I-SYSTEM SENSOR SPSWLED-BT Series LED Indoor Selectable Output Somlomo Imanuwali Yokufundisa

Imanuwali isetshenziswa namamodeli alandelayo:
Ukuqanjwa kolimi: “-B” zizilimi ezimbili (isiNgisi/isiFulentshi). I-“-BT” iyizilimi ezimbili ezipakishwe ngendandatho yokunquma. “-P” ziyizinguqulo ezicacile (akukho magama); I-"TP" ihlanganiswe kalula nendandatho yokunquma. “-SP” abhalwe ukuthi “FUGUE”.

Isingeniso

Imininingwane Yomkhiqizo

Izinga Lokushisa Elijwayelekile:	32°F ukuya ku-120°F (0°C ukuya ku-49°C)
Ububanzi Bomswakama:	10 kuya ku-93% Ukungafinyeleli
Umq. Ojwayelekiletage (Izikhulumi):	25 Volts noma 70.7 Volts RMS
Maximum Supervisory Voltage	33 VDC
Ibanga Lefrikhwensi yesipika:	400-4000 Hz
Izilungiselelo zamandla:	¼, ½, 1, 2 Watts
I-Strobe Flash Rate:	1 flash ngomzuzwana
Okuzenzakalelayo Voltage (Strobe):	Ilawulwa ngu-24 VDC
I-Operating VoltagUbubanzi (Strobe):	16 kuya ku-33 VDC (24VDC okuzisholo)
I-terminal gauge ye-wire gauge:	12 kuya ku-18 AWG

Ubukhulu kanye nezinketho zokukhweza

Umkhiqizo Ofakwe Odongeni	Ubude	Ububanzi	Ukujula	Izinketho zokukhweza
I-Speaker Strobe (kufaka phakathi ilensi)	6.5 ″ (165.1 mm)	5.00 ″ (127 mm)	2.3 ″ (58.4 mm)	Imikhiqizo Yasendlini Enezintambo Ezingu-2: Izinsimbi Zesipika: SBBSPRL/WL (udonga) 4″ x 4″ x 21/8″ noma ngaphezulu(Lapho usebenzisa i-12 AWG, 14 AWG, wengeza izintambo ezengeziwe ebhokisini, ibhokisi elijulile noma indandatho yokunweba iyanconywa.)
I-Speaker Strobe (kuhlanganise ne-lens) ene-SBBSPRL/WL Surface Mount Back Box	6.62 ″ (168.1 mm)	5.12 ″ (130 mm)	4.55 ″ (115.5 mm)
QAPHELA: I-SBBSPRL/WL Surface Mount Back Box ihloselwe kuphela ama-speaker strobes.

Ceiling Mounted Product	Ububanzi	Ukujula	Izinketho zokukhweza
I-Speaker Strobe (kufaka phakathi ilensi)	6.8 ″ (172.7 mm)	2.33 ″ (59.2 mm)	Imikhiqizo Yasendlini Enezintambo Ezingu-2: Izinsimbi Zesipika: SBBCRL/WL (uphahla) 4″ x 4″ x 21/8″ noma ukujula(Uma usebenzisa i-12 AWG, 14 AWG, noma wengeza izintambo ezengeziwe ebhokisini, ibhokisi elijulile noma indandatho yokunweba iyanconywa.)
I-Speaker Strobe (kufaka phakathi ilensi) ene-SBBCRL/WL Surface Mount Back Box	6.92″ (175.8 mm)	4.83″ (122.7 mm)

ISAZISO: Le manuwali izoshiywa kumnikazi/umsebenzisi walo mshini.

Ngaphambi kokufaka

Sicela ufunde Umhlahlandlela Wohlelo Lokusebenza Lokuphuma Kwezwi Lenzwa Yesistimu, ehlinzeka ngolwazi oluningiliziwe ngamadivaysi esaziso sesipikha, izintambo nezinhlelo zokusebenza ezikhethekile. Amakhophi ale manuwali ayatholakala Kunzwa Yesistimu. Imihlahlandlela ye-NFPA 72 kanye ne-CAN/ULC-524 kufanele ibhekwe. I-System Sensor futhi incoma ukuthi kufakwe izipikha ze-alamu yomlilo ngokuhambisana ne-NFPA 72, NFPA 70, NEC 760, CAN/ULC-524 kanye ne-Canadian Electrical Code.
Okubalulekile: Into esetshenziswayo yesaziso esetshenzisiwe kufanele ihlolwe futhi inakekelwe izimfuneko ze-NFPA 72 ezinhlelweni ze-UL noma i-CAN/ULC-S536 ezinhlelweni ze-ULC.

