I-SUNPOWER AC Modules Instruction Manual

Amamojula we-SUNPOWER AC

Ulwazi Lomkhiqizo

Amamojula e-SunPower AC photovoltaic (PV) aklanyelwe ukukhiqiza i-internal direct current (DC) kanye ne-output alternating current (AC) ukuze asetshenziswe ezindaweni zokuhlala nezohwebo. Umkhiqizo ugunyazwe yi-TUV kanye ne-Entest futhi uza newaranti elinganiselwe echazwe kuzitifiketi zewaranti ye-Maxeon Solar Technologies.

Imiyalo yokusetshenziswa komkhiqizo

Ngaphambi kokufaka, ukufaka izintambo noma ukusebenzisa umkhiqizo, kubalulekile ukufunda yonke imiyalelo yokuphepha enikezwe kumanuwali yomsebenzisi. Ukwehluleka ukuthobela le miyalelo kungase kwenze iwaranti ingasebenzi.

Izinyathelo Zokuphepha Komkhiqizo

Amamojula e-AC akhiqiza i-internal direct current (DC) kanye ne-output alternating current (AC), futhi angumthombo wevolthitage lapho ingaphansi komthwalo nalapho ichayeke ekukhanyeni. Amaza kagesi angakwazi ukuvala izikhala futhi angabangela ukulimala noma ukufa uma uxhumano olungalungile noma ukunqanyulwa kwenziwa, noma uma ukuthintana kwenziwa ngemikhondo yemojuli ephukile noma edabukile. Landela lezi zinyathelo zokuphepha:

• Funda yonke imiyalelo yokuphepha ngaphambi kokufaka, ukufaka izintambo noma ukusebenzisa umkhiqizo.
• Ungayithinti imikhondo yemojuli noma izintambo ngenkathi imojuli ilayishwa noma ichayeke ekukhanyeni.
• Qinisekisa ukugxiliswa okufanele kwemojuli ye-AC kanye ne-microinverter.
• Qaphela lapho uphatha imojuli ukuze ugweme ukulimaza umkhondo noma uhlaka.

Imiyalelo yokufaka

Landela le miyalo ukuze ufake amamojula e-SunPower AC:

1. Khetha indawo efanelekile yokufaka ethola ukukhanya kwelanga okwanele.
2. Qinisekisa ukuthi indawo yokukhweza iqine ngokwanele ukusekela isisindo semojuli.
3. Faka i-microinverter ngokuhambisana nemiyalelo yomkhiqizi.
4. Xhuma imojuli ye-AC ku-microinverter usebenzisa izintambo ezinikeziwe.
5. Qinisekisa ukugxiliswa okufanele kwemojuli ye-AC kanye ne-microinverter.
6. Hlola isistimu ukuze uqinisekise ukusebenza kahle.

Ukuze uthole ulwazi olwengeziwe nezibuyekezo, bheka inguqulo yakamuva yemanuwali yomsebenzisi etholakalayo www.sunpower.maxeon.com/int/InstallGuideACModules.

Imiyalo yokuphepha nokufaka yamamojula e-SunPower AC 

Esimeni lapho kunokungqubuzana noma ukungqubuzana phakathi kwenguqulo yesiNgisi nanoma yiziphi ezinye izinguqulo zale manuwali (noma idokhumenti), inguqulo yesiNgisi iyona ekhona futhi ilawule ngazo zonke izindlela.

Ukuze uthole inguqulo yakamuva sicela ubheke www.sunpower.maxeon.com/int/InstallGuideACModules
Okuqukethwe kungashintsha ngaphandle kwesaziso.
Inkampani engu-Maxeon Solar Technologies, Ltd.
sunpower.maxeon.com

Isingeniso

Lo mbhalo unikeza imiyalelo yokuphepha nokufaka yamamojula e-SunPower AC photovoltaic (PV) achazwe lapha, wonke anawo womabili amalogo e-TUV kanye ne-EnTest kulebula yomkhiqizo ngokuphathelene nezindinganiso ze-DC kanye ne-AC (Microinverter):

Okubalulekile! Sicela ufunde le miyalo yonke ngaphambi kokufaka, ukufaka izintambo, noma ukusebenzisa lo mkhiqizo nganoma iyiphi indlela. Ukwehluleka ukuthobela le miyalo kuzovala Iwaranti ye-Maxeon Solar Technologies Limited yama-PV Modules kanye/noma Iwaranti ye-Enphase Energy Limited yama-microinverters.

Incazelo Yemibandela
Imojuli ye-AC: I-Maxeon 5, i-Maxeon 6, i-Perfomance 3 ne-6 AC module
DC Module: Imojula yelanga ye-photovoltaic ejwayelekile ngaphandle kweyunithi ye-microinverter enamathiselwe.
I-Enphase Microinverter: Igridi ehlakaniphile elungile i-IQ7A, IQ8A noma i-IQ8MC microinverter iguqula ukuphuma kwe-DC kwemojula ye-PV ibe amandla e-AC athobela igridi. Ikhebula le-Enphase AC: elibizwa nangokuthi i-Q Cable, iyintambo ye-AC enobude obuhluka ukusuka ku-1.3m ukuya ku-2.3m kuye ngokuthi i-AC Module orientation (Portrait noma Landscape), enesiphambano esingu-3.3 mm2, ifakwe kabili, ilinganiselwe ngaphandle ngezixhumi ezihlanganisiwe ze ama-microinverters. I-Maxeon Solar Technologies incoma ukuthi kusetshenziswe okungenani intambo engu-2.0m ubude be-Q ukuze kube nokuguquguquka okukhulu ekufakweni kwemojula ekucushweni kwe-Portrait. I-AC Module ixhuma ngqo ku-Q ehlanganisa izixhumi ezihlanganisiwe zasembonini.
I-Enphase Enlighten: Web-based based monitoring and management software. Abafaki bangasebenzisa i-Enlighten Manager ukuze view idatha yokusebenza enemininingwane, phatha amasistimu amaningi we-PV, njll.
Isixhumi se-DC: Ngisho noma kuvunyelwe umthetho wendawo, izixhumi ze-Plug ne-Socket ezihlanganiswe ndawonye ohlelweni lwe-PV kufanele zibe zohlobo olufanayo (imodeli, isilinganiso) esivela kumkhiqizi ofanayo okungukuthi isixhumi sepulaki esivela kumkhiqizi oyedwa kanye nesixhumi sesokhethi esivela komunye umkhiqizi, noma okuphambene nalokho. , ngeke isetshenziselwe ukwenza uxhumano. Kuvunyelwe izixhumi ezihambisanayo: I-Tyco Electronics PV4S

Umshwana wokuzikhipha emthwalweni wemfanelo
Izindlela zokufaka, ukuphatha kanye nokusetshenziswa kwalo mkhiqizo kungaphezu kwamandla enkampani. Ngakho-ke, i-Maxeon Solar Technologies ayithwesi umthwalo wemfanelo wokulahlekelwa, umonakalo, noma izindleko ezibangelwa ukufakwa, ukuphatha, noma ukusetshenziswa okungafanele.

Ulwazi Lwesitifiketi Somzimba Oqinisekisiwe
Lo mkhiqizo uhlose ukuhlangabezana noma ukweqa izimfuneko ezibekwe yi-IEC 62109-3 zamamojula e-SunPower AC. I-IEC 62109-3 Standard ihlanganisa amamojula e-PV ayisicaba ahloselwe ukufakwa ezakhiweni; noma labo okuhloswe ukuthi bazimele. Isitifiketi se-TUV asifaki ukuhlanganiswa endaweni yesakhiwo ngoba kungase kusebenze izidingo ezengeziwe. Lo mkhiqizo awuhloselwe ukusetshenziswa lapho ukukhanya kwelanga okugxilile kufakwa kumojuli. Le manuwali izosetshenziswa ngokuhambisana nezinqubo ezihamba phambili eziqashelwa yimboni futhi amamojula e-SunPower AC kufanele afakwe ochwepheshe abaqinisekisiwe kuphela.

