I-UNITRONICS V130-33-TR34 Izilawuli Zengqondo Eziqinile Ezihlelekayo

I-Vision™PLC+HMI

• V130-33-TR34/V130-J-TR34
• V350-35-TR34/V350-J-TR34
• I-V430-J-TR34
• V130-33-R34/V130-J-R34
• V350-35-R34/V350-J-R34
• I-V430-J-R34

Umhlahlandlela Womsebenzisi

• 22 Okokufaka Kwedijithali, okuhlanganisa 3 HSC/Shaft-encoder-encoder, 2 okokufaka kwe-Analog
• 8 Ukudluliselwa Kwemiphumela
• 4 High-speed npn Transistor Outputs
• Okokufaka Kwedijithali okungu-22, okuhlanganisa okokufaka kwe-HSC/Shaft-encoder oku-3, Okokufaka kwe-Analog okungu-2
• 12 Ukudluliselwa Kwemiphumela

Incazelo evamile

Imikhiqizo ebhalwe ngenhla ngama-micro-PLC+HMIs, izilawuli ezinengqondo ezihlelekayo ezihlanganisa amaphaneli asebenzayo akhelwe ngaphakathi.
Imihlahlandlela Yokufaka enemininingwane equkethe imidwebo yezintambo ye-I/O yalawa mamodeli, ukucaciswa kobuchwepheshe, kanye nemibhalo eyengeziwe kutholakala Kulabhulali Yezobuchwepheshe ku-Unitronics. webindawo:
https://unitronicsplc.com/support-technical-library/

Into	I-V130-TR34 V130J-TR34	I-V130-R34 V130J-R34	I-V350-TR34 V350J-TR34	I-V350-R34 V350J-R34	I-V430J-TR34 V430J-R34
Ebhodini I/O	Imodeli Encike
Isikrini	2.4″		3.5″ Ukuthinta Kombala		4.3″ Ukuthinta Kombala
Ikhiphedi	Yebo		Lutho
Okhiye Bomsebenzi	Lutho		Yebo
I-Com Port, eyakhelwe ngaphakathi
RS232/485	Yebo	Yebo	Yebo*	Yebo*	Yebo*
Idivayisi ye-USB, i-mini-B	Lutho	Lutho	Yebo*
Amachweba we-Com, ukuhleleka okuhlukile, kufakwe umsebenzisi	Umsebenzisi angase afake imbobo ye-CANbus (V100-17-CAN), futhi eyodwa kokulandelayo: RS232/RS485 port (V100-17-RS4/V100-17-RS4X) I-Ethernet (V100-17-ET2) I-Profibus Slave (V100-17-PB1)
* I-V430J/V350/V350J ihlanganisa zombili izimbobo ze-RS232/485 kanye ne-USB; qaphela lokho kuphela eyodwa isiteshi singasetshenziswa ngesikhathi.

Okuqukethwe Kwekhithi Ejwayelekile 

Into	I-V130-TR34 V130J-TR34	I-V130-R34 V130J-R34	I-V350-TR34 V350J-TR34	I-V350-R34 V350J-R34	I-V430J-TR34 V430J-R34
Isilawuli	Yebo
Amabhulokhi wetheminali	Yebo
Ibhethri (ifakiwe)	Yebo
Abakaki Okufakwayo	Yebo (2 izingxenye)				Yebo (4 izingxenye)
I-Rubber Seal	Yebo

Izimpawu Zesexwayiso kanye Nemikhawulo Ejwayelekile

Uma kuvela noma yiziphi izimpawu ezilandelayo, funda ulwazi oluhlobene nalo ngokucophelela.

Uphawu/ Incazelo /Incazelo

• Ingozi Ingozi ehlonziwe idala ukulimala ngokomzimba kanye nempahla.
• Isexwayiso Ingozi ekhonjiwe ingadala umonakalo emzimbeni kanye nempahla.
• Isexwayiso Sebenzisa ukuqapha.
• Ngaphambi kokusebenzisa lo mkhiqizo, umsebenzisi kufanele afunde futhi aqonde lo mbhalo.
• Konke exampi-les nemidwebo kuhloswe ngayo ukusiza ukuqonda, futhi akuqinisekisi ukusebenza. I-Unitrans's ayiwamukeli umthwalo wemfanelo ngokusetshenziswa kwangempela kwalo mkhiqizo ngokusekelwe kulawa ma-exampLes.
• Sicela ulahle lo mkhiqizo ngokuya ngamazinga nemithetho kazwelonke yendawo nekazwelonke.
• Izisebenzi zesevisi eziqeqeshiwe kuphela okufanele zivule lolu cingo noma zilungise.
• Ukwehluleka ukuthobela izinkombandlela zokuphepha ezifanele kungabangela ukulimala okukhulu noma ukulimala kwempahla.
• Ungazami ukusebenzisa le divayisi ngemingcele eyeqa amazinga avunyelwe.
• Ukuze ugweme ukulimaza isistimu, ungaxhumeki/unqamule idivayisi uma amandla avuliwe.

Ukucatshangelwa Kwemvelo

• Ungafaki ezindaweni: ezinothuli oluningi noma olukhiqizayo, igesi ebolayo noma evuthayo, umswakama noma imvula, ukushisa okudlulele, ukushaqeka okujwayelekile noma ukudlidliza okukhulu, ngokuvumelana nezindinganiso ezinikezwe eshidini lemininingwane yobuchwepheshe yomkhiqizo.
• Ungawabeki emanzini noma uvumele amanzi avuzele eyunithi.
• Ungavumeli imfucumfucu iwele ngaphakathi kweyunithi phakathi nokufakwa.
• Ukungenisa umoya: 10mm isikhala esidingekayo phakathi konqenqema lwesilawuli phezulu/phansi nezindonga ezivalekile.
• Faka ebangeni eliphezulu ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.

Ukukhweza

Qaphela ukuthi izibalo ezezinjongo zemifanekiso kuphela.