Incazelo evamile

Uchungechunge lwe-System Sensor lwezinto zikagesi zezaziso lunikeza izinhlobonhlobo zamadivayisi azwakalayo futhi abonakalayo ukuze uthole isaziso se-life safet. Ama-speaker ethu angaphakathi afika namasethingi angu-7 akhethwa nguMandela. Ingxenye ye-strobe yakhelwe ukuthi isetshenziswe kumasistimu we-24VDC. Isipika sakhelwe ukuthi sisetshenziswe ngama-volts angu-25 noma angu-70.7, futhi sisebenze kunoma yiliphi izinga lamandla okufaka amane. Ama-speaker strobe ethu afanele izindawo ezomile. Amadivayisi enzelwe izinhlelo zokusebenza zasendlini futhi agunyazwe ukufakwa odongeni nokufaka isilingi. Le mikhiqizo ihlehle ngogesi ihambisana nesizukulwane sangaphambilini se-System Sensor speaker strobes. Ngokuhlanekezela kwayo okuphansi okuphelele kwe-harmonic, Izipikha ze-System Sensor L-Series zinikeza okuphumayo komsindo othembekile.
I-Speaker Strobes izinto zikagesi zemodi yomphakathi ezihloselwe ukuxwayisa abagibeli ngomcimbi wokuphepha empilweni. Isipikha sifakwe kuhlu lwe-ANSI/UL 1480/ULC 541 (imodi yomphakathi) futhi i-strobe ikuhlu ku-ANSI/UL 1638/ULC 526 (imodi yomphakathi).
Ilensi ye-amber yenzwa yesistimu ISIXWAYISO Izipikha Ama-Strobes izinto zikagesi zemodi eyimfihlo ezihloselwe ukuxwayisa abasebenzi abaqeqeshiwe ukuthi baphenye umcimbi wokuphepha empilweni. Isipikha sifakwe kuhlu lwe-ANSI/UL 1480 (imodi yomphakathi) futhi i-strobe ifakwe ku-ANSI/UL 1638 (imodi yangasese).

Ukucatshangelwa Kwesistimu Ye-alamu Yomlilo

Inzwa Yesistimu incoma ukuthi izinto zikagesi zesaziso sokukhala ngokuhambisana ne-NFPA 70 kanye ne-NFPA 72 (izinhlelo zokusebenza ze-UL) noma i-CAN/ULCS524 (izinhlelo zokusebenza ze-ULC).
Inzwa Yesistimu futhi incoma ukuthi kufakwe izipikha ze-alamu yomlilo ngokuthobela i-NFPA 70, NFPA 72, kanye ne-NEC 760.
(CAN/ULC-S524 kuzinhlelo zokusebenza ze-ULC).

Idizayini Yesistimu

Umklami wesistimu kufanele aqinisekise ukuthi inani eliphelele lamanje elidonswa ngamadivayisi akuluphu alidluli amandla amanje wokuphakelwa kwephaneli, nokuthi idivayisi yokugcina esesekeni isebenza ngaphakathi kwevolthi yayo elinganiselwe.tage. Ulwazi lwamanje lokudwetshwa kokwenza lezi zibalo lungatholakala kumathebula ngaphakathi kwebhukwana. Ukuze kube lula nokunemba, sebenzisa i-voltage-drop calculator Kunzwa Yesistimu webindawo
(www.systemsensor.com).
Lapho ubala ivolumutage itholakala kudivayisi yokugcina, kuyadingeka ukucabangela ivolumutage ngenxa yokumelana nocingo. Uma ucingo lushubile, ivolumu iba mncanetage drop. Amatafula okumelana nezintambo angatholakala ezincwadini zikagesi. Qaphela ukuthi uma izintambo ze-Class A zifakiwe, ubude bezintambo bungase bufike ngokuphindwe kabili njengoba bungaba ngamasekhethi angabekezeleli amaphutha. Ingqikithi yenani lama-strobe ku-NAC eyodwa akumele idonse okwamanje kakhulu kunokusekelwa Iphaneli Yokulawula I-alamu Yomlilo (FACP).

