TRU COMPONENTS TCN4S-24R Dual Display PID Temperature Controllers

Imininingwane:

• Uchungechunge: TCN4S-24R
• Ukunikezwa kwamandla: AC 100-240V
• Ivolumu evumelekiletagububanzi: 85-264V AC/DC
• Ukusetshenziswa kwamandla: Ngaphansi kuka-5W
• Sampisikhathi sokulinda: 250ms
• Ukucaciswa kokokufaka: Thermocouple, RTD, linear voltage, kumbe
  umugqa wamanje
• Lawula okukhiphayo: Okukhiphayo kwe-relay
• Ukudluliselwa: SPST-NO (1c) / SPST-NC (1c)
• Okukhipha i-alamu: Okukhiphayo kwe-Relay
• Uhlobo lokubonisa: I-LED yesibonisi esikabili
• Uhlobo lokulawula: Ukushisisa/Ukupholisa
• I-Hysteresis: 0.1 kuya ku-50°C noma °F
• Ibhendi ye-Proportional (P): 0 kuya ku-999.9%
• Isikhathi Esihlanganisiwe (I): 0 kuya ku-3600s
• Isikhathi sokuphuma (D): 0 kuya ku-3600s
• Umjikelezo wokulawula (T): 1 kuya ku-120s
• Ukusetha kabusha mathupha: Kuyatholakala
• Umjikelezo wempilo yokudlulisa: Imishini - ukusebenza kwezigidi eziyi-10,
  Ugesi - imisebenzi eyi-100,000
• Amandla e-Dielectric: 2000V AC iminithi elingu-1
• Ukudlidliza: 10-55Hz, ampububanzi 0.35 mm
• Ukumelana ne-insulation: Ngaphezu kuka-100MΩ nge-500V DC
• Ukungavikeleki komsindo: ±2kV (phakathi kwetheminali yamandla nokokufaka
  Isikhumulo)
• Ukugcinwa kwememori: Imemori engaguquki igcina idatha noma nini
  amandla acishiwe
• Izinga lokushisa le-ambient: -10 kuya ku-55°C (14 kuya ku-131°F)
• Umswakamo we-ambient: 25 ukuya ku-85% RH (okungafinyeleli)

Imiyalo yokusetshenziswa komkhiqizo

Ukucatshangelwa kokuphepha:

Isexwayiso:

1. Faka amadivaysi angaphumeleli uma usebenzisa iyunithi enemishini
   okungase kubangele ukulimala okubi kakhulu noma ukulahlekelwa okukhulu kwezomnotho.
2. Gwema ukusebenzisa iyunithi ezindaweni ezine
   igesi evuthayo/eqhumayo/ebolayo, umswakama ophezulu, ukukhanya kwelanga,
   ukudlidliza, umthelela, noma usawoti.
3. Faka njalo kuphaneli yedivayisi ngaphambi kokuyisebenzisa.
4. Gwema ukuxhuma, ukulungisa, noma ukuhlola iyunithi ngenkathi
   exhunywe kumthombo wamandla.
5. Hlola ukuxhumana ngaphambi kokufakwa kwezintambo.
6. Ungaliqeqeshi noma uliguqule iyunithi.

Isexwayiso:

1. Sebenzisa izintambo ezifanele zokufaka amandla kanye nokuphumayo kwe-relay
   ukuxhumana ukuvimbela umlilo noma ukungasebenzi.
2. Sebenzisa iyunithi ngaphakathi kokucaciswa okulinganiselwe.
3. Hlanza iyunithi ngendwangu eyomile kuphela; gwema amanzi noma izinto eziphilayo
   izincibilikisi.
4. Gcina umkhiqizo kude namashiphu ensimbi, uthuli, nezinsalela zocingo
   ukuvimbela umonakalo.

