I-TrueNAS M-Series Basic Setup Guide

Ulwazi Lomkhiqizo

I-3rd Generation M-Series Unified Storage Array iyi-4U, 24-bay, uhlu oluhlanganisiwe lokugcina idatha. Inezinto zamandla ezingafuneki kanye nezilawuli ezifika kwezimbili ze-TrueNAS. Uhlelo luza nohlelo lokusebenza lwe-TrueNAS olulayishwe ngaphambili.

Qaphela: I-3rd Generation TrueNAS M-Series izinhlelo zinedizayini ye-chassis ehlangene evumela amakhasimende ukuthi azithuthukise ngezilawuli ezinamandla kakhudlwana. Amakhasimende angathuthukisa i-M30 ibe yi-M40, i-M40 ibe i-M50, noma i-M50 ibe i-M60. Ukuze uthole ulwazi olwengeziwe mayelana nokuthuthukiswa, khuluma Nokuthengiswa kwe-iXsystems noma Omele Ukusekela.

Imiyalo yokusetshenziswa komkhiqizo

Ukucatshangelwa Kokuphepha

• Ukukhipha Okumile: Ngaphambi kokuvula ikesi lesistimu noma ukuphatha izingxenye zesistimu ezingashisi ezishintshwayo, khumbula ubungozi bokukhipha i-electrostatic discharge (ESD) ebangelwa ugesi omile. Kuyingozi ezintweni zikagesi ezibucayi nasezintweni.
• Ukuphatha Uhlelo: I-M-Series inesisindo esingu-75 lbs ehlisiwe futhi idinga okungenani abantu ababili ukuyiphakamisa. Ungalokothi uzame ukuphakamisa isistimu elayishwe ngamadrayivu. Faka isistimu endaweni yokubeka ngaphambi kokwengeza amadrayivu futhi ukhiphe amadrayivu ngaphambi kokukhipha isistimu. Lapho uphatha ama-rails, izingxenye zesistimu, noma amadrayivu, ungalokothi uphoqe ukunyakaza uma ingxenye ibonakala ibambekile. Khipha kancane ingxenye bese uhlola izintambo eziphiniwe noma into evimbelayo ngaphambi kokuyifaka futhi. Bamba isistimu ukusuka emaceleni noma phansi noma nini lapho kunokwenzeka futhi ukhumbule ukuxega okuxekethile noma izixhumi ukuze ugweme umonakalo noma ukulimala komuntu siqu.

Izimfuneko

Sincoma amathuluzi alandelayo lapho ufaka isistimu ye-M-Series endaweni yokubeka:

• Ukusekela: 855-473-7449 noma 1-408-943-4100

Izingxenye

Iphakheji ye-TrueNAS M-Series Unified Storage Array ihlanganisa izingxenye ezilandelayo:

• I-M-Series Unified Storage Array
• I-Bezel (Uma uthanda)
• Isethi yama-rack-mount rails
• Kufika kumathreyi okushayela angu-24 noma ama-air baffles, kuye ngenani lamadrayivu athengwe ngohlelo

Uma kukhona umonakalo wokuthumela noma izingxenye ezingekho, sicela uthathe izithombe futhi uxhumane nosekelo lwe-iXsystems ngokushesha support@ixsystems.com, 1-855-GREP4-iX (1-855-473-7449), noma 1-408-943-4100. Ukuze uthole ireferensi esheshayo, thola futhi urekhode izinombolo ze-serial zehadiwe ngemuva kwe-chassis ngayinye. Khumula ngokucophelela amabhokisi okuthumela futhi uthole lezi zingxenye.

Isingeniso

I-3rd Generation M-Series Unified Storage Array iyi-4U, 24-bay, uhlu oluhlanganisiwe lokugcina idatha. Inezinto zamandla ezingafuneki kanye nezilawuli ezifika kwezimbili ze-TrueNAS.

Qaphela: I-3rd Generation TrueNAS M-Series izinhlelo zinedizayini ye-chassis ehlangene evumela amakhasimende ukuthi azithuthukise ngezilawuli ezinamandla kakhudlwana. Amakhasimende angathuthukisa i-M30 ibe yi-M40, i-M40 ibe i-M50, noma i-M50 ibe i-M60. Khuluma Nokuthengiswa kwe-iXsystems noma Ummeleli Wosekelo ukuze uthole ulwazi olwengeziwe.