Ukucushwa Kwezinto zikagesi zesaziso

Izilungiselelo ze-Candela ezitholakalayo
I-System Sensor inikezela ngezilungiselelo eziningi ze-candela zezidingo zakho zokuphepha empilweni. Ukuze ukhethe okukhiphayo kwe-candela, vula iswishi ejikelezayo ngemuva komkhiqizo uye kusethingi ye-candela oyifunayo. (Bheka umfanekiso 1.) Ithebula 1 libonisa izinketho ze-candela ezitholakalayo.
Isilungiselelo se-candela singaqinisekiswa kusukela ngaphambili kweyunithi ngokubheka ngefasitela elincane elingaphambili komkhiqizo. (Bona Umfanekiso 17 ukuze uthole indawo yewindi kudivayisi.) Yonke imikhiqizo ihlangabezana ne-pro light outputfiles ecaciswe Emazingeni e-UL afanelekile. (Bheka umfanekiso 2, 3, no-4.)

Umfanekiso 1 Isikhethi seCandela

Umfanekiso 2 Okukhipha Okukhanyayo -Ukuhlakazeka Okuvundlile

Amadigri*	Iphesenti Lesilinganiso
0	100
5-25	90
30-45	75
50	55
55	45
60	40
65	35
70	35
75	30
80	30
85	25
90	25
Hlanganisa 45 kwesokunxele	24
Inhlanganisela engu-45 kwesokudla	24
*Ukubekezelela ±1 degree kuvunyelwe.
A0467-00

Umfanekiso 3 Ukuhlakazeka Okuqondile- Udonga kuya Phansi

Amadigri*	Iphesenti Lesilinganiso
0	100
5-30	90
35	65
40	46
45	34
50	27
55	22
60	18
65	16
70	15
75	13
80	12
85	12
90	12
*Ukubekezelela ±1 degree kuvunyelwe.
A0469-00

Umfanekiso 4 Okukhipha ukukhanya - ukuhlakazeka okuqondile, uphahla oluya ezindongeni kuya phansi

Amadigri*	Iphesenti Lesilinganiso
0	100
5-25	90
30-45	75
50	55
60	45
65	35
70	35
75	30
80	30
85	25
90	25
*Ukubekezelela ±1 degree kuvunyelwe.
A0468-00

Ithebula 1 UL/ULC Maximum Strobe Current Draw (mA)

	Ama-Volts angama-16-33
Candela	DC
15	18
30	22
75	70
95	75
110	85
115	90
135	105
150	110
177	115
185	120
I-FCP*	(ikusasa)
*Iphaneli yokulawula umlilo ye-FCP, ukusetshenziswa kwesikhathi esizayo

Izilinganiso Zamanje Zokudonsa Nokuzwakala

Ku-strobe, umdwebo wamanje wesilungiselelo ngasinye usohlwini kuThebula 1. Ireferensi bi standard kazwelonke evumelanisiwe UL 1480/ULC 541 yezidingo eziyisisekelo zomsindo.

Izilungiselelo Zamandla Ezitholakalayo Ezipikha

I-System Sensor ikunikeza ngebanga elibanzi lezilungiselelo zamandla ezidingweni zakho zokuphepha zempilo, okufaka phakathi i-¼, ½, 1, ne-2W. Idatha yamazinga omsindo nge-UL 1480 ngayinye ingatholakala kuThebula 2.

Ithebula 2 Amazinga Omsindo: Ubuncane Besipika Somsindo We-Strobe Sokusetha Amandla Esiguquli Ngasinye

Ukusetha	Isipikha Strobe (Udonga noma Uphahla) UL Reverberate (dBA @ 10 ft)
¼ W	76
½ W	79
1 W	82
2 W	83

ISEXWAYISO:
Amazinga esignali adlula u-130% olinganiselwe wevolumu yesignalitage kungalimaza isikhulumi. Ngakho-ke, uxhumano lwempompi olungalungile lungabangela umonakalo wesipika. Lokhu kusho ukuthi uma kukhethwa ompompi we-25V uma i-70.7V ampkusetshenziswa i-lifier, kungase kubangele ukulimala kwesipika. Ngakho-ke, qiniseka ukuthi ukhetha ompompi abafanele be- ampi-lifier voltagInhlanganisela yezinga lamandla e-e/input iyasetshenziswa.

