I-Unitronics US5-B5-B1 Isilawuli Sengqondo Esakhelwe Ngaphakathi UniStream

Lo mhlahlandlela unikeza ukufakwa okuyisisekelo kanye nemininingwane yobuchwepheshe yamamodeli e-UniStream® asohlwini olungenhla.

Izici ezijwayelekile

• Uchungechunge olwakhelwe ngaphakathi lwe-UniStreams lwe-UniStreams yi-PLC+HMI All-in-One abalawuli abahlelekayo abahlanganisa i-CPU eyakhelwe ngaphakathi, iphaneli ye-HMI, kanye nama-I/O akhelwe ngaphakathi.
• Uchungechunge lutholakala ngezinguqulo ezimbili: I-UniStream Built-in ne-UniStream Built-in Pro.

Qaphela ukuthi inombolo yemodeli ehlanganisa:

• I-B5/C5 ibhekisa ku-UniStream eyakhelwe ngaphakathi
• I-B10/C10 ibhekisela ku-UniStream eyakhelwe ngaphakathi Pro. Lawa mamodeli anikeza izici ezengeziwe, ezinemininingwane ngezansi.

Izici ezijwayelekile
HMI	§ Izikrini zokuthintwa zombala ezingazweli § Umtapo wezincwadi ocebile wedizayini ye-HMI
Izici Zamandla	§ Amathrendi namageji akhelwe ngaphakathi, i-PID eshunwe ngokuzenzakalela, amathebula edatha, idathaampling, kanye namaRecipes § UniApps™: Finyelela futhi uhlele idatha, qapha, xazulula inkinga, susa iphutha nokunye - nge-HMI noma ukude nge-VNC § Ukuphepha: Ukuvikela iphasiwedi yezinga eliningi § Ama-alamu: Isistimu eyakhelwe ngaphakathi, amazinga e-ANSI/ISA
I/O Izinketho	§ Ukucushwa kwe-I/O eyakhelwe ngaphakathi, kuyahlukahluka kuye ngemodeli § I-I/O Yasendaweni nge-UAG-CX yochungechunge lwama-adaptha okunweba i-I/O namamojula ajwayelekile e-UniStream Uni-I/O™ § Isilawuli kude se-I/O sisebenzisa i-UniStream Remote I/O noma nge-EX-RC1 § I-US15 kuphela - Hlanganisa i-I/O ohlelweni lwakho ngokusebenzisa i-UAG-BACK-IOADP, ngena kuphaneli ukuze ulungiselele konke-kokukodwa
COM Izinketho	§ Izimbobo ezakhelwe ngaphakathi: 1 Ethernet, 1 isisingathi se-USB, 1 Imbobo yedivayisi ye-USB Mini-B (i-USB-C nge-US15) § Izimbobo ze-Serial kanye ne-CANbus zingangezwa ngamamojula we-UAC-CX
COM Imithethonqubo	§ I-Fieldbus: CANopen, CAN Layer2, MODBUS, EtherCAT (amamodeli e-US15 kuphela), i-EtherNetIP nokuningi. Sebenzisa noma iyiphi i-serial RS232/485, TCP/IP, noma iphrothokholi yenkampani yangaphandle ye-CANbus ngokusebenzisa Umqambi Womlayezo § Okuthuthukisiwe: I-SNMP Umenzeli/I-Trap, i-imeyili, i-SMS, amamodemu, i-GPRS/GSM, iKlayenti le-VNC, Iseva/Iklayenti le-FTP, i-MQTT, i-REST API, iTelegramu, njll.
uHlelo Software	Isofthiwe ye-All-in-One yokucushwa kwezingxenyekazi zekhompuyutha, ukuxhumana, kanye nezinhlelo zokusebenza ze-HMI/PLC, etholakala njengokulandwa kwamahhala kwa-Unitronics.
Ithebula lokuqhathanisa	Isici	B5/C5	I-B10/C10 (Pro)
	Imemori Yesistimu	3GB	6GB
	I-Audio Jack	Cha	Yebo
	Ukusekela kwevidiyo/RSTP	Cha	Yebo
	Web Iseva	Cha	Yebo
	SQL Client	Cha	Yebo

Ngaphambi kokuthi Uqale

Ngaphambi kokufaka idivayisi, umsebenzisi kufanele:
Funda futhi uqonde lo mbhalo.

• Qinisekisa okuqukethwe kwekhithi.
• Izimpawu Zesexwayiso kanye Nemikhawulo Ejwayelekile

Uma kuvela noma yiziphi izimpawu ezilandelayo, funda ulwazi oluhlobene nalo ngokucophelela.

Uphawu	Incazelo	Incazelo
	Ingozi	Ingozi ekhonjiwe idala ukulimala ngokomzimba kanye nempahla.
	Isexwayiso	Ingozi ekhonjiwe ingadala umonakalo emzimbeni kanye nempahla.
Isexwayiso	Isexwayiso	Qaphela.

• Konke exampama-les nemidwebo ahlinzekwa ukusiza ukuqonda futhi akuqinisekisi ukusebenza. I-Unitronics ayiwamukeli umthwalo wemfanelo ngokusetshenziswa kwangempela kwalo mkhiqizo ngokusekelwe kulawa ma-exampLes.
• Sicela ulahle lo mkhiqizo ngokuya ngamazinga nemithetho kazwelonke yendawo nekazwelonke.
• Lo mkhiqizo kufanele ufakwe kuphela izisebenzi eziqeqeshiwe.
• Uma okokusebenza kusetshenziswe ngendlela engacaciswanga ngumkhiqizi, ukuvikela okuhlinzekwa yimpahla kungase konakaliswe.
• Ukwehluleka ukuthobela izinkombandlela zokuphepha ezifanele kungabangela ukulimala okukhulu noma ukulimala kwempahla.
• Ungazami ukusebenzisa le divayisi ngemingcele eyeqa amazinga avunyelwe.
• Ungaxhumeki/unqamule idivayisi uma amandla avuliwe.

Ukucatshangelwa Kwemvelo 

• Ukungenisa umoya: Kudingeka isikhala esingu-10mm phakathi kwamaphethelo aphezulu/aphansi wedivayisi kanye nezindonga zendawo ebiyelwe
• Ungafaki ezindaweni ezinothuli oluningi noma olukhiqizayo, igesi ebolayo noma evuthayo, umswakama noma imvula, ukushisa okudlulele, ukushaqeka okuvamisile noma ukudlidliza okukhulu, ngokuvumelana namazinga nemikhawulo enikezwe eshidini lemininingwane yobuchwepheshe yomkhiqizo.
• Ungacwilisi iyunithi emanzini noma uvumele amanzi ukuthi avuzele kuyo.
• Ungavumeli imfucumfucu iwele ngaphakathi kweyunithi phakathi nokufakwa.
• Faka iyunithi ngokusemandleni akho ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.