Ubukhulu: V130/V350/V130J/V350J

* Qaphela ukuthi kumamodeli angu-V130/V350, ububanzi be-bezel bufika ku-8.4 mm (0.33”).

Ubukhulu: I-V430J

Imodeli	Sika-ngaphandle	View indawo
I-V130V130J	92×92 mm (3.622”x3.622”)	58×30.5mm (2.28″x1.2″)
I-V350/V350J	92×92 mm (3.622”x3.622”)	72×54.5mm (2.95″x2.14″)
I-V430J	122.5×91.5 mm (4.82”x3.6”)	96.4×55.2mm (3.79″x2.17″)

I-Panel Mounting
Ngaphambi kokuba uqale, qaphela ukuthi iphaneli yokufaka ayikwazi ukuba ngaphezu kuka-5 mm ubukhulu.

1. Sika iphaneli ngosayizi ofanele:
2. Shelelezisa isilawuli endaweni esikiwe, uqinisekise ukuthi uphawu lwerabha lusendaweni.
3. Phusha abakaki abakhwezayo ezindaweni zabo ezisemaceleni ephaneli njengoba kukhonjisiwe esithombeni esingezansi.
4. Qinisa izikulufu zabakaki ngokumelene nephaneli. Bamba ubakaki ngokuphepha ngokumelene neyunithi ngenkathi uqinisa isikulufu.
5. Uma sifakwe kahle, isilawuli simi ngokulingana kusikwe kwephaneli njengoba kubonisiwe ezibalweni ezihambisana nalesi sihloko.

V130/V350/V130J/V350J 

I-V430J 

I-DIN-rail Mounting (V130/V350/V130J/V350J) 

1. Thinta isilawuli kumzila we-DIN njengoba kuboniswe emfanekisweni ongakwesokudla.
2. Uma ikhwezwe kahle, isilawuli simi ngokulingana ku-DIN-rail njengoba kukhonjisiwe emfanekisweni ongakwesokudla.

Ukuhambisana kwe-UL

Isigaba esilandelayo sihambisana nemikhiqizo ye-Unironic esohlwini lwe-UL.
Amamodeli alandelayo: V130-33-R34, V130-J-R34, V130-T4-ZK1, V350-35-RA22, V350-J-RA22, V350-35-R34, V350-J-R34, V430-J- R34
afakwe ohlwini lwe-UL Lwezindawo Eziyingozi.
The following models: V130-33-B1,V130-J-B1,V130-33-TA24,V130-J-TA24,V130-33-T38,V130-J-T38 V130-33-TR20,V130-J-TR20,V130-33-TR34,V130-J-TR34,V130-33-RA22,V130-J-RA22, V130-33-TRA22,V130-J-TRA22,V130-33-T2,V130-J-T2,V130-33-TR6,V130-J-TR6,V130-33-R34, V350-35-B1, V130-T4-ZK1, V350-J-B1,V350-35-TA24,V350-J-TA24,V350-35-T38,V350-J-T38, V350-35-TR20,V350-J-TR20,V350-35-TR34,V350-J-TR34,V350-35-TRA22,V350-J-TRA22, V350-35-T2,V350-J-T2,V350-35-TR6,V350-J-TR6,V350-S-TA24,V350-JS-TA24,V350-35-RA22, V350-J-RA22,V350-35-R34, V430-J-B1,V430-J-TA24,V430-J-T38, V430-J-R34,V430-J-RH2, V430-J-TR34,V430-J-RA22,V430-J-TRA22,V430-J-T2,V430-J-RH6 are UL listed for Ordinary Location.

Okwamamodeli asuka ochungechungeni lwe-V130, V130-J, V430, afaka i-“T4” noma “J4” egameni leModel, Afanele ukukhwezwa endaweni eyisicaba yendawo ebiyelwe yohlobo 4X.
Okwesiboneloamples: V130-T4-R34, V130-J4-R34, V430-J4-T2

Indawo ye-UL Ejwayelekile
Ukuze uhlangabezane nezinga lendawo evamile ye-UL, khweza le divayisi ngephaneli endaweni eyisicaba yohlobo 1 noma 4 X oluvalekile.

Izilinganiso ze-UL, Izilawuli Ezihlelekayo Zokusetshenziswa Ezindaweni Eziyingozi,
Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D
Lawa manothi okukhishwa ahlobene nayo yonke imikhiqizo ye-Unironic enezimpawu ze-UL ezisetshenziselwa ukumaka imikhiqizo egunyazwe ukusetshenziswa ezindaweni eziyingozi, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D.

Isexwayiso 

• Lo mshini ulungele ukusetshenziswa Ekilasini I, Isigaba 2, Amaqembu A, B, C kanye no-D, noma ezindaweni ezingezona eziyingozi kuphela.
• Izintambo zokufaka nokuphumayo kufanele zihambisane nezindlela zokufaka izintambo zeSigaba I, isigaba 2 futhi ngokuhambisana negunya elinegunya.
• ISEXWAYISO—Ukuqhuma Ingozi—ukushintsha izingxenye kungakhinyabeza ukufaneleka Kwekilasi I, Isigaba 2.
• ISEXWAYISO – INGOZI YOKUQHUBEKA – Ungaxhumi noma unqamule amathuluzi ngaphandle uma ugesi ucishiwe noma indawo yaziwa ngokuthi ayinabungozi.
• ISEXWAYISO – Ukuchayeka kwamanye amakhemikhali kungase kwehlise izinga lokuvala impahla esetshenziswa kuma-Relay.
• Lo mshini kufanele ufakwe kusetshenziswa izindlela zokufaka izintambo njengoba kudingeka ku-Class I, Division 2 ngokwe-NEC kanye/noma i-CEC.

Iphaneli-Ukukhweza
Kuzilawuli ezihlelekayo ezingafakwa nakuphaneli, ukuze kuhlangatshezwane nezinga le-UL Haz Loc, faka iphaneli ledivayisi endaweni eyisicaba yohlobo loku-1 noma izivalo zohlobo lwe-4X.

