STROMER ST1 Imiyalo

ST1 Imiyalo

ST1 UKUXAXULELA INKINGA

Uma kuvela amaphutha nezimpawu ezilandelayo, ingxenye efanelekile ithathelwa indawo ngokuqondile.

MOTOR

• Izinkinga zezimoto ezilandelayo ziboniswa esibonisini njengamaphutha: ICCURR, HEAT, HEAT, HALL, CURR, Faceless, BRAKE, Block, and TMM (ngaphandle kokugibela ibhayisikili)
• Izimpawu ezilandelayo zibonisa ukuthi iphutha lobuchwepheshe lenzekile enjinini: Izimoto ziyafafaza ngesikhathi sokuhamba, injini ikhiqiza imisindo yemishini, izingidi zezimoto.

BONISA

• Ukuze uthole amaphutha esibonisi, buyisela isibonisi esisodwa enguqulweni yakamuva
• Okwamanje, inguqulo yakamuva ithi 0.88 (Sebenzisa ikhodi 2000 uma ucela le nguqulo)
• Isibonisi esiphukile clamps ashintshwa ngawodwana

I-COGS YANGEMUVA

• Kulawa maphutha alandelayo, sincoma ukushintshwa kwama-cogs angemuva: amagiya awasebenzi kahle futhi kukhiqizwa imisindo ephezulu.

I-CHARGER

• Ishaja ithathelwa indawo ngokuphelele amaphutha alandelayo:
• Ishaja ayishaji (i-fuse ILUNGILE)
• Ifeni yokufaka umoya ayisebenzi noma yenza umsindo
• Ishaja ayikwazi ukuvulwa (ama-LED eshaja awakhanyi)

IFAULT NO_COM/NO_BATT (IYABONAKALA EKUBONISWA):

1. Hlola ibhethri nge-voltmeter. Uma ibhethri voltagi-e ingu-32 V noma ngaphezulu, qhubekela kuSinyathelo sesi-2.
2. Uma ibhethri voltage ingaphansi kuka-32 V, ibhethri likhishwe ngokujulile.
   
3. Hlukanisa izintambo zamandla ngaphansi kwe-chainstay kwesokunxele bese uhlola ivolumu yebhethritage kumaphini aboniswe esithombeni. Uma i-voltage etholiwe iyavumelana nomthamo webhethritage futhi isibonisi siyaqhubeka nokubonisa NO_COM/NO_BATT, qhubekela kusinyathelo sesi-3.
   
4. Uma i-voltagi-e etholiwe incane kunomthamo webhethritage (+/- 1 V umehluko), khipha ikhava yebhethri bese uhlola ukuxhumana. Uma umehluko uhlala, hlola ivolumutage ngqo kukhebula yewikhethi. Ukusebenzisa i-voltagetholwe kukhebula yewikhethi, khomba ukuthi ikhebula lamandla noma intambo yewikhethi idinga ukushintshwa.
5. Hlukanisa ikhebula lenzwa ye-TMM ngaphansi kwe-chainstay kwesokunxele (ikhebula lezigxobo ezi-3). Uma umlayezo wephutha we-NOLCOM/NO_BATT unyamalala kusibonisi, buyisela inzwa ye-TMM nekhebuli yayo.
6. Xhuma isibonisi esisebenzayo ngqo kumotho.
   Uma umlayezo wephutha usaboniswa, injini kufanele ishintshwe (qhubeka esinyathelweni sesi-5). Uma umlayezo wephutha unyamalala, xhuma isibonisi esikusibambo kwikhebula elibonisayo. Uma umyalezo wephutha unyamalala, isibonisi kufanele sishintshwe. Uma umlayezo wephutha usekhona, ikhebula lokubonisa linephutha
7. Iphutha lingancishiswa libe yinjini.

ISILINGANISO SOC

Hlola Uhlelo Lokuphatha Ibhethri ukuthola iphutha elibangelwe ukugcwala ngokweqiletage kanje.