Ukuze ubale ukuhlakazeka komsindo nge-UL 1480 ngayinye kanye ne-ULC 541, bheka Ithebula 3.
Ithebula 3 Izici Zokuqondisa (Ibalwe Imikhawulo Yesimo Esibi Kakhulu)

Udonga		Uphahla
I-eksisi Evundlile		I-eksisi Evundlile
I-engeli	Ukulahleka kwe-Decibel (dBA)	I-engeli	Ukulahleka kwe-Decibel (dBA)
0° (ref)	0 (ref)	0° (ref)	0 (ref)
+/- 75	-3	+/- 80	-3
ND	-6	ND	-6
+/- 90	-4.8	+/- 90	-4.3
I-eksisi emile		I-eksisi emile
I-engeli	Ukulahleka kwe-Decibel (dBA)	I-engeli	Ukulahleka kwe-Decibel (dBA)
0° (ref)	0 (ref)	0° (ref)	0 (ref)
+/- 85	-3	+/- 80	-3
ND	-6	ND	-6
+/- 90	-4.3	+/- 90	-4.6

Ukufakwa

Izintambo nokukhweza
Zonke izintambo kufanele zifakwe ngokuthobelana Nekhodi Kagesi Kazwelonke (izinhlelo zokusebenza ze-UL), (i-Canadian Electric Code (izicelo ze-ULC), namakhodi endawo kanye negunya elinegunya. Izintambo akufanele zibe ubude obunjalo noma usayizi wezintambo ezingadala into esebenza ngesaziso ukuze isebenze ngaphandle kwezicaciso zayo ezishicilelwe zingavimbela isistimu ukuthi ixwayise abangaphakathi uma kunesimo esiphuthumayo.

Osayizi bezintambo abafika ku-12 AWG (2.5 mm²) bangasetshenziswa ne-mounting plate. I-mounting plate ihamba namatheminali asethelwe izintambo zenkambu ezingu-12 AWG.

Yenza uxhumo lwezintambo ngokukhumula cishe u-3/8″ wokufakwa kusukela ekugcineni kwentambo yasendle. Bese uslayida ukuphela okungenalutho kocingo ngaphansi kwe-cl efaneleampipuleti futhi uqinise i-clampisikulufu sepuleti. QAPHELA: Ungalukhi izintambo zikagesi ngaphansi kwezikulufu zetheminali. Izintambo ezixhuma idivayisi kuphaneli yokulawula kufanele ziphulwe etheminaleni yocingo ukuze kugcinwe ukugadwa kukagesi.
Bheka Umfanekiso 6 ukuze uthole imininingwane eminingi yokuxhumana kwezintambo; bheka uMdwebo 5 ukuze uthole indawo yamatheminali, intwasahlobo ye-shorting, kanye ne-wire strip guide.

Imidwebo yezintambo

Isici Sentwasahlobo Esifushane. Lawa madivayisi anika amandla ukuhlolwa kokuqhubeka kwesistimu kwezintambo zensimu ngaphambi kokufakwa kwezinto ezisetshenziswayo. I-mounting plate inesiphethu esishodayo phakathi kwamatheminali 2 no-3 azonqamuka ngokuzenzakalelayo lapho umkhiqizo ufakiwe, ukuze kunikwe amandla ukugadwa kwesistimu yokugcina. (Bheka Umfanekiso 5.)

Umdwebo 5 Amatheminali Ezintambo, Intwasahlobo iShorting, kanye ne-Strip Guide

IZIKHUNGO ZOKWENZA IZINGA

1. Okubi (-). Ulayini ungene futhi uphume
2. Okuhle (+). Ulayini ungene futhi uphume
3. Okuhle (+). Ulayini ungene futhi uphume

Umfanekiso 6 Izintambo Zesistimu

Amatheminali ezintambo:

1. Okubi (-). Ulayini ungene futhi uphume
2. Okuhle (+). Ulayini ungene futhi uphume
3. Okuhle (+). Ulayini ungene futhi uphume

