I-UCTRONICS RM0004 Pi Rack Pro ye-Raspberry Pi 4B Umhlahlandlela Wokufaka
Nika amandla i-i2c1 bese usetha isivinini
sudo nano /boot/config.txt Engeza umyalo olandelayo ku /boot/config.txt file: dtparam=i2c_arm=on,i2c_arm_baudrate=400000
Londoloza bese uphuma.
Engeza umsebenzi wokuvala shaqa
Cindezela inkinobho yamandla bese ulungisa umbhalo olandelayo ukuze usebenzise umsebenzi wokuvala shaqa ngokuphephile.
sudo nano /boot/config.txt
Engeza umyalo olandelayo ku- /boot/config.txt file:
dtoverlay=gpio-shutdown,gpio_pin=4,active_low=1,gpio_pull=up
Londoloza futhi uphume, bese uqalisa kabusha:
sudo qala kabusha
Lungiselela iskripthi sokuqala semanuwali
Clone umtapo wezincwadi we-SKU_RM0004
i-git clone https://github.com/UCTRONICS/SKU RM0004.git
Hlanganisa
cd SKU RM0004
yenza
Gijima
./bonisa
Bese Engeza umbhalo wokuqala ozenzakalelayo
Vula i-rc.local file
sudo nano /etc/rc.local
Engeza umyalo ku-the0of the rc.yasendaweni file
cd /home/pi/SKU RM0004
hlanza
yenza
./bonisa &
Londoloza futhi uphume, bese uqalisa kabusha: sudo qala kabusha
Jabulela
Manje isibonisi sakho se-OLED sesilungiselelwe ukuthi sibonise i-IP/CPU/RAM/DISK/TEMP, kuyilapho ujabulela ukuvala shaqa okuphephile futhi ukhanyisa ngokuchofoza nje inkinobho yokuvula/ukuvala.
OKUQUKETHWE IPHAKEJI
KUQHUBEKILE VIEW
UKUFAKA
XHUMANA NATHI
Uma kukhona inkinga, zizwe ukhululekile ukuxhumana nathi.
Webindawo: www.uctronics.com
Thumela i-imeyili: support@uctronics.com
Amadokhumenti / Izinsiza
 |
I-UCTRONICS RM0004 Pi Rack Pro ye-Raspberry Pi 4B [pdf] Umhlahlandlela wokufaka I-RM0004 Pi Rack Pro ye-Raspberry Pi 4B, RM0004, i-Pi Rack Pro ye-Raspberry Pi 4B, i-Raspberry Pi 4B |