Ukuhambisana kwe-UL

• Isigaba esilandelayo sihambisana nemikhiqizo ye-Unitronics esohlwini lwe-UL.
• Amamodeli alandelayo afakwe ohlwini lwe-UL Lwezindawo Eziyingozi: US5-B5-B1, US5-B10-B1, US7-B5-B1 kanye ne-US7-B10-B1

Amamodeli alandelayo afakwe ohlwini lwe-UL Lendawo Ejwayelekile:

• I-USL ilandelwa -, ilandelwa ngu-050 noma 070 noma 101, ilandelwe yi-B05
• I-US ilandelwa ngu-5 noma 7 noma 10, ilandelwe yi--, ilandelwe yi-B5 noma i-B10 noma i-C5 noma i-C10, ilandelwe -, ilandelwe yi-B1 noma i-TR22 noma i-T24 noma i-RA28 noma i-TA30 noma i-R38 noma i-T42

Amamodeli asuka ochungechungeni lwe-US5, US7 kanye ne-US10 afaka i-“T10” noma i-“T5” egameni lemodeli afanele ukukhwezwa endaweni eyisicaba Yohlobo lwe-4X ebiyelwe. Okwesiboneloamples: US7-T10-B1, US7-T5-R38, US5-T10-RA22 and US5-T5-T42.

Indawo ye-UL Ejwayelekile

Ukuze uhlangabezane nezinga lendawo evamile ye-UL, khweza le divayisi ngephaneli endaweni eyisicaba yohlobo 1 noma 4X ezivalekile.

Izilinganiso ze-UL, Izilawuli Ezihlelekayo ezizosetshenziswa Ezindaweni Eziyingozi, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D
Lawa manothi okukhishwa ahlobene nayo yonke imikhiqizo ye-Unitronics enezimpawu ze-UL ezisetshenziselwa ukumaka imikhiqizo egunyazwe ukusetshenziswa ezindaweni eziyingozi, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D.

Isexwayiso: Lo mshini ulungele ukusetshenziswa Ekilasini I, Isigaba 2, Amaqembu A, B, C kanye no-D, noma ezindaweni ezingezona eziyingozi kuphela.

• Izintambo zokufaka nokuphumayo kufanele zihambisane nezindlela zokufaka izintambo zeSigaba I, isigaba 2 futhi ngokuhambisana negunya elinegunya.
• ISEXWAYISO—Ingozi Yokuqhuma—ukushintsha izingxenye kungase kukhinyabeze ukufaneleka Kwekilasi I, Isigaba 2.
• ISEXWAYISO – INGOZI YOKUQHUBEKA – Ungaxhumi noma unqamule amathuluzi ngaphandle uma ugesi ucishiwe noma indawo yaziwa ngokuthi ayinabungozi.
• ISEXWAYISO - Ukuchayeka kwamanye amakhemikhali kungase kwehlise izinga lokuvala le nto esetshenziswa kuma-Relay.
• Lo mshini kufanele ufakwe kusetshenziswa izindlela zokufaka izintambo njengoba kudingeka ku-Class I, Division 2 ngokwe-NEC kanye/noma i-CEC.

Iphaneli-Ukukhweza
Kuzilawuli ezihlelekayo ezingafakwa nakuphaneli, ukuze kuhlangatshezwane nezinga le-UL Haz Loc, faka iphaneli ledivayisi endaweni eyisicaba yohlobo loku-1 noma izivalo zohlobo lwe-4X.

Ukuxhumana kanye Nesitoreji Senkumbulo Esikhiphekayo
Uma imikhiqizo ihlanganisa imbobo yokuxhumana ye-USB, imbobo yekhadi le-SD, noma kokubili, indawo yekhadi le-SD noma imbobo ye-USB ayihloselwe ukuthi ixhumeke unomphela, kuyilapho imbobo ye-USB ihloselwe ukuhlela kuphela.

Ukukhipha / Ukushintsha ibhethri
Uma umkhiqizo ufakwe nebhethri, ungalikhiphi noma ushintshe ibhethri ngaphandle uma ugesi ucishiwe, noma indawo yaziwa ngokuthi ayinabungozi. Sicela uqaphele ukuthi kuyanconywa ukwenza ikhophi yasenqolobaneni yonke idatha egcinwe ku-RAM, ukuze ugweme ukulahlekelwa idatha lapho ushintsha ibhethri kuyilapho amandla evaliwe. Ulwazi lwedethi nesikhathi nalo luzodinga ukusethwa kabusha ngemva kwenqubo.

Okuqukethwe Kwekhithi

• 1 PLC+HMI isilawuli
• 4,8,10 abakaki abakhwezayo (US5/US7, US10, US15)
• 1 iphaneli yokufaka uphawu
• 2 amaphaneli asekela (US7/US10/US15 kuphela)
• Ibhulokhi yetheminali yamandla engu-1
• 2 amabhulokhi etheminali e-I/O (ahlinzekwa kuphela ngamamodeli ahlanganisa ama-I/O akhelwe ngaphakathi)
• 1 Ibhethri

Umdwebo Womkhiqizo

Ngaphambili nangemuva View 

1	Ukuvikelwa Kwesikrini	Ishidi lepulasitiki elinamathiselwe esikrinini ukuze livikeleke. Isuse ngesikhathi sokufakwa kwephaneli ye-HMI.
2	Ikhava Yebhethri	Ibhethri ihlinzekwa neyunithi kodwa kufanele ifakwe umsebenzisi.
3	Okokufaka Kokunikezela Ngamandla	Iphoyinti lokuxhuma lomthombo wamandla wesilawuli. Xhuma I-Terminal Block ehlinzekwe nekhithi ekupheleni kwekhebula lamandla.
4	I-MicroSD Slot	Isekela amakhadi e-microSD ajwayelekile.
5	I-USB Host Port	Inikeza isixhumi esibonakalayo samadivayisi e-USB angaphandle.
6	Imbobo ye-Ethernet	Isekela ukuxhumana kwe-Ethernet okunesivinini esikhulu.
7	Idivayisi ye-USB	Sebenzisa ukulanda uhlelo kanye nokuxhumana okuqondile kwe-PC-UniStream.
8	I/O I-Expansion Jack	Iphoyinti lokuxhuma le-I/O Expansion Port. Amachweba ahlinzekwa njengengxenye ye-I/O Expansion Model Kits. Amakhithi atholakala ngama-oda ahlukene. Qaphela ukuthi i-UniStream® Built-in ihambisana kuphela nama-adaptha avela ochungechungeni lwe-UAG-CX.
9	I-Audio Jack	Amamodeli we-Pro kuphela. Le 3.5mm Audio Jack ikuvumela ukuthi uxhume okokusebenza komsindo kwangaphandle.
10	I-I/O eyakhelwe ngaphakathi	Incike kumamodeli. Yethula ngamamodeli anokulungiselelwa kwe-I/O eyakhelwe ngaphakathi.
11	I-Uni-COM™ CX Module Jack	Iphoyinti lokuxhuma lamamojula we-stack-COM angafika kwangu-3. Lezi zitholakala ngama-oda ahlukene.
12	UAG-BACK-IOADP I-adaptha Jack	Iphoyinti lokuxhuma ku-UAG-BACK-IO-ADP Jack. I-adaptha itholakala nge-oda elihlukile.

