngu-0.5 MOA/ukuchofoza (ene-Sight Radius engu-12.5”). Uma kuhlangene ne-Front BUIS efakiwe, ukulungiswa kungu-5 MOA/ngokuchofoza. Ukulungiswa kwe-windage kungenziwa ngamathuluzi okulungisa i-Aimpoint noma i-screwdriver ye-flat blade.
Ukulungiswa kokuphakama kwe-Front BUIS kungu-10 MOA ngo-1/8” ukujika (khumbula ukuthi lena yi-1.27” Sight Radius. Ngakho-ke, yebo: Ukuphakama kuzothinta kakhulu. Lo mbono uhloselwe njengesistimu yokusekela izikhali ezisebenzayo. awunayo imfuneko ejwayelekile yokubona ngaphambili.