1. I-BMS kufanele icushwe ngaphambi kokuhlola isignali ye-SOC (State Of Charge). (Ngokunika amandla amandla ebhethri cishe imizuzwana eyi-10 noma ukuyibeka ku-Stromer).
2. Linganisa ivolumutagi-e yesiginali ye-SOC (itheminali enegethivu <=> Iphinikhodi ye-SOC) kusetshenziswa i-voltmeter. Qhathanisa inani elitholiwe nethebula elingezansi. Okuhlukile kokuthi +/- 1 V kungaphakathi kwebanga lokubekezelelana.
3. Uma inani lingaphandle kwalolu hlu lokubekezelela (+/- 1 V), i-BMS inesici. Kulokhu, ibhethri idinga ukushintshwa.

10/11AH

14.5AH

UHLAZIYO-TMM

Ukuhlaziya inzwa ye-TMM kunamaphuzu amaningana okufanele uwahlole:

1. Ukuhlola okubonakalayo
   isixhumi kwesokunxele bese kwesokudla chainstay
   b Das Plastikgehdause des Sensors darf die Aussparung am Ausfallende nicht beriihren
2. Ukuhlolwa okusebenzayo
   a Faka i-Stromer endaweni yokusebenza bese ukhweza inzwa ye-TMM ngesandla (njengesithombe a), i-Stromer kufanele isebenze kanje:
   I-M25 eshintshashintshayo i-acceleration efika ku-25km/h noma i-15mph
   II M33 > 42km/h noma 26mph
   III P48 > 53km/h noma 32mph

Uma i-Stromer yehluleka enye yalezi zindlela zokunquma, inzwa ye-TMM kufanele ishintshwe.

UKUHLELA

KUBALULEKILE!
SICELA UQAPHELE AMAPHUZU ALANDELAYO UKUZE UQINISEKISE UKUTHI AKUKHO IMIPHUMELA ENGEZIWEYO EVELAYO NGESIKHATHI SEHLELO:

• Sebenzisa kuphela ama-adaptha amasha aneswishi yezintambo zokuhlela (bona umfanekiso 3).

Izinguqulo:
KUBALULEKILE! Qinisekisa ukuthi okungenani inguqulo engu-7.6 ye-firmware ihlezi ifakiwe kusibonisi se-V1.1.

I-STROMER V1 Ilogo ye-Thémus eshubhuni eliphezulu nasekhanda		STROMBER V1.1 Ilogo ye-Stromer kushubhu ephezulu neshubhu lekhanda
Isilawuli V1 Ipulaki yamandla e-2-pole		Isilawuli V1.1 Ipulaki yamandla e-3-pole

IZINDABA ZOKUHLELA

Ilayisha IFIRMWARE

IFUNDA I-FIRMWARE VERSION

1. Xhuma ikhebuli yokuhlela (nge-adaptha entsha) ku-PC naku-Stromer
2. Vula i-"StromerV120530.exe"

KUBALULEKILE!
Uma i-Stromer ixhumeke kahle ku-PC, inguqulo ye-firm-ware izoboniswa ekhoneni eliphezulu kwesokudla sesikrini futhi ichashazi lesimo lizoba luhlaza. Uma i-Stromer ingaxhumekile kahle ku-PC, inombolo yenguqulo ngeke iboniswe. Ichashazi lesimo lizoba bomvu. Kulesi simo, imbobo ye-COM engalungile kungenzeka ikhethiwe (ithebhu: Ukumiswa Kwesistimu). Inombolo yenguqulo ye-firmware iboniswa ngombala; Nokho, imibala ehlukene ibalulekile kuphela kusukela ku-Version 7.6 kuya phezulu.:

Okuluhlaza okwesibhakabhaka: I-Stromer isebenza kahle.
Okubomvu: Ngemuva kokulayisha kabusha i-firmware nge-XC800_FLOAD.exe: izilungiselelo zisazolayishwa.