Izilinganiso Zokumelana Nokukhipha Okudluliselweyo
Imikhiqizo ebhalwe ngezansi iqukethe okuphumayo kwe-relay:
Izilawuli ezihlelekayo, Amamodeli: V430-J-R34, V130-33-R34, V130-J-R34 kanye ne-V350-35-R34, V350-J-R34

• Uma le mikhiqizo ethile isetshenziswa ezindaweni eziyingozi, ilinganiselwa ku-3A res.
• Ngaphandle kwamamodeli V430-J-R34, V130-33-R34, V130-J-R34, V130-T4-ZK1 kanye V350-35-R34, V350-J-R34, lapho le mikhiqizo ethize isetshenziswa endaweni engeyona ingozi. izimo, zilinganiselwa ku-5A res, njengoba zinikezwe ezicacisweni zomkhiqizo.

Ukuxhumana kanye Nesitoreji Senkumbulo Esikhiphekayo

Uma imikhiqizo ihlanganisa imbobo yokuxhumana ye-USB, imbobo yekhadi le-SD, noma kokubili, indawo yekhadi le-SD noma imbobo ye-USB ayihloselwe ukuthi ixhumeke unomphela, kuyilapho imbobo ye-USB ihloselwe ukuhlela kuphela.

Ukukhipha / Ukushintsha ibhethri
Uma umkhiqizo ufakwe nebhethri, ungalikhiphi noma ushintshe ibhethri ngaphandle uma ugesi ucishiwe, noma indawo yaziwa ngokuthi ayinabungozi.
Sicela uqaphele ukuthi kuyanconywa ukwenza ikhophi yasenqolobaneni yonke idatha egcinwe ku-RAM, ukuze ugweme ukulahlekelwa idatha lapho ushintsha ibhethri kuyilapho amandla evaliwe. Ulwazi lwedethi nesikhathi nalo luzodinga ukusethwa kabusha ngemva kwenqubo.

Izintambo

• Ungazithinti izintambo ezibukhoma.
• Faka i-circuit breaker yangaphandle. Kuqaphe i-short-circuiting kuzintambo zangaphandle.
• Sebenzisa izisetshenziswa ezifanele zokuvikela isekethe.
• Izikhonkwane ezingasetshenzisiwe akufanele zixhunywe. Ukuziba lesi siqondiso kungase kulimaze idivayisi.
• Hlola kabili zonke izintambo ngaphambi kokuvula ugesi.
• Ukuze ugweme ukulimaza ucingo, ungadluli i-torque engu-0.5 N·m (5 kgf·cm).
• Ungasebenzisi ithini, i-solder, nanoma iyiphi into ocingweni olukhumuliwe olungase lunqamuke umucu wocingo.
• Faka ebangeni eliphezulu ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.

Inqubo yokufaka izintambo
Sebenzisa amatheminali e-crimp ukuze Sebenzisa amatheminali e-crimp ukuze uthole izintambo;

• Izilawuli ezinikeza ibhulokhi yetheminali enephimbo elingu-5mm: intambo engu-26-12 AWG (0.13 mm2 –3.31 mm2).
• Izilawuli ezinikeza ibhulokhi yetheminali enephimbo elingu-3.81mm: intambo engu-26-16 AWG (0.13 mm2 – 1.31 mm2).

1. Hlikihla ucingo lube ubude obungu-7±0.5mm (0.270–0.300“).
2. Khipha itheminali endaweni yayo ebanzi kakhulu ngaphambi kokufaka intambo.
3. Faka intambo ngokuphelele kutheminali ukuze uqinisekise uxhumano olufanele.
4. Qinisa ngokwanele ukugcina intambo ingadonsi mahhala.

• Amakhebuli okokufaka noma okukhiphayo akufanele asetshenziswe ngentambo efanayo yama-multi-core noma abelane ngentambo efanayo.
• Vumela ivolumutagUkuphazamiseka kwe-e nomsindo nemigqa ye-I/O esetshenziswa ebangeni elinwetshiwe. Sebenzisa intambo enosayizi ofanele wokulayisha.
• Isilawuli kanye namasiginali we-I/O kufanele axhunywe kusignali efanayo ye-0V.

Mina / Os

Amamodeli e-V130/V350/V130J/V350J/V430J-TR34 ahlanganisa ingqikithi yokokufaka okungu-22 nokudluliselwa okungu-8, okuphumayo okungu-4 kwe-npn.
Amamodeli e-V130/V350/V130J/V350J/V430J-R34 ahlanganisa ingqikithi yokokufaka okungu-22 kanye nokuphumayo kwe-relay engu-12.

Ukusebenza kokokufaka kungashintshwa ngendlela elandelayo:
22 okokufaka kungase kusetshenziswe njengokufakwayo kwedijithali.
Angase anezintambo, eqenjini, futhi asethelwe ku-npn noma i-pnp nge-jumper eyodwa.
Ngaphezu kwalokho, ngokuya ngezilungiselelo ze-jumper kanye nezintambo ezifanele:

• Okokufaka 14 no-15 kungasebenza njengokungenayo kwedijithali noma kwe-analog.
• Okokufaka 0, 2, kanye no-4 kungasebenza njengezibali zesivinini esikhulu, njengengxenye yesishumeki se-shaft, noma okokufaka kwedijithali okuvamile.
• Okokufaka 1, 3, no-5 kungasebenza njengokusethwa kabusha kwekhawunta, njengengxenye yesishumeki se-shaft, noma okokufaka kwedijithali okuvamile.
• Uma okokufaka u-0, 2 kanye no-4 kusethwe njengezibali zesivinini esikhulu (ngaphandle kokusetha kabusha), okokufaka 1, 3 kanye no-5 kungasebenza njengokufakwayo kwedijithali okujwayelekile.

Faka izilungiselelo ze-Jumper

Amathebula angezansi abonisa indlela yokusetha i-jumper ethile ukuze ushintshe ukusebenza kokufaka. Ukuze ufinyelele kuma-jumper e-I/O, kufanele uvule isilawuli ngokuya ngemiyalelo eqalayo .