Isistimu yakho iza nesistimu yokusebenza ye-TrueNAS elayishwe ngaphambili.
Review ukucatshangelwa kokuphepha kanye nezidingo zehadiwe ngaphambi kokufaka isistimu ye-M-Series endaweni yokubeka.

Ukuphepha

Ukukhipha Okumile

Isexwayiso: Ugesi oqinile unganqwabelana emzimbeni wakho futhi uphume lapho uthinta izinto ezisetshenziswayo. I-Electrostatic Discharge (ESD) iyingozi kumishini kagesi ebucayi kanye nezingxenye. Gcina lezi zincomo zokuphepha engqondweni ngaphambi kokuvula ikesi lesistimu noma ukuphatha izingxenye zesistimu ezingashisi-shi.

• Vala isistimu futhi ukhiphe izintambo zikagesi ngaphambi kokuvula ikesi noma ukuthinta izingxenye zangaphakathi.
• Beka isistimu endaweni ehlanzekile, yomsebenzi onzima efana netafula lokhuni. Sebenzisa i-ESD dissipative mat uma kungenzeka ukuze uvikele izingxenye zangaphakathi.
• Thinta i-chassis yensimbi ngesandla sakho esingenalutho ukuze uchithe ugesi omile emzimbeni wakho ngaphambi kokuphatha noma yiziphi izingxenye zangaphakathi, okuhlanganisa izingxenye ezingakafakwa ohlelweni. Sincoma njalo ukuthi ugqoke i-wristband ephikisana ne-static futhi usebenzise ikhebula eliphansi.
• Gcina zonke izingxenye zesistimu kuma-anti-static bags.

Ukuphatha Uhlelo

Isexwayiso

• I-M-Series inesisindo esingu-75 lbs ehlisiwe futhi idinga okungenani abantu ababili ukuyiphakamisa.
• Ungalokothi uzame ukuphakamisa isistimu ye-M-Series elayishwe amadrayivu! Faka isistimu endaweni yokubeka ngaphambi kokwengeza amadrayivu, futhi ukhiphe amadrayivu ngaphambi kokukhipha isistimu.
• Lapho uphatha ama-rails, izingxenye zesistimu, noma amadrayivu, ungalokothi uphoqe ukunyakaza uma ingxenye ibonakala ibambekile. Khipha kancane ingxenye bese uhlola izintambo eziphiniwe noma into evimbelayo ngaphambi kokuyifaka futhi. Ukufaka ingxenye enamandla amakhulu kungalimaza isistimu noma kubangele ukulimala komuntu siqu.

Bamba isistimu ukusuka emaceleni noma phansi noma nini lapho kunokwenzeka. Hlala ukhumbula ikhebula elixegayo noma izixhumi, futhi ugweme ukumpintsha noma ukungqubuza lezi zakhi. Le miyalo isebenzisa “kwesokunxele” kanye “nokwesokudla” ngokuya ngokubuka kwakho lapho ubheke phambili kwesistimu noma i-rack.

Izimfuneko

Sincoma lawa mathuluzi uma ufaka isistimu ye-M-Series endaweni yokubeka:

• Isikrini se-screwdriver se- # 2
• I-screwdriver yekhanda eliyisicaba
• Intambo yoku kala
• Izinga

Izingxenye ze-M-Series

Amayunithi e-TrueNAS apakishwa ngokucophelela futhi athunyelwa nabathwali abathembekile ukuze afike esimweni esihle. Uma kukhona umonakalo wokuthumela noma izingxenye ezingekho, sicela uthathe izithombe futhi uxhumane nosekelo lwe-iXsystems ngokushesha support@ixsystems.com, 1-855-GREP4-iX (1-855-473-7449), noma 1-408-943-4100. Sicela uthole futhi urekhode izinombolo ze-serial zehadiwe ngemuva kwe-chassis ngayinye ukuze uthole ireferensi esheshayo.