Iwaranti Enomkhawuko
Iziqinisekiso ezilinganiselwe ze-AC Module zichazwe kuzitifiketi zewaranti ye-Maxeon Solar Technologies ezitholakala kwa- www.sunpower.maxeon.com (Bheka idokhumenti yewaranti enomkhawulo).

Izinyathelo Zokuphepha

Ngaphambi kokufaka le divayisi, funda yonke imiyalelo yokuphepha kule dokhumenti.

Ingozi! Amamojula e-AC akhiqiza i-internal direct current (DC) kanye ne-output alternating current (AC); futhi ziwumthombo we-voltage lapho ingaphansi komthwalo nalapho ichayeke ekukhanyeni. Imisinga kagesi ingavala izikhala futhi ingabangela ukulimala noma ukufa uma uxhumano olungalungile noma ukunqanyulwa kwenziwa; noma uma ukuthintana kwenziwa ngemikhondo yemojuli ephukile noma edabukile.

• Nqamula umthombo we-AC kuwo wonke Amamojula e-AC kanye/noma umboze wonke amamojula ohlwini lwe-PV ngendwangu ekhanyayo noma impahla ngaphambi kokwenza noma ukuphula uxhumano lukagesi.
• Ungawaxhumi noma unqamule amamojula uma amamojula akuchungechunge noma umthombo wangaphandle ukhona
• Sebenzisa kuphela izixhumi zokukhiya i-AC ukuze uvikele kubasebenzi abangaqeqeshiwe abanqamula amamojula ngemva kokufakwa.
• Konke ukufakwa kufanele kwenziwe ngokuhambisana namakhodi endawo asebenzayo.
• Ukufakwa kufanele kwenziwe kuphela ngabasebenzi abaqeqeshiwe nabanelayisensi efanele
• Susa bonke ubucwebe bensimbi ngaphambi kokufaka lo mkhiqizo ukuze unciphise ithuba lokuchayeka ngengozi kumasekhethi aphilayo.
• Sebenzisa amathuluzi afakwe i-insulated kuphela ukunciphisa ingozi yokushaqeka kukagesi.
• Ungami, uwise, ungaklwebhi, noma uvumele izinto ukuthi ziwe kumamojula e-AC.
• Ingilazi ephukile, ama-J-boxes, izixhumi eziphukile, kanye/noma ama-backsheets awonakele izingozi zikagesi kanye nezingozi zokuqhekeka. Uma imojuli iqhekekile ngemva kokufakwa, umuntu oqeqeshiwe kufanele asuse imojuli ohlwini futhi athinte umphakeli ukuze uthole imiyalelo yokulahlwa.
• Ungawafaki noma ubambe amamojula lapho emanzi noma ngezikhathi zomoya omkhulu.
• Izixhumi ezingaxhumekile kufanele zihlale zivikelekile ekungcoleni (isb. uthuli, umswakama, izinhlayiya zangaphandle, njll.), ngaphambi kokufakwa. Ungazishiyi izixhumi ezingaxhumekile (ezingavikelekile) zivezwe endaweni ezungezile. Indawo yokufaka ehlanzekile ibalulekile ukuze ugweme ukucekelwa phansi kokusebenza.
  Ungazivimbi izimbobo zokudonsa amanzi noma uvumele amanzi ukuthi ahlangane phakathi noma eduze kwamafreyimu e-AC Module
• Xhumana nomhlinzeki wemojula yakho uma ukunakekelwa kudingekile.
• Londoloza le miyalo!

Izici zikagesi

Izici zikagesi nedatha yokusebenzisana yegridi kuboniswa kuthebula 2 kanye nemininingwane yemojula ye-AC. Kuyisibopho somfaki ukusetha i-grid profile kanye nokuhlola i-Enphase imininingwane yegridi yezwe emiswe ngaphambili futhi lokhu kungenziwa ngokufinyelela i-inthanethi nangokuxhuma ohlelweni lwe-Enphase Enlighten.
Uma ukufakwa kubandakanya imojuli ye-SunPower AC engaveli kulolu hlu, sicela ubheke ilebula yomkhiqizo engemuva kwemojuli noma vakashela www.sunpower.maxeon.com yemininingwane yomkhiqizo.
Njengesikhumbuzo samamojula we-DC: imodyuli ye-photovoltaic ingase ikhiqize okuningi kwamanje kanye / noma i-voltage kunokuba kubikwe kwa-STC. Ilanga, isimo sezulu esipholile kanye nokubonakala okuvela eqhweni noma emanzini kungakhuphula ukukhishwa kwamanje namandla. Ngakho-ke, amanani we-Isc ne-Voc amakwe kumojula kufanele aphindwe nge-factory engu-1.25 lapho kunqunywa ingxenye yevolumu.tage izilinganiso, umqhubi ampama-acities, osayizi be-fuse, nosayizi wezilawuli ezixhunywe kokuphumayo kwe-PV. Isiphindaphinda esingu-1.25 esengeziwe singase sidingwe amakhodi athile endawo ukuze uhlukanise ama-fuse namakhondatha. I-SunPower incoma ukusetshenziswa kwe-open-circuit voltagama-coefficients okushisa asohlwini kumininingwane lapho kunqunywa I-Maximum System Voltage.

Isilinganiso Somlilo
I-AC Module inezilinganiso zomlilo ezifanayo namamojula e-DC.

Ukuxhunywa kukagesi
Amamojula kufanele axhunywe kuphela kusetshenziswa intambo ye-Enphase AC efanele nezixhumi ezihlanganisiwe. Ungashintshi noma yiziphi izixhumi.
Qinisekisa ukuthi ikhebula ayikho ngaphansi kwengcindezi yokusebenza (ithobelana neradiyasi egobayo engu-≥ 60 mm) futhi akufanele igotshwe ekuphumeni okuqondile kwesixhumi noma ibhokisi lokuhlangana. Isistimu yekhebula ye-AC Module inezixhumi zokukhiya, okuthi ngemva kokuxhunywa, zidinge ukusetshenziswa kwethuluzi ukuze kunqanyulwe. Lokhu kuvikela kubasebenzi abangaqeqeshiwe abanqamula amamojula lapho ethwele. Izixhumi zekhebula le-Enphase AC zilinganiselwe futhi zihlolwe ukuphazamisa ukulayisha kwamanje; Nokho, i-Maxeon Solar Technologies incoma ukuthi uhlale uvula isiphazamisi esizinikezele segatsha ukuze ususe amandla ngaphambi kokuxhuma noma ukunqamula noma yiziphi izixhumi; faka isihlukanisi se-AC ngokuvumelana namakhodi endawo.

Imishini Grounding
Ukubekwa phansi kwemojuli kuyadingeka ngokwe-IEC 60364-7-712 futhi lapho kuthathwa njengesibopho ngaphakathi kohlaka lokulawula lwasendaweni. Inhloso yokubekwa kwemojuli kokubili iwukuvikela kanye nezizathu zokusebenza. Isici sokusebenza sale mfuneko ukunika amandla i-Inverter noma idivayisi yokulungisa amandla ukuze inikeze ukutholwa kwephutha lomhlaba nanoma iyiphi inkomba ye-alamu. I-Maxeon Solar Technologies incoma ukusebenzisa enye yezindlela ezilandelayo zokumisa uhlaka lwemojuli. Ngaphezu kwalokho, ukuze kugwenywe ukugqwala ngenxa yokuxhumana kwensimbi okungafani, i-Maxeon Solar Technologies incoma ihadiwe yensimbi engagqwali phakathi kwethusi ne-aluminium. Ukuhlolwa kufanele kwenziwe ukuze kuqiniswe phansi ngezinga lokushisa, indawo kasawoti kanye namandla aphezulu.

