Umphathi we-PVS6 PV
Umhlahlandlela wokufaka 

Landela le miyalo ukuze ufake futhi uthumele i-PV Supervisor 6 (PVS6) ukuze uthole idatha yokuqapha. Bheka Umhlahlandlela Wokufaka we-Equinox (#518101) ukuze uthole imiyalelo ephelele yokufaka isistimu ye-Equinox.
Ukusetshenziswa okuhlosiwe: I-PVS6 iyithuluzi le-datalogger–gateway elisetshenziselwa isistimu yelanga nokuqapha ekhaya, ukulinganisa, nokulawula.

Ikhithi ihlanganisa:

• I-PV Supervisor 6 (PVS6)
• Ukubeka phezulu ubakaki
• (2) Izikulufu
• (2) Izimbobo zokuxhuma
• (2) 100 A Ama-Transformer Amanje (ahanjiswa ngokwehlukana)

Uzodinga:

• Phillips kanye ne-screwdriver encane ye-flathead
• Izingxenyekazi zekhompyutha ezisekela u-6.8 kg (15 lbs) ukuze kufakwe ubakaki
• Ithuluzi le-crimp le-RJ45
• I-wire cutter ne-stripper
• Isinyathelo sokuprakthiza (Uma uthanda)
• Ikhompyutha ephathekayo enenguqulo yakamuva ye-Chrome noma yeFirefox efakiwe
• Ikhebula le-Ethernet
• Ukuqapha kwakho kwe-SunPower webimininingwane yesayithi
• (Ongakukhetha) Inethiwekhi ye-Wi-Fi yekhasimende kanye nephasiwedi

Intambo yomzila nekhebula

• Gcwalisa zonke izimbobo endaweni ebiyelwe ngezingxenye ezilinganiselwe ngohlobo 4 lwe-NEMA noma kangcono ukuze ugcine ubuqotho besistimu yendawo ebiyelwe.
• Geza izintuba ezengeziwe nge-drill yesinyathelo (ungasebenzisi i-screwdriver noma isando).
• Sebenzisa kuphela izimbobo ezinikeziwe zepayipi noma vula izindawo futhi ungalokothi usike izimbobo phezulu noma emaceleni wendawo ebiyelwe.
• Ungalokothi usebenzise i-inverter noma ikhebuli yokuxhumana ye-Ethernet kumgudu ofanayo nezintambo ze-AC.
• Izintambo ze-CT ne-AC zingase zisetshenziswe epayipini elifanayo.
• Ubuningi. usayizi ovumelekile womsele we-PVS6 ungu-3/4”.

Okokufaka
208 VAC (L-L) CAT III 50/60 Hz, 0.2 A, 35 W; NOMA
240 VAC (L−L) kusukela kusistimu yezintambo ezintathu zesigaba sokuhlukaniswa CAT III, 50/60 Hz, 0.2 A, 35 W.

Izilinganiso Zemvelo
Ukungcola Iziqu 2; −30°C kuya +60°C lokushisa lokushisa elisebenzayo;15–95% umswakama ongajiki; ubuningi. ukuphakama - 2000 m; ukusetshenziswa kwangaphandle; Thayipha 3R ebiyelwe.

Faka i-PVS6

1. Khetha indawo yokufaka engekho elangeni eliqondile.
2. Khulisa ubakaki we-PVS6 odongeni usebenzisa izingxenyekazi zekhompuyutha ezifanele endaweni ekhwezwayo futhi engasekela okungenani u-6.8 kg (15 lbs).
3. Faka i-PVS6 kubakaki kuze kube yilapho izimbobo zokukhweza ezansi seziqondanisiwe.
4. Sebenzisa i-screwdriver ukuze uvikele i-PVS6 kubakaki usebenzisa izikulufu ezinikeziwe. Ungaqinisi kakhulu.

