Ukufakwa Kwezindawo Zokuhlala ze-PVS6
Quick Start Guide

PVS6 Residential Monitoring System

Landela le miyalo ukuze ufake futhi uthumele i-PV Supervisor 6 (PVS6) ukuze uthole idatha yokuqapha. Bheka Umhlahlandlela Wokufaka we-Equinox (518101) ukuze uthole imiyalelo ephelele yokufaka isistimu ye-Equinox.
Ukusetshenziswa okuhlosiwe: I-PVS6 iyidivayisi ye-datalogger-gateway esetshenziselwa isistimu yelanga nokuqapha ekhaya, ukulinganisa, nokulawula.
Ikhithi ihlanganisa:

• I-PV Supervisor 6 (PVS6)
• Ukubeka phezulu ubakaki
• (2) Izikulufu
• (2) Izimbobo zokuxhuma
• (2) 100 A Ama-Transformer Amanje (ahanjiswa ngokwehlukana)

Uzodinga: 

• Phillips kanye ne-screwdriver encane ye-flathead
• Izingxenyekazi zekhompyutha ezisekela u-6.8 kg (15 Ibs) ukuze kufakwe ubakaki
• Ithuluzi le-crimp le-RJ45
• I-wire cutter ne-stripper
• Isinyathelo sokuprakthiza (Uma uthanda)
• Ikhompyutha ephathekayo enenguqulo yakamuva ye-Chrome noma yeFirefox efakiwe
• Ikhebula le-Ethernet
• Ukuqapha kwakho kwe-SunPower webimininingwane yesayithi
• (Ongakukhetha) Inethiwekhi ye-WiFi yekhasimende kanye nephasiwedi

Intambo yomzila nekhebuli: 

• Gcwalisa zonke izimbobo endaweni ebiyelwe ngezingxenye ezilinganiselwe ngohlobo 4 lwe-NEMA noma kangcono ukuze ugcine ubuqotho besistimu yendawo ebiyelwe.
• Geza izintuba ezengeziwe nge-drill yesinyathelo (ungasebenzisi i-screwdriver noma isando).
• Sebenzisa kuphela izimbobo ezinikeziwe zepayipi noma izindawo zokubhoboza futhi ungalokothi usike izimbobo phezulu noma emaceleni wendawo ebiyelwe.
• Ungalokothi usebenzise i-inverter noma ikhebuli yokuxhumana ye-Ethernet kumgudu ofanayo nezintambo ze-AC.
• Izintambo ze-CT ne-AC zingase zisetshenziswe epayipini elifanayo.
• Ubuningi. Usayizi ovunyelwe wepayipi we-PVS6 ngu-3/4″.

Okokufaka
208 VAC (LL) CAT III 50/60 Hz, 0.2 A, 35 W;
OR
240 VAC (LL) kusukela kusistimu yezintambo ezintathu zesigaba sokuhlukaniswa CAT III, 50/60 Hz, 0.2 A, 35 W.

Izilinganiso Zemvelo
Ukungcola iDegree 2; -30°C kuya ku-+60°C izinga lokushisa lendawo yokusebenza;15-95% umswakama ongajiki; ubuningi. ukuphakama - 2000 m; ukusetshenziswa kwangaphandle; Thayipha 3R ebiyelwe.
1. Faka i-PVS6

1. Khetha indawo yokufaka engekho elangeni eliqondile.
2. Khipha ubakaki we-PVS6 odongeni usebenzisa izingxenyekazi zekhompyutha ezifanele endaweni ekhwezwayo engasekela okungenani u-6.8 kg (15 Ibs).
3. Faka i-PVS6 kubakaki kuze kube yilapho izimbobo zokukhweza ezansi seziqondanisiwe.
4. Sebenzisa i-screwdriver ukuze uvikele i-PVS6 kubakaki usebenzisa izikulufu ezinikeziwe. Ungaqinisi kakhulu.