1. Ukwehlisa kusetshenziswa izimbobo zaphansi ezishiwo: Sebenzisa izimbobo zaphansi ezilungiselelwe uhlaka ukuze uxhume imojuli ku-rack nge-conductor enosayizi ofanele.
2. Grounding nge clamp / uzipho: Clamp noma uzipho lungafakwa phakathi kwe-module kanye nesistimu yokushelela. Qondanisa i-grounding clamp embotsheni yefreyimu, bese ubeka ibhawodi eliphansi endaweni yokubeka phansiamp kanye nohlaka. Qinisekisa ukuthi i-clamp esetshenziswa lapho iboshiwe, izobhoboza ngempumelelo i-anodized coating ye-module futhi iqinisekise ukuqhutshwa okufanele.
3. Amamojula angase asekelwe ngokunamathisela i-lay-in ig kwenye yezimbobo zokubeka phansi kuhlaka lwemojula, futhi unamathisele umqhubi ophansi emgodini. Sebenzisa i-hardware yensimbi engagqwali (ibhawodi, amawasha, namantongomane). Sebenzisa iwasha lenkanyezi yezinyo langaphandle phakathi kwelugi nohlaka lwemojuli ukuze ubhoboze i-anodizing futhi usungule ukuthintana kukagesi nohlaka lwe-aluminium. I-asembly kufanele iphele ngenadi elishiswe ku-2.3-2.8 Nm (ngebhawodi engu-M4). Iwasha yokukhiya noma enye indlela yokukhiya iyadingeka ukuze kugcinwe ukungezwani phakathi kwebhawodi nokuhlanganisa. Ikhondakta kufanele ixhunywe esigxotsheni saphansi kusetshenziswa isikulufu sesethi ye-lug.
4. Amamojula angase asekelwe phansi kusetshenziswa isiqeshana saphansi noma iwasha yaphansi noma njengengxenye ye-module clamp. Lezi ziqeshana/amawasha aphansi kufanele zikwazi ukubhoboza ngokuphumelelayo i-anodized coating yohlaka lwemojuli futhi zithole ukuqhutshwa kogesi okulungile.

Zonke izisombululo ezingenhla zingenzeka kodwa kufanele zihlolwe ngesakhiwo sokukhweza ngenjongo yokubeka phansi.

Uxhumano Lweziyingi ze-AC
Kuyisibopho somfaki ukuqinisekisa ukusebenzisana kwegridi endaweni yakho yokufaka (240/380 noma 4-wire 2-pole). Amamojula e-AC kufanele axhunywe kumthombo wosizo ngevolumu efaneletage kanye nemvamisa ukuze kusebenze futhi kukhiqizwe amandla. Akuwona amajeneretha azimele futhi awadali i-AC voltage ngakho azikwazi ukusebenza ngaphandle kwesignali ye-AC ekhiqizwe usizo. Amamojula e-AC kufanele axhunywe kuphela kusekethe yegatsha elizinikele. Amakhebuli e-AC nezixhumi ziyaqinisekiswa futhi zikalwe ngenani eliphezulu lamayunithi e-AC ngokuhambisana kuphela. Lapho uxhuma amamojula, UNGAQHUBEKI inombolo elandelayo yesekhethi yegatsha le-AC elilodwa lamamojula.
Inombolo enkulu yama-microinverter engafakwa kusekethe yegatsha ngalinye le-AC ingatholakala kudatha yedatha yoMkhiqizo. Lo mjikelezo kufanele uvikelwe ukuvikelwa kwe-overcurrent. Hlela amasekhethi egatsha lakho le-AC ukuze ahlangabezane nemikhawulo elandelayo ngenombolo enkulu ye-AC Module ngegatsha ngalinye uma ivikelwe nge-20 amp (ubukhulu) ngaphezu kwedivayisi yokuvikela yamanje.

Isilinganiso esiphezulu* se-IQ Micro ngesekhethi yegatsha ye-AC (240 VAC) Isifunda: EU	Isilinganiso esiphezulu* se-IQ Micro ngesekhethi yegatsha ye-AC (230 VAC) Isifunda: APAC
I-IQ7A noma i-IQ8A: 10 I-IQ8MC: 11	I-IQ7A: 11

Imikhawulo ingase yehluke. Bheka izidingo zasendaweni ukuze uchaze inani lama-microinverter egatsha ngalinye endaweni yangakini.

ISEXWAYISO! Ukuze unciphise ingozi yomlilo, xhuma kuphela kusekethe enikezwe 20 A esiphezulu ukuvikelwa overcurrent igatsha lesifunda.

Ngezansi izinyathelo ezinkulu zokufaka:

1. Faka ipheya yesixhumi esixhumeke kwi-Field-wireable, i-J-Box ozikhethela yona
2. Misa Ikhebula le-Enphase Q
   Ngemojuli ngayinye:
3. Beka imojuli ye-AC kanye nama-microinverter aphumayo. Bheka iSigaba 5.3 ukuze uthole umfanekiso
4. Xhuma ama-microinverter kusixhumi sekhebula le-Q
5. Faka amamojula e-AC
6. Phatha ikhebula le-Q kuhlaka lwemojuli kanye nomzila wesitimela
   Ngomugqa ngamunye:
7. Dala imephu yokufaka
8. Qeda ikhebula le-Q ekugcineni i-microinverter
9. Xhuma ku-J-Box
10. Isistimu yokunika amandla

Ukuphathwa Kwekhebula
Sebenzisa iziqeshana zekhebula noma ukusonga kwentambo yokubopha ukuze unamathisele ikhebula le-AC ku-racking. Ikhebula kufanele lisekelwe ukuze kugwenywe noma iyiphi ikhebula entekenteke ngokungafanele ngokwemfuneko yendawo.

Kumamojula Okusebenza angu-3 AC, qaphela ukuthi ungakhiphi ikhebula le-DC elikhwezwe kuqala efekthri kuzisekelo zekhebula ezithile.
Gqokisa noma iyiphi i-cabling eyeqile kumaluphu ukuze ingaxhumani nophahla. Ungawakhi amalophu amancane kuno-12 cm ububanzi.

Microinverters Connection
Bheka izinyathelo ezinkulu zokufaka ezichazwe kuSigaba4.2 bese ulalela ngokuchofoza:

1. lapho ama-microinverters ephuma futhi
2. lapho izixhumi ze-AC zihlanganyela
   Hlola izixhumi ze-AC ukuze uqinisekise ukuthi aziphukanga, azibunjwanga kahle, noma zonakalisiwe ngaphambi kokuxhuma. Mboza noma yiziphi izixhumi ezingasetshenzisiwe kukhebula ye-AC nge-Enphase Sealing Caps. Lalela ukuchofoza njengoba amakepisi wokuvala ehlanganyela.

ISEXWAYISO! Faka amakepisi wokuvala kuzo zonke izixhumi ze-AC ezingasetshenzisiwe njengoba lezi zixhumi ziba bukhoma uma isistimu inikwa amandla. Izigqoko zokuvala ziyadingeka ukuze kuvikelwe ekungeneni komswakama.