Umfanekiso 7 Isipika Wattage kanye VoltagIzilungiselelo

Faka I-Back Box

1. Namathisela ibhokisi elingemuva odongeni noma kusilingi.
   • Amabhokisi okuhlanganisa abekwe ngokulandela izinga lomkhakha. (Bheka umfanekiso 8 no-10.)
   • Amabhokisi okukhweza angemuva angase avikelwe ngokuqondile odongeni noma kusilingi. Ukusebenzisa ubakaki waphansi onesikulufu somhlabathi uyazikhethela. (Bheka umfanekiso 9 no-11.)
   • Inothi lokubeka indawo: Amabhokisi odonga lokukhweza emuva: Khuphuka ngomcibisholo obheke phezulu. (Bheka umfanekiso 14.)
   • Inothi lokubeka indawo: Amabhokisi angemuva okufakwa osilingini: Ibhokisi lokukhweza emuva kwesilingi I-SBBCR/WL iyibhokisi elingemuva elivamile lama-ceiling horn strobes, ama-chime strobe, ama-strobe, izipikha, nama-speaker strobes. Sebenzisa izimbobo zokukhweza eziphezulu (SPK) zesipika sikasilingi kanye nemikhiqizo ye-strobe yesipika. Sebenzisa izimbobo ezifakwa phansi (i-STR) ukuze uthole i-ceiling horn strobe, i-chime strobe kanye nezidingo zokufakwa kwe-strobe. (Bheka Umfanekiso 13.)
2. Khetha ama-knockouts afanelekile futhi uvule njengoba kudingeka.
   • Izimbobo zokungqongqoza ezinezintambo zihlinzekwa ezinhlangothini zebhokisi ze-adaptha ye-conduit engu-¾ iyintshi no-½ iyintshi. Izimbobo ze-Knockout ezingemuva kwebhokisi zingasetshenziselwa ukungena okungu-¾ iyintshi no-½ iyintshi ngemuva.
   • Uma usebenzisa i-¾ inch knockout: Ukuze ususe i-¾ inch knockout, beka i-blade ye-screwdriver enekhanda eliyisicaba emphethweni ongaphandle futhi usebenze indlela yakho uzungeze i-knockout njengoba ushaya i-screwdriver. (Bheka umfanekiso 15a.)
     QAPHELA: Qaphela ukuthi ungashayi i-knockout eduze konqenqema lwebhokisi lokukhweza elingaphezulu.
   • Imigwaqo yomjaho i-V500 kanye ne-V700 nayo ihlinzekwa. Sebenzisa i-V500 ukuthola iphrofayili ephansifile izicelo kanye ne-V700 ye-high profile izicelo.
     Ukuze ususe i-knockout, phakamisa amapulangwe. (Bheka umfanekiso 15b.)

Faka I-Mounting Plate kanye Nomshini Kagesi

1. Namathisela i-mounting plate usebenzisa izikulufu zekhanda ze-Philips. Ibhokisi lokuhlanganisa lisebenzisa izikulufu ezi-2. Ibhokisi lokukhweza elingemuva lisebenzisa izikulufu ezi-4. (Bheka iMifanekiso 8-11.)
2. Xhuma izintambo zenkambu ngokuya ngezimpawu zetheminali. (Bheka umfanekiso 6.)
3. Uma umkhiqizo akufanele ufakwe kuleli phuzu, sebenzisa isembozo sothuli esivikelayo ukuze uvimbele ukungcoliswa kwamatheminali ezintambo ku-mounting plate.
4. Ukunamathisela umkhiqizo ku-mounting plate:
   • Susa isembozo sothuli esivikelayo.
   • Huka amathebhu phezulu kwendlu yomkhiqizo ku-grooves ku-mounting plate.
   • Jikisa umkhiqizo endaweni ukuze ubandakanye amatheminali ku-mounting plate. Qiniseka ukuthi amathebhu angemuva kwendlu yomkhiqizo asebenzisana ngokugcwele ne-mounting plate.
   • Bamba umkhiqizo endaweni eyodwa ngesandla esisodwa, futhi uvikele umkhiqizo ngokuqinisa isikulufu esisodwa esingaphambili kwendlu yomkhiqizo.

ISEXWAYISO:
Izifinyezo "zokubamba endaweni" azihloselwe ukuvikela umkhiqizo ebhokisini elingemuva. Umkhiqizo kufanele uvikelwe ebhokisini elingemuva usebenzisa izikulufu ezinikeziwe

ISEXWAYISO:
Ukuqedwa kwefekthri akufanele kushintshwe: Ungapendi!

ISEXWAYISO:
Ungaqinisi kakhulu izikulufu zamapuleti okufakwayo; lokhu kungase kubangele ukuba i-mounting plate iguquke.