2. Faka intambo amandla e-PVS6
Ingozi! Ivolumu eyingozitages! Ungaluniki amandla uhlelo uze uqede Izigaba 1 ukuya ku-3. Ukungena ohlelweni kuhilela ukuthintana okungenzeka kube nevolthi ebulalayo.tages kanye nemisinga. Akukho mzamo wokufinyelela, ukufaka, ukulungisa, ukulungisa, noma ukuhlola uhlelo okufanele wenziwe yinoma ubani ongafaneleki ukusebenza kuleyo mishini. Sebenzisa izikhondatha zethusi kuphela, nge-min. Izinga lokushisa elingu-75°C. ukukala.

1. Sebenzisa i-screwdriver—ungasebenzisi amathuluzi kagesi—ukulungiselela i-PVS6 yezintambo ze-AC:
   • Usebenzisa i-screwdriver ene-flat-blade, goba ngokucophelela ithebhu yokugcina ikhava ye-PVS6 ukuze uyikhulule bese ukhipha ikhava yangaphandle.
   • Khipha ikhava yezintambo ze-AC engezansi
   • Khipha ikhava yezintambo ze-AC ephezulu
2. Qalisa ipayipi lamandla ukusuka kuphaneli yesevisi uye ku-PVS6. Uma usebenzisa izintuba zangemuva zamapayipi, vala izimbobo ezingaphansi kwendawo ebiyelwe ngamapulaki embobo afakiwe. Sebenzisa i-step drill uma usebenzisa izindawo zokungena ezingemuva noma ezimaphakathi.
3. Xhuma i-PVS6 ku-15 A (ene-14 AWG) noma i-20 A (ene-12 AWG) I-UL Esohlwini lwe-UL ezihlukaniselwe izigxobo ezimbili ezizinikele.
   Qaphela: Kumamojula e-AC, lesi sinqamuli kufanele sibe kuphaneli yesevisi efanayo equkethe amasekhethi okukhiphayo wemojula ye-AC.
4. Hlikihla izintambo zibe ngu-12 mm futhi zihlale ngokuhambisana namalebula anamibalabala (intambo emnyama iye ku-Ll, intambo ebomvu iye ku-L2, intambo emhlophe iye ku-N, futhi intambo eluhlaza ibe yi-GND) kumatheminali e-J2 ngezansi kwesokunxele sebhodi le-PVS6, futhi bese uvala i-lever yokukhiya ngayinye ngokuphelele.

3. Faka futhi ufake ucingo kuma-CTs okusetshenziswayo
Ingozi! Ivolumu eyingozitages! Ungaluniki amandla uhlelo uze uqede Izigaba 1 ukuya ku-3. Ukungena ohlelweni kuhilela ukuthintana okungenzeka kube nevolthi ebulalayo.tages kanye nemisinga. Akukho mzamo wokufinyelela, ukufaka, ukulungisa, ukulungisa, noma ukuhlola uhlelo okufanele wenziwe yinoma ubani ongafaneleki ukusebenza kuleyo mishini.
Ubukhulu. Isigaba sokuhlukaniswa kwe-VAC esingu-120/240, isistimu enezintambo ezintathu, Isigaba Sokulinganisa III, 0.333 VAC kusukela kunzwa yamanje ikalwe ukuze kukale ubuningi. 50 A.

Ama-CT anikezwe yi-SunPower alungele ukusetshenziswa kumakhondaktha angu-200 A. Ama-CTs angase alebulwe ngokuthi “100 A” kodwa lesi isilinganiso sereferensi yokulinganisa kuphela. Ungafaka ama-CTs ekucushweni okuhambisanayo noma okuyinqwaba. Bheka Imiyalo Yokufakwa Kwemitha Yokusetshenziswa kwe-CT.