• Izilungiselelo ze-jumper ezingahambelani nokuxhumeka kwezintambo kungalimaza kakhulu isilawuli.

*Izilungiselelo ezizenzakalelayo

I/O Wiring 

• Izihlangu kufanele zixhunywe emthonjeni wesiginali.
• Isignali engu-0V yokokufaka kwe-analogi kufanele ixhunywe ku-0V yesilawuli.

Ukwandisa Isikhathi Sokuphila Sokuxhumana
Ukuze ukhuphule ubude besikhathi sempilo yabathintana nabo abaphumayo futhi uvikele idivayisi emonakalweni ongase ube khona nge-EMF ehlehlayo, xhuma:

• I-clamping diode ngokuhambisana nomthwalo ngamunye we-DC ongenisayo
• Isekhethi ye-RC snubber ngokuhambisana nomthwalo ngamunye we-AC ongenisayo

Ukunikezwa kwamandla kagesi

Isilawuli sidinga ukunikezwa kwamandla kwangaphandle kwe-24VDC.

• Ukunikezwa kwamandla kumele kufake ukufakwa kabili. Okukhiphayo kufanele kukalwe njenge-SELV/PELV/Class2/Limited Power.
• Sebenzisa izintambo ezihlukene ukuze uxhume ulayini womhlaba osebenzayo (iphinikhodi 3) kanye nolayini ongu-0V (uphini 2) ohlelweni lomhlabathi.
• Faka i-circuit breaker yangaphandle. Kuqaphe i-short-circuiting kuzintambo zangaphandle.
• Hlola kabili zonke izintambo ngaphambi kokuvula ugesi.
• Ungaxhumi isignali ethi 'Neutral' noma 'Layini' ye-110/220VAC kuphinikhodi ye-0V yedivayisi
• Uma kwenzeka voltage ukuguquguquka noma ukungavumelani nevolumutage ukucaciswa kokunikezwa kwamandla, xhuma idivayisi ekunikezeni amandla okulawulwayo.

Ukunciphisa i-PLC+HMI
Ukuze ukhulise ukusebenza kwesistimu, gwema ukuphazamiseka kwe-electromagnetic ngokwenza lokhu:

• Ukukhweza isilawuli kuphaneli yensimbi.
• Xhuma uxhumano ngalunye oluvamile noluphansi ngokuqondile emhlabathini wohlelo lwakho.
• Ukuze izintambo zomhlabathi zisebenzisa intambo emfushane futhi ewugqinsi kakhulu.

Ukuxhumana

• I-V130/ V130J
  Lawa mamodeli ahlanganisa i-serial port RS232/RS485 eyakhelwe ngaphakathi (Port 1)
• V430J/V350/V350J
  Lawa mamodeli ahlanganisa izimbobo ezakhelwe ngaphakathi: 1 USB kanye ne-1 RS232/RS485 (Port 1).

Qaphela ukuthi ukuxhuma ngokoqobo i-PC kusilawuli nge-USB kumisa ukuxhumana kwe-RS232/RS485 nge-Port 1. Uma i-PC inqanyuliwe, i-RS232/RS485 iqala kabusha.

Imbobo ye-RS232/RS485 

• Vala amandla ngaphambi kokwenza uxhumano lwezokuxhumana.

Isexwayiso

• Njalo sebenzisa ama-adaptha embobo afanelekile.

Isexwayiso

• Amasignali ahlobene ne-0V yesilawuli; i-0V efanayo isetshenziswa ukunikezwa kwamandla.
• Imbobo ye-serial ayihlukanisiwe. Uma isilawuli sisetshenziswa nedivayisi yangaphandle engahlukanisiwe, gwema amandla angaba namandlatage edlula ± 10V.
• Sebenzisa i-RS232 ukuze udawunilode izinhlelo ku-PC, kanye nokuxhumana namadivayisi we-serial nezinhlelo zokusebenza, njenge-SCADA.
• Sebenzisa i-RS485 ukuze udale inethiwekhi yokudedela okuningi equkethe amadivayisi angafika kwangu-32.

Ama-pinouts
Amaphinikhodi angezansi akhombisa amasiginali wembobo ye-PLC.

RS232
Phina #	Incazelo
1*	Isignali ye-DTR
2	0V inkomba
3	Isignali ye-TXD
4	Isignali ye-RXD
5	0V inkomba
6*	Isignali ye-DSR

RS485**		Isilawuli Port
Phina #	Incazelo
1	Isignali (+)
2	(Isiginali ye-RS232)
3	(Isiginali ye-RS232)
4	(Isiginali ye-RS232)
5	(Isiginali ye-RS232)
6	Isignali B (-)

* Izintambo ezijwayelekile zokuhlela azinikezi izindawo zokuxhuma zamaphinikhodi 1 no-6.
** Uma imbobo iguqulelwe ku-RS485, i-Pin 1 (DTR) isetshenziselwa isignali A, kanti isignali ye-Pin 6 (DSR) isetshenziselwa isignali B.

Qaphela ukuthi kungenzeka ukusungula uxhumano lwe-PC kuya ku-PLC usebenzisa i-RS232 ngisho nalapho i-PLC isethelwe ku-RS485 (lokhu kuqeda isidingo sokuvula isilawuli ukuze usethe ama-jumpers).
Ukuze wenze njalo, khipha isixhumi se-RS485 (amaphini 1 & 6) ku-PLC bese uxhuma ikhebuli yokuhlela ye-RS232 evamile.
Qaphela ukuthi lokhu kungenzeka kuphela uma amasiginali we-DTR ne-DSR we-RS232 engasetshenziswa (okuyicala elijwayelekile).

Ukusetha amapharamitha wokuxhumana we-RS232/RS485, V130/V350/V130J/V350J
Lesi sikhumulo singase sisethelwe ku-RS232 noma RS485 nge-jumper.

Isibalo esihambisanayo sibonisa izilungiselelo ezizenzakalelayo zefekthri ye-jumper.