Ukucatshangelwa kwesikhala sokufakwa

Yabela indawo: 

• isilawuli
• noma imaphi amamojula azofakwa
• ukufinyelela kumachweba, ojekhi, kanye nesikhala sekhadi le-MicroSD

Ukuze uthole ubukhulu obuqondile, sicela ubheke Ubukhulu Bemishini obuboniswe ngezansi.

Ubukhulu Bomshini

QAPHELA
Vumela isikhala ukuze amamojula ahlwithwe ngemuva kwesilawuli, uma kudingwa uhlelo lwakho lokusebenza. Amamojula atholakala ngama-oda ahlukene.

I-Panel Mounting

QAPHELA 

• Ugqinsi lwephaneli yokukhweza kufanele lube ngaphansi noma lulingane no-5mm (0.2”).
• Qinisekisa ukuthi ukucatshangelwa kwendawo kuyahlangatshezwa.

1. Lungiselela i-panel cut-out ngokuhambisana nobukhulu njengoba kukhonjisiwe esigabeni esidlule.
2. Shelelezisa isilawuli kusikwa, uqinisekise ukuthi Iphaneli Yokukhweza Uphawu isendaweni njengoba kukhonjisiwe ngezansi.
3. Phusha abakaki abakhwezayo ezindaweni zabo eziseceleni kwephaneli njengoba kukhonjisiwe ngezansi.
4. Qinisa izikulufu zobakaki ngokumelene nephaneli. Bamba amabakaki ngokuphepha ngokumelene neyunithi ngenkathi uqinisa izikulufu. Itorque edingekayo ngu-0.6 N·m (5 in-lb).

Uma ifakwe kahle, iphaneli ibekwe ngendlela eyisikwele kusikwa sephaneli njengoba kukhonjisiwe ngezansi.

Isexwayiso: Ungayisebenzisi i-torque engaphezu kuka-0.6 N·m (5 in-lb) wetorque ukuze uqinise izikulufu zobakaki. Ukusebenzisa amandla amaningi ukuze uqinise isikulufu kungalimaza lo mkhiqizo.

Ibhethri: Ukwenza ikhophi yasenqolobaneni, ukusetshenziswa kokuqala, ukufakwa, nokufaka esikhundleni

Yenza isipele
Ukuze ulondoloze amanani ayisipele e-RTC kanye nedatha yesistimu uma kwenzeka kucishwa, ibhethri kufanele lixhumeke.

Ukusetshenziswa Kokuqala

• Ibhethri ivikelwe ikhava ekhiphekayo ohlangothini lwesilawuli.
• Ibhethri liza lifakwe ngaphambilini ngaphakathi kweyunithi elinethebhu yepulasitiki evimbela ukuthintana. Le thebhu kufanele isuswe ngumsebenzisi ngaphambi kokusetshenziswa.

Ukufakwa kwebhethri nokufakwa esikhundleni
Sebenzisa izinyathelo ezifanele ukuze uvimbele i-Electro-Static Discharge (ESD) ngenkathi useva ibhethri.

Isexwayiso 

• Ukuze ulondoloze amanani ayisipele e-RTC kanye nedatha yesistimu phakathi nokushintshwa kwebhethri, isilawuli kufanele sinikwe amandla.
• Qaphela ukuthi ukunqamula ibhethri kumisa ukulondolozwa kwamanani ayisipele futhi kubangele ukuthi asuswe.

1. Khipha ikhava yebhethri kusilawuli njengoba kukhonjisiwe emfanekisweni ohambisana nalokhu:
   • Cindezela ithebhu kumojuli ukuze uyikhiphe.
   • Shelelisela phezulu ukuze uyisuse.
2. Uma ushintsha ibhethri, khipha ibhethri endaweni yalo eseceleni kwesilawuli.
3. Faka ibhethri, uqinisekise ukuthi i-polarity ihambisana nokumaka kwe-polarity njengoba kuboniswe emfanekisweni ohambisana nalesi sihloko.
4. Shintsha ikhava yebhethri.
5. Lahla ibhethri eselisetshenzisiwe ngokuya ngamazinga nemithetho kazwelonke yendawo nekazwelonke.

Izintambo

• Lesi sixhobo siklanyelwe ukusebenza kuphela ezindaweni ze-SELV/PELV/Class 2/Limited Power.
• Zonke izinto ezinikezwa amandla ohlelweni kufanele zifake ukufakwa kabili. Okuphumayo kokuphakelwa kwamandla kumele kukalwe njengokuthi SELV/PELV/Class 2/Limited Power.
• Ungaxhumi isignali 'Yokumaphakathi' noma 'Yomugqa' ye-110/220VAC kuphoyinti ledivayisi le-0V.
• Ungazithinti izintambo ezibukhoma.
• Yonke imisebenzi yokufaka izintambo kufanele yenziwe ngenkathi amandla EVALIWE.
• Sebenzisa ukuvikela kwamanje, okufana ne-fuse noma i-circuit breaker, ukuze ugweme amaza amaningi endaweni yokuxhuma amandla.
• Amaphoyinti angasetshenzisiwe akufanele axhunywe (ngaphandle uma kucaciswe ngenye indlela). Ukuziba lesi siqondiso kungase kulimaze idivayisi.
• Hlola kabili zonke izintambo ngaphambi kokuvula ugesi.

Isexwayiso 

• Ungasebenzisi ithini, i-solder, nanoma iyiphi into ocingweni olukhumuliwe olungase lunqamuke umucu wocingo.
• Intambo nekhebula kufanele kube nezinga lokushisa elingaphansi kuka-75°C.
• Faka ebangeni eliphezulu ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.

Inqubo yokufaka izintambo
Sebenzisa amatheminali e-crimp ukwenza izintambo; sebenzisa intambo engu-26-12 AWG (0.13 mm2 –3.31 mm2)

1. Hlikihla ucingo lube ubude obungu-7±0.5mm (0.250–0.300 amayintshi).
2. Khipha itheminali endaweni yayo ebanzi kakhulu ngaphambi kokufaka intambo.
3. Faka intambo ngokuphelele kutheminali ukuze uqinisekise uxhumano olufanele.
4. Qinisa ngokwanele ukugcina intambo ingadonsi mahhala.