1. Vala wonke amandla kuphaneli yesevisi enkulu ofaka kuyo ama-CTs.
2. Beka ama-CTs kuphaneli yesevisi enkulu, eduze kwamakhondaktha wesevisi angenayo, ngohlangothi olubhalwe ukuthi THIS SIDE TOWARD SOURCE ngasemitha yokusetshenziswa futhi kude nemithwalo. Ungalokothi ufake ama-CTs esigabeni esiqokelwe ukusetshenziswa sephaneli yesevisi.
   • Beka i-Ll CT (izintambo ezimnyama nezimhlophe) eduze kwekhondakta yesevisi kaLayini 1 engenayo
   • Beka i-L2 CT (izintambo ezibomvu nezimhlophe) eduze kwekhondakta yesevisi kaLayini 2 engenayo
3. Qondanisa izingcezu eziyinhloko zensimbi bese uvala ama-CTs.
4. Izintambo ze-CT zomzila ngomsele oya ku-PVS6.
   • Izintambo ze-CT ezisebenzayo: Ungasebenzisa izintambo ze-CT ne-AC kumsele ofanayo. Ungazisebenzisi izintambo ze-CT nezintambo zokuxhumana ze-inthanethi epayipini elifanayo.
   • Ukunweba imikhondo ye-CT: Sebenzisa Ikilasi 1 (600 V okulinganiselwe ubuncane, 16 AWG esiphezulu) ikhebula lensimbi esontekile nezixhumi ezifanele; I-SunPower incoma ukuthi kusetshenziswe izixhumi zokufudumeza ezifakwe i-silicone (IDC) noma ama-telecom crimps; ungasebenzisi izintambo zikagesi (ngokwesiboneloample, THWN noma i-Romex) ukunweba imikhondo ye-CT.
5. Izintambo zeLand L1 CT kanye ne-L2 CT ku-CONS L1 ehambisanayo kanye ne-CONS L2 kumatheminali e-J3 ngezansi, namatheminali angakwesokudla ebhodi le-PVS6. Qinisa ku-0.5-0.6 Nm (4.4-5.3 ku-lb). Uma ufinyeza umkhondo, hlubula ungabi ngaphezu kuka-7 mm (7/25″). Isexwayiso! Ungawaqinisi kakhulu amatheminali.

4. Qinisekisa i-CT voltage izigaba

1. Vula amandla ku-PVS6.
2. Sebenzisa i-voltmeter ukukala ivolumutage phakathi kwetheminali ye-PVS6 L1 kanye nekhondatha yesevisi ye-L1 engenayo kuphaneli yesevisi enkulu ene-L1 CT endaweni.
3. Uma i-voltmeter ifundeka kanje:
   • 0 (zero) V izigaba ziqondaniswe ngendlela efanele.
   • 240 V izigaba aziqondanisiwe ngokungalungile. Hambisa i-CT kwenye i-conductor yesevisi engenayo bese uhlola kabusha ukuze uqinisekise uziro V.
4. Phinda Izinyathelo 4.2 no-4.3 ze-L2.

5. Xhuma ukuxhumana kwesistimu

1. Shintshanisa ikhava yezintambo ze-AC ephezulu.
2. Miselela ikhava yezintambo ze-AC engezansi phezu kwezintambo zamandla ze-AC (ngakwesokunxele uma ugijima embobeni engakwesokunxele; ngakwesokudla uma udlule embobeni engakwesokudla).
3. Qalisa umzila wokuxhumana uye ekuvulekeni komsele we-PVS6 uma kudingeka. Uma usebenzisa izintuba zangemuva zamapayipi, vala izimbobo ezingaphansi kwendawo ebiyelwe ngamapulaki embobo afakiwe.
   Isexwayiso! Ungalokothi usebenzise ikhebuli yokuxhumana ye-inverter kumsele ofanayo njengezintambo ze-AC.
4. Xhuma ukuxhumana kwedivayisi ngayinye usebenzisa imbobo ehambisanayo:
   • Amamojula e-AC: Qinisekisa ukuthi uxhume amamojula e-AC kuphaneli encane yemojuli ye-AC. Alukho uxhumano olwengeziwe oludingekayo, i-PVS6 ixhumana namamojula e-AC isebenzisa iphrothokholi ye-PLC.
   • I-inverter ye-SMA US-22: Xhuma ikhebuli yokuxhumana ye-RS-485 kusukela embotsheni ye-PVS6 RS-485 2-WIRE (eluhlaza okwesibhakabhaka) ukuya kusiguquli sokuqala (noma kuphela) kuchungechunge lwedaisy. Landela imiyalelo yomkhiqizi kuma-inverter engeziwe e-SMA US-22.
   • I-inverter ye-SMA US-40: Xhuma ikhebula le-Ethernet elihloliwe kusukela embotsheni ye-PVS6 LAN1 ukuya kuqala (noma kuphela) i-SMA US-40 port A noma B. Landela imiyalelo yomkhiqizi ukuze uthole iziguquli ezengeziwe ze-SMA US-40 usebenzisa izintambo ze-Ethernet.