Izexwayiso ngesikhathi sokusetshenziswa:

• Qinisekisa ukufakwa okufanele kanye nokuxhumeka kweyunithi njengokusho kwayo
  imanuwali.
• Njalo hlola noma yiziphi izimpawu zokulimala noma ukuguga kwezintambo kanye
  izixhumi.
• Gcina indawo ehlanzekile ezungeze iyunithi ukuze uvimbele
  ukuphazamiseka.

imibuzo ejwayelekile ukubuzwa

• UMB: Ingabe lesi silawuli sezinga lokushisa singasetshenziswa nazo zombili izinhlelo zokushisisa nezokupholisa
  • A: Yebo, lesi silawuli sezinga lokushisa sisekela kokubili ukulawulwa kokushisisa nokupholisa.
• Q: Iliphi ibanga lokushisa elinconywayo le-ambient ukuze kusebenze kahle?
  • A: Ibanga lokushisa elinconywayo le-ambient lingu-10 kuya ku-55°C (14 kuya ku-131°F).
• Q: Ngisetha kanjani kabusha isilawuli mathupha?
  • A: Isilawuli sinenketho yokusetha kabusha mathupha engafinyelelwa ngemenyu yezilungiselelo. Bheka imanuwali yemiyalelo ngezinyathelo ezinemininingwane yokusetha kabusha mathupha.

Ulwazi Lomkhiqizo

Funda futhi uqonde imanuwali yeziqondiso ngaphambi kokusebenzisa umkhiqizo. Ukuze uphephe, funda futhi ulandele ukucatshangelwa kokuphepha okungezansi ngaphambi kokusebenzisa. Ukuze uphephe, funda futhi ulandele okucatshangelwayo okubhalwe encwadini yeziqondiso. Gcina le manuwali yeziqondiso endaweni lapho ungathola khona kalula. Ukucaciswa, ubukhulu, njll kungashintsha ngaphandle kwesaziso sokuthuthukiswa komkhiqizo.

Ukucatshangelwa Kokuphepha

• Bheka konke 'Ukucatshangelwa Kokuphepha' ukuze usebenze ngendlela ephephile futhi efanele ukugwema izingozi.
• uphawu lubonisa ukuqapha ngenxa yezimo ezikhethekile lapho izingozi zingase zenzeke.

Isexwayiso Ukwehluleka ukulandela imiyalelo kungaholela ekulimaleni okubi kakhulu noma ukufa

1. Idivayisi ehluleka ukuphepha kufanele ifakwe uma kusetshenziswa iyunithi enemishini engase ibangele ukulimala okubi kakhulu noma ukulahlekelwa okukhulu komnotho. amadivaysi, njll.) Ukwehluleka ukulandela lo myalelo kungase kubangele ukulimala komuntu siqu, ukulahlekelwa kwezomnotho noma umlilo.
2. Ungayisebenzisi iyunithi endaweni lapho igesi evuthayo/eqhumayo/ebolayo, umswakama ophezulu, ukukhanya kwelanga okuqondile, ukushisa okukhazimulayo, ukudlidliza, umthelela noma usawoti omningi. Ukwehluleka ukulandela lo myalelo kungase kubangele ukuqhuma noma umlilo.
3. Faka kuphaneli yedivayisi ozoyisebenzisa. Ukwehluleka ukulandela lo myalelo kungase kubangele umlilo noma ukushaqeka kukagesi.
4. Ungaxhumeki, ulungise, noma uhlole iyunithi ngenkathi uxhumeke kumthombo wamandla. Ukwehluleka ukulandela lo myalelo kungase kubangele umlilo noma ukushaqeka kukagesi.
5. Hlola 'Ukuxhuma' ngaphambi kwezintambo. Ukwehluleka ukulandela lo myalo kungaholela emlilweni.
6. Ungaliqeqeshi noma uliguqule iyunithi.

Ukwehluleka ukulandela lo myalelo kungase kubangele umlilo noma ukushaqeka kukagesi.