Khipha ngokucophelela amabhokisi okuthumela futhi uthole lezi zingxenye:

Izinkomba zangaphambili

Amadlebe angaphambili anamandla, thola i-ID, iphutha, nezinkomba zomsebenzi wenethiwekhi. Inkomba yephutha ivuliwe ngesikhathi sokuqala sokuzihlola kwamandla (i-POST) futhi iyacima phakathi nokusebenza okuvamile. Iyavula uma isofthiwe ye-TrueNAS ikhipha isexwayiso.

Ukukhanya / Inkinobho	Umbala kanye Inkomba
	Okuluhlaza okwesibhakabhaka: Isistimu ivuliwe
	N/A: Inkinobho yokusetha kabusha
ID	Okuluhlaza okwesibhakabhaka: Thola i-ID iyasebenza
	Okubomvu: Iphutha / Isexwayiso
	I-Amber: Isixhumanisi Siyasebenza

Izingxenye Zasemuva namachweba

• I-M-Series ifaka isilawuli esisodwa noma ezimbili ze-TrueNAS ekucushweni okungaphezulu nangaphansi.

M-Series Ukunwetshwa Slots

Izikhala zokunweba ku-M-Series zibekelwe amakhadi athile noma ukusetshenziswa kwangaphakathi:

	Isikhala A	Isikhala B	Isikhala C	Isikhala D	Isikhala E	Isikhala F
M30	I-NIC noma i-FC	N/A	I-NTB	N/A	Ngaphakathi SAS	I-NIC yesibili
M40	I-NIC	N/A	I-NTB	I-SAS yangaphandle	Ngaphakathi SAS	4x NVME Riser, NIC2, noma FC
M50	I-NIC1	I-SAS1 yangaphandle	I-NIC2 noma i-FC	I-SAS2 yangaphandle	I-NTB	I-SAS yangaphakathi
M60	I-NIC1	I-SAS1 yangaphandle	I-SAS3 yangaphandle, I-NIC2, noma i-FC	I-SAS2 yangaphandle	I-NTB	I-SAS yangaphakathi

Rack the M-Series

• I-M-Series idinga isikhala esingu-4U ku-rack ethobelayo ye-EIA-310 engu-27” (686mm) ejulile, ifreyimu ukuze ibe yifreyimu.
• Izigxobo ezimile kufanele zibe phakathi kuka-26” (660.4mm) no-36” (914.4mm) ngokuhlukana ukuze kufakwe ama-rails ngendlela efanele.

Faka i-Chassis Rails

• Nweba i-rack rail yangaphakathi ize ikhiyeke endaweni yayo (1). Shelelisela ngaphandle kuka-chassis ujantshi uze ume (2).
• Susa isitimela se-chassis ngokuslayida ithebhu yokukhulula emhlophe isuke kude nomzila wesitimela wangaphakathi (3), bese udonsa ujantshi we-chassis mahhala (4).
• Ama-chassis rails akhuphuka ohlangothini ngalunye lwesistimu.
• Beka izimbobo zokhiye zesitimela se-chassis phezu kwezigxobo eziseceleni kwe-chassis ukuze izigxobo zidlule emigodini yokhiye, bese uslayida ujantshi ubheke ngemuva kwesistimu kuze kuchofoze ithebhu yensimbi futhi ivikele ujantshi endaweni.
• Vikela isitimela ku-chassis usebenzisa ama-low-pro amathathufile Izikulufo ze-M4. Phinda le nqubo ngakolunye uhlangothi.