Xhuma amandla e-PVS6

Ingozi! Voltages! Ungaluniki amandla uhlelo uze uqede Izigaba 1 ukuya ku-3. Ukungena ohlelweni kuhilela ukuthintana okungenzeka kube nevolthi ebulalayo.tages kanye nemisinga. Akukho mzamo wokufinyelela, ukufaka, ukulungisa, ukulungisa, noma ukuhlola uhlelo okufanele wenziwe yinoma ubani ongafaneleki ukusebenza kuleyo mishini. Sebenzisa izikhondatha zethusi kuphela, nge-min. Izinga lokushisa elingu-75°C. ukukala.

1. Sebenzisa i-screwdriver—ungasebenzisi amathuluzi kagesi—ukulungiselela i-PVS6 yezintambo ze-AC:
   • Usebenzisa i-screwdriver ene-flat-blade, goba ngokucophelela ithebhu yokugcina ikhava ye-PVS6 ukuze uyikhulule bese ukhipha ikhava yangaphandle.
   • Khipha ikhava yezintambo ze-AC engezansi
   • Khipha ikhava yezintambo ze-AC ephezulu
2. Qalisa ipayipi lamandla ukusuka kuphaneli yesevisi uye ku-PVS6. Uma usebenzisa izintuba zangemuva zamapayipi, vala izimbobo ezingaphansi kwendawo ebiyelwe ngamapulaki embobo afakiwe.
   Sebenzisa i-step drill uma usebenzisa izindawo zokungena ezingemuva noma ezimaphakathi.
3. Xhuma i-PVS6 ku-15 A (ene-14 AWG) noma i-20 A (ene-12 AWG) I-UL Esohlwini lwe-UL ezihlukaniselwe izigxobo ezimbili ezizinikele.
   Qaphela: Kumamojula e-AC, lesi sinqamuli kufanele sibe kuphaneli yesevisi efanayo equkethe amasekhethi okukhiphayo wemojula ye-AC.
4. Hlikihla izintambo zibe ngu-12 mm futhi zihlale ngokuhambisana namalebula anamibalabala (intambo emnyama iye ku-L1, intambo ebomvu iye ku-L2, intambo emhlophe iye ku-N, nentambo eluhlaza ku-GND) kumatheminali e-J2 ngezansi kwesokunxele sebhodi le-PVS6, futhi bese uvala i-lever yokukhiya ngayinye ngokuphelele.

Faka futhi ufake izintambo kuma-CTs okusetshenziswayo

Ingozi! Ivolumu eyingozitages! Ungaluniki amandla uhlelo uze uqede Izigaba 1 ukuya ku-3. Ukungena ohlelweni kuhilela ukuthintana okungenzeka kube nevolthi ebulalayo.tages kanye nemisinga. Akukho mzamo wokufinyelela, ukufaka, ukulungisa, ukulungisa, noma ukuhlola uhlelo okufanele wenziwe yinoma ubani ongafaneleki ukusebenza kuleyo mishini.
Ubukhulu. I-120/240 VAC yesigaba sokuhlukaniswa, isistimu yezintambo ezintathu, Isigaba Sokulinganisa III, 0.333 VAC kusukela kunzwa yamanje ikalwe ukulinganisa ubuningi. 50 A.
Ama-CT anikezwe yi-SunPower alungele ukusetshenziswa kumakhondaktha angu-200 A. Ama-CTs angase alebulwe ngokuthi “100 A” kodwa lesi isilinganiso sereferensi yokulinganisa kuphela. Ungafaka ama-CTs ekucushweni okuhambisanayo noma okuyinqwaba. Bheka Imiyalo Yokufakwa Kwemitha Yokusetshenziswa kwe-CT.