Imihlahlandlela yezintambo
Ukuze uqinisekise ukuthi idivayisi izosebenza kahle futhi igweme ukuphazamiseka kwe-electromagnetic:

• Sebenzisa ikhabethe lensimbi. Qinisekisa ukuthi ikhabethe neminyango yalo kufakwe udaka ngendlela efanele.
• Sebenzisa izintambo ezinobukhulu obufanele bomthwalo.
• Sebenzisa izintambo ezisontekile ezivikelekile ukuze ufake izintambo kumasiginali we-Speed ​​​​High kanye ne-Analog I/O.
• Kunoma ikuphi, ungasebenzisi isivikelo sekhebula njengesiginali evamile / indlela yokubuya.
• Hambisa isignali ngayinye ye-I/O ngentambo yayo evamile ezinikele. Xhuma izintambo ezivamile kumaphoyinti azo avamile (CM) kusilawuli.
• Ngamunye xhuma iphoyinti elingu-0V kanye nephuzu ngalinye elivamile (CM) ohlelweni kutheminali engu-0V yokuphakela amandla, ngaphandle uma kucaciswe ngenye indlela.
• Ngamunye xhuma iphoyinti eliphansi elisebenzayo ( ) emhlabeni wesistimu (okungcono ku-chassis yekhabhinethi yensimbi). Sebenzisa izintambo ezimfishane neziwugqinsi ngangokunokwenzeka: ngaphansi kuka-1m (3.3') ubude, ubukhulu obuncane obungu-14 AWG (2 mm2).
• Xhuma ugesi ongu-0V emhlabeni wesistimu.
• Ukwenza isihlangu sezintambo:
  • Xhuma isihlangu sekhebula emhlabeni wesistimu (okungcono ku-chassis yekhabhinethi yensimbi). Qaphela ukuthi isihlangu kufanele sixhunywe kuphela ekupheleni kwekhebula; kunconywa ukuba umhlaba isihlangu at the PLC-side.
  • Gcina ukuxhumana kwesihlangu kukufushane ngangokunokwenzeka.
  • Qinisekisa ukuqhubeka kwehawu lapho unweba izintambo ezivikelekile.

Ukufaka izintambo Ukunikezwa kwamandla
Isilawuli sidinga ukunikezwa kwamandla kwangaphandle.

Uma kwenzeka voltage ukuguquguquka noma ukungavumelani nevolumutage ukucaciswa kokunikezwa kwamandla, xhuma idivayisi ekunikezeni amandla okulawulwayo. Xhuma amatheminali +V kanye no-0V njengoba kukhonjisiwe emfanekisweni ohambisana nalesi sihloko.

Ixhuma Izimbobo 

• I-Ethernet
  Intambo evikelekile ye-CAT-5e enesixhumanisi se-RJ45
• Idivayisi ye-USB
  Intambo ye-USB evamile enepulaki ye-Mini-B USB (ipulaki ye-USC-C ku-US15)
• I-USB Host
  Idivayisi ye-USB evamile enepulaki yohlobo A
• Ixhuma Umsindo
  • Ukuphuma komsindo
    Sebenzisa ipulaki yomsindo we-stereo engu-3.5mm enentambo yomsindo evikelekile.Qaphela ukuthi amamodeli we-Pro kuphela asekela lesi sici.
  • I-Audio Pinout
    1. I-headphone ishiywe ngaphandle (Ithiphu)
    2. I-Headphone Right Out (Ring
    3. Ground (Ring
    4. Ungaxhumi (Imikhono)

Qaphela ukuthi izinhlamvu “xx” ezinombolweni zemodeli zibonisa ukuthi isigaba sisebenza kuzo zombili izinhlobo ze-B5/C5 kanye ne-B10/C10.

• I-US5 -xx-TR22, US5-xx-T24 US7-xx-TR22, US7-xx-T24
• US10 -xx-TR22, US10-xx-T24 I/O Amaphuzu Okuxhumana

Ama-IO alawa mamodeli ahlelwe ngamaqembu amabili amaphuzu ayishumi nanhlanu ngalinye, njengoba kuboniswe kwizibalo ezingakwesokudla.

• Iqembu eliphezulu
  Okokufaka amaphuzu okuxhumana
• Iqembu eliphansi

Amaphoyinti okuxhumeka okukhiphayo
Umsebenzi wama-I/O athile ungashintshwa ngokusebenzisa izintambo nezilungiselelo zesofthiwe.

Ukuhlanganisa Okokufaka Kwedijithali
Konke okokufaka kwedijithali okungu-10 kwabelana ngephuzu elivamile elithi CM0. Okokufaka kwedijithali kungase kuhlanganiswe ndawonye njengosinki noma umthombo.

QAPHELA
Sebenzisa izintambo zokufaka zikasinki ukuze uxhume idivayisi ye-sourcing (pnp). Sebenzisa izintambo zokufaka zomthombo ukuze uxhume idivayisi ezikayo (npn).

Ukuhlanganisa Okokufaka kwe-Analog
Kokubili okokufaka kwabelana ngephuzu elivamile elithi CM1.

QAPHELA

• Okokufaka akuhlukanisiwe.
• Okokufaka ngakunye kunikeza izindlela ezimbili: voltage noma okwamanje. Ungasetha okokufaka ngakunye ngokuzimela.
• Imodi inqunywa ukucushwa kwehadiwe ngaphakathi kohlelo lokusebenza.
• Qaphela ukuthi uma, ngokwesiboneloample, ufaka okokufaka kwentambo kokwamanje, kufanele futhi ukusethe kube okwamanje kuhlelo lokusebenza lwesofthiwe.

Ukufaka izintambo kokuphumayo kokudlulisa (US5 -xx-TR22, US7-xx-TR22, US10-xx-TR22)
Ukuze ugweme ingcuphe yomlilo noma yokulimala kwempahla, hlala usebenzisa umthombo wamanje okhawulelwe noma xhuma idivayisi yamanje ekhawulelayo ochungechungeni noxhumana nabo abadluliswayo.

Okuphumayo kwe-relay kuhlelwe ngamaqembu amabili angawodwa:

• I-O0-O3 yabelana ngembuyiselo evamile CM2.
• I-O4-O7 yabelana ngembuyiselo evamile CM3.

Ukwandisa Isikhathi Sokuphila Sokuxhumana
Ukuze ukhuphule ubude besikhathi sokuphila koxhumana nabo abadluliswayo futhi uvikele isilawuli ekulimaleni okungaba khona ngokuhlehla kwe-EMF, xhuma:

• a clamping diode ngokuhambisana nomthwalo ngamunye we-DC ongenisayo,
• isekethe ye-RC snubber ngokuhambisana nomthwalo ngamunye we-AC ongenisayo

Ukufaka izintambo kokuphumayo kwe-Sink Transistor (US5-xx-TR22, US7-xx-TR22, US10-xx-TR22)

• Xhuma idivayisi yamanje ekhawulelayo ochungechungeni olunemiphumela ethi O8 ne-O9. Lokhu okukhiphayo akuvikelwe nge-short-circuited.
• Okukhiphayo i-O8 ne-O9 ingalungiselelwa ngokuzimela njengemiphumela evamile yedijithali noma njengemiphumela ye-PWM enesivinini esikhulu.
• Okukhiphayo i-O8 ne-O9 yabelana ngephuzu elivamile elithi CM4.