Lawa ma-jumpers angasetshenziselwa:

• Setha ukuxhumana kube ngu-RS485, ngokusetha kokubili izixhumi ze-COMM zibe '485'.
• Setha ukunqanyulwa kwe-RS485, ngokusetha zombili izijumba ze-TERM zibe 'OFF'.

Ukuze ufinyelele kuma-jumpers, kufanele uvule isilawuli ngokwemiyalelo esekhasini le-12.

Ukusetha i-RS232/RS485 Communication Parameters, V430J
Lesi sikhumulo singase sisethelwe ku-RS232 noma RS485 ngokushintsha kwe-DIP:
Ithebula libonisa i-DIP ishintsha izilungiselelo ezizenzakalelayo zasembonini. Sebenzisa ithebula ukulungisa izilungiselelo.

	Shintsha izilungiselelo
	1	2	3	4	5	6
RS232*	ON	VALIWE	VALIWE	ON	VALIWE	VALIWE
RS485	VALIWE	ON	ON	VALIWE	VALIWE	VALIWE
I-RS485 ngokunqanyulwa**	VALIWE	ON	ON	VALIWE	ON	ON

* Ukulungiselelwa kwefekthri okuzenzakalelayo
** Ibangela iyunithi ukuthi isebenze njengeyunithi yokugcina kunethiwekhi ye-RS485

Imbobo ye-USB

Isexwayiso

• Imbobo ye-USB ayihlukanisiwe.
  Qiniseka ukuthi i-PC nesilawuli zisekelwe kumandla afanayo.

Imbobo ye-USB ingase isetshenziselwe ukuhlela, ukulanda kwe-OS, nokufinyelela i-PC.

Ivula Isilawuli

Qaphela ukuthi isithombe se-V130 ngesezinjongo zokubonisa kuphela.

• Ngaphambi kokwenza lezi zenzo, thinta into esekelwe phansi ukuze ukhiphe noma iyiphi inkokhiso ye-electrostatic.
• Gwema ukuthinta ibhodi le-PCB ngokuqondile. Bamba ibhodi le-PCB ngezixhumi zalo.

1. Vala ukunikezwa kwamandla, nqamula, futhi ukhiphe isilawuli.
2. Ikhava yangemuva yesilawuli inezikulufu ezingu-4, ezitholakala emakhoneni. Susa izikulufu, bese ukhipha ikhava yangemuva.

Ukushintsha izilungiselelo ze-I/O

Ngemva kokuvula isilawuli nokuveza ibhodi le-I/O, ungashintsha izilungiselelo ze-jumper ngokwethebula eliboniswe ngenhla.

Ukushintsha Izilungiselelo Zokuxhumana (V130/V350/V130J/V350J Kuphela)

1. Ukuze ufinyelele ama-jumpers okuxhumana, bamba ibhodi le-I/O PCB ngezixhumi zalo eziphezulu nezingezansi bese udonsa ibhodi kancane kancane.
2. Thola ama-jumper, bese ushintsha izilungiselelo njengoba kudingeka, ngokuya ngezilungiselelo ze-jumpers ezibonisiwe.

Ukuvala Isilawuli

1. Faka esikhundleni ibhodi ngobumnene.
   Qiniseka ukuthi izikhonkwane zingena kahle esitsheni sazo esifanayo.
   Ungaphoqeleli ibhodi endaweni; ukwenza njalo kungalimaza isilawuli.
2. Shintshanisa ikhava yangemuva yesilawuli bese ubophela izikulufu zekhona.

I-Vision™PLC+HMI
V130-33-TR34/V130-J-TR34
V350-35-TR34/V350-J-TR34
I-V430-J-TR34

Imininingwane Yezobuchwepheshe

Oda Ulwazi

Into

• I-V130-33-TR34
  I-PLC ene-Classic panel, i-Monochrome display 2.4″
• I-V130-J-TR34
  I-PLC ene-Flat panel, i-Monochrome display 2.4″
• I-V350-35-TR34
  I-PLC enephaneli ye-Classic, i-Color touch display 3.5''
• I-V350-J-TR34
  I-PLC ene-Flat panel, i-Colour touch display 3.5''
• I-V430-J-TR34
  I-PLC ene-Flat panel, i-Colour touch display 4.3''

Ukunikezwa kwamandla kagesi

• Into
  • I-V130-TR34
  • I-V130J-TR34
  • I-V350-TR34
  • I-V350J-TR34
  • I-V430J-TR34
• Okokufaka ivoltageya 24VDC
• Ibanga elivumelekile 20.4VDC ukuya ku-28.8VDC elinokunyakaza okungaphansi kuka-10%

Ubukhulu. ukusetshenziswa kwamanje Bheka Inothi 1

• okokufaka kwe-npn
  • 245mA@24VDC
  • 265mA@24VDC
  • 265mA@24VDC
• pnp okokufaka
  • 170mA@24VDC
  • 180mA@24VDC
  • 180mA@24VDC

Amanothi: 

Ukuze ubale ukusetshenziswa kwamandla kwangempela, susa owamanje wento ngayinye engasetshenziswanga enanini eliphezulu elisetshenziswayo lamanje ngokwamanani angezansi:

V130/J V350/J/V430J 

Ukukhanya kwangemuva	I-Ethernet ikhadi	I-Relay Outputs (okukhipha ngakunye)
10mA	35mA	5mA
20mA	35mA	5mA

Okokufaka Kwedijithali
Inombolo yokokufaka	22. Bheka inothi 2
Uhlobo lokokufaka	Bheka inothi 2
Ukuhlukaniswa kwe-galvanic	Lutho
Okokufaka okuzenzakalelayo voltage	24VDC
Okokufaka Voltage
pnp (umthombo)	0-5 VDC ye-Logic '0' 17-28.8 VDC ye-Logic '1'
npn (usinki)	17-28.8 VDC ye-Logic '0' 0-5 VDC ye-Logic '1'
Okokufaka kwamanje	3.7mA@24VDC
I-impedance yokokufaka	6.5KΩ
Isikhathi sokuphendula	10ms ejwayelekile, uma isetshenziswa njengokufakwayo kwedijithali okuvamile
Ubude bekhebula lokokufaka
Okokufaka kwedijithali okujwayelekile	Kufika kumamitha angu-100
Okokufaka Okusheshayo	Kufika kumamitha angama-50, avikelekile, bheka ithebula le-Frequency ngezansi