Ukukhweza Module

Lesi sigaba siqukethe ulwazi lwamamojula e-AC. Qinisekisa ukuthi usebenzisa ulwazi olulungile lohlobo lwemojuli yakho.
Iwaranti ye-Maxeon Solar Technologies Limited yamamojula e-PV incike kumamojula akhwezwayo ngokuvumelana nezimfuneko ezichazwe kulesi sigaba.

Ukucatshangelwa kwesayithi
I-AC Module kufanele ifakwe kuphela ezindaweni ezihlangabezana nezidingo ezilandelayo:

• Ubukhulu be-Altitude: Amamojula e-AC angafakwa ezindaweni ezinobukhulu obungamamitha angu-2000 ngaphezu kwezinga lolwandle.
• Izinga Lokushisa Lokusebenza: Amamojula e-AC kufanele afakwe ezindaweni eziqinisekisa ukuthi amamojula azosebenza ngaphakathi kwamazinga okushisa aphezulu kanye nobuncane alandelayo:

Ubukhulu. I-Operating Cell Temp.	+85°C
Ubukhulu. Ukusebenza kwe-microinverter Temp.	+ 60°C
Ubukhulu. I-AC Module Ambient Temp.	+50°C
Okuncane. I-AC Module Operating Temp.	−40°C

• Amandla Womklamo: Amamojula e-AC aklanyelwe ukuhlangabezana nobukhulu bokucindezela kokuphozithivu (noma phezulu, isb. umoya) kanye nenegethivu (noma eyehlayo, isb. umthwalo omile) uma efakwe ezimisweni zokukhweza ezicaciswe kuSithasiselo ukuze uthole imininingwane yezilinganiso zokulayisha nezindawo ezikhwezwayo. Amamojula e-AC nawo ahlolwe ku-IEC 61215 ngomthwalo wedizayini omuhle noma omubi ongu-3600 Pa nge-1.5 Safety Factor.
  Lapho ukhweza amamojula ezindaweni ezithandwa yiqhwa noma ezinomoya ophezulu, ukunakekelwa okukhethekile kufanele kuthathwe ukukhweza amamojula ngendlela enikeza amandla anele okuklama ngenkathi kuhlangatshezwana nezidingo zekhodi yendawo.
  Okubalulekile! Bheka Isithasiselo esibonisa lapho okumele ukhwezwe khona kuhlaka lwemojuli kanye nezilinganiso zokulayisha ezivumelekile ezihambisana nezindawo zokukhweza ezikhethiwe. Ukuze usebenzise amathebula, khomba izindawo ezimbili zokukhweza ofisa ukukhwezwa kuzo. Ungakhetha ukukhweza kunoma iyiphi indawo inqobo nje uma amaphoyinti okukhweza elingana mayelana ne-eksisi eyodwa yemojuli. Khomba inhlanganisela yezindawo zokukhweza ozikhethile ku-Appendix bese ubhekisela esilinganisweni somthwalo esihambisanayo. Qaphela futhi ukuthi izilinganiso zomthwalo zihlukile kumamojula asekelwa ojantshi; ngokumelene namasistimu anamathisela amamojula ngaphansi kohlaka lwemojuli noma ngaphandle kosekelo lukaloliwe.

Izindawo Zokusebenza Ezingeziwe Ezigunyaziwe:
Amamojula angakhwezwa endaweni enolaka elandelayo ngokuya ngemikhawulo yokuhlola ebalulwe ngezansi:
Ukuhlola ukugqwala kwenkungu kasawoti: Ubukhulu be-IEC 61701 6
I-Ammonia Corrosion Resistance: Ukugxila kwe-IEC 62716: 6,667 ppm

Izindawo Zokusebenza Ezingabaliwe
Ezinye izindawo zokusebenza azinconyelwe kumamojula e-SunPower AC, futhi azibandakanyi ku-Maxeon Solar Technologies Limited Warranty kulawa mamojuli. Amamojula we-Maxeon akufanele afakwe endaweni lapho angase ahlangane khona ngokuqondile namanzi anosawoti, noma enye indawo enolaka. Amamojula ka-Maxeon akufanele afakwe eduze koketshezi oluvuthayo, amagesi, noma izindawo ezinezinto eziyingozi; noma izimoto ezihambayo zanoma yiluphi uhlobo. Xhumana ne-Maxeon Solar Technologies uma kukhona imibuzo engaphenduleki mayelana nendawo yokusebenza.

Izilungiselelo zokukhweza
Amamojula angase afakwe, umumo ofanele ukuze kwandiswe ukukhanya kwelanga.
Ukuze uvimbele ukuthi amanzi angangeni ebhokisini lokuhlangana (elingase lilethe ingozi yezokuphepha), amamojula kufanele aqondiswe ngendlela yokuthi ibhokisi lokuhlangana libe sendaweni ephezulu kakhulu futhi akufanele ligxunyekwe ngendlela yokuthi indawo engaphezulu ibheke phansi.
Ngaphezu kwalokho, qinisekisa ukuthi umumo wemojuli futhi uvimbela i-microinverter ekuchayekeni emvuleni, i-UV nezinye izehlakalo zesimo sezulu esiyingozi (iqhwa/iqhwa).
Sifuna futhi ukukhumbuza ukuthi ukungangeni kwamanzi akuqinisekiswa ngamamojula kodwa yisistimu yokukhweza nokuthi i-drainage kufanele yakhelwe kahle amamojula e-AC. UMaxeon uncoma ukusebenza kahle kwesistimu (ukunciphisa umphumela wokungcolisa/ukuhlanganisa amanzi) ubuncane be-engeli yokutsheka engu-5°.
Ukususwa phakathi kwamafreyimu amamojula kanye nesakhiwo noma umhlabathi kuyadingeka ukuze kuvinjelwe ukulimala kwezintambo futhi kuvumela umoya ukuba ujikeleze ngemuva kwemojuli. Imvume yokuhlanganisa enconyiwe phakathi kwemojuli ngayinye efakwe kunoma iyiphi isistimu yokukhweza iyibanga elincane elingu-5 mm.
Ukususwa phakathi kohlaka lwamamojula kanye nendawo yophahla kuyadingeka ukuze kuvinjelwe ukulimala kwezintambo kanye nokwenza umoya ujikeleze ngemuva kwemojuli. Ngakho-ke ubuncane obungu-50mm buyadingeka phakathi kohlaka lwemojuli nendawo yophahla.
Uma ifakwe ophahleni, i-module izofakwa ngokuvumelana nesakhiwo sendawo nesifunda kanye nemithetho yokuphepha komlilo. Uma ngabe imojuli ifakwe ophahleni oludidiyelwe lwe-PV-System (BIPV), izogxunyekwa phezu kwendawo engaphansi engangeni manzi futhi ekwazi ukumelana nomlilo elinganiselwe yalolu hlelo lokusebenza.
Kumamojula we-Peformance 3 kanye ne-6 AC, ukuze unikeze ukufinyelela okungcono kokuxhumeka kwezintambo ze-AC ku-microinverter, uMaxeon uncoma ukulandelana kokufakwa okulandelayo:

• Uma i-microinverter isendaweni ephansi, khona-ke kunconywa ukufaka amamojula ukusuka kwesobunxele kuya kwesokudla.
• Lapho i-microinverter isendaweni ephezulu, khona-ke kunconywa ukuthi ufake amamojula ukusuka Kwesokudla kuye Kwesobunxele.