Ukufaka izintambo komthombo we-Transistor Outputs (US5-xx-T24, US7-xx-T24, US10-xx-T24)

• Ukunikezwa kwamandla okukhiphayo
  Ukusetshenziswa kwanoma yikuphi ukuphuma kudinga ukunikezwa kwamandla kwangaphandle kwe-24VDC njengoba kukhonjisiwe esithombeni esihambisana nalesi sihloko.
• Imiphumela
  Xhuma amatheminali e-+VO kanye ne-0VO njengoba kukhonjisiwe emfanekisweni ohambisana nalesi sihloko. I-O0-O11 yabelana ngembuyiselo evamile engu-0VO.

Ifaka amamojula we-Uni-I/O™ kanye ne-Uni-COM™
Bheka Imihlahlandlela Yokufaka ehlinzekwe ngala mamojula.

• Vala amandla esistimu ngaphambi kokuxhuma noma ukunqamula noma imaphi amamojula noma amadivayisi.
• Sebenzisa izinyathelo ezifanele zokuvikela ukukhishwa kwe-Electro-Static Discharge (ESD).

Ikhipha Isilawuli

1. Nqamula ukunikezwa kwamandla.
2. Susa zonke izintambo futhi unqamule noma imaphi amadivaysi afakiwe ngokuya ngomhlahlandlela wokufaka wedivayisi.
3. Khumula futhi ukhiphe amabakaki akhwezayo, unakekele ukusekela idivayisi ukuze uyivimbele ukuthi ingawi phakathi nale nqubo.

• Ulwazi olukulo mbhalo lubonisa imikhiqizo ngosuku lokuphrinta. I-Unitronics igodla ilungelo, kuncike kuyo yonke imithetho esebenzayo, nganoma yisiphi isikhathi, ngokubona kwayo kuphela, futhi ngaphandle kwesaziso, lokuyeka noma ukushintsha izici, imiklamo, izinto zokwakha kanye neminye imininingwane yemikhiqizo yayo, kanye nokuhoxisa unomphela noma okwesikhashana noma yikuphi abashiye emakethe.
• Lonke ulwazi olukule dokhumenti lunikezwa “njengoba lunjalo” ngaphandle kwewaranti yanoma yiluphi uhlobo, evezwayo noma eshiwo, kuhlanganisa kodwa kungagcini kunoma yiziphi iziqinisekiso ezisikiselwayo zokuthengiselana, ukufaneleka kwenjongo ethile, noma ukungaphuli umthetho. I-Unitronics ayithwesi icala ngamaphutha noma ukweqiwa kolwazi olwethulwe kulo mbhalo. Akukho mcimbi lapho i-Unitronics izobophezeleka khona nganoma yimuphi umonakalo okhethekile, wengozi, ongaqondile noma umphumela wanoma yiluphi uhlobo, noma yimuphi umonakalo ovela ngenxa noma ohlobene nokusetshenziswa noma ukwenziwa kwalolu lwazi.
• Amagama okuhweba, izimpawu zokuhweba, amalogo kanye nezimpawu zesevisi ezivezwe kulo mbhalo, kuhlanganisa nokwakheka kwazo, kuyimpahla ye-Unitronics (1989) (R”G) Ltd. noma ezinye izinkampani zangaphandle futhi awuvunyelwe ukuzisebenzisa ngaphandle kwemvume ebhalwe ngaphambili. ze-Unitronics noma umuntu wesithathu ongase abe ngabanikazi bazo

Imininingwane Yezobuchwepheshe

• Uchungechunge olwakhelwe ngaphakathi lwe-Unitriccs' lwe-UniStream® luyi-PLC+HMI All-in-One abalawuli abahlelekayo.
• I-UniStream ixhuma ngqo ku-UniCloud, ipulatifomu yamafu ye-Unitronics 'IIoT isebenzisa ukuxhumana okwakhelwe ngaphakathi kwe-UniCloud. Ulwazi olwengeziwe mayelana ne-UniCloud luyatholakala ku- www.unitronics.cloud.

Izinombolo zemodeli kule dokhumenti 

• Awekho ama-I/O akhelwe ngaphakathi
• 10 x Okokufaka kwedijithali, 24VDC, usinki/umthombo
• 2 x okokufaka kwe-Analog, 0÷10V / 0÷20mA, amabhithi ayi-12
• 2 x Imiphumela ye-Transistor, i-npn, kufaka phakathi iziteshi eziphumayo ze-PWM ezi-2 zejubane eliphezulu
• 8 x Imiphumela yokudlulisa
• 10 x Okokufaka kwedijithali, 24VDC, usinki/umthombo
• 2 x okokufaka kwe-Analog, 0÷10V / 0÷20mA, amabhithi ayi-12
• 12 x Imiphumela ye-Transistor, i-pnp, ehlanganisa iziteshi ezi-2 ze-PWM eziphumayo

Okujwayelekile
I-Pro, inikeza izici ezengeziwe, ezinemininingwane ngezansi

Ngokusebenza okunikwe amandla kwe-UniCloud
Ngokubhaliswa kwe-UniCloud okwakhelwe ngaphakathi kweminyaka emi-5 ngaphandle kwenkokhelo eyengeziwe edingekayo ngalesi sikhathi.

• 5” 800×480 (WVGA) isibonisi
• 7” 800×480 (WVGA) isibonisi
• 10.1” 1024×600 (WSVGA) isibonisi
• 15.6” 1366 x 768 (HD) isibonisi

Imihlahlandlela yokufaka iyatholakala ku-Unitronics Technical Library ku www.unitronicsplc.com.