Faka Rails Rails

• Ama-rack rails afaka phakathi nendawo ye-2U ephansi yengqikithi ye-4U yesikhala esigciniwe sokubeka.
• Vula futhi uhoxise umzila we-rack wangaphakathi ngaphambi kokuwufaka endaweni yokubeka. Zungezisa i-lever yokukhulula ngemuva kwesitimela esingaphakathi njengoba kukhonjisiwe kulebula yomcibisholo, bese uphusha isitimela sangaphakathi siye ngemuva kwe-asembly ize ime.
• Beka ujantshi endaweni yokubeka ingemuva elingaphambili libheke ngaphambili kwendawo yokubeka. Qondanisa izikhonkwane nezimbobo zokufaka irack yangaphambili. Phusha izikhonkwane emigodini kuze kuchofoze i-latch.
• Ngemuva kwesitimela, qondanisa izikhonkwane nezimbobo zokubeka. Swayiphela isibambo se-latch empunga uye ngaphandle bese usidonsa ukuze unwebe isitimela kuze kube yilapho izikhonkwane zikaloliwe zihlezi ngokugcwele emigodini yokubeka. Dedela i-latch ukuze ukhiye umzila wesitimela endaweni. Phinda inqubo yesitimela se-rack yesibili.
• Qinisekisa ukuthi ojantshi babekwe phakathi nendawo engaphansi engu-2U yesikhala sokubeka. Izikhonkwane ezihamba nge-rack kufanele zibe phakathi kwezimbobo ze-U ngayinye.

Faka Isistimu ku-Rack

Isexwayiso: I-M-Series idinga abantu ababili ukuthi bakhuphule ngokuphephile bangene futhi baphume ku-rack. Ungawafaki amadrayivu uze ukhweze i-M-Series endaweni yokubeka. Susa wonke amadrayivu ngaphambi kokukhipha i-M-Series ku-rack.

• Nweba womabili ama-rack rails angaphakathi aphume ku-rack aze akhiye. Qondanisa ama-chassis rails nama-rack rails, bese uslayida ama-chassis rails phakathi kuze kube yilapho esehlezi ngokugcwele.
• Uma womabili ama-chassis rails evikelekile kumarekhi, phusha ngobumnene i-chassis ize ime phakathi nendawo.
• Slayida amathebhu okukhishwa okuluhlaza okwesibhakabhaka kuzo zombili izintambo ze-chassis ukuya ngaphambili kwesistimu bese uphushela iyunithi endaweni yokubeka.
• Ukuze uqinise iyunithi ku-rack, faka isikulufu eside esingu-M5 embobeni yokugcina endlebeni ngayinye. Imbobo yesikulufu ingemuva kwesicabha esincane endlebeni ngayinye.

Faka ama-Drives

• Izinhlelo ze-TrueNAS zisekela kuphela ama-HDD nama-SSD afanelekayo. Xhumana Nethimba Lezokuthengisa ukuze uthole amadrayivu engeziwe noma ukumiselela.
• Ukwengeza amadrayivu angafaneleki ohlelweni kwenza iwaranti ingasebenzi. Shayela Usekelo uma amadrayivu efakwe ngendlela engafanele emathreyini.
• Beka ithreyi endaweni eyisicaba. Faka i-hard drive ngokuqondanisa izixhumi zedrayivu ngemuva kwethreyi bese ucindezela izimbobo zesikulufu sedrayivu ezikhonkwaneni zethreyi.
• Ama-Baffles agcina ukugeleza komoya okufanele kumasistimu anamathreyi okushayela angaphansi kwama-24. Lapho ufaka idrayivu entsha, faka i-screwdriver ye-flathead ku-baffle groove bese udonsa ngobumnene ukuze ususe i-baffle.
• Indawo ngayinye yokushayela ku-chassis inamalambu ezinkomba ezimbili kwesokudla sethreyi. Ukukhanya okuphezulu kuluhlaza okwesibhakabhaka uma idrayivu isebenza noma isipele esishisayo. Ukukhanya okuphansi kubomvu okuqinile uma kwenzeke iphutha.
• Cindezela inkinobho esiliva kuthreyi yokushayela ukuze uvule i-latch. Slayida ngokucophelela ithreyi endaweni yokushayela kuze kube yilapho uhlangothi lwesokudla lwe-latch luthinta unqenqema lwensimbi olungaphambili lwe-chassis, bese uswayipha kancane i-latch ivalwe ize ichofoze endaweni yayo.

Sincoma ngokuqinile i-oda elijwayelekile lokufakwa kwethreyi yedrayivu ukuze kube lula ukusekela:

• Amadrayivu e-SSD enqolobane yokubhala (W), uma ekhona
• Amadrayivu e-SSD enqolobane yokufunda (R), uma ekhona
• Amadrayivu aqinile noma amadrayivu e-SSD okugcina idatha
• Amathileyi okugcwalisa i-air baffle ukuze agcwalise noma yiziphi izindawo ezisele ezingenalutho

Faka idrayivu yokuqala endaweni ephezulu kwesokunxele. Faka idrayivu elandelayo kwesokudla kweyokuqala. Faka amadrayivu asele kwesokudla kuwo wonke umugqa. Ngemuva kokuthi umugqa usugcwalisiwe, yehla uye emugqeni olandelayo bese uqala futhi ngendawo yesokunxele.

