IMANUWALI YENKONZO – MAXIMA CALIPERV
2024_02

ulwazi oluvamile

1. Funda imanyuwali ngokuphelele ngaphambi kokusebenzisa imikhiqizo bese ulandela imiyalelo equkethwe kule miyalo lapho ufaka, usebenzisa futhi unakekela umkhiqizo ukuze ugweme ukulimala komuntu siqu kanye nokulimala kwempahla.
2. Ukufakwa nokunakekelwa kwemikhiqizo ye-Trickstuff kudinga ulwazi oluyisisekelo lokuphatha izingxenye zamabhayisikili futhi kufanele kwenziwe kuphela ochwepheshe bamabhayisikili abaqeqeshiwe. Ngesikhathi sokufakwa noma ukulungiswa, izimo zokusebenza ezihlanzekile kufanele ziqinisekiswe ukuze kugwenywe ukungena kokungcola kumasistimu amabhuleki.
3. Uma noma yimiphi imiyalelo ekule manuwali ingacacile, ungaqhubeki nokuyifaka noma ukuyilungisa. Xhumana nomthengisi wangakini we-Trickstuff noma ithimba losekelo le-Trickstuff.

Ukuphepha

Ukufakwa, ukusetshenziswa kanye nokugcinwa kwemikhiqizo ye-Trickstuff kudinga ukuthi ufunde futhi uqonde lezi ziqondiso zokuphepha ezilandelayo.
1. Iziyalezo zokuphepha ezijwayelekile

• Hlala ulandela imiyalelo ekubhukwana lapho usebenza ngemikhiqizo ye-Trickstuff.
• Sincoma ukusetshenziswa kwamabhuleki e-Trickstuff kuphela imikhiqizo ye-Trickstuff.
• Lapho usebenza ohlelweni, naka izinto zokuzivikela ezifanele ezifana namagilavu ​​nezibuko zokuphepha.
• Imikhiqizo ye-trickstuff kufanele isetshenziswe kuphela ngokuya ngokusetshenziswa okuhlosiwe. Uma kungenjalo umsebenzisi uthatha isibopho.

Isexwayiso!
Ukufakwa, ukusetshenziswa nokugcinwa ngendlela efanele kwezingxenye kubangela ingozi enkulu futhi kungaholela ezingozini ezinokulimala okubi okuhlanganisa nokufa.
2. Amabhuleki nama-brake disc

• Bheka ngokubonakalayo amabhuleki nama-rotor ngaphambi kokugibela ngakunye:
  • Amabhuleki agugile kanye/noma ama-brake discs angaholela ekwehlulekeni kwamabhuleki kungazelelwe.
  • Izinto zokugcoba ezifana namafutha noma amafutha ku-brake pad noma i-brake disc ingakhawulela ukusebenza kwebhuleki.
  • Ukugqwala kungabangela okokusebenza kwe-friction ukuthi kuphume ku-backing plate, okuholela ekuhlulekeni kwamabhuleki. Shintshanisa ama-brake pads akhombisa izimpawu zokugqwala ngokushesha.
  • Ama-brake pads akufanele abe ngaphansi kobukhulu obuncane obungu-0.5mm.
  • Ama-brake disc akumele abonise noma yikuphi ukugoba noma imifantu futhi kufanele afakwe endaweni efanele yokuzungezisa.
  • Ama-brake discs kufanele abe nobukhulu obuncane obungu-1.6mm.
• Uma kwenzeka umonakalo kuma-brake pads kanye/noma ama-brake disc, yeka ukuwasebenzisa ngokushesha bese ufaka ama-brake pads amasha noma ama-brake disc.
• Ama-brake pads angasetshenziswa kuphela nge-caliper ehambisanayo.
• Ngaphambi kokusebenza kuma-brake caliper noma ama-brake disc, qiniseka ukuthi awasashisi nokuthi ama-brake disc awasaphenduki. Ukushisa nokuphenduka kungabangela ukusha, imihuzuko, ukusikeka nokunye ukulimala.
• Lapho ufaka amabhuleki amabhuleki, sebenzisa kuphela isiphethu sephedi sokuqala, ibhawudi egcina i-pad nesiqeshana sokuphepha.
• Hlola ukusebenza kwebhuleki ngemva kokukhwezwa noma ukushintshwa kwama-brake pads kanye/noma ama-brake disc.