Amasistimu okukhweza amamojula kufanele afakwe kuphela esakhiweni esicatshangelwe ngokusemthethweni ubuqotho besakhiwo futhi kwaqinisekiswa ukuthi siyakwazi ukuphatha isisindo esingeziwe samamojula namasistimu okukhweza, nguchwepheshe wokwakha oqinisekisiwe noma unjiniyela.
Amamojula e-AC agunyazwa kuphela ukuthi asetshenziswe uma ozimele bawo basembonini bephelele. Ungasusi noma uguqule noma yiluphi uhlaka lwemojuli. Ukudala izimbobo zokukhweza ezengeziwe kungalimaza imojuli futhi kunciphise amandla ohlaka.
Amamojula angahle afakwe kusetshenziswa izindlela ezilandelayo kuphela:

1. I-Clamps noma iziqeshana:
   Faka imojuli ngeziqeshana ezinamathiselwe ezinhlangothini ezinde zemojuli. Bheka ububanzi obuvumelekile kuSigaba 5.0 (Isithasiselo). Izifaki kufanele uqinisekise i-clamps banamandla anele ukuvumela ukuklama okuphezulu Umfanekiso 1a: Clamp Phoqa ukucindezela kwezindawo kwemojuli. Iziqeshana kanye clamps awanikezwa yi-Maxeon Solar Technologies. Clampama-s avikeleke phezulu kohlaka akumele akhubaze i-flange ephezulu. Clamps kufanele isebenzise amandla e-collinear 'ngodonga' lohlaka lwemojuli futhi ingagcini nje ku-flange ephezulu. Clampangeke asebenzise amandla eqile kuhlaka, asonte i-flange engaphezulu, noma athinte ingilazi - lezi zinqubo zenza ize iwaranti yemojuli kanye nohlaka lwengozi nokuphuka kwengilazi. Umfanekiso 1a ukhombisa izindawo zohlaka oluphezulu clamp amandla. Gwema i-clampUkungena ngaphakathi kwamakhona amamojula angu-50mm ukunciphisa ingozi yokuchezuka kwekhona lozimele kanye nokuphuka kwengilazi. Lapho clampUma kuhlaka lwemojula, i-torque ngeke idlule ku-15 Nm ukunciphisa amathuba okuguqulwa kohlaka. Kumelwe kusetshenziswe isikrufu se-torque esilinganisiwe. Amasistimu okukhweza kufanele ahlolwe ukuthi ayahambisana yini ngaphambi kokufaka ikakhulukazi uma isistimu ingasebenzisi i-Cl.amps noma iziqeshana. Sicela uthinte i-Maxeon Solar Technologies ukuze uthole imvume yokusetshenziswa kwe-non-standard pressure clamps noma iziqeshana lapho amanani etorque ephakeme kunalokho okushiwo ngenye indlela.
   I-cl encaneamp imvume yobubanzi ngu-≥35mm, kanye ne-cl yekhonaampngenani elincane clamp ububanzi: ≥50mm. Clamps akufanele ixhumane nengilazi yangaphambili kanye ne-clamps akufanele ikhubaze uhlaka.
   UMaxeon akancomi futhi akatusi uhlelo lokusebenza kumamojula we-clamps okuthi, njengengxenye yomsebenzi wawo wokumisa phansi noma womhlaba, abe namazinyo noma izici zozipho (bheka uMdwebo 2) okungenzeka, ngawodwana noma ngokunqwabelana, kubangele ukuphuka kwemojuli ngenxa (futhi ngaphandle komkhawulo):
   1. izici eziphansi ezithinta ingilazi yangaphambili efakwe kumojula ngenxa yokuma kwalesi sici sokubeka phansi,
   2. umumo, indawo noma inombolo yezinto eziphansi ezikhubaza uhlaka lwangaphezulu lwemojuli, noma
   3. i-clamp ukugcwala ngokweqile ngesikhathi sokufakwa.
2. Qeda i-Mount: Ukuphela kokukhweza ukugunda/clampUkungena kwamamojula elanga ekhoneni lohlangothi olufushane kuya kumzila osekelayo. Umzila wesitimela okhuphukayo kanye neziqeshana noma i-clamps kumele ibe namandla anele ukuvumela ukucindezela komklamo okuphezulu kwemojuli. Qinisekisa leli khono kukho kokubili 1) clamps noma iziqeshana kanye 2) phelisa umthengisi wesistimu yokukhweza ngaphambi kokufakwa.

Ukuphathwa kwamamojula ngesikhathi sokufakwa
Ungalokothi uphakamise noma uhambise amamojula usebenzisa izintambo noma ibhokisi lokuhlangana ngaphansi kwanoma yiziphi izimo. Ungabeki amamojula abheke phambili athintane ngqo nezindawo ezilumayo ezifana nophahla, imigwaqo eshayelayo, amaphalethi enziwe ngokhuni, ama-railing, noma izindonga njll. Ingaphezulu lemojuli liyazwela kuwoyela nezindawo ezihuzukayo, ezingaholela ekuklwebheni nasekungcoleni okungajwayelekile.

Qaphela ukuthi ungathinti i-micro-inverter ngenkathi uthulula amamojula e-Performance 3 AC, njengoba ubude be-micro-inverter budlula uhlaka lwemojuli kancane.

Isikhundla Sokuthumela: X = 31.7mm

Faka Isikhundla: X = 46.7mm

Amamojula e-AC afakwe ngengilazi embozwe i-antireflective futhi athambekele ezimpawu zokuphrinta zeminwe uma ethintwa endaweni yengilazi yangaphambili. I-Maxeon Solar Technologies incoma ukuthi unikeze ama-AC Modules anamagilavu ​​(awekho amagilavu ​​esikhumba) noma ukuthinta okukhawulela indawo yangaphambili. Noma yiziphi izimpawu zeminwe eziphuma ekufakweni zizonyamalala ngokuhamba kwesikhathi noma zingancishiswa ngokulandela imihlahlandlela yokugeza eSigabeni 6.0 ngezansi. Noma yikuphi ukumbozwa kwemojuli (amathayela epulasitiki anombala noma okufanayo) ngesikhathi sokufakwa kungaholela ekushintsheni kombala kwengilazi yangaphambili unomphela futhi akunconyiwe. Ukusetshenziswa kwamaphedi okuphakamisa i-vacuum kungabangela amamaki angapheli engilazini yangaphambili.
Izehlakalo ze-shading zidinga ukugwenywa ngesikhathi sokusebenza kwesistimu ye-PV. Isistimu akufanele inikezwe amandla kuze kube yilapho isikafula esifakwayo noma insimbi isikhishiwe ophahleni.
Amasistimu kufanele anqanyulwe kunoma yiziphi izimo zokunakekelwa okungabangela ukuthungwa (isb. ukushanela kukashimula, noma yikuphi ukulungiswa kophahla, ukufakwa kwezinti/izitsha, njll.).