Okokufaka Kwedijithali

• Umjikelezo womsebenzi 40-60%
• Ukulungiswa kwe-32-bit

Amanothi:

2. Lo modeli uhlanganisa ingqikithi yama-input angama-22. Ukusebenza kokokufaka kungashintshwa ngendlela elandelayo: 22 okokufaka kungase kusetshenziswe njengokufakwayo kwedijithali. Angase anezintambo, eqenjini, futhi asethelwe ku-npn noma i-pnp nge-jumper eyodwa. Ngaphezu kwalokho, ngokuya ngezilungiselelo ze-jumper kanye nezintambo ezifanele: - Okokufaka 14 kanye no-15 kungasebenza njengedijithali noma okokufaka kwe-analog. – Okokufaka 0, 2, no-4 kungasebenza njengezibali ezinesivinini esikhulu, njengengxenye yesishumeki se-shaft, noma okokufaka kwedijithali okujwayelekile. – Okokufaka 1, 3, no-5 kungasebenza njengokusethwa kabusha kwekhawunta, njengengxenye yesishumeki se-shaft, noma okokufaka kwedijithali okuvamile. – Uma okokufaka u-0, 2 no-4 kusethwe njengezibali zesivinini esikhulu (ngaphandle kokusetha kabusha), okokufaka 1, 3 kanye no-5 kungasebenza njengama-inputs edijithali evamile. 3. pnp/npn imvamisa ephezulu iku-24VDC.

Okokufaka kwe-Analog
Inombolo yokokufaka	2, ngokuya ngezintambo njengoba kuchazwe ngenhla kuNothi 2
Uhlobo lokokufaka	Okokufaka kwebanga eliningi: 0-10V, 0-20mA, 4-20mA
Ibanga lokokufaka	0-20mA, 4-20mA	0-10VDC
I-impedance yokokufaka	awu 243Ω	>150KΩ
Isilinganiso esiphezulu sokufaka	25mA, 6V	15V
Ukuhlukaniswa kwe-galvanic	Lutho
Indlela yokuguqula	Ukulinganisa okulandelanayo
Ukulungiswa (ngaphandle kwe-4-20mA)	10-bit (1024 amayunithi)
Ukulungiswa (ku-4-20mA)	204 kuya ku-1023 (820 amayunithi)
Isikhathi sokuguqulwa	Okokufaka okukodwa okulungisiwe kubuyekezwa ngokuskena ngakunye. Bheka Inothi 4
Ukunemba	0.9%
Inkomba yesimo	Yebo - uma okokufaka kwe-analog kuchezuka ngaphezu kobubanzi obuvunyelwe, inani lakhona lizoba ngu-1024.
Amanothi:
4. Okwesikhashanaample, uma okokufaka okungu-2 kulungiselelwa njenge-analog, kuthatha izikena ezi-2 ukuze kuthuthukiswe wonke amanani e-analog.

Imiphumela yokudluliswa
Inani lokuphumayo	12 edluliselwe (ngamaqembu 3). Bheka Inothi 5
Uhlobo lokukhiphayo	I-SPST-NO (Ifomu A)
Ukuhlukaniswa kwe-galvanic	Ngokudlulisela
Uhlobo lokudlulisela	I-Tyco PCN-124D3MHZ noma ihambelana nayo
Okukhiphayo okwamanje (umthwalo ophikisayo)	3A inani eliphakeme ngokuphumayo ngakunye 8Isamba esiphezulu esivamile ngokujwayelekile
Kulinganiswe ngo-voltage	250VAC/30VDC
Ubuncane bomthwalo	1mA, 5VDC
Iminyaka yokuphila	Imisebenzi engu-100k ngomthwalo omkhulu
Isikhathi sokuphendula	10ms (okujwayelekile)
Ukuvikelwa kothintana naye	Kudingeka izinyathelo zokuphepha zangaphandle (bona Ukwandisa Isikhathi Sokuphila Sokuxhumana Kumhlahlandlela Wokufaka womkhiqizo)
Amanothi:
5. Okukhiphayo 0, 1, 2, kanye no-3 kwabelana ngesignali efanayo. Okukhiphayo 4, 5, 6, kanye no-7 kwabelana ngesignali evamile. Okukhiphayo 8, 9, 10, kanye no-11 kwabelana ngesignali evamile.

Isikrini sokubonisa isithombe
Into	I-V130-R34 I-V130J-R34	I-V350-R34 I-V350J-R34	I-V430J-R34
Uhlobo LCD	I-STN, isibonisi se-LCD	I-TFT, isibonisi se-LCD	I-TFT, isibonisi se-LCD
I-backlight yokukhanyisa	I-LED emhlophe	I-LED emhlophe	I-LED emhlophe
Ukulungiswa kwesibonisi	128×64 amaphikseli	320×240 amaphikseli	480×272 amaphikseli
Viewindawo	2.4″	3.5″	4.3″
Imibala	I-Monochrome	65,536 (16-bit)	65,536 (16-bit)
Ukugqama kwesikrini	Ngesofthiwe (Inani lesitolo liye ku-SI 7, amanani ububanzi: 0 kuya ku-100%)	Kulungisiwe	Kulungisiwe
Isikrini sokuthinta	Lutho	Ukumelana, i-analog	Ukumelana, i-analog
'Thinta' inkomba	Lutho	Nge-buzzer	Nge-buzzer
Ukulawula ukukhanya kwesikrini	Ngesofthiwe (Inani lesitolo ku-SI 9, 0 = Cishiwe, 1 = Vuliwe)	Ngesofthiwe (Inani lesitolo liye ku-SI 9, amanani ububanzi: 0 kuya ku-100%)
Ikhiphedi ebonakalayo	Lutho	Ibonisa ikhibhodi ebonakalayo lapho uhlelo lokusebenza ludinga ukufakwa kwedatha.