3. Amabhuleki
Isexwayiso!
Uma ibhuleki lisetshenziswa uma lishoda lingafadalala bese liholela ezingozini zokulimala kanzima okuhlanganisa nokufa.

• Hlola ibhuleki ngaphambi nangemuva kokusetshenziswa ngakunye kwebhayisikili lakho futhi uhlole umonakalo.
• Uma kunomonakalo noma izimpawu zomonakalo, amabhuleki akumele asetshenziswe. Uma ungabaza, xhumana nomthengisi we-Trickstuff wangakini noma ithimba losekelo le-Trickstuff.
• Uma ibhuleki livuza uwoyela ngaphansi kwengcindezi ephezulu noma ephansi, ungaqhubeki nokugibela futhi uxhumane nethimba labasekeli be-Trickstuff ngokushesha.
• Ibhuleki kufanele lihambisane nazo zonke izingxenye zebhayisikili. Isisindo sesistimu esiphezulu sebhuleki akumele seqiwe.
• Amabhuleki e-Trickstuff mahle kuphela njengomshayeli wendiza owasebenzisayo. Indlela efanele yokubhuleka ibalulekile. Ukubhuleka okungafanele kungaholela ezingozini zokulimala kanzima.
  • Ukubhuleka unomphela kufanele kugwenywe. Uma ubhuleka, ungadonsi ibhuleki kancane, kodwa gqabhuka uma inhlabathi ivuma. Ukufaka ukushisa okuqhubekayo okuvela kubhuleki elidonsa unomphela kungabangela ibhuleki ukuthi lishise, kuvimbele ukubhuleka kungazelelwe futhi ngaleyo ndlela kuholele ezingozini ezimbi kakhulu ezinengcuphe yokulimala. Ngokunjalo, ukubhuleka unomphela ekushintsheni izimo zenhlabathi ezifana netshe eligingqikayo, inhlabathi emanzi, i-loam, amatshe, izimpawu zomgwaqo, njll. kungabangela ukulahlekelwa ukulawula.
  • Ukudonsa kakhulu ibhuleki langaphambili kungaholela ekutheni i-rollover.

Amathuluzi

• TX10 ukhiye
• TX25 ukhiye
• TX30 ukhiye
• Ukhiye we-HEX2.5mm
• I-torque wrench (15Nm)
• I-compressor yomoya (uyazikhethela)
• Ucezu oludala lweshubhu yangaphakathi (uyazikhethela)
• Ilokha yomucu wamandla amaphakathi (isb. i-Loctite 243)
• Amafutha omhlangano (isb. I-Interflon assembly grease)
• I-Toothpick
• Amathawula esitolo

Izinsiza Zesevisi:
Ukusevisa i-brake caliper, i-service kit eyodwa iyadingeka ku-caliper yebhuleki ngayinye (okungukuthi amakhithi amabili esethi eyodwa yamabhuleki).

• Isevisi evamile, ngaphandle kwamapiston: KIT SEALS MXA CALIPER OIL ASM
• Isevisi enwetshiwe ehlanganisa ukushintshaniswa kwamapiston (isb. uma konakele): KIT SEALS & PISTONS MXA CALIPER OIL ASM

Kuphelileview Izixhumi ze-M4-/M5:

	Ikhaladi					Iphampu
Umkhiqizo	C21	C22	C41	C42	MXA	I-DIRETTISSIMA/ MAXIMA	I-PICCOLA
Isixhumi	M5	M4	M5	M4	Iv5	M4	M5

Uzodinga futhi amathuluzi afanele ukususa ibhuleki ebhayisikilini ngokuhambisana nemiyalelo yokusebenza.
Qaphela: Amabhuleki e-Trickstuff aklanyelwe ukusetshenziswa namafutha e-organic, biodegradable Trickstuff "Bionol".
Ungalokothi usebenzise uketshezi lwamabhuleki lwe-DOT (isb. i-DOT4/5/5.1/ njll.), ngaphandle kwalokho ama-seal ohlelo lwamabhuleki azolimala futhi nebhuleki ngeke lisakwazi ukusetshenziswa ngaphandle kokuhlolwa.
Qaphela: Sebenzisa kuphela i-Bionol entsha. I-Bionol ekhishiwe akufanele iphinde isetshenziswe.