Isexwayiso Ukwehluleka ukulandela imiyalelo kungaholela ekulimaleni noma ekulimaleni komkhiqizo

1. Uma uxhuma okokufaka kwamandla kanye nokuphumayo kwe-relay, sebenzisa ikhebuli engu-AWG 20 (0.50 mm2 ) noma ngaphezulu, bese uqinisa isikulufu setheminali ngetorque eqinisayo engu-0.74 kuya ku-0.90 N m. Uma uxhuma ikhebuli yenzwa neyokuxhumana ngaphandle kwekhebula elizinikele, sebenzisa ikhebuli engu-AWG 28 kuya ku-16 futhi uqinise isikulufu setheminali ngetorque eqinisayo engu-0.74 kuya ku-0.90 N m Ukwehluleka ukulandela lo myalelo kungase kubangele umlilo noma ukungasebenzi ngenxa yokwehluleka ukuxhumana.
2. Sebenzisa iyunithi ngaphakathi kokucaciswa okulinganiselwe. Ukwehluleka ukulandela lo myalelo kungase kubangele umlilo noma umonakalo womkhiqizo
3. Sebenzisa indwangu eyomile ukuhlanza iyunithi, futhi ungasebenzisi amanzi noma i-organic solvent. Ukwehluleka ukulandela lo myalelo kungase kubangele umlilo noma ukushaqeka kukagesi.
4. Gcina umkhiqizo kude ne-chip yensimbi, uthuli, nezinsalela zocingo ezigelezela kuyunithi. Ukwehluleka ukulandela lo myalelo kungase kubangele umlilo noma umonakalo womkhiqizo.

Izixwayiso ngesikhathi sokusetshenziswa

• Landela imiyalelo kokuthi 'Izixwayiso ngesikhathi sokusebenzisa'. Uma kungenjalo, kungase kubangele izingozi ezingalindelekile.
• Hlola i-polarity yamatheminali ngaphambi kokufaka izintambo zenzwa yezinga lokushisa.
• Ngenzwa yethempelesha ye-RTD, yifake ngentambo njengohlobo lwezintambo ezi-3, usebenzisa izintambo ezinogqinsi nobude obufanayo. Ngenzwa yethempelesha ye-thermocouple (TC), sebenzisa intambo yesinxephezelo emisiwe ukuze unwebe intambo.
• Gcina kude nevolumu ephezulutagolayini be-e noma izintambo zikagesi ukuvimbela umsindo ongenisayo. Uma kufakwa ulayini wamandla kanye nolayini wesignali wokufaka eduze, sebenzisa isihlungi somugqa noma i-varistor kulayini wamandla kanye nentambo evikelekile kulayini wesiginali yokufaka. Ungasebenzisi izinto eziseduze ezikhiqiza amandla kazibuthe aqinile noma umsindo wamafrikhwensi aphezulu.
• Faka iswishi yamandla noma i-circuit breaker endaweni efinyeleleka kalula ukuze unikeze noma unqamule amandla.
• Ungayisebenzisi enye iyunithi iyunithi (isb. voltmeter, ammeter), kodwa isilawuli lokushisa.
• Uma ushintsha inzwa yokokufaka, cisha amandla kuqala ngaphambi kokuyishintsha. Ngemva kokushintsha inzwa yokufaka, lungisa inani lepharamitha ehambisanayo.
•  Yenza isikhala esidingekayo ezungeze iyunithi yemisebe yokushisa. Ukuze uthole isilinganiso esinembile sezinga lokushisa, fudumeza iyunithi ngaphezu kwamaminithi angu-20 ngemva kokuvula amandla.
• Qinisekisa ukuthi ukunikezwa kwamandla kagesi voltage ifinyelela ku-voltage elinganiselwetage phakathi kwamasekhondi angu-2 ngemva kokunikeza amandla.
• Ungaxhumi ngezintambo kumatheminali angasetshenziswa.
• Le yunithi ingasetshenziswa ezindaweni ezilandelayo.
  • Ngaphakathi (kwisimo semvelo sikalwe 'Ngezici')
  • I-Altitude Max. 2,000 m
  • Idigri yokungcola 2
  • Isigaba sokufakwa II

Izingxenye Zomkhiqizo

• Umkhiqizo (+ ubakaki)
• Incwadi yeziqondiso

Imininingwane

Uhlobo Lokufaka kanye Nokusetshenziswa Kwebanga

Uhla lwamasethingi lwamanye amapharamitha lunomkhawulo uma usebenzisa isibonisi sephoyinti ledesimali.