6. Xhuma i-PVS6 ku-inthanethi
Xhuma ku-inthanethi yekhasimende usebenzisa noma yikuphi:

• Intambo ye-Ethernet: isuka ku-PVS6 LAN2 iye kumzila wekhasimende (indlela enconyiwe)
• Inethiwekhi ye-WiFi yekhasimende: xhuma ngesikhathi sekhomishini usebenzisa igama lenethiwekhi ye-WiFi yekhasimende nephasiwedi

7. Ikhomishini nge-PVS Management App

1. Vala i-WiFi yekhompuyutha ephathekayo.
2. Sebenzisa intambo ye-Ethernet ukuxhuma ikhompuyutha ephathekayo yakho ku-PVS6 noma isiguquli esisuselwe ohlotsheni lokufaka:
   • Imojuli ye-AC noma i-SMA US-22: Xhuma ikhompuyutha ephathekayo ku-PVS6 LAN 1 port.
   • I-inverter ye-SMA US-40: Xhuma ikhompuyutha ephathekayo embobeni yokuxhumana etholakalayo (A noma B) kusiguquli sokugcina (kuphela).
3. Vula isiphequluli (inguqulo yakamuva ye-Chrome noma iFirefox) bese uthayipha www.sunpowerconsole.com.
4. Landela imiyalo esesikrinini yohlelo Lokuphatha lwe-PVS.
5. Miselela isembozo se-PVS6 esivalekile ngokusihlwitha endaweni.

Uma okokusebenza kusetshenziswe ngendlela engashiwongo i-SunPower, ukuvikelwa okuhlinzekwa yimpahla kungase konakaliswe.

Ukuphepha Nezitifiketi

Imiyalo yokuphepha
Ukufakwa kanye nenkonzo yasensimini kufanele kwenziwe kuphela ngabasebenzi abaqeqeshiwe, abaqeqeshiwe abanamakhono adingekayo nolwazi lokusebenza kulolu hlobo lwedivayisi kagesi. Inkonzo yasensimini ilinganiselwe ezingxenyeni eziqukethwe engxenyeni engezansi ye-PVS6.

• Yenza konke ukufakwa kukagesi ngokuhambisana nanoma imaphi amakhodi kazwelonke nawendawo, njenge-National Electrical Code (NEC) ANSI/NFPA 70.
• Le ndawo ebiyelwe ifanele ukusetshenziswa ngaphakathi noma ngaphandle (NEMA Type 3R). I-ambient esebenzayo isuka ku-30°C iye ku-60°C.
• Ngaphambi kokuxhuma amandla, i-PVS6 kufanele igxunyekwe ngokuvikelekile odongeni lwangaphakathi noma ngaphandle ngokulandela imiyalelo ekule dokhumenti.
• Ngokuhambisana nekhodi yezintambo zikagesi, xhuma i-PVS6 ku-UL Listed 15 A ezinikele yebreaker usebenzisa izintambo ezingu-14 AWG, noma i-UL Listed 20A elinganiselwe ibreak usebenzisa izintambo ezingu-12 AWG. Okokufaka kokusebenza kwamanje kungaphansi kuka-0.1 amp nge-AC voltages of 240 VAC (L1-L2).
• I-PVS6 iqukethe ukuvikelwa kokuhlinza okudlulayo kwangaphakathi ukuze kuxhunywe ohlangothini lomthwalo lwephaneli yesevisi ye-AC yokungena (overvoltagisigaba III). Okokufakwa ezindaweni ezisengcupheni yokuhlinzwa okukhiqizwa i-high-voltage izinsiza, imboni, noma umbani kuyanconywa ukuthi kufakwe futhi idivayisi yokuvikela yangaphandle Esohlwini lwe-UL.
• Ungazami ukulungisa i-PVS6. Tampukufaka noma ukuvula indawo engenhla kwenza iwaranti yomkhiqizo ingasebenzi.
• Sebenzisa kuphela I-UL Listed, double-insulated, XOBA CTs nge-PVS6.