I-service brake caliper

Imanuwali yesevisi elandelayo ihlanganisa isevisi yayo yonke i-brake caliper, ukuhlakazwa kwayo kanye nokushintshaniswa kwazo zonke izimpawu.
Ukulungiselela

1. Lungisa ibhayisikili lakho endaweni yokuma yebhayisikili bese wehlisa amasondo.
2. Susa i-brake caliper ebhayisikilini lakho usebenzisa amathuluzi anele.
3. Susa amabhuleki ku-caliper usebenzisa ukhiye we-HEX2.5mm.
4. Faka i-Trickstuff Triple-B-Tool noma isikrufu esingu-8mm ku-disc groove bese umpompa ama-caliper pistons baze bathinte ithuluzi. Lokhu kwenza ukususwa kwama-caliper pistons kube lula kamuva.
5. Sebenzisa i-SW8mm open-end-wrench (ipayipi le-Goodridge) noma ukhiye we-TX25 (ipayipi le-Kevlar) ukuze uhlukanise ipayipi lokubhuleka kukhalipha. Cwilisa amafutha avuzayo ngethawula lesitolo. Lahla ama-O-rings amabili esilinganisweni se-banjo.
   Qaphela: Sicela ulahle izingxenye ezizoshintshwa ngokuvumelana nemihlahlandlela yangakini yokugaywa kabusha.

Ukuhlukaniswa kwe-caliper

1. Khipha ibhawudi elopha usebenzisa ukhiye we-TX10 bese ubuyisela i-O-ring.
2. Susa womabili amabhawodi we-caliper usebenzisa ukhiye we-TX30. Ukuze ugweme ukushelela, zama njengoba kukhonjisiwe ezithombeni ezingezansi.
3. Lahla i-O-ring ye-caliper half seal.
4. Beka ama-halves e-caliper ahlukanisiwe manje ama-piston bores abheke phansi endaweni eyisicaba, okungcono kakhulu ukhuni. Wacindezele phansi phansi futhi usebenzise umoya ocindezelwe ukuze uphushe ama-caliper pistons aphume kuma-caliper half. Sebenzisa i-nozzle yepulasitiki ukuze ugweme ukunwaya ama-caliper half. Okunye ungasebenzisa ucezu oludala lwerubha yangaphakathi enembobo ukuze ugweme ukuthintana phakathi kombhobho wensimbi yakho namabhuleki e-aluminium. Yengeza umoya ocindezelwe ovela ku-M6-bore (isixhumi se-brake hose, uhhafu wangaphakathi), resp. I-M5-bore (isixhumi sokopha). Kwezinye izimo umfutho womoya udinga ukugcinwa imizuzwana embalwa.
   Qaphela: Uma usebenza ngomoya ocindezelweyo, sebenzisa njalo izindlela zokuphepha komuntu siqu njengokuvikela indlebe nezibuko zokuphepha. Uma kwenzeka ungakwazi ukufinyelela i-compressor yomoya, ungasebenzisa ama-pliers ukuze ususe ngokucophelela ama-piston. Le nqubo ilimaza i-piston surface futhi wonke ama-pistons adinga ukushintshwa ngemva kokususwa. Kulokhu, thenga ikhithi ethi "Seals and Pistons".
5. Susa ama-caliper pistons bese ucwilisa amafutha avuzayo ngethawula lesitolo. Bheka ngokubuka ama-caliper pistons akho ngomonakalo ongaphezulu (imihuzuko/izimpawu zamathuluzi/ukuguqulwa) bese uwashintsha uma uwathola alimele.
6. Okulandelayo, susa futhi ulahle ama-K-rings kuma-calipers. Sebenzisa i-toothpick noma ithuluzi elithambile elifanayo ukuze ugweme ukunwaya izindawo zokuvala.7. Hlanza ama-halves e-caliper ngamanzi afudumele kanye nenani elikhululekile loketshezi lokugeza. Isebenza kahle kakhulu uma ihlanganiswe nebhulashi elithambile kanye namanzi amaningi ahlanzekile okugeza ngemva kwalokho. Ngaphambi kokuhlanganisa, qiniseka ukuthi yonke into yomiswe kahle futhi akukho zinsalela zamanzi ezisele. Ungawomisa ama-halves e-caliper ngomoya ocindezelwe noma ngokuwabeka kurediyetha yasendlini isikhathi esithile.