Isondlo

I-Maxeon Solar Technologies incoma ukuhlolwa okubonakalayo njalo kwamamojula e-AC ukuze kuxhunywe ugesi okuphephile, uxhumo lwemishini yomsindo, nokungagqwali. Lokhu kuhlola okubonakalayo kufanele kwenziwe ngabasebenzi abaqeqeshiwe nabanelayisensi. Imvamisa ejwayelekile iba kanye ngonyaka ngokwezimo zemvelo.
Ukuhlanzwa ngezikhathi ezithile kwamamojula e-AC kuyanconywa, kodwa akudingekile. Ukuhlanza ngezikhathi ezithile kubangele ukusebenza kwemojuli okuthuthukisiwe, ikakhulukazi ezifundeni ezinamazinga aphansi emvula yonyaka (ngaphansi kuka-46,3cm (18,25 amayintshi)). Xhumana nomhlinzeki wesifaki mayelana namashejuli okuhlanza anconyiwe endawo yangakini. Ungawahlanzi noma ufutha amamojula ngamanzi ngesikhathi sokusebenza okujwayelekile (indawo yengilazi yemojuli iyashisa). Ukuze uhlanze imojuli, fafaza ngamanzi aphuzwayo, angashisi. Umfutho wamanzi ojwayelekile ungaphezu kokwanele, kodwa amanzi acindezelwe yi-100 bar (min 50 cm ibanga) angasetshenziswa. Izigxivizo zeminwe, amabala, noma ukunqwabelana kokungcola endaweni engaphambili yemojuli kungasuswa ngale ndlela: hlambulula indawo bese ulinda imizuzu emi-5. Phinda umanzise indawo bese usebenzisa isipontshi esithambile noma indwangu engenamthungo ukuze usule ingaphezulu lengilazi ngokunyakaza okuyisiyingi. Izigxivizo zeminwe ngokuvamile zingasuswa ngendwangu ethambile noma isipontshi namanzi ngemva kokumanzisa. UNGALINGE usebenzise izinto zokuhlanza ezinokhahlo njengempushana yokukhuhla, uboya bensimbi, ama-scrapers, ama-blades, noma ezinye izinsimbi ezicijile ukuhlanza ingilazi yemojuli. Ukusetshenziswa kwezinto ezinjalo kumamojula kuzosusa iwaranti yomkhiqizo.

Ukuxazulula inkinga

Qiniseka ukuthi ulandela zonke izinyathelo zokuphepha ezichazwe kule manuwali yokufaka. Ama-microinverters agadwa yi-Enphase Enlighten system. Uma imojuli itholakala ingawakhiqizi amandla ngohlelo lwe-Enphase Enlighten, sicela uxhumane ne-Enphase njengephuzu lokuqala enqubweni yokuxazulula izinkinga. Uma i-Enphase microinverter itholakala isebenza kahle, i-Enphase izoxhumana no-Maxeon Technical Support ngokuqondile.
Ukuxazulula inkinga i-microinverter engasebenzi, sicela ulandele inqubo yokuxazulula inkinga ye-Enphase:

1. Web amafomu - thumela i-imeyili nge https://enphase.com/en-in/support/contact-support#form
2. Isikhungo sezingcingo

EYurophu
I-Netherlands: +31-73-7041633
I-France/Belgium: +33(0)484350555
Germany: +49 761 887893-20
E-UK: +44 (0)1908 828928
I-APAC
E-Melbourne, Australia: +1800 006 374
E-New Zealand: +09 887 0421
I-India: +91-80-6117-2500

 

Inqubo yokufuna nge-Enlighten yabafaki: https://enphase.com/en-uk/support/system-owners/troubleshooting
Wonke amanye amaphutha sicela ubheke I-Enphase IQ Gateway Installation kanye ne-Operation Manual ku-enphase.com/support ngezinqubo zokuxazulula inkinga.

Isithasiselo (Ulwazi Olwengeziwe Lobuchwepheshe)

1. I-Enphase IQ7/IQ8A/ IQ8MC Ukufakwa kanye Nebhukwana Lokusebenza
   Sicela ubheke umhlahlandlela wokufaka wendawo ku-Enphase webindawo, isibonelo, https://enphase.com/en-uk/support/enphase-iq-7-iq-7-iq-7x-microinverter-installation-and-operation-manual
2. Gcizelela Ukukhishwa Kwekhithi Yamathuluzi Yokufaka:
   https://enphase.com/en-in/support/gettingstarted/commission
   I-Enphase Installer Toolkit wuhlelo lokusebenza lweselula lapho ungakwazi khona view izinombolo ze-serial microinverter bese uxhuma ku-IQ Gateway ukuze ulandelele ukuqhubeka kokufakwa kwesistimu. Ukuze ulande, yiya ku http://www.enphase.com/toolkit bese ungena ku-akhawunti yakho ye-Enlighten.
   Umhlahlandlela Wokuqalisa:
   https://enphase.com/sites/default/files/GettingStartedGuide_SystemVerificationUsingInstallerToolkit_InsideSystem.pdf
   Ukuxazulula Inkinga Yokufaka :
   https://enphase.com/en-uk/support-associated-products/installer-toolkit
3. I-Enphase IQ Gateway Ukufakwa kanye Nebhukwana Lokusebenza:
   Bheka ku-Enphase IQ Gateway Installation kanye neManuwali Yokusebenza ukuze wenze kusebenze ukuqapha kwesistimu nemisebenzi yokuphatha igridi.
   https://enphase.com/sites/default/files/downloads/support/IQ-Envoy-Manual-EN-US.pdf
   Umhlahlandlela uhlinzeka ngokulandelayo:
   • Ukuxhuma i-Gateway
   • Ithola amadivayisi nokuskena imephu yokufaka
   • Ixhuma ku-Enlighten nokubhalisa uhlelo

Ithebula 2. Izici zikagesi kanye nokusebenzisana kwegridi.
Izimpawu zikagesi ze-DC:

	Izilinganiso ze-DC
	DC amanani @ STC						Izinga lokushisa				Ukusebenza kahle
Imodeli	Nom. Amandla (W)	Amandla I-Tol. (%)	Voltage-rated Power (Vmpp)	I-Curr. at Rated Power, Imp (A)	Vula Isifunda Voltage, Voc (V)	I-Short Circuit Curr., Isc(A)	I-Curr. (Isc) Temp. Coef. (%/°C)	Voltage (Voc) Isikhathi. I-Coeff. (%/°C)	I-Power Temp. I-Coeff. (%/°C)	NOCT @ 20°C (inani ± 2°C)	Imojuli Ukusebenza kahle (%)	Nom. Amandla aphezulu (W) indawo ngayinye: m2 /ft2
I-SPR-MAX6-440-E4-AC	440	+5/−0	40.5	10.87	48.2	11.58	0.057	−0.239	−0.29	47.1	22.8	228/21.2
I-SPR-MAX6-435-E4-AC	435	+5/−0	40.3	10.82	48.2	11.57	0.057	−0.239	−0.29	47.1	22.5	225/20.9
I-SPR-MAX6-425-E4-AC	425	+5/−0	39.8	10.68	48.1	11.55	0.057	−0.239	−0.29	47.1	22.0	220/20.4
I-SPR-MAX6-420-E4-AC	420	+5/−0	39.6	10.62	48.1	11.53	0.057	−0.239	−0.29	47.1	21.7	217/20.2
I-SPR-MAX6-425-BLK-E4-AC	425	+5/−0	40.3	10.58	48.2	11.32	0.057	−0.239	−0.29	46.9	22.0	220/20.4
I-SPR-MAX6-415-BLK-E4-AC	415	+5/−0	39.8	10.43	48.1	11.29	0.057	−0.239	−0.29	46.9	21.5	215/20.0
I-SPR-MAX6-410-BLK-E4-AC	410	+5/−0	39.5	10.37	48.1	11.28	0.057	−0.239	−0.29	46.9	21.2	212/19.7
I-SPR-MAX6-450-E3-AC	450	+5/−0	41.0	10.99	48.3	11.61	0.057	−0.239	−0.29	47.1	23.3	233/21.6
I-SPR-MAX6-445-E3-AC	445	+5/−0	40.7	10.93	48.2	11.60	0.057	−0.239	−0.29	47.1	23.0	230/21.4
I-SPR-MAX6-440-E3-AC	440	+5/−0	40.5	10.87	48.2	11.58	0.057	−0.239	−0.29	47.1	22.8	228/21.2
I-SPR-MAX6-435-E3-AC	435	+5/−0	40.3	10.82	48.2	11.57	0.057	−0.239	−0.29	47.1	22.5	225/20.9
I-SPR-MAX6-430-E3-AC	430	+5/−0	40.0	10.74	48.2	11.56	0.057	−0.239	−0.29	47.1	22.3	223/20.7
I-SPR-MAX6-425-E3-AC	425	+5/−0	39.8	10.68	48.1	11.55	0.057	−0.239	−0.29	47.1	22.0	220/20.4
I-SPR-MAX6-420-E3-AC	420	+5/−0	39.6	10.62	48.1	11.53	0.057	−0.239	−0.29	47.1	21.7	217/20.2
I-SPR-MAX6-430-BLK-E3-AC	430	+5/−0	40.5	10.62	48.2	11.33	0.057	−0.239	−0.29	46.9	22.3	223/20.7
I-SPR-MAX6-425-BLK-E3-AC	425	+5/−0	40.3	10.58	48.2	11.32	0.057	−0.239	−0.29	46.9	22.0	220/20.4
I-SPR-MAX6-420-BLK-E3-AC	420	+5/−0	40.0	10.49	48.2	11.30	0.057	−0.239	−0.29	46.9	21.7	217/20.2
I-SPR-MAX6-415-BLK-E3-AC	415	+5/−0	39.8	10.43	48.1	11.29	0.057	−0.239	−0.29	46.9	21.5	215/20.0
I-SPR-MAX6-410-BLK-E3-AC	410	+5/−0	39.5	10.37	48.1	11.28	0.057	−0.239	−0.29	46.9	21.2	212/19.7
I-SPR-MAX6-405-BLK-E3-AC	405	+5/−0	39.3	10.30	48.1	11.26	0.057	−0.239	−0.29	46.9	21.0	210/19.5
I-SPR-MAX6-400-BLK-E3-AC	400	+5/−0	39.1	10.24	48.0	11.25	0.057	−0.239	−0.29	46.9	20.7	207/19.2
I-SPR-MAX5-420-E3-AC	420	+5/−0	40.5	10.4	48.2	10.9	0.057	−0.239	−0.29	43	22.5	225/20.9
I-SPR-MAX5-415-E3-AC	415	+5/−0	40.3	10.3	48.2	10.9	0.057	−0.239	−0.29	43	22.3	221/20.5
I-SPR-MAX5-410-E3-AC	410	+5/−0	40.0	10.2	48.2	10.9	0.057	−0.239	−0.29	43	22.0	220/20.4
I-SPR-MAX5-400-E3-AC	400	+5/−0	39.5	10.1	48.1	10.9	0.057	−0.239	−0.29	43	21.5	212/19.7
I-SPR-MAX5-390-E3-AC	390	+5/−0	39.0	9.99	48.0	10.8	0.057	−0.239	−0.29	43	20.9	209/19.4
I-SPR-P6-415-BLK-E9-AC	415	+3/−0	30.2	13.76	36.7	14.39	0.04	−0.27	−0.34	45	21.1	211/19.6
I-SPR-P6-410-BLK-E9-AC	410	+3/−0	29.9	13.73	36.4	14.38	0.04	−0.27	−0.34	45	20.9	209/19.4
I-SPR-P6-405-BLK-E9-AC	405	+3/−0	29.6	13.70	36.2	14.37	0.04	−0.27	−0.34	45	20.6	206/19.2
I-SPR-P6-415-BLK-E8-AC	415	+3/−0	30.2	13.76	36.7	14.39	0.04	−0.27	−0.34	45	21.1	211/19.6
I-SPR-P6-410-BLK-E8-AC	410	+3/−0	29.9	13.73	36.4	14.38	0.04	−0.27	−0.34	45	20.9	209/19.4
I-SPR-P6-405-BLK-E8-AC	405	+3/−0	29.6	13.70	36.2	14.37	0.04	−0.27	−0.34	45	20.6	206/19.2
I-SPR-P3-385-BLK-E4-AC	385	+5/−0	36.3	10.61	43.7	11.31	0.06	−0.28	−0.34	45	19.6	196/17.3
I-SPR-P3-380-BLK-E4-AC	380	+5/−0	35.9	10.59	43.4	11.28	0.06	−0.28	−0.34	45	19.4	194/17.1
I-SPR-P3-375-BLK-E4-AC	375	+5/−0	35.5	10.57	43.0	11.26	0.06	−0.28	−0.34	45	19.1	191/16.9
I-SPR-P3-370-BLK-E4-AC	370	+5/−0	35.1	10.55	42.6	11.24	0.06	−0.28	−0.34	45	18.9	189/16.7
I-SPR-P3-385-BLK-E3-AC	385	+5/−0	36.3	10.61	43.7	11.31	0.06	−0.28	−0.34	45	19.6	196/17.3
I-SPR-P3-380-BLK-E3-AC	380	+5/−0	35.9	10.59	43.4	11.28	0.06	−0.28	−0.34	45	19.4	194/17.1
I-SPR-P3-375-BLK-E3-AC	375	+5/−0	35.5	10.57	43.0	11.26	0.06	−0.28	−0.34	45	19.1	191/16.9
I-SPR-P3-370-BLK-E3-AC	370	+5/−0	35.1	10.55	42.6	11.24	0.06	−0.28	−0.34	45	18.9	189/16.7

Izimpawu zikagesi ze-AC:

	Amanani e-AC @ STC					Izilinganiso ze-AC
						Imikhawulo yokusebenza
Imodeli	AC Voltage Okukhiphayo (nomb., V)	I-AC Max. Qhubeka. I-Curr ephumayo. (A)	Ubukhulu. Uchungechunge Fuse (A)	I-AC Max. Qhubeka. Amandla Okukhipha, W noma VA	AC Isiqongo Okukhiphayo Amandla (W) noma i-VA	I-Freq. (nom., Hz)	Kunwetshiwe Imvamisa Ibanga (Hz)	Iphutha Lesekhethi Efushane Ye-AC Yamanje Ngaphezu Kwemijikelezo emi-3 (A rms)	I-Overvolta ge Class AC Port	I-AC Port Backfeed Current (mA)	Amandla Isici Ukusetha	I-Power Factor (eguquguqukayo) ihola. / ukuhleka.	Ubukhulu. Amayunithi ngegatsha ngalinye (Europe – Australia)
I-SPR-MAX6-440-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-435-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-425-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-420-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-425-BLK-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-415-BLK-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-410-BLK-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-450-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-445-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-440-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-435-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-430-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-425-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-420-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-430-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-425-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-420-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-415-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-410-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-405-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX6-400-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX5-420-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX5-415-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX5-410-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 -11
I-SPR-MAX5-400-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-MAX5-390-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-P6-415-BLK-E9-AC	184-276	1.43	20	325	330	50	45-55	-	III	-	1.0	0.8/0.8	11 – N/A
I-SPR-P6-410-BLK-E9-AC	184-276	1.43	20	325	330	50	45-55	-	III	-	1.0	0.8/0.8	11 – N/A
I-SPR-P6-405-BLK-E9-AC	184-276	1.43	20	325	330	50	45-55	-	III	-	1.0	0.8/0.8	11 – N/A
I-SPR-P6-415-BLK-E8-AC	184-276	1.59	20	360	366	50	45-55	-	III	-	1.0	0.8/0.8	10 – N/A
I-SPR-P6-410-BLK-E8-AC	184-276	1.59	20	360	366	50	45-55	-	III	-	1.0	0.8/0.8	10 – N/A
I-SPR-P6-405-BLK-E8-AC	184-276	1.59	20	360	366	50	45-55	-	III	-	1.0	0.8/0.8	10 – N/A
I-SPR-P3-385-BLK-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 -11
I-SPR-P3-380-BLK-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-P3-375-BLK-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-P3-370-BLK-E4-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-P3-385-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 -11
I-SPR-P3-380-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-P3-375-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11
I-SPR-P3-370-BLK-E3-AC	219-264	1.52	20	349	366	50	45-55	5.8	III	18	1.0	0.8/0.8	10 – 11