Bonisa ukunemba

Izincazelo zeyunithi

1. Ingxenye yesibonisi se-PV (ebomvu)
   • Imodi ye-RUN: Ibonisa i-PV (inani lamanje)
   • Imodi yokusetha: Ibonisa igama lepharamitha
2. Ingxenye yokubonisa ye-SV (eluhlaza)
   • Imodi ye-RUN: Ibonisa i-SV (Inani lokusetha)
   • Imodi yokusetha: Ibonisa inani lokusetha ipharamitha

Inkomba

Ukhiye wokufaka

Amaphutha

Qaphela ukuthi uma kwenzeka iphutha le-HHHH/ LLLL, ukuphuma kokulawula kungase kwenzeke ngokubona okokufaka okuphezulu noma okuncane kuye ngohlobo lokulawula.

Ubukhulu

Ubakaki

Indlela Yokufaka

Ngemva kokukhweza umkhiqizo kuphaneli enobakaki, faka iyunithi kuphaneli, qinisa ubakaki ngokuphusha ngesikrudrayiva se-flathead.

Ukuxhumana

Imininingwane ye-Crimp Terminal

Iyunithi: mm, sebenzisa itheminali yecrimp yomumo olandelayo.

Ukusetha Imodi

Ukusetha kabusha ipharamitha

1. Cindezela u-[◄] + [▲] + [▼] okhiye ngaphezu kwamasekhondi angu-5. kumodi yokuqalisa, i-INIT ivula.
2. Shintsha inani lokusetha njengo-YEBO ngokucindezela izinkinobho [▲], [▼].
3. Cindezela ukhiye we-[MODE] ukuze usethe kabusha wonke amanani epharamitha njengokuzenzakalelayo futhi ubuyele kumodi yokuqalisa.

Ukusetha Ipharamitha

• Amanye amapharamitha ayenziwa asebenze/angasebenzi kuye ngemodeli noma ukulungiselelwa kwamanye amapharamitha. Bheka incazelo yento ngayinye.
•  Uhlu lwezilungiselelo kubakaki elokusebenzisa isibonisi sephoyinti ledesimali ekucacisweni kokufakwayo.
• Uma kungekho okokufaka kokhiye ngaphezu kwamasekhondi angu-30 kupharamitha ngayinye, ibuyela kumodi ye-RUN.
• Uma ucindezela ukhiye we-[MODE] phakathi nesekhondi elingu-1 ngemva kokubuyela kumodi yokusebenza usuka eqenjini lepharamitha, izongena eqenjini lepharamitha ngaphambi kokubuya.
• [MODE] ukhiye: Ilondoloza inani lamanje lesilungiselelo sepharamitha bese ithuthela kupharamitha elandelayo.
  [◄] ukhiye: Ihlola into engashintshi / Ihambisa umugqa lapho ishintsha inani elimisiwe
  [▲], [▼] okhiye: Ikhetha ipharamitha / Ishintsha inani elimisiwe
• Ukulandelana kwezilungiselelo ezinconyiwe: Iqembu lepharamitha 2 → Iqembu lepharamitha 1 → ukulungiselelwa kwe-SV