Isitifiketi Sokuphepha

• I-UL Isohlwini njenge-UL 61010 kanye ne-UL 50 ukuze isetshenziswe ngaphandle.
• I-PVS6 ayiyona imitha yokusetshenziswa, idivayisi yokunqamula, noma idivayisi yokusabalalisa amandla.

Ukuhambisana ne-FCC
Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:

1. Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi, futhi
2. Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

QAPHELA: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana neNgxenye 15 yeMithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise, ​​futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma ingafakiwe futhi isetshenziswe ngokuhambisana nemiyalelo, ingase ibangele ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, zama ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwezinto zokusebenza nomamukeli.
• Xhuma okokusebenza endaweni esesekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

AMANOTHI ABALULEKILE:
Isitatimende Sokuchayeka Kwemisebe
Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-FCC RF ebekwe endaweni engalawuleki. Lo mshini kufanele ufakwe futhi usetshenziswe ngebanga elincane elingama-20 cm (7.87 in) phakathi kocingo nomzimba wakho.
ISEXWAYISO:
Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobelana kungase kuchithe igunya lomsebenzisi lokusebenzisa okokusebenza. Lolu cingo kanye nezimpondo zalo akumele kubekwe ndawonye noma kusebenze ngokuhambisana nanoma yiluphi olunye uthi.

I-PVS6 Quick Start Guide
Landela le miyalo ukuze ufake, ulungise, futhi unike amandla i-PV Supervisor 6 (PVS6) ukuze iqale ukuthola idatha yokuqapha. Bheka Imiyalo Yokufaka ye-PVS6 ngakolunye uhlangothi ukuze uthole imiyalelo ephelele. Qaphela ukuthi i-PVS6 ihlanganiswe ne-Hub+Tm ezinhlelweni ze-SunVault™!

I-PVS6 Connection Diagram: AC Module Site	I-PVS6 Connection Diagram: I-DC Inverter Site

Intambo yomzila nekhebuli:

• Gcwalisa zonke izimbobo zepayipi endaweni ebiyelwe ngezingxenye ezilinganiselwe ngohlobo 4 lwe-NEMA noma kangcono ukuze ugcine ubuqotho besistimu yendawo ebiyelwe.
• Shaya izimbobo zepayipi ezengeziwe ezingu-0.875″ (22 mm) noma 1.11" (28 mm), uma kudingeka, nge-drill yesinyathelo (ungasebenzisi isikrudrayiva noma isando).
• Sebenzisa kuphela izimbobo ezinikeziwe zepayipi noma izindawo zokubhoboza futhi ungalokothi usike izimbobo phezulu noma emaceleni wendawo ebiyelwe.
• Ungalokothi usebenzise i-inverter noma ikhebuli yokuxhumana ye-Ethernet kumgudu ofanayo nezintambo ze-AC.
• Izintambo ze-CT ne-AC zingase zisetshenziswe epayipini elifanayo.