1. Vala wonke amandla kuphaneli yesevisi enkulu ofaka kuyo ama-CTs.
2. Beka ama-CTs kuphaneli yesevisi enkulu, eduze kwamakhondaktha wesevisi angenayo, ngohlangothi olubhalwe ukuthi THIS SIDE TOWARD SOURCE ngasemitha yokusetshenziswa futhi kude nemithwalo. Ungalokothi ufake ama-CTs esigabeni esiqokelwe ukusetshenziswa sephaneli yesevisi.
   • Beka i-L1 CT (izintambo ezimnyama nezimhlophe) eduze kwekhondakta yesevisi kaLayini 1 engenayo
   • Beka i-L2 CT (izintambo ezibomvu nezimhlophe) eduze kwekhondakta yesevisi kaLayini 2 engenayo
3. Qondanisa izingcezu eziyinhloko zensimbi bese uvala ama-CTs.
4. Izintambo ze-CT zomzila ngomsele oya ku-PVS6.
   • Izintambo ze-CT ezisebenzayo: Ungasebenzisa izintambo ze-CT ne-AC kumsele ofanayo. Ungazisebenzisi izintambo ze-CT nezintambo zokuxhumana ze-inthanethi epayipini elifanayo.
   • Ukwelula imikhondo ye-CT: Sebenzisa i-Class 1 (600 V elinganiselwe ubuncane, 16 AWG esiphezulu) intambo yensimbi esontekile nezixhumi ezifanele; I-SunPower incoma ukuthi kusetshenziswe izixhumi zokufudumeza ezifakwe i-silicone (IDC) noma ama-telecom crimps; ungasebenzisi izintambo zikagesi (ngokwesiboneloample, THWN noma i-Romex) ukunweba imikhondo ye-CT.
   Qaphela: Bheka I-Continental Control Systems: Current Transformer (CT) Wire Extension guide at: https://ctlsys.com/current_transformer_wire_extension ngezinhlobo zezintambo eziphakanyisiwe.
5. Izintambo zeLand L1 CT kanye ne-L2 CT ku-CONS L1 ehambisanayo kanye ne-CONS L2 kumatheminali e-J3 ngezansi, amatheminali angakwesokudla ebhodi le-PVS6. Jikela ku-0.5–0.6 Nm (4.4–5.3 ku-lb). Uma ufinyeza umkhondo, hlubula ungabi ngaphezu kuka-7 mm (7/25″).
   Isexwayiso! Ungawaqinisi kakhulu amatheminali.

Qinisekisa i-CT voltage izigaba

1. Vula amandla ku-PVS6.
2. Sebenzisa i-voltmeter ukukala ivolumutage phakathi kwetheminali ye-PVS6 L1 kanye nekhondatha yesevisi ye-L1 engenayo kuphaneli yesevisi enkulu ene-L1 CT endaweni.
3. Uma i-voltmeter ifundeka kanje:
   • 0V izigaba ziqondaniswe ngendlela efanele.
   • 240 V izigaba aziqondanisiwe ngokungalungile. Hambisa i-CT kwenye i-conductor yesevisi engenayo bese uhlola kabusha ukuze uqinisekise uziro V.
4. Phinda Izinyathelo 4.2 no-4.3 ze-L2.

Xhuma ukuxhumana kwesistimu

1. Shintshanisa ikhava yezintambo ze-AC ephezulu.
2. Miselela ikhava yezintambo ze-AC engezansi phezu kwezintambo zamandla ze-AC (ngakwesokunxele uma udlule embobeni engakwesokunxele; ngakwesokudla uma udlule embobeni engakwesokudla).
3. Qalisa umzila wokuxhumana uye ekuvulekeni komsele we-PVS6 uma kudingeka. Uma usebenzisa izintuba zangemuva zamapayipi, vala izimbobo ezingaphansi kwendawo ebiyelwe ngamapulaki embobo afakiwe.
   Isexwayiso! Ungalokothi usebenzise ikhebuli yokuxhumana ye-inverter kumsele ofanayo njengezintambo ze-AC.
4. Xhuma ukuxhumana kwedivayisi ngayinye usebenzisa imbobo ehambisanayo:
   • Amamojula e-AC: Qinisekisa ukuthi uxhume amamojula e-AC kuphaneli encane yemojuli ye-AC.
   Alukho uxhumano olwengeziwe oludingekayo, i-PVS6 ixhumana namamojula e-AC kusetshenziswa umthetho olandelwayo we-PLC.
   • I-inverter ye-SMA US-22: Xhuma ikhebuli yokuxhumana ye-RS-485 kusukela embotsheni ye-PVS6 RS- 485 2-WIRE (eluhlaza okwesibhakabhaka) kanye ne-inverter yokuqala (noma kuphela) kuchungechunge lwedaisy. Landela imiyalelo yomkhiqizi kuma-inverter engeziwe e-SMA US-22.
   • I-inverter ye-SMA US-40: Xhuma ikhebula le-Ethernet elihloliwe kusukela embotsheni ye-PVS6 LAN1 ukuya kuqala (noma kuphela) i-SMA US-40 port A noma B. Landela imiyalelo yomkhiqizi ukuze uhlanganise ama-inverter engeziwe e-SMA US-40 usebenzisa izintambo ze-Ethernet.