Ukulahlwa

Lokhu kuvela kunoma isiphi isisetshenziswa sikagesi noma sikagesi esibekwe emakethe ye-EU. Lolu phawu lubonisa ukuthi lo mshini akufanele ulahlwe njengodoti kamasipala ongahlungiwe ekupheleni kwesikhathi sokusebenza kwawo.
Abanikazi be-WEEE (Imfucuza Evela Ezinsizeni zikagesi neze-elekthronikhi) bazoyilahla ngokuhlukana nodoti kamasipala ongahlungiwe. Amabhethri asetshenzisiwe nama-accumulators, angavalwanga yi-WEEE, kanye ne-lampezingase zisuswe ku-WEEE ngendlela engacekeli phansi, kufanele zisuswe abasebenzisi bokugcina ku-WEEE ngendlela engacekeli phansi ngaphambi kokuthi idluliselwe endaweni yokuqoqa.
Abasabalalisi bempahla kagesi neye-elekthronikhi babophezelekile ngokomthetho ukuthi bahlinzeke ngokuthathwa kwemfucuza mahhala. I-Conrad inikeza izinketho ezilandelayo zokubuyisela mahhala (imininingwane eyengeziwe kweyethu webindawo):

• emahhovisi ethu eConrad
• ezindaweni zokuqoqa iConrad
• ezindaweni zokuqoqwa kweziphathimandla zokulawulwa kwemfucuza yomphakathi noma izindawo zokuqoqwa ezibekwe abakhiqizi noma abasabalalisi ngokwencazelo ye-ElektroG

Abasebenzisi bokugcina banesibopho sokususa idatha yomuntu siqu ku-WEEE okufanele ilahlwe. Kufanele kuqashelwe ukuthi izibopho ezihlukene mayelana nokubuyisela noma ukugaywa kabusha kwe-WEEE zingasebenza emazweni angaphandle kweJalimane.

Ipharamitha 1 iqembu

Ipharamitha 2 iqembu

1. Amapharamitha angezansi ayaqaliswa lapho inani lokusetha lishintshwa.
   • Iqembu lepharamitha 1: AL1/2 izinga lokushisa le-alamu
   • Iqembu lepharamitha 2: Ukulungisa okokufaka, umkhawulo we-SV ophezulu/ophansi, i-alamu yokuphuma kwe-alamu, isikhathi se-LBA, ibhendi ye-LBA
   • Imodi yokusetha ye-SV: SV
2. Uma i-SV ingaphansi komkhawulo ophansi noma ingaphezulu komkhawulo ophezulu lapho inani lishintshwa, i-SV ishintshelwa enanini lomkhawulo ophansi/phezulu. Uma ukucaciswa Kokokufaka okungu-2-1 kushintshiwe, inani lishintshelwa ku-Min./Max. inani lokucaciswa kokokufaka.
3. Uma inani lokusetha lishintshwa, inani lokusetha lephutha le-MV engu-2-20 liqaliswa libe ngu-0.0 (OFF).
4. Lapho ushintsha inani ukusuka ku-PID ukuya ku-ONOF, inani ngalinye lepharamitha elandelayo liyashintshwa. 2-19 Ukhiye wokufaka wedijithali: VALIWE, 2-20 Iphutha lenzwa MV: 0.0 (uma ukusetha inani lingaphansi kuka-100.0)

Lokhu kushicilelwe ngu-Conrad Electronic SE, u-Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). Wonke amalungelo kubandakanya ukuhumusha agodliwe. Ukukhiqiza kabusha nganoma iyiphi indlela, isb. ikhophi, ukwenza ifilimu encane, noma ukuthwebula izinhlelo ze-elekthronikhi zokucubungula idatha kudinga imvume ebhaliwe yomhleli kusengaphambili. Ukuphrinta kabusha, nakho ngokwengxenye, akuvunyelwe. Lolu shicilelo lumelela isimo sobuchwepheshe ngesikhathi sokuphrinta. Copyright 2024 by Conrad Electronic SE. *BN3016146 TCN_EN_TCD210225AB_20240417_INST_W

Amadokhumenti / Izinsiza

TRU COMPONENTS TCN4S-24R Dual Display PID Temperature Controllers [pdf] Incwadi Yeziqondiso I-TCN4S-24R Dual Display PID Temperature Controllers, TCN4S-24R, Dual Display PID Temperature Controllers, Display PID Temperature Controllers, PID Temperature Controllers, Temperature Controllers, Controllers

Izithenjwa

• Imaniwali yosebenzisayo