Faka i-Bezel (Uma uthanda)

• Slayidela uhlangothi lwesokudla lwe-bezel ezindaweni zokunamathisela endlebeni yangakwesokudla, bese ucindezela uhlangothi lwesokunxele lwe-bezel ku-latch yendlebe engakwesokunxele ize ikhiyeke.
• Ukuze ususe i-bezel, phusha ithebhu yokukhulula indlebe yesokunxele kude ne-bezel, bese uswayipha i-bezel uyikhiphe.

Ukunwetshwa Kwesitoreji

Qaphela: I-M30 ayikusekeli ukunwetshwa kwesitoreji.

Xhuma Izintambo Zakwa-SAS

• Layisha isixhumi sekhebula se-SAS3 phezulu nembobo ye-SAS ngemuva kohlelo. Qinisekisa ukuthi ithebhu eluhlaza okwesibhakabhaka kukhebula ye-SAS ibheke kwesokudla. Phusha kancane isixhumi embobeni size sichofoze.

Xhuma Amashalofu Okwandisa

• Ukuze usethe i-SAS phakathi kwesistimu yakho ye-TrueNAS namashalofu okunweba, faka ikhebula embobeni yokuqala kusilawuli sokuqala se-TrueNAS ukuya embobeni yokuqala kusilawuli seshelufu sokuqala sokunweba. Amasistimu Okutholakala Okuphezulu (HA) adinga enye ikhebuli ukusuka embobeni yokuqala kusilawuli sesibili se-TrueNAS ukuya embobeni yokuqala kusilawuli seshelufu sokunweba sesibili.
• Asincomi okunye ukulungiselelwa kwekhebula. Xhumana ne-iX Support uma udinga ezinye izindlela zokusebenzisa ikhebula.
• Uma isistimu yakho ye-TrueNAS ine-HA, qalisa kabusha noma i-failover ngemva kokuxhuma izintambo ze-SAS ukuze uvumelanise amadrayivu phakathi kwezilawuli.

Okubalulekile: Uma usetha ukuxhumana kwe-SAS, sicela unamathele ku-ex yezintamboample ngezansi. Ukuxhumanisa amashalofu okunweba kubangela amaphutha ngokungalungile. Ungalokothi ufake ikhebula isilawuli esisodwa se-TrueNAS kuzilawuli ezihlukene eshalofini elilodwa lokunweba.

• Umhlahlandlela ofakwe neShelufu lakho Lokunweba unemiyalelo yokuxhumana kwe-SAS. Ukuze uthole eminye imidwebo, bheka i-TrueNAS SAS Connections Guide (www.truenas.com/docs/hardware/expansionshelves/sasconnections)1.
• I-example ngezansi ikhombisa i-M60 exhunywe kuma-ES60 amabili.

Ukuxhumana

Xhuma Izintambo Zenethiwekhi

• Xhuma izintambo zenethiwekhi ukusuka kuswishi yasendaweni noma inethiwekhi yokuphatha ukuya ku-IPMI ethernet, ixl0, kanye nezimbobo ze-ixl1 kusilawuli ngasinye se-TrueNAS. Bheka isigaba “2.3 Izingxenye Zasemuva Nezimbobo” ekhasini 3 ukuze uthole izindawo zamachweba.
• I-iXsystems ilungiselela kusengaphambili izimbobo zenethiwekhi ekucacisweni kwamakhasimende ngaphambi kokuthunyelwa.