Susa Isisetshenziswa Semodeli Yasesilingini

Amamodeli osilingi kuphela: Ukuze ukhiphe umkhiqizo ku-mounting plate, khulula isikulufu esifakwayo sokufakwayo bese ucindezela inkinobho yokukhiya. (Bheka Umfanekiso 12.)

Ukukhweza Imidwebo

Umfanekiso 8 Ukukhweza Idivayisi Yodonga (Ibhokisi lezigelekeqe ezimbili)

Umfanekiso we-9 Ofaka Idivayisi Yodonga (SBBRL/SBBWL)

 Umfanekiso 10 Ukukhweza Idivayisi Yesilingi (Double-Gang Box)

Umfanekiso we-11 Ukukhweza Idivayisi Yesilingi (SBBCRL/SBBCWL)

Umfanekiso 12 Idivayisi Yesilingi - Indawo Yenkinobho Yokukhiya

Umfanekiso 13 Ukukhetha indawo yesikulufu ekufakweni kosilingi kwebhokisi elingemuva lokukhweza phezulu

1. Amadivayisi esipikha akhwezwa endaweni abhalwe ukuthi “SPK
   

Umfanekiso 14 Umcibisholo Wokukhuphukela Emuva Ibhokisi “Phezulu”

Umfanekiso 15 Knockout kanye nokususwa kwe-V500/V700 kwe-Surface Mount Back Box

Umfanekiso 15A Usayizi we-Knockout

Umfanekiso 15B Ukususwa Kwesikhunta Sentambo

QAPHELA: Qaphela ukuze ungashayi i-knockout eduze nomkhawulo ongaphezulu wenguqulo yodonga lwebhokisi lokukhweza elingemuva.

Tamper Isikulufu

Okwe tampukuphikiswa, isikulufu esijwayelekile sokuthunjwa singase sithathelwe indawo isikulufa se-Torx, esi-odwe ngokuhlukile.
Ukuze ususe isikulufu esibanjiwe, khipha isikulufu emuva bese ucindezela ngemuva kwesikulufu size sinqamuke endlini. Faka esikhundleni nge-Torx screw. (Bheka Umfanekiso 16.)
Umfanekiso 16 Tamper Isikulufu

Amaphuzu Wokuhlola

I-System Sensor L-Series enezisetshenziswa zezaziso ze-LED iza namaphoyinti okuhlola ukuze ufinyeleleke kalula ngokusebenzisa i-digital vol.tagImitha ye-e yokulinganisa umthamo wedivayisitage ngaphandle kokukhipha odongeni noma ophahleni.

1. Faka ivolumu yedijithalitagi-e meter probe ibe (+) endaweni yokuhlola.
2. Faka ivolumu yedijithalitagi-e meter probe ibe (-) endaweni yokuhlola.
   QAPHELA: Ukumaka kubonisa i-polarity yesignali uma isifunda sisebenza.

ISEXWAYISO:
Ukujikeleza okufushane kwalawa maphuzu okuhlola kungase kubangele ukusebenza kwedivayisi okungalungile

Indawo Yezindawo Zokuhlola Ezingu-17

ISEXWAYISO

IMIKHAWULO YABAKHULUMI

Ngaso sonke isikhathi qiniseka ukuthi izikhulumi ngazinye ziyahlolwa ngemva kokufakwa ngokwemithetho ye-NFPA. Izikhulumi zingase zingezwakali. Umsindo wesipika uhlangabezana (noma weqa) amazinga amanje e-Underwriters Laboratories.
Nokho, isikhulumi singase singamazisi umuntu ongalali kahle noma osanda kusebenzisa izidakamizwa noma ophuze utshwala. Isipikha singase singazwakali uma sibekwe endaweni ehlukile kunomuntu osengozini noma uma sibekwe kude kakhulu ukuze sizwakale ngomsindo okhona onjengethrafikhi, ama-air conditioner, imishini noma izinto ezisetshenziswayo zomculo ezingase zivimbele abantu abaqaphile ukuthi bangezwa. i-alamu. Isikhulumi singase singalalelwa abantu abangezwa kahle.