Xhuma i-PVS6 ku-inthanethi

Xhuma ku-inthanethi yekhasimende usebenzisa noma yikuphi:

• Intambo ye-Ethernet: isuka ku-PVS6 LAN2 iye kumzila wekhasimende (indlela enconyiwe)
• Inethiwekhi ye-Wi-Fi yekhasimende: xhuma ngesikhathi sokusebenza usebenzisa igama lenethiwekhi ye-Wi-Fi yekhasimende kanye nephasiwedi

Ikhomishini nge-PVS Management App

1. Vala i-Wi-Fi ephathekayo.
2. Sebenzisa intambo ye-Ethernet ukuxhuma ikhompuyutha ephathekayo yakho ku-PVS6 noma isiguquli esisuselwe ohlotsheni lokufaka:
   • Imojuli ye-AC noma i-SMA US-22: Xhuma ikhompuyutha ephathekayo ku-PVS6 LAN 1 port.
   • I-inverter ye-SMA US-40: Xhuma ikhompuyutha ephathekayo embobeni yokuxhumana etholakalayo (A noma B) kusiguquli sokugcina (kuphela).
3. Vula isiphequluli (inguqulo yakamuva ye-Chrome noma iFirefox) bese uthayipha www.sunpowerconsole.com.
4. Landela imiyalo esesikrinini yohlelo Lokuphatha lwe-PVS.
5. Miselela isembozo se-PVS6 esivalekile ngokusihlwitha endaweni.

Uma okokusebenza kusetshenziswe ngendlela engashiwongo i-SunPower, ukuvikelwa okuhlinzekwa yimpahla kungase konakaliswe.

Ukuphepha Nezitifiketi

Imiyalo yokuphepha
Ukufakwa kanye nenkonzo yasensimini kufanele kwenziwe kuphela ngabasebenzi abaqeqeshiwe, abaqeqeshiwe abanamakhono adingekayo nolwazi lokusebenza kulolu hlobo lwedivayisi kagesi. Inkonzo yasensimini ilinganiselwe ezingxenyeni eziqukethwe engxenyeni engezansi ye-PVS6.

• Yenza konke ukufakwa kukagesi ngokuhambisana nanoma imaphi amakhodi kazwelonke nawendawo, njenge-National Electrical Code (NEC) ANSI/NFPA 70.
• Le ndawo ebiyelwe ifanele ukusetshenziswa ngaphakathi noma ngaphandle (NEMA Type 3R). I-ambient esebenzayo isuka ku-−30°C ukuya ku-60°C.
• Ngaphambi kokuxhuma amandla, i-PVS6 kufanele igxunyekwe ngokuvikelekile odongeni lwangaphakathi noma ngaphandle ngokulandela imiyalelo ekule dokhumenti.
• Ukuze uhambisane nekhodi yezintambo zikagesi, xhuma i-PVS6 ku-UL ezinikele ekuhlukaniseni isilinganiso esingu-15 A usebenzisa izintambo ezingu-14 AWG, noma i-UL Listed 20 A-rated breaker usebenzisa izintambo ezingu-12 AWG. Okokufaka kokusebenza kwamanje kungaphansi kuka-0.1 amp nge-AC voltages of 240 VAC (L1–L2).
• I-PVS6 iqukethe ukuvikelwa kokuhlinza okudlulayo kwangaphakathi ukuze kuxhunywe ohlangothini lomthwalo lwephaneli yesevisi ye-AC yokungena (overvoltage isigaba III). Okokufakwa ezindaweni ezisengcupheni yokuhlinzwa okukhiqizwa i-high-voltagezinsizakalweni, imboni, noma ngombani, kuyanconywa ukuthi kufakwe futhi idivayisi yokuvikela yangaphandle Efakwe ohlwini lwe-UL.
• Ungazami ukulungisa i-PVS6. Tampukufaka noma ukuvula indawo engenhla kwenza iwaranti yomkhiqizo ingasebenzi.
• Sebenzisa kuphela I-UL Listed, double-insulated, XOBA CTs nge-PVS6.