Ilayisha IFIRMWARE

1. Vala ipulaki yokuhlela
2. Xhuma ikhebuli yokuhlela (nge-adaptha entsha) ku-PC naku-Stromer
3. Vala iswishi yokuhlela
4. Vula iswishi yokuhlela
5. Vula i-"XC800_FLOAD.exe"
   
6. Khetha idivayisi okuqondiswe kuyo: XC866-2F
7. Qinisekisa I-Flash Ehleliwe kufanele ihlolwe
8. Khetha imbobo ye-COM
   KUBALULEKILE: Imbobo ye-COM ehlukile isetshenziswa ekuxhumekeni ngakunye kwe-USB. Ngaso sonke isikhathi sebenzisa ikhebuli yokuhlela ye-Stromer efanayo ekuxhumekeni okufanayo kwe-USB.
9. Yenza imiyalo elandelayo ngokulandelana okubonisiwe:
   a) "Sula i-Flash"
   b)«KHETHA KONKE»
   c)«SULA MANJE» umyalezo othi «Sula i-Flash: IMPUMELELO
   d)» manje kufanele kuboniswe. Uma kungenjalo, vala uhlelo bese ubuyela kusinyathelo sesi-3. «Vula File»
   e)Khetha futhi uvule i-"Stromer_866_V090.hex". Uma ubiza lokhu okokuqala ngemva kokufaka okusha, uzodinga ukuzulazulela kufolda efanele. Okwakudala-ample: "C\Program Files (x86)\f)«Landa» > Iwindi kufanele livele elinomlayezo othi «Ukulanda Nokuqinisekisa kuyimpumelelo-Jul.»
   f)«Yenza i-Flash» > Isimo sizoba bomvu futhi
   h) "Phuma/Yeka"
   
   
10. Vula ipulaki yokuhlela (Umfanekiso 5). Ngaphambi kokusebenzisa i-Stromer, izilungiselelo kufanele zilayishwe kuqala!

Ilayisha IZILUNGISELELO

1. Xhuma ikhebuli yokuhlela (nge-adaptha entsha) ku-PC naku-Stromer
2. Vula i-"StromerV140404.exe"
   KUBALULEKILE!
   Uma i-Stromer ixhunywe kahle ku-PC, inguqulo ye-firmware izoboniswa ekhoneni eliphezulu kwesokudla sesikrini futhi ichashazi lesimo lizoba luhlaza. Uma i-Stromer ingaxhumekile kahle ku-PC, inombolo yenguqulo ngeke iboniswe. Ichashazi lesimo lizoba bomvu. Kulokhu, imbobo ye-COM engalungile kungenzeka ikhethiwe (ithebhu: Ukumiswa Kwesistimu). Inombolo yenguqulo ye-firmware iboniswa ngombala; Nokho, imibala ehlukene ibalulekile kuphela kusukela ku-Version 7.6 kuya phezulu:
   Okuluhlaza okwesibhakabhaka: I-Stromer isebenza kahle.
   Okubomvu: Ngemuva kokulayisha kabusha i-firmware nge-XC800_FLOAD.exe: izilungiselelo zisafanele ukulayishwa
3. "Layisha izilungiselelo"
   «Khetha inkinobho yomyalo wenjini elungile:

   Intaba 25:	Intaba25 250W
   Intaba 25:	Intaba 25 500W
   Intaba 33:	Intaba 33 500W
   Amandla 48:	Amandla angu-48 500W

   

4. "Landa"
5. «Layisha Izilungiselelo», ukuze uhlole ukuthi uhlelo lulungile (uyazikhethela)
6. "Yeka"

I-WIRING ST1

UKUHLELA ISILAWULI SE-ASI MY 2017 / ST1, AS OF 2017

KUBALULEKILE:
SICELA UQAPHELE AMAPHUZU ALANDELAYO UKUZE UQINISEKISE UKUTHI AKUKHO IMIPHUMELA EVELAYO NGESIKHATHI NOHLELO:

• Sebenzisa kuphela ikhebuli yokuhlela namaswishi ezinhlelo (Amakhiwane 1 & 2) asuka ku-Stromer. Ipulaki yohlelo edingekayo kuwo wonke amamodeli amadala (isofthiwe ye-511) ayisetshenziswa.
• Izinhlelo zokusebenza zesofthiwe ye-«XC Flood» kanye ne-«Stromer 5T1» akumele zisetshenziswe (bona imiyalelo yezinhlelo ze-ST1 ku-Techbookl