Ukunikezwa kwamandla kagesi		I-USx-xx-B1	I-USx-xx-TR22	I-USx-xx-T24
Okokufaka ivoltage		I-12VDC noma i-24VDC	24VDC	24VDC
Ibanga elivumelekile		10.2VDC ukuze 28.8VDC	20.4VDC ukuze 28.8VDC	20.4VDC ukuze 28.8VDC
Ubukhulu. okwamanje ukusetshenziswa	US5	0.7A @ 12VDC 0.4A @ 24VDC	0.44A @ 24VDC	0.4A @ 24VDC
	US7	0.79A @ 12VDC 0.49A @ 24VDC	0.53A @ 24VDC	0.49A @ 24VDC
	US10	0.85A @ 12VDC 0.52A @ 24VDC	0.56A @ 24VDC	0.52A @ 24VDC
	US15	2.2A @ 12VDC 1.1A @ 24VDC	Lutho	Lutho
Ukuzihlukanisa		Lutho

Bonisa	I-UniStream 5″	I-UniStream 7″	I-UniStream 10.1″	I-UniStream 15.6″
Uhlobo lwe-LCD	I-TFT
Uhlobo lwasemuva	I-LED emhlophe
Amandla okukhanya (ukukhanya)	Ngokuvamile ama-nits angu-350 (cd/m2), ku-25°C	Ngokuvamile ama-nits angu-400 (cd/m2), ku-25°C	Ngokuvamile ama-nits angu-300 (cd/m2), ku-25°C	Ngokuvamile ama-nits angu-400 (cd/m2), ku-25°C
Ukuphila okude kwe-backlight	30k amahora
Ukulungiswa (amaphikiseli)	800x480 (WVGA)		1024 x 600 (WSVGA)	1366 x 768 (HD)
Usayizi	5”	7″	10.1″	15.6”
Viewindawo	Ububanzi x Ubude (mm) 108 x 64.8	Ububanzi x Ubude (mm) 154.08 x 85.92	Ububanzi x Ubude (mm) 222.72 x 125.28	Ububanzi x Ubude (mm) 344.23 x 193.53
Ukwesekwa kombala	65,536 (16bit)			I-16M (24bit)
Ukwelashwa kwendawo	I-anti-glare
Isikrini sokuthinta	I-Analog Engazweli
Amandla okusebenza (amaminithi)	> 80 g (0.176 lb)

Okujwayelekile
I/O ukwesekwa	Kufika kumaphoyinti angu-2,048 e-I/O
I-I/O eyakhelwe ngaphakathi	Ngokusho imodeli
Ukunwetshwa kwe-I/O yendawo	Ukuze ungeze ama-I/O endawo, sebenzisa i-UAG-CX I/O Adapter Yokunweba. Lawa ma-adaptha ahlinzeka ngendawo yokuxhuma yamamojula ajwayelekile e-UniStream Uni-I/O™. Ungakwazi ukuxhuma amamojula angu-80 e-I/O kusilawuli esisodwa usebenzisa lawa ma-adaptha. I-US15 kuphela - Hlanganisa i-I/O ohlelweni lwakho ngokusebenzisa i-adaptha ye-UAG-BACK-IOADP, ngena kuphaneli ukuze uthole ukucushwa kwakho konke.
I-I/O ekude	Kufikela Ku-8 UniStream Remote I/O Adapter (URB)

Amachweba Okuxhumana
Izimbobo ze-COM ezakhelwe ngaphakathi	Imininingwane inikezwe ngezansi esigabeni esithi Ukuxhumana
Izimbobo zokwengeza	Engeza izimbobo ezingafika kwezi-3 kusilawuli esisodwa usebenzisa amamojula we-Uni-COM™ UAC-CX

Inkumbulo yangaphakathi	Okujwayelekile (B5/C5)	I-Pro (B10/C10)
	I-RAM: 512MB I-ROM: Imemori yesistimu ye-3GB 1GB inkumbulo yomsebenzisi	RAM: 1GB I-ROM: Imemori yesistimu ye-6GB 2GB inkumbulo yomsebenzisi
Inkumbulo yesitebhisi	1 MB
Inkumbulo yangaphandle	microSD noma microSDHC ikhadi Usayizi: kufika ku-32GB, Isivinini sedatha: kufika ku-200Mbps
Ukusebenza kancane	0.13µs
Ibhethri	Imodeli: 3V CR2032 Lithium battery Isikhathi sokuphila kwebhethri: iminyaka emi-4 ejwayelekile, ku-25°C Ukutholwa kwebhethri Liphansi kanye nenkomba (nge-HMI nangeSistimu Tag).

Umsindo (amamodeli we-Pro B10/C10 kuphela)
I-Bit Rate	192kbps
Ukuhambisana komsindo	I-stereo MP3 files
Isixhumi esibonakalayo	3.5mm ujeke wokuphuma komsindo - sebenzisa ikhebuli yomsindo evikelekile engafika ku-3 m (9.84 ft)
Impedance	16Ω, 32Ω
Ukuzihlukanisa	Lutho

Ividiyo (amamodeli we-Pro B10/C10 kuphela)
Amafomethi Asekelwe	I-MPEG-4 Visual, AVC/H.264

Ukuxhumana (Amachweba Akhelwe Ngaphakathi)	US5, US7, US10	US15
Imbobo ye-Ethernet
Inombolo yezimbobo	1	2
Uhlobo lwembobo	10/100 Base-T (RJ45)
I-Auto crossover	Yebo
Ukuxoxisana okuzenzakalelayo	Yebo
Ukuzihlukanisa voltage	500VAC iminithi elingu-1
Ikhebula	Ikhebula le-CAT5e elivikelwe, elingafika ku-100 m (328 ft)
Idivayisi ye-USB
Uhlobo lwembobo	I-Mini-B	I-USB-C
Izinga ledatha	I-USB 2.0 (480Mbps)
Ukuzihlukanisa	Lutho
Ikhebula	I-USB 2.0 iyahambisana; < 3 m (9.84 ft)
Umphathi we-USB
Ngaphezu kokuvikela kwamanje	Yebo

Okokufaka Kwedijithali (amamodeli e-T24, TR22)
Inombolo yokokufaka	10
Uhlobo	Usinki noma Umthombo
Ukuzihlukanisa voltage
Okokufaka ebhasini	500VAC iminithi elingu-1
Okokufaka kokokufaka	Lutho
Okuzisholo voltage	24VDC @ 6mA
Okokufaka ivoltage
Usinki/Umthombo	Esimeni: 15-30VDC, 4mA min. Isimo esingasebenzi: 0-5VDC, 1mA max.
I-impedance yamagama	4kΩ
Hlunga	6ms ejwayelekile

Okokufaka kwe-Analog (T24, TR22 model)
Inombolo yokokufaka	2
Ibanga lokokufaka (6) (Iphutha! Umthombo wenkomba awutholakali.)	Uhlobo Lokufaka		Amanani Okuqokwa			Amanani Obubanzi obungaphezulu *
	0 ÷ 10VDC		0 ≤ Vin ≤ 10VDC			10 < Vin ≤ 10.15VDC
	0 ku20mA		0 ≤ Iin ≤ 20mA			20 < Iin ≤ 20.3mA
	* Ukuchichima (7) liyamenyezelwa lapho inani lokokufaka lidlula umngcele Ongaphezu Kobubanzi.
Isilinganiso esiphezulu ngokuphelele	±30V (Voltage), ±30mA (Okwamanje)
Ukuzihlukanisa	Lutho
Indlela yokuguqula	Ukulinganisa okulandelanayo
Isixazululo	12 amabhithi
Ukunemba (25°C / -20°C kuya ku-55°C)	±0.3% / ±0.9% wesilinganiso esigcwele
I-impedance yokokufaka	541kΩ (Voltage), 248Ω (Okwamanje)
Ukwenqatshwa komsindo	10Hz, 50Hz, 60Hz, 400Hz
Impendulo yesinyathelo (8) (0 kuya ku-100% yenani lokugcina)	Ukushelela	Imvamisa Yokwenqaba Umsindo
		400Hz		60Hz	50Hz		10Hz
	Lutho	2.7ms		16.86ms	20.2ms		100.2ms
	Buthaka	10.2ms		66.86ms	80.2ms		400.2ms
	Maphakathi	20.2ms		133.53ms	160.2ms		800.2ms
	Iqinile	40.2ms		266.86ms	320.2ms		1600.2ms