Isitifiketi Sokuphepha

• I-UL Ifakwe ku-UL 61010 kanye ne-UL 50 ukuze isetshenziswe ngaphandle.
• I-PVS6 ayiyona imitha yokusetshenziswa, idivayisi yokunqamula, noma idivayisi yokusabalalisa amandla.

Ukuhambisana ne-FCC
Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:

1. Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi, futhi
2. Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

QAPHELA: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana neNgxenye 15 yeMithetho ye-FCC. Le mikhawulo iklanyelwe ukuvikela ngokunengqondo ekuphazameni okulimazayo ekufakweni kwendawo yokuhlala.
Lesi sixhobo sikhiqiza, sisebenzise, ​​futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma ingafakiwe futhi isetshenziswe ngokuhambisana nemiyalelo, ingase ibangele ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, zama ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.

AMANOTHI ABALULEKILE:
Isitatimende Sokuchayeka Kwemisebe
Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-FCC RF ebekwe endaweni engalawuleki. Lo mshini kufanele ufakwe futhi usetshenziswe ngebanga elincane elingama-25 cm (9.84 in) phakathi kocingo nomzimba wakho.

ISEXWAYISO:
Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobelana kungase kuqede igunya lomsebenzisi lokusebenzisa okokusebenza. Lolu cingo kanye nezimpondo zalo akumele kubekwe ndawonye noma kusebenze ngokuhambisana nanoma yiluphi olunye uthi noma isidlulisi ngaphandle ngokuhambisana nezinqubo ze-FCC zama-multi-transmitter product.

I-PVS6 Connection Diagram: AC Module Site

I-PVS6 Connection Diagram: I-DC Inverter Site

Intambo yomzila nekhebula

• Gcwalisa zonke izimbobo zepayipi endaweni ebiyelwe ngezingxenye ezilinganiselwe ngohlobo 4 lwe-NEMA noma kangcono ukuze ugcine ubuqotho besistimu yendawo ebiyelwe.
• Dweba izimbobo zepayipi ezengeziwe ezingu-0.875” (22 mm) noma 1.11” (28 mm), uma kudingeka, nge-drill yesinyathelo (ungasebenzisi isikrudrayiva noma isando).
• Sebenzisa kuphela izimbobo ezinikeziwe zepayipi noma izindawo zokubhoboza futhi ungalokothi usike izimbobo phezulu noma emaceleni wendawo ebiyelwe.
• Ungalokothi usebenzise i-inverter noma ikhebuli yokuxhumana ye-Ethernet kumgudu ofanayo nezintambo ze-AC.
• Izintambo ze-CT ne-AC zingase zisetshenziswe epayipini elifanayo.