Sicela ubheke imininingwane yemojuli yezimpawu zikagesi ze-AC

ISITHASISELO

UKUHLANGANISA IZILUNGISELELO NEZILINGANISO ZOKUlayishwa 

I-SunPower Maxeon 5 AC Residential Solar Panel (SPR-MAX5-XXX-BLK-E3-AC)

 

I-CL ephezuluAMPS

1. Umthwalo Wokuklama ucabangela i-1.5 Factor of Safety, Test load = Umthwalo wokuklama x 1.5. Iwaranti Yomkhiqizo ihlanganisa kuphela amanani omthwalo wokuklama. Imithwalo yemiklamo esohlwini kuleli thebula idlula yonke eminye imithwalo engachazwa ngamanye amaqembu, ngaphandle uma kukhona ukugunyazwa okusemthethweni kuka-Maxeon.
2. Imithwalo yokuhlola ingeyezinjongo zolwazi kuphela, imithwalo yedizayini kufanele icatshangelwe umklamo wephrojekthi.
3. Ojantshi akumele babe ngaphansi kweMicroinverter.
4. Ezimeni lapho ukukhweza okuxubile kuyadingeka (inhlanganisela yokukhwezwa kwezinhlangothi ezinde nezifushane), amanani aphansi womthwalo wedizayini kufanele abhekwe njengomthwalo ovunyelwe wokuklama.
5. Ukukhweza iflenge engezansi
6. Ububanzi bubonisa ukuma kwe-clamp hhayi izinsimbi

GEN 5.2 UHLAKA PROFILE

I-SunPower Maxeon 6 AC Residential Solar Panel
(SPR-MAX6-XXX-BLK-E3-AC, SPR-MAX6-XXX-E3-AC, SPR-MAX6-XXX-BLK-E4-AC, SPR-MAX6-XXX-E4-AC)

I-CL ephezuluAMPS

1. Umthwalo Wokuklama ucabangela i-1.5 Factor of Safety, Test load = Umthwalo wokuklama x 1.5. Iwaranti Yomkhiqizo ihlanganisa kuphela amanani omthwalo wokuklama. Imithwalo yedizayini efakwe ohlwini kuleli thebula idlula yonke eminye imithwalo engachazwa ngamanye amaqembu, ngaphandle uma kukhona ukugunyazwa okusemthethweni kuka-Maxeon.
2. Imithwalo yokuhlola ingeyezinjongo zolwazi kuphela, imithwalo yedizayini kufanele icatshangelwe umklamo wephrojekthi.
3. Ojantshi akumele babe ngaphansi kweMicroinverter.
   IBHOLA
4. Ezimweni lapho ukukhwezwa kwe-hybrid kuyadingeka (inhlanganisela yokukhweza okude nokufushane ohlangothini), okuphansi kakhulu
   amanani womthwalo wokuklama kufanele abhekwe njengomthwalo womklamo ovumelekile.
5. Ukukhweza iflenge engezansi
6. Ububanzi bubonisa ukuma kwe-clamp hhayi izinsimbi

I-SunPower Maxeon 6 AC Residential Solar Panel (SPR-MAX6-XXX-BLK-E4-AC, SPR-MAX6-XXX-E4-AC)

I-CL ephezuluAMPS

1. Umthwalo Wokuklama ucabangela i-1.5 Factor of Safety, Test load = Umthwalo wokuklama x 1.5. Iwaranti Yomkhiqizo ihlanganisa kuphela amanani omthwalo wokuklama. Imithwalo yedizayini efakwe ohlwini kuleli thebula idlula yonke eminye imithwalo engachazwa ngamanye amaqembu, ngaphandle uma kukhona ukugunyazwa okusemthethweni kuka-Maxeon.
2. Imithwalo yokuhlola ingeyezinjongo zolwazi kuphela, imithwalo yedizayini kufanele icatshangelwe umklamo wephrojekthi.
3. Ojantshi akumele babe ngaphansi kweMicroinverter.
   IBHOLA
4. Ezimweni lapho ukukhwezwa kwe-hybrid kuyadingeka (inhlanganisela yokukhweza okude nokufushane ohlangothini), okuphansi kakhulu
   amanani womthwalo wokuklama kufanele abhekwe njengomthwalo womklamo ovumelekile.
5. Ukukhweza iflenge engezansi
6. Ububanzi bubonisa ukuma kwe-clamp hhayi izinsimbi

GEN 5.2 UHLAKA PROFILE

Ukusebenza kwe-SunPower 3 Indawo yokuhlala ye-AC Solar Panel (SPR-P3-XXX-BLK-E3-AC, SPR-P3-XXX-BLK-E4-AC)

 

I-CL ephezuluAMPS

1. Umthwalo Wokuklama ucabangela i-1.5 Factor of Safety, Test load = Umthwalo wokuklama x 1.5. Iwaranti Yomkhiqizo ihlanganisa kuphela amanani omthwalo wokuklama. Imithwalo yedizayini efakwe ohlwini kuleli thebula idlula yonke eminye imithwalo engachazwa ngamanye amaqembu, ngaphandle uma kukhona ukugunyazwa okusemthethweni kuka-Maxeon.
2. Imithwalo yokuhlola ingeyezinjongo zolwazi kuphela, imithwalo yedizayini kufanele icatshangelwe umklamo wephrojekthi.
3. Ojantshi akumele babe ngaphansi kweMicroinverter.
4. Ezimeni lapho ukukhweza okuxubile kuyadingeka (inhlanganisela yokukhweza ohlangothini olude nokufushane), amanani aphansi womthwalo wedizayini kufanele abhekwe njengomthwalo ovunyelwe wokuklama.
5. Ukukhweza iflenge engezansi
6. Ububanzi bubonisa ukuma kwe-clamp hhayi izinsimbi

GEN 4.3 UHLAKA PROFILE

Ukusebenza kwe-SunPower 6 Indawo yokuhlala ye-AC Solar Panel (SPR-P6-XXX-BLK-E8-AC, SPR-P6-XXX-BLK-E9-AC)

I-CL ephezuluAMPS

1. Umthwalo Wokuklama ucabangela i-1.5 Factor of Safety, Test load = Umthwalo wokuklama x 1.5. Iwaranti Yomkhiqizo ihlanganisa kuphela amanani omthwalo wokuklama. Imithwalo yedizayini efakwe ohlwini kuleli thebula idlula yonke eminye imithwalo engase ichazwe eminye
   amaqembu, ngaphandle uma kukhona ukugunyazwa okusemthethweni kukaMaxeon.
2. Imithwalo yokuhlola ingeyezinjongo zolwazi kuphela, imithwalo yedizayini kufanele icatshangelwe umklamo wephrojekthi.
3. Ezimeni lapho ukukhweza okuxubile kuyadingeka (inhlanganisela yokukhweza ohlangothini olude nokufushane), amanani aphansi womthwalo wedizayini kufanele abhekwe njengomthwalo ovunyelwe wokuklama.
4. Ukukhweza iflenge engezansi
5. Ububanzi bubonisa ukuma kwe-clamp hhayi izinsimbi

GEN 4.4 UHLAKA PROFILE