Isikhathi sokubuyekeza (8)	Imvamisa Yokwenqaba Umsindo	Isikhathi sokubuyekeza
	400Hz	5ms
	60Hz	4.17ms
	50Hz	5ms
	10Hz	10ms
Ibanga lesiginali yokusebenza (isiginali + imodi evamile)	Voltagimodi ye-e – AIx: -1V ÷ 10.5V ; CM1: -1V ÷ 0.5V Imodi yamanje – AIx: -1V ÷ 5.5V ; I-CM1: -1V ÷ 0.5V (x=0 noma 1)
Ikhebula	Ipheya esontekile evikelekile
Ukuxilonga (7)	Ukuchichima kokufaka kwe-analogi

I-Relay Outputs (USx-xx-TR22)
Inani lokuphumayo	8 (O0 ukuya ku-O7)
Uhlobo lokukhiphayo	Ukudluliselwa, SPST-NO (Ifomu A)
Amaqembu wokuzihlukanisa	Amaqembu amabili anemiphumela emi-4 ngalinye
Ukuzihlukanisa voltage
Iqembu ebhasini	1,500VAC iminithi elingu-1
Iqembu ngeqembu	1,500VAC iminithi elingu-1
Okukhiphayo kokuphumayo ngaphakathi kweqembu	Lutho
Okwamanje	2A umkhawulo okukhiphayo ngakunye (Umthwalo ophikisayo)
Voltage	250VAC / 30VDC esiphezulu
Ubuncane bomthwalo	1mA, 5VDC
Ukushintsha isikhathi	10ms umkhawulo
Ukuvikelwa kwe-short-circuit	Lutho
Ubude bempilo (9)	Imisebenzi engu-100k ngomthwalo omkhulu

I-Sink Transistor Outputs (USx-xx-TR22)
Inani lokuphumayo	2 (O8 kanye ne-O9)
Uhlobo lokukhiphayo	I-Transistor, iSink
Ukuzihlukanisa
Okukhiphayo ebhasini	1,500VAC iminithi elingu-1
Okukhiphayo kokuphumayo	Lutho
Okwamanje	50mA ubukhulu. ngokukhishwa ngakunye
Voltage	Igama: 24VDC Ububanzi: 3.5V ukuze 28.8VDC
On state voltage kwehle	Ama-1V max
I-off state ukuvuza kwamanje	10µA ubuningi
Ukushintsha izikhathi	Ukuvula: 1.6ms max. )4kΩ umthwalo, 24V) Ukuvala: 13.4ms max. )4kΩ umthwalo, 24V)
Imiphumela yesivinini esiphezulu
Imvamisa ye-PWM	0.3Hz iminithi. 30kHz ubukhulu. )4kΩ umthwalo(
Ikhebula	Ipheya esontekile evikelekile

Umthombo we-Transistor Outputs (USx-xx-T24)
Inani lokuphumayo	12
Uhlobo lokukhiphayo	I-Transistor, Umthombo (pnp)
Ukuzihlukanisa voltage
Okukhiphayo ebhasini	500VAC iminithi elingu-1
Okukhiphayo kokuphumayo	Lutho
Ukunikezwa kwamandla okuphuma ebhasini	500VAC iminithi elingu-1
Ikhipha amandla okukhiphayo	Lutho
Okwamanje	0.5A inani eliphakeme ngokuphumayo ngakunye
Voltage	Bheka ukucaciswa komthombo wamandla we-Transistor Outputs ngezansi
ON state voltage kwehle	0.5V esiphezulu
VALIWE isimo samanje sokuvuza	10µA esiphezulu
Ukushintsha izikhathi	Ukuvula: 80ms esiphezulu, Ukuvala: 155ms esiphezulu (Ukumelana nomthwalo <4kΩ(
Imvamisa ye-PWM (10)	O0, O1: 3kHz ubukhulu. (Ukumelana nomthwalo <4kΩ)
Ukuvikelwa kwe-short-circuit	Yebo

Umthombo Wamandla We-Transistor Outputs (USx-xx-T24)
Okuzisholo ukusebenza voltage	24VDC
I-vol esebenzayotage	20.4 - 28.8VDC
Ukusetshenziswa kwamanje okuphezulu	30mA@24VDC Ukusetshenziswa kwamanje akufaki ukulayisha kwamanje

Ezemvelo	US5, US7, US10	US15
Ukuvikelwa	Ubuso bangaphambili: IP66, NEMA 4X Uhlangothi lwangemuva: IP20, NEMA1
Izinga lokushisa lokusebenza	-20°C kuya ku-55°C (-4°F kuya ku-131°F)	0°C ukuya ku-50°C (32°F ukuya ku-122°F)
Izinga lokushisa lesitoreji	-30°C kuya ku-70°C (-22°F kuya ku-158°F)	-20°C kuya ku-60°C (-4°F kuya ku-140°F)
Umswakamo Ohlobene (RH)	5% kuya ku-95% (okungafinyeleli)
I-Altitude Yokusebenza	2,000 m (6,562 ft)
Ukushaqeka	IEC 60068-2-27, 15G, 11ms ubude besikhathi
Ukudlidliza	IEC 60068-2-6, 5Hz kuya ku-8.4Hz, 3.5mm njalo ampi-litude, i-8.4Hz ukuya ku-150Hz, ukusheshisa kwe-1G

Ubukhulu	Isisindo	Usayizi
I-US5-xx-B1	0.31Kg (0.68 lb)	Bheka izithombe ezisekhasini lesi-7
I-US5-xx-TR22	0.37Kg (0.81 lb)
I-US5-xx-T24	0.35Kg (0.77 lb)
I-US7-xx-B1	0.62Kg (1.36 lb)	Bheka izithombe ezisekhasini lesi-8
I-US7-xx-TR22	0.68Kg (1.5 lb)
I-US7-xx-T24	0.68Kg (1.5 lb)
I-US10-xx-B1	1.02Kg (2.25 lb)	Bheka izithombe ezisekhasini lesi-8
I-US10-xx-TR22	1.08Kg (2.38 lb)
I-US10-xx-T24	1.08Kg (2.38 lb)
I-US15-xx-B1	2.68Kg (5.9 lb)	Bheka izithombe ezisekhasini lesi-9