Ikhiphedi
Into	I-V130-R34 I-V130J-R34	I-V350-R34 I-V350J-R34	I-V430J-R34
Inombolo yezikhiye	20 okhiye, okuhlanganisa 10 okhiye abanelebula umsebenzisi	5 okhiye bokusebenza abahlelekayo
Uhlobo lokhiye	I-Metal dome, i-membrane switch evaliwe
Amaslayidi	Amaslayidi angase afakwe ku-faceplate yephaneli yokusebenza ukuze alebule ngokwezifiso okhiye. Bukela ku I-V130 Yekhiphedi Amaslayidi.pdf. Isethi ephelele yamaslayidi angenalutho itholakala ngama-oda ahlukene	Amaslayidi angase afakwe ku-faceplate yephaneli yokusebenza ukuze alebule ngokwezifiso okhiye. Bukela ku I-V350 Yekhiphedi Amaslayidi.pdf. Amasethi amabili wamaslayidi ahlinzekwa nesilawuli: isethi eyodwa yezinkinobho zomcibisholo, neyodwa. isethi engenalutho.	Lutho

Uhlelo
Into	I-V130-R34 I-V130J-R34	I-V350-R34 I-V350J-R34	I-V430J-R34
Usayizi wememori
Isicelo Logic	512 KB	1MB	1MB
Izithombe	128 KB	6MB	12MB
Amafonti	128 KB	512 KB	512 KB

Uhlobo lomsebenzi /Ubuningi/Uphawu/Inani

Into	I-V130-R34 I-V130J-R34	I-V350-R34 I-V350J-R34 I-V430J-R34
Izingcezu Zenkumbulo	4096	8192	MB	Ibhithi (ikhoyili)
Inombolo Yenkumbulo	2048	4096	MI	I-16-bit isayiniwe/ayisayiniwe
AmaNamba Amade	256	512	ML	I-32-bit isayiniwe/ayisayiniwe
I-Double Word	64	256	DW	I-32-bit engasayiniwe
Inkumbulo Iyantanta	24	64	MF	I-32-bit isayiniwe/ayisayiniwe
Amabhithi Asheshayo	1024	1024	XB	I-Fast Bits (ikhoyili) - ayigciniwe
Amanani Asheshayo	512	512	XI	I-16 bit esayiniwe/ayisayiniwe (ngokushesha, ayigciniwe)
Amanani Asheshayo Amade	256	256	XL	I-32 bit esayiniwe/ayisayiniwe (ngokushesha, ayigciniwe)
I-Fast Double Word	64	64	XDW	I-32 bit engasayiniwe (ngokushesha, ayigciniwe)
Izibali sikhathi	192	384	T	I-Res. 10 ms; ubuningi 99h, 59 amaminithi, 59.99s
Izinto zokubala	24	32	C	32-bit

Amathebula Edatha
Idatha eguqukayo engu-120K (amapharamitha weresiphi, amarekhodi edatha, njll.) Idatha engashintshi engu-192K (idatha efundwayo kuphela, amagama ezithako, njll) Enwebeka ngekhadi le-SD. Bheka Inkumbulo Ekhiphekayo ngezansi
Izibonisi ze-HMI Kufika ku-1024
Isikhathi sokuskena sohlelo 20μs nge-1kb ngayinye yesicelo esijwayelekile 15μs nge-1kb ngayinye yohlelo lokusebenza olujwayelekile

Inkumbulo Ekhiphekayo

Ikhadi le-Micro SD
Ihambisana ne-SD ejwayelekile kanye ne-SDHC; kufikela ku-32GB wedatha yesitolo, Ama-alamu, Amathrendi, Amathebula Edatha, i-Ladder eyisipele, i-HMI, ne-OS. Bheka Inothi 7

Amanothi:
7.Umsebenzisi kufanele afomethe esebenzisa isisetshenziswa samathuluzi e-Unitronics SD.

Amachweba Okuxhumana
Imbobo 1	1 isiteshi, RS232/RS485 kanye nedivayisi ye-USB (V430/V350/V350J kuphela). Bheka Inothi 7
Ukuhlukaniswa kwe-galvanic	Cha
Isilinganiso se-Baud	300 kuye ku-115200 bps
RS232
Okokufaka ivoltage	±20VDC ubuningi obuphelele
Ubude bekhebula	15m ubuningi (50')
RS485
Okokufaka ivoltage	-7 kuya +12VDC umehluko omkhulu
Uhlobo lwekhebula	Ipheya esontekile evikelekile, ngokuhambisana ne-EIA 485
Ubude bekhebula	1200m ubuningi (4000')
Ama-Nodes	Kufika ku-32
Idivayisi ye-USB (V430/V350/V350J kuphela)
Uhlobo lwembobo	I-Mini-B, Bheka Inothi 9
Ukucaciswa	Isikhalazo se-USB 2.0; isivinini esigcwele
Ikhebula	Isikhalazo se-USB 2.0; kufika ku-3m
Imbobo 2 (uma uthanda)	Bheka Inothi 8
I-CANbus (uyazikhethela)	Bheka Inothi 8

Amanothi: 

• Le modeli ihlinzekwa ngembobo ye-serial: RS232/RS485 (Port 1). Izinga lisethelwe ku-RS232 noma RS485 ngokuya ngezilungiselelo ze-jumper. Bheka Umhlahlandlela Wokufaka womkhiqizo.
• Umsebenzisi anga-oda futhi afake imojuli eyodwa noma womabili kulawa alandelayo:
  • Ichweba elengeziwe (Port 2). Izinhlobo zembobo ezitholakalayo: RS232/RS485 eyedwa/engahlukanisiwe, i-Ethernet
  • Ichweba le-CANbus
    Amadokhumenti emojula yembobo ayatholakala ku-Unitronics webindawo.
• Qaphela ukuthi ukuxhuma ngokoqobo i-PC kusilawuli nge-USB kumisa ukuxhumana kwe-RS232/RS485 nge-Port 1. Uma i-PC inqanyuliwe, i-RS232/RS485 iqala kabusha.