Ukuhlanganiswa kwe-brake caliper

1. Okokuqala faka ama-K-rings. Qaphela ukufaka ama-K-rings angu-17mm kanye no-16mm kubhore efanele ngokulandelana. Gcoba igrisi yokuhlanganisa (isb. I-Interflon Assembly Grease) kuma-K-rings ngaphambi kokufakwa. Inani lamafutha kufanele lifane nenani eliboniswe esithombeni esingezansi.
2. Faka ama-K-rings emiseleni. Bheka izindawo zokuhlala ezifanele nokuthi azisontekile yini.
3. Okulandelayo faka ama-caliper pistons. Zibeke phezu kwebhore ku-K-ring bese uziphendulela ½ ngesandla ukuze ugcobe isiyingi. Bese uwaphusha mathupha aze ame. Uma uhlangabezana nokungezwani okuphezulu, khipha i-piston uphinde uqinisekise indawo yokuhlala efanele yophawu. Bese uqala ukufakwa kwepiston futhi.
4. Susa amafutha amaningi ngethawula lesitolo.
5. Faka i-caliper half seal entsha. Hlola izindawo ezivalekayo ukuze uthole umonakalo nokuhlanzeka.
6. Hlanganisa womabili ama-halves we-caliper bese ufaka ama-M7 caliper bolts ngokhiye we-TX30. Lapho uhlanganisa ama-halves e-caliper, qinisekisa isikhundla esifanele se-caliper half seal.
   Qaphela: Kuyasiza ukuthi uqale ubophe amabhawodi phezulu kancane ukuze uqondanise kahle ama-caliper half. Ungasebenzisa isando sepulasitiki sobuso obuthambile ukuze uzivumelanise futhi wandise i-torque isinyathelo ngesinyathelo. I-torque-down yokugcina yenzeka esinyathelweni esilandelayo.
7. Sebenzisa isikrufu se-torque esilinganisiwe esinokhiye we-TX30 no-15Nm ukuze unciphise amabhawodi e-caliper.
8. Faka ama-O-rings amabili amasha nhlangothi zombili zokufakwa kwe-banjo yakho, bese usebenzisa isikulufu esingenalutho ukuxhuma ipayipi lebhuleki emuva ku-caliper futhi uzilungise. Sebenzisa i-open-end-wrench engu-8mm (ipayipi le-Goodridge) noma ukhiye we-TX25 (ipayipi le-Kevlar) eline-3Nm ukuze uqedele ukufaka.
9. Wopha isistimu yamabhuleki ngokuya ngemanuwali efanele.
10. Faka ama-brake pads kanye ne-pad retaining bolt ngesiqeshana sokuphepha. Faka i-caliper emuva ebhayisikili futhi uyivumelanise kahle nediski.

Izinguquko zobuchwepheshe, amaphutha nokuphrinta okungalungile kukhishiwe.

I-TRICKSTUFF® GMBH
SCHWABENMATTEN 17A
79292 PFAFFENWEILER
EJALIMANE
TECH-SUPPORT@TRICKSTUFF.DE

Amadokhumenti / Izinsiza

TRICKSTUFF C42 Maxima Caliper [pdf] Incwadi Yeziqondiso C42 Maxima Caliper, C42, Maxima Caliper, Caliper

Izithenjwa

• Imaniwali yosebenzisayo