I-Short-Reach (SR) Ukusetha Inethiwekhi ye-NIC

• Uma u-ode ama-NIC okufinyelela okufushane nge-M-Series yakho, ungawasethela manje ukuze uthole inethiwekhi.
• Faka okokusebenza kwe-SR embobeni yokuqala ku-NIC, bese uxhuma ikhebula le-SR ngemuva kwe-SR optics. Kokubili i-optics nekhebuli kuzochofoza futhi kukhiye endaweni lapho kufakwe kahle. Phinda ezimbobeni ezisele.
• Ngemva kokufaka okokubona kanye nezintambo ku-NIC xhuma zombili izintambo kusishintshi sakho senethiwekhi.

Ithiphu: Ukuma kwe-Optics kungahluka kumaswishi ahlukene. Bheka izixhumi ezingaphakathi kwezimbobo ukuze uqondise i-SR optics.

Ukusethwa kwenethiwekhi ye-Ethernet NIC

• Uma u-ode ama-ethernet ama-NIC angama-four nge-M-Series yakho, ungawasethela manje ukuze axhumeke kunethiwekhi.
• Faka izintambo ze-ethernet embobeni ngayinye ku-NIC, bese uxhuma ikhebula ngayinye kusishintshi sakho senethiwekhi.

Xhuma I-Monitor nekhibhodi

• Sincoma ukuxhuma imonitha nekhibhodi kubhuthi yokuqala ukuze ukwazi ukumisa isistimu futhi view i-TrueNAS yokuqala web Ikheli le-IP elibonakalayo.
• Xhuma ikhibhodi bese uqapha kusilawuli esingezansi (Isilawuli 1). Bona isigaba “2.3 Izingxenye Zasemuva Nezimbobo” ukuze uhlonze izimbobo ze-USB ne-VGA.

Xhuma Izintambo Zamandla

• Ungawaxhumi amakhebuli kagesi endaweni yamandla okwamanje. Xhuma intambo yamandla ngemuva kwesiphakeli samandla esisodwa.
• Faka intambo ku-plastic clamp bese ucindezela ithebhu ku-latch ukuze uyikhiye endaweni. Phinda inqubo yokunikezwa kwamandla kwesibili nentambo.
• I-M-Series ivuleka ngokuzenzakalelayo lapho ixhunywe kumandla. Iphinda ivuleke ngokuzenzakalelayo lapho amandla ebuyiselwa ngemva kokuhluleka kwamandla.

Qalisa Isistimu

Isexwayiso

• Isistimu yakho ifakwe i-BIOS ephelele ne-IPMI firmware ngaphandle kwebhokisi.
• UNGATHUTHUKISI i-BIOS yesistimu yakho kanye ne-IPMI firmware.
• Sincoma ukuthi i-IPMI ibe kunethiwekhi ehlukile futhi evikelekile ngaphandle kokufinyelela ku-inthanethi.
• Sicela uxhumane nosekelo uma udinga ukuthuthukisa i-BIOS yesistimu yakho noma i-IPMI firmware.

Ngemva kokuxhuma izintambo zamandla ezindaweni zokuphuma, i-M-Series ivula amandla futhi iqale ku-TrueNAS.

Uma iqalisiwe, ikhonsoli yesistimu ibonisa i-TrueNAS web Ikheli le-UI IP. Ikheli lasesizindeni se-inthanethi lingase lilungiselelwe kusengaphambili ngokweziqondiso zekhasimende noma lakhiwe ngokuzenzakalelayo nge-DHCP. Example:

I web interface yomsebenzisi iku:

• http://192.168.100.231
• https://192.168.100.231

Faka ikheli le-IP esipheqululini kukhompuyutha kunethiwekhi efanayo ukuze ufinyelele web interface yomsebenzisi.
Ukuze uhlonze isilawuli esisebenzayo kusistimu ye-HA, hamba ku-Shell (CORE) noma ku-Linux Shell (SCALE) bese ufaka i-hactl .

Xhuma ku-TrueNAS CORE Enterprise WebUI

Idatha ye-TrueNAS CORE web isixhumi esibonakalayo sisebenzisa imininingwane ezenzakalelayo yokungena okokuqala ngqa:

• Igama lomsebenzisi: impande
• Iphasiwedi: abcd1234

Ngemva kokungena ngemvume, shintsha iphasiwedi ye-akhawunti yezimpande ku-Akhawunti > Abasebenzisi ukuze bakhulise ukuphepha kwesistimu.
Uma unedivayisi engaphezu kweyodwa ye-TrueNAS exhunywe kunethiwekhi, i-mDNS ingaba nokungqubuzana kwamagama.
Ukushintsha igama lomethuleli ku- web I-UI, iya kokuthi Inethiwekhi > Ukucushwa Komhlaba > Igama lomethuleli.