1. Faka i-PVS6
   Khipha ubakaki we-PVS6 odongeni usebenzisa ihadiwe elisekela u-6.8 kg (15 lb); sebenzisa i-screwdriver ye-Phillips ukuze uvikele i-PVS6 kubakaki usebenzisa izikulufu ezimbili ezinikeziwe.
2. Susa wonke amakhava e-PVS6
   Sebenzisa i-screwdriver ye-flathead ukuze ususe ngokucophelela isembozo se-enclosure. Sebenzisa i-Phillips ukuze ususe amakhava ezintambo ze-AC.
3. Amandla we-PVS6 wentambo
   Sebenzisa izikhondatha zethusi kuphela, nge-min. Izinga lokushisa elingu-75°C. ukukala. Faka isekethe engu-240 noma engu-208 VAC ezinikele. Izintambo zomhlaba kumatheminali e-J2: oluhlaza kuya ku-GND; mnyama kuye ku-L1; okumhlophe kuya ku-N; futhi ibomvu ku-L2.
4. Faka ukusetshenziswa kwe-CTs
   Bheka Isigaba 3 ngakolunye uhlangothi ukuze uthole imiyalelo ephelele yokufaka i-CT. Beka ama-CTs eduze kwamakhondaktha wesevisi angenayo: L1 CT (izintambo ezimnyama nezimhlophe) eduze noLayini 1 kanye ne-L2 CT (izintambo ezibomvu nezimhlophe) eduze noLayini 2. INGOZI
   Voltage
   Sebenzisa i-PPE efanele bese uvala amandla ephaneli yesevisi
   Sebenzisa kuphela I-UL Listed, double-insulated, XOBA CTs nge-PVS6.
5. Ama-CTs wokusetshenziswa kwentambo
   Izintambo zomhlaba kumatheminali e-J3: izintambo ze-L1 CT ne-L2 CT kuya ku-CONS L1 ehambisanayo ne-CONS L2.
6. Shintshanisa amakhava ezintambo ze-PVS6
   Sebenzisa i-screwdriver ukuze umiselele amakhava ezintambo ze-AC phezu kwezintambo zamandla ze-AC. Isexwayiso! Ukuze uvikele engcupheni yokushaqeka kukagesi faka kabusha amakhava ezintambo ze-AC ngaphambi kokunika amandla kabusha okokusebenza.
7. Xhuma ukuxhumana kwe-inverter ye-DC
   Uma isiguquli se-DC sifakiwe, xhuma ukuxhumana kusuka kusiguquli se-DC kuya ku-PVS6. Alukho uxhumano olwengeziwe oludingekayo kumamojula we-AC.
8. Xhuma i-PVS6 ku-inthanethi
   Xhuma ku-inthanethi yamakhasimende nganoma yikuphi:

   	Ikhebula le-Ethernet Ukusuka ku-PVS6 LAN2 ukuya kumzila wamakhasimende (indlela enconyiwe).
   	I-WiFi yekhasimende Xhuma ngesikhathi sokusebenza ngenethiwekhi nephasiwedi.

9. Ikhomishini ngohlelo lokusebenza lwe-SPPC
   Vula uhlelo lokusebenza lwe-SunPower Pro Connect(SPPC) bese ulandela imiyalelo esesikrinini ukuze ukhiphe isistimu.
10. Shintshanisa amasheya PVS6
    Thinta ikhava ebiyelwe ku-PVS6.

• Hlala uvule noma unqamule isekethe ohlelweni lokusabalalisa amandla (noma isevisi) yesakhiwo ngaphambi kokufaka noma ukusevisa ama-transformer amanje (CTs).
• I-CTS akumele ifakwe emishinini lapho idlula khona u-75% wesikhala sezintambo sanoma iyiphi indawo ephambanayo phakathi kwempahla.
• Khawulela ukufakwa kwe-CT endaweni lapho izovimba khona ukuvuleka komoya.
• Khawulela ukufakwa kwe-CT endaweni ye-breaker arc venting.
• Ayizifanele izindlela zokufaka izintambo zeClass 2.
• Akuhloselwe ukuxhunywa kumishini ye-Class 2
• Vikela i-CT, namakhondaktha womzila ukuze angaxhumani ngokuqondile namatheminali abukhoma noma amabhasi.
• ISEXWAYISO! Ukunciphisa ubungozi bokushaqeka kukagesi, hlala uvule noma unqamule isekethe ohlelweni lokusabalalisa amandla (noma isevisi) yesakhiwo ngaphambi kokufaka noma ukusevisa njenge.
• Ukuze isetshenziswe ne-UL Listed Energy Monitoring Current Sensors ezilinganiselwe i-Double Insulation.

51 Rio Robles San Jose CA 95134
www.sunpower.com
1.408.240.5500
Imiyalelo yokufaka ye-PVS6 kanye Nomhlahlandlela Wokuqalisa Ngokushesha
531566 RevD
Copyright 2022 SunPower Corporation

Amadokhumenti / Izinsiza

SUNPOWER PVS6 Residential Monitoring System [pdf] Umhlahlandlela Womsebenzisi 529027-BEK-Z, 529027BEKZ, YAW529027-BEK-Z, YAW529027BEKZ, PVS6 Residential Monitoring System, PVS6, Residential Monitoring System, Monitoring System

Izithenjwa

• Imaniwali yosebenzisayo