I/O Ukwandiswa 

Indawo
Ama-I/O engeziwe angase angezwe. Ukucushwa kuyahlukahluka kuye ngemojuli. Isekela idijithali, isivinini esikhulu, i-analog, isisindo kanye nesilinganiso sokushisa kwe-I/Os.
Nge-I/O Expansion Port. Hlanganisa kufika kumamojula angu-8 Wokunweba we-I/O ahlanganisa kufika kuma-I/O engeziwe angu-128. I-adaptha iyadingeka (PN EX-A2X).

Isilawuli kude
Ngechweba le-CANbus. Xhuma ama-adaptha angama-60 ebangeni elingamamitha ayi-1000 ukusuka kusilawuli; kanye namamojula wokunweba we-I/O afika kwangu-8 ku-adaptha ngayinye (afinyelela enanini lama-I/O angu-512). I-adaptha iyadingeka (PN EX-RC1).

Okunhlobonhlobo

• Iwashi (RTC)
  • Imisebenzi yewashi lesikhathi sangempela (usuku nesikhathi)
• Isipele sebhethri
  • Iminyaka engu-7 evamile ku-25°C, ikhophi yasenqolobaneni yebhethri ye-RTC nedatha yesistimu, okuhlanganisa idatha eguquguqukayo
• Ukushintshwa kwebhethri
  • Yebo. Uhlobo lwemali engu-3V, ibhethri ye-lithium, i-CR2450

Ubukhulu

Into		I-V130-R34 I-V130J-R34	I-V350-R34 I-V350J-R34	I-V430J-R34
Usayizi	Vxxx	109 x 114.1 x 68mm (4.29 x 4.49 x 2.67”). Bheka Inothi 10	109 x 114.1 x 68mm (4.29 x 4.49 x 2.67”). Bheka Inothi 10
	Vxxx-J	109 x 114.1 x 66mm (4.92 x 4.49 x 2.59”). Bheka Inothi 10	109 x 114.1 x 66mm (4.92 x 4.49 x 2.59”). Bheka Inothi 10	136 x 105.1 x 61.3mm (5.35 x 4.13 x 2.41”). Bheka Inothi 10
Isisindo		227g (8 oz)	245g (8.64 oz)	275g (9.7 oz)

Amanothi:
Ukuze uthole ubukhulu obuqondile, bheka Umhlahlandlela Wokufaka womkhiqizo.

Imvelo
Izinga lokushisa lokusebenza	0 kuya ku-50ºC (32 kuya ku-122ºF)
Izinga lokushisa lesitoreji	-20 ukuya ku-60ºC (-4 kuya ku-140ºF)
Umswakamo Ohlobene (RH)	10% kuya ku-95% (okungafinyeleli)
Indlela yokukhweza	Iphaneli ifakwe (IP65/66/NEMA4X) I-DIN-rail ikhweziwe (IP20/NEMA1)
I-Altitude Yokusebenza	I-2000m (6562 ft)
Ukushaqeka	IEC 60068-2-27, 15G, 11ms ubude besikhathi
Ukudlidliza	IEC 60068-2-6, 5Hz kuya ku-8.4Hz, 3.5mm njalo ampi-litude, i-8.4Hz ukuya ku-150Hz, ukusheshisa kwe-1G.

Ulwazi olukulo mbhalo lubonisa imikhiqizo ngosuku lokuphrinta. I-Unironic igodla ilungelo, kuncike kuyo yonke imithetho esebenzayo, nganoma isiphi isikhathi, ngokubona kwayo kuphela, futhi ngaphandle kwesaziso, lokuyeka noma ukushintsha izici, imiklamo, izinto zokwakha kanye neminye imininingwane yemikhiqizo yayo, kanye nokuhoxisa unomphela noma okwesikhashana noma yikuphi abashiye emakethe.

Lonke ulwazi kule dokhumenti lunikezwa “njengoba lunjalo” ngaphandle kwewaranti yanoma yiluphi uhlobo, evezwayo noma eshiwo, kuhlanganisa kodwa kungagcini kunoma yiziphi iziqinisekiso ezisikiselwayo zokuthengiselana, ukufaneleka kwenjongo ethile, noma ukungaphuli umthetho. I-Unironic ayithwesi icala ngamaphutha noma ukweqiwa kolwazi olwethulwe kulo mbhalo. Akukho mcimbi lapho i-Unironic izobophezeleka kunoma yimuphi umonakalo okhethekile, oyiphutha, ongaqondile noma umphumela wanoma yiluphi uhlobo, noma yimuphi umonakalo ovela ngenxa noma ohlobene nokusetshenziswa noma ukwenziwa kwalolu lwazi.

Amagama okuhweba, izimpawu zokuhweba, amalogo kanye nezimpawu zesevisi ezivezwe kulo mbhalo, kuhlanganisa nokwakheka kwazo, kuyimpahla ye-Unironic (1989) (R”G) Ltd. noma ezinye izinkampani zangaphandle futhi awuvunyelwe ukuzisebenzisa ngaphandle kwemvume ebhalwe ngaphambili. ye-Unironic noma inkampani yangaphandle engaba umnikazi wayo
UG_V130_350_430-TR34_R34 11/22

Amadokhumenti / Izinsiza

I-UNITRONICS V130-33-TR34 Izilawuli Zengqondo Eziqinile Ezihlelekayo [pdf] Umhlahlandlela Womsebenzisi I-V130-33-TR34, V130-J-TR34, V350-35-TR34, Izilawuli Zengqondo Eziqinile Ezihlelekayo, Izilawuli Zengqondo Ezihlelekayo, Izilawuli Zokunengqondo Eziqinile, Izilawuli Zokunengqondo, Izilawuli

Izithenjwa

• Imaniwali yosebenzisayo