Xhuma ku-TrueNAS SCALE Enterprise WebUI

I-TrueNAS SCALE web isixhumi esibonakalayo sisebenzisa imininingwane ezenzakalelayo yokungena okokuqala ngqa:

• Igama lomsebenzisi: admin
• Iphasiwedi: abcd1234

Ngemva kokungena ngemvume, shintsha iphasiwedi ye-akhawunti yomqondisi kokuthi Izifakazo > Abasebenzisi Bendawo ukuze ukhuphule ukuphepha kwesistimu.
Uma unedivayisi engaphezu kweyodwa ye-TrueNAS exhunywe kunethiwekhi, i-mDNS ingaba nokungqubuzana kwamagama.
Ukushintsha igama lomethuleli ku- web UI, iya kokuthi Inethiwekhi bese uchofoza Izilungiselelo kuwijethi Yokucushwa Kwembulunga yonke.

Ngaphandle Kwebhendi-Ukuphatha

• Ukungena ngemvume okungaphandle kwebhendi kunobufakazi obuhlukene kusukela ku-TrueNAS web esibonakalayo. Ukuqinisekisa kuhleliwe futhi kunamathiselwe ngemuva kwe-chassis ye-TrueNAS. Ukuze uthole imininingwane eyengeziwe, bheka https://www.truenas.com/docs/sb-327 2.
• Ukuze uthole imininingwane eyengeziwe mayelana nokuphuma kokuphathwa kwebhendi, bona umhlahlandlela wokuphatha we-M-Series Out-of-Band-Management: https://www.truenas.com/docs/hardware/mseries/mseriesoobm 3.

Izinsiza Ezengeziwe

• I-TrueNAS Documentation Hub inokucushwa okuphelele kwesofthiwe nemiyalo yokusebenzisa. Chofoza Umhlahlandlela ku-TrueNAS web interface noma uye ngqo ku: https://www.truenas.com/docs 5
• Imihlahlandlela engeziwe yezingxenyekazi zekhompuyutha nama-athikili asesigabeni se-Hardware ye-Documentation Hub's: https://www.truenas.com/docs/hardware 6
• Izithangami Zomphakathi ze-TrueNAS zinikeza amathuba okuxhumana nabanye abasebenzisi be-TrueNAS futhi baxoxe ngokulungiselela kwabo: https://www.truenas.com/community 7

Ixhumana ne-iXsystems

Unezinkinga? Sicela uxhumane ne-iX Support ukuze uqinisekise ukulungiswa okushelelayo.

Indlela Yokuxhumana	Izinketho Zokuxhumana
Web	https://support.ixsystems.com 8
I-imeyili	support@iXsystems.com
Ucingo	UMsombuluko-uLwesihlanu, 6:00AM ukuya ku-6:00PM Isikhathi Esivamile sase-Pacific: • Yamahhala yase-US kuphela: 1-855-473-7449 inketho 2 • Indawo kanye neyamazwe ngamazwe: 1-408-943-4100 inketho 2
Ucingo	Ucingo Ngemva Kwamahora (24×7 Ukusekelwa Kweleveli Yegolide kuphela): • Yamahhala yase-US kuphela: 1-855-499-5131 • Amazwe ngamazwe: 1-408-878-3140 (Kuzosebenza amanani okushaya amazwe ngamazwe)

Oxhumana naye

• Ukusekela: 855-473-7449 noma 1-408-943-4100
• I-imeyili: support@ixsystems.com

Amadokhumenti / Izinsiza

I-TrueNAS M-Series Basic Setup Guide [pdf] Umhlahlandlela Womsebenzisi Umhlahlandlela Wokusetha Okuyisisekelo we-M-Series, uchungechunge lwe-M, Umhlahlandlela Wokusetha Okuyisisekelo, Umhlahlandlela Wokusetha

Izithenjwa

• Imaniwali yosebenzisayo