Faka i-PVS6
Khipha ubakaki we-PVS6 odongeni usebenzisa ihadiwe elisekela u-6.8 kg (15 lb); sebenzisa i-screwdriver ye-Phillips ukuze uvikele i-PVS6 kubakaki usebenzisa izikulufu ezimbili ezinikeziwe.
Susa wonke amakhava e-PVS6
Sebenzisa i-screwdriver ye-flathead ukuze ususe ngokucophelela isembozo se-enclosure. Sebenzisa i-Phillips ukuze ususe amakhava ezintambo ze-AC.
Amandla we-PVS6 wentambo
Sebenzisa izikhondatha zethusi kuphela, nge-min. Izinga lokushisa elingu-75°C. ukukala. Faka isekethe engu-240 noma engu-208 VAC ezinikele. Izintambo zomhlaba kumatheminali e-J2: oluhlaza kuya ku-GND; mnyama kuye ku-L1; okumhlophe kuya ku-N; futhi ibomvu ku-L2.
Faka ukusetshenziswa kwe-CTs
Bheka Isigaba 3 ngakolunye uhlangothi ukuze uthole imiyalelo ephelele yokufaka i-CT.
Beka ama-CTs eduze kwamakhondaktha wesevisi angenayo: L1 CT (izintambo ezimnyama nezimhlophe) eduze noLayini 1 kanye ne-L2 CT (izintambo ezibomvu nezimhlophe) eduze noLayini 2.
Ama-CTs wokusetshenziswa kwentambo
Izintambo zomhlaba kumatheminali e-J3: izintambo ze-L1 CT ne-L2 CT kuya ku-CONS L1 ehambisanayo ne-CONS L2.
Shintshanisa amakhava ezintambo ze-PVS6
Sebenzisa i-screwdriver ukuze umiselele amakhava ezintambo ze-AC phezu kwezintambo zamandla ze-AC.

Isexwayiso! Ukuze uvikele engcupheni yokushaqeka kukagesi faka kabusha amakhava ezintambo ze-AC ngaphambi kokunika amandla kabusha okokusebenza.

Xhuma ukuxhumana kwe-inverter ye-DC
Uma isiguquli se-DC sifakiwe, xhuma ukuxhumana kusuka kusiguquli se-DC kuya ku-PVS6. Alukho uxhumano olwengeziwe oludingekayo kumamojula we-AC.

Xhuma i-PVS6 ku-inthanethi
Xhuma ku-inthanethi yekhasimende nganoma yikuphi:

Ikhomishini nge-PVS Management App
Vala i-Wi-Fi ephathekayo, xhuma ikhebula le-Ethernet ukusuka ku-PVS6 LAN1 kukhompuyutha ephathekayo, vula i-Chrome yakamuva noma iFirefox, thayipha www.sunpowerconsole.com, bese ulandela imiyalelo.

Qaphela: Kumasayithi ane-SMA US-40 DC inverter, xhuma ikhebula le-Ethernet ukusuka kukhompuyutha ephathekayo uye embobeni A noma B ngesiguquli sokugcina (noma kuphela).

Shintshanisa amasheya PVS6
Thinta ikhava ebiyelwe ku-PVS6.

• Hlala uvule noma unqamule amasekhethi ohlelweni lokusabalalisa amandla (noma isevisi) yesakhiwo ngaphambi kokufaka noma ukusevisa ama-transformer amanje (CTs).
• Ama-CTs angeke afakwe emishinini lapho edlula khona u-75% wesikhala sezintambo sanoma iyiphi indawo ephambanayo phakathi kwempahla.
• Khawulela ukufakwa kwe-CT endaweni lapho izovimba khona ukuvuleka komoya.
• Khawulela ukufakwa kwe-CT endaweni ye-breaker arc venting.
• Ayizifanele izindlela zokufaka izintambo zeClass 2.
• Akuhloselwe ukuxhunywa kumishini ye-Class 2
• Vikela i-CT, namakhondaktha womzila ukuze angaxhumani ngokuqondile namatheminali abukhoma noma amabhasi.
• ISEXWAYISO! Ukuze unciphise ingozi yokushaqeka kukagesi, hlala uvule noma unqamule amasekhethi ohlelweni lokusabalalisa amandla (noma isevisi) yesakhiwo ngaphambi kokufaka noma ukusevisa ama-CT.
• Ukuze isetshenziswe ne-UL Listed Energy Monitoring Current Sensors ezilinganiselwe i-Double Insulation.

77 Rio Robles San Jose CA 95134
www.sunpower.com 1.408.240.5500

Amadokhumenti / Izinsiza

I-Sunpower PVS6 PV supervisor [pdf] Umhlahlandlela wokufaka 529027-Z, 529027Z, YAW529027-Z, YAW529027Z, PVS6, PV supervisor

Izithenjwa

• Imaniwali yosebenzisayo