ISEXWAYISO

IMIKHAWULO YE-STROBES

I-strobe ngeke isebenze ngaphandle kwamandla. I-strobe ithola amandla ayo kuphaneli yomlilo/yokuvikela eqapha isistimu ye-alamu. Uma amandla enqanyulwa nganoma yisiphi isizathu, i-strobe ngeke inikeze umsindo owuthandayo noma isixwayiso esibonakalayo.
I-signal strobe ingase ingabonakali. Isignali eyisixwayiso esibonakalayo ye-elekthronikhi isebenzisa ama-LED anesistimu yelensi ehlobene. Ibaneka okungenani kanye ngomzuzwana. I-strobe akumele ifakwe elangeni eliqondile noma ezindaweni ezinokukhanya okuphezulu (ngaphezu kwamakhandlela angamamitha angama-60) lapho ukukhanya okubonakalayo kungase kunganakwa noma kungabonakali. I-strobe ingase ingabonwa abangaboni kahle.

Isignali strobe ingase ibangele ukuquleka. Abantu abanempendulo ye-phototropic eyakhayo ekushukumiseni okubonakalayo nokuquleka, njengabantu abanesifo sokuwa, kufanele bagweme ukuchayeka isikhathi eside ezindaweni lapho amasiginali we-strobe, okuhlanganisa nale strobe, esebenza khona.

I-signal strobe ayikwazi ukusebenza kusukela kuzimpahla zamandla ezinekhodi. Izinsiza zamandla ezinekhodi zikhiqiza amandla aphazamisekile. I-strobe kumele ibe nomthombo wamandla ongaphazamiseki ukuze isebenze kahle. I-System Sensor incoma ukuthi i-horn ne-signal strobe zihlale zisetshenziswa ndawonye ukuze kuncishiswe ubungozi kunoma yikuphi ukulinganiselwa okungenhla.

Isitatimende se-FCC

Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

Le mishini yedijithali Yekilasi B ithobelana ne-Canadian ICES-003.

Lolu phawu (oluboniswe kwesobunxele) emkhiqizweni kanye/noma amadokhumenti ahambisana nawo lusho ukuthi imikhiqizo kagesi neye-elekthronikhi esetshenzisiwe akufanele ihlanganiswe nemfucuza yasendlini. Ukuze uthole ukwelashwa okufanele, ukululama kanye nokugaywa kabusha, xhumana neziphathimandla zendawo noma umdayisi bese ucela indlela efanele yokulahla.

Izinto zikagesi neze-elekthronikhi ziqukethe izinto, izingxenye kanye nezinto ezingaba yingozi emvelweni futhi zibe yingozi empilweni yomuntu uma ukungcola kwezinto zikagesi neze-elekthronikhi (WEEE) kungalahlwanga ngendlela efanele.

Ulwazi Olwengeziwe

Ukuze uthole ulwazi lwakamuva Lwewaranti, sicela uye ku:
http://www.systemsensor.com/en-us/Documents/E56-4000.pdf

Ukuze uthole imikhawulo ye-Fire Alamu Systems, sicela uye ku:
http://www.systemsensor.com/en-us/Documents/I56-1558.pdf

Izikhulumi kuphela: Ukuze uthole Ulwazi Lwakamuva Olubalulekile Lomhlangano, sicela uye ku:
http://www.systemsensor.com/en-us/Documents/I56-6556.pdf

Ulwazi Lwewaranti

Imikhawulo ye
Fire Alamu Systems

Izipikha Kuphela:
Imininingwane Yomhlangano

I-System Sensor° wuphawu lokuthengisa olubhalisiwe lwe-Honeywell International, Inc.
©2024 Inzwa Yesistimu.

Amadokhumenti / Izinsiza

I-SYSTEM SENSOR SPSWLED-BT Series LED Indoor Selectable Output So speaker Strobes [pdf] Incwadi Yeziqondiso SPSRLED, SPSRLED-B, SPSRLED-BT, SPSWLED, SPSWLED-B, SPSWLED-BT, SPSRLED-P, SPSWLED-P, SPSRLED-SP, SPSWLED-CLR-ALERT, SPSCRLED, SPSCRLED-B, SPSCRLED-BT, SPSCWLED, SPSCWLED-B, SPSCWLED-P, SPSCWLED-SP, SPSCWLED-BT, SPSCWLED-T, SPSCWLED-TP, SPSCWLED-CLR-ALERT, SPSWLED-BT Series LED Indoor Selectable Output Sopikha Strobes, LED Indoor Selectable Output Sopikha Strobes, Okuphumayo Okukhethekayo Ama-Strobes wesipikha, ama-Strobe wesipikha esiphumayo, ama-Strobes wesipikha, ama-Strobes

Izithenjwa

• Imaniwali yosebenzisayo