Amanothi: 

1. Ukuphila okujwayelekile kokukhanya kwangemuva kwephaneli ye-HMI yisikhathi lapho ukukhanya kwayo kwehla kuze kufike ku-50% weleveli yayo yoqobo.
2. I-UAG-CX Expansion Adapter Kits iqukethe iyunithi ye-Base, iyunithi Yokuphela, nekhebuli yokuxhuma. I-Base Unit ixhuma ku-I/O Expansion Jack yesilawuli futhi ivumela ukuxhunywa kwamamojula ajwayelekile e-UniStream Uni-I/O™. Ukuze uthole imininingwane eyengeziwe, bheka inkomba yokufaka yomkhiqizo kanye nemininingwane yobuchwepheshe.
3. Amamojula e-Uni-COM™ CX axhunywe ngqo ku-Uni-COM™ CX Module Jack ngemuva kwesilawuli. Amamojula we-UAC-CX angafakwa ekucushweni okulandelayo:
   1. Uma i-serial port module inamathiselwe ngqo ngemuva kwe-UniStream, ingalandelwa kuphela enye imojuli ye-serial, ngengqikithi yamamojula amabili.
   2. Uma ukucushwa kufaka imojula ye-CANbus, kufanele ixhunywe ngqo ngemuva kwe-UniStream futhi ingalandelwa amamojula afinyelela kwamabili, ngesamba samamojula amathathu. Ukuze uthole ulwazi olwengeziwe, bheka inkomba yokufaka yomkhiqizo kanye nemininingwane yobuchwepheshe.
4. Lapho ushintsha ibhethri leyunithi, qiniseka ukuthi ibhethri elisha lihlangabezana noma lidlula izicaciso zemvelo ezibalulwe kulo mbhalo.
5. Imbobo yedivayisi ye-USB isetshenziswa ukuxhuma idivayisi ku-PC.
6. Inketho yokufaka engu-4-20mA isetshenziswa kusetshenziswa uhla lokokufaka lwe-0-20mA. Okokufaka kwe-analogi kukala amanani ngaphezudlwana kobubanzi bokufaka okuzisholo (Okokufaka Over-range). Uma ukuchichima kokufaka kwenzeka, Isimo se-I/O esihambisanayo tag ibonisa lokhu, kuyilapho inani lokufaka lirekhodwa njengenani eliphakeme elivumelekile. Okwesiboneloample, uma ububanzi bokufaka bungu-0 kuye ku-10V, amanani angaphezu kwebanga angafika ku-10.15V, nanoma iyiphi ivolumu yokufakatage ngenhla ezobhalisa njenge-10.15V, ngohlelo lokuchichima tag yenziwe yasebenza.
7. Imiphumela yokuxilonga iboniswa ohlelweni tags futhi kungaba viewihlelwe nge-UniApps™ noma isimo esiku-inthanethi se-UniLogic™.
8. Isinyathelo sokuphendula nesikhathi sokubuyekeza kuncike enanini lamashaneli asetshenziswayo.
9. Ubude besikhathi bempilo yoxhumana nabo abadluliswayo buhlukahluka kuye ngohlelo lokusebenza. Umhlahlandlela wokufaka womkhiqizo unikeza imihlahlandlela yokusebenzisa abathintwayo abanezintambo ezinde noma imithwalo ye-inductive.
10. Imiphumela ye-O0 ne-O1 ingalungiselelwa njengokuphumayo okujwayelekile kwedijithali noma njengemiphumela ye-PWM. Ukucaciswa kokuphuma kwe-PWM kusebenza kuphela lapho okuphumayo kulungiselelwa njengokuphuma kwe-PWM.

• Ulwazi olukulo mbhalo lubonisa imikhiqizo ngosuku lokuphrinta. I-Unitronics igodla ilungelo, kuncike kuyo yonke imithetho esebenzayo, nganoma yisiphi isikhathi, ngokubona kwayo kuphela, futhi ngaphandle kwesaziso, lokuyeka noma ukushintsha izici, imiklamo, izinto zokwakha kanye neminye imininingwane yemikhiqizo yayo, kanye nokuhoxisa unomphela noma okwesikhashana noma yikuphi abashiye emakethe.
• Lonke ulwazi olukule dokhumenti lunikezwa “njengoba lunjalo” ngaphandle kwewaranti yanoma yiluphi uhlobo, evezwayo noma eshiwo, kuhlanganisa kodwa kungagcini kunoma yiziphi iziqinisekiso ezisikiselwayo zokuthengiselana, ukufaneleka kwenjongo ethile, noma ukungaphuli umthetho. I-Unitronics ayithwesi icala ngamaphutha noma ukweqiwa kulwazi olwethulwe kuyo
  lo mbhalo. Akukho mcimbi lapho i-Unitronics izobophezeleka khona nganoma yimuphi umonakalo okhethekile, wengozi, ongaqondile noma umphumela wanoma yiluphi uhlobo, noma yimuphi umonakalo ovela ngenxa noma ohlobene nokusetshenziswa noma ukwenziwa kwalolu lwazi.
• Amagama okuhweba, izimpawu zokuhweba, amalogo kanye nezimpawu zesevisi ezivezwe kulo mbhalo, kuhlanganisa nokwakheka kwazo, kuyimpahla ye-Unitronics (1989) (R”G) Ltd. noma ezinye izinkampani zangaphandle futhi awuvunyelwe ukuzisebenzisa ngaphandle kwemvume ebhaliwe yangaphambili ye-Unitronics noma lowo muntu wesithathu ongase abe umnikazi wazo.

FAQ

Q: Ngingakwazi ukufaka iyunithi endaweni enomswakama ophezulu?
A: Akunconywa ukufaka iyunithi ezindaweni ezinomswakama owedlulele. Qinisekisa ukulandela ukucatshangelwa kwemvelo okucacisiwe.

Q: Iyiphi isofthiwe yokuhlela ehambisana nedivayisi?
A: Lolu cingo luhambisana nesofthiwe yakho konke okukodwa etholakalayo njengokulandwa kwamahhala ku-Unitronics yokucushwa kwezingxenyekazi zekhompuyutha, ukuxhumana, kanye nezinhlelo zokusebenza ze-HMI/PLC.

Amadokhumenti / Izinsiza

I-Unitronics US5-B5-B1 Yakhelwe Ngaphakathi Kwe-UniStream Isilawuli Esinengqondo Esihlelekayo [pdf] Umhlahlandlela Womsebenzisi I-US5-B5-B1, US5-B5-B1 Yakhelwe Ngaphakathi Kwe-UniStream Isilawuli Sengqondo Ehlelekayo, I-UniStream Programmable Logic Controller, UniStream Programmable Logic Controller, Programmable Logic Controller, Isilawuli Esinengqondo

Izithenjwa

• Imaniwali yosebenzisayo