IKHIPHA FUTHI IFAKA ISOFTHIWE
Isofthiwe ingalandwa ku-Strainer Portal ekhasini elithi «Okulandiwe» endaweni ye-ST1. Ngemva kokulanda, vula i-ZIP file bese ufaka uhlelo.
I Ikhebula lokuhlela lingaxhunywa ku-PC kuphela ngemva kokuqedwa kokufakwa!
Switzerland=SetupST1MY17CH
EU= SetupST1MY17EU
USA=SetupST1MY17US
Ngokungafani namamotho adlule we-ST1, isilawuli se-ASI siyakwenza awunayo ipulaki yokuhlela, futhi u-A ubhekiselwa kuyo inombolo ye-serial (isb. S1&-09A0117). Lapho i-Stromer ivuliwe, inguqulo yesofthiwe "04.9^,> ivela kafushane kusibonisi sami.
1. QALA UHLELO FUTHI UKHETHE I-COM PORT ELUNGILE
Ngemuva kokuthi ukufakwa sekuqediwe, isinqamuleli sohlelo sibekwa kudeskithophu. Qala uhlelo ngokuchofoza kabili lesi sithonjana:

1. Manje faka ikhebula lokuhlela embobeni ye-USB ku-PC bese uyixhuma kuntambo yemoto ye-Stromer: kungenjalo, ingaxhunywa nekhebula elibonisa (bona umfanekiso)
   
2. Okokuqala, hambisa iswishi yokuhlela endaweni ethi «VALIWE» (0)
3. Manje hambisa iswishi yokuhlela endaweni ethi VULIWE (I)
4. Thola imbobo ye-COM efanele; uzothola ikhebula lokuhlela efasiteleni elithi «Amadivayisi Nephrinta» kusistimu yokusebenza ye-Windows 4 I-FT232R USB UART 4 Chofoza kwesokudla ku-4 Izakhiwo. Khetha i-hardware futhi uzobona imbobo ye-COM 7)
   
5. Vala iwindi leProperty (cindezela u-OK) bese udosa iwindi elithi «Amadivayisi namaphrinta».
6. Shayela i-Stromer MY17 futhi, khetha imbobo ye-COM efanele ekhoneni eliphezulu kwesokudla sohlelo bese uchofoza okuthi Xhuma kabili. Ama-LED akhanya ngokuluhlaza lapho uxhumano selusungulwe ngempumelelo.
   

2. UHLELO MOTOR
Khetha okuthi «Layisha kusuka File* ekhoneni eliphezulu kwesokunxele ngaphansi «ipharamitha*.
Ifolda equkethe amapharamitha ngokuvamile itholakala kule ndlela yokufaka elandelayo:
C:\ Uhlelo Files (x863\ ST1 MY2017 ParameterSets
Amasethi epharamitha: CH/EU.%US
CH:
Intaba 25=HUF5-A-500-25 
Intaba 33=HUF5-A-500-37
Amandla 48 =HUF6-A-500-45
I-EU:
Intaba 25=HUF5-A-250-25
Intaba 33=HUF5-A-500-37
Amandla 48=HUF6-A-500-45
E-US:
Ikilasi 1 M32=HUFS-A-500-32
Ikilasi 3 P48=HUM-A-50045Khetha okulungile file; kuphela lezo ezisebenza emakethe efanele (CH, EU, noma US) ezisohlwini
Khetha i- file okwenjini efakwe ku-Stromer (isb. Power48 = HUF6-8-500-45) futhi ivuliwe; isicelo bese siyaqala.
Umlayezo othi «Amapharamitha Alondolozwe ku-Flash* uvela kumaki angu-99%. Chofoza okuthi "KULUNGILE* ukuze uvale.
Umlayezo othi «Amapharamitha Alondolozwe ku-Flash* uvela kumaki angu-99%. Chofoza okuthi "KULUNGILE* ukuze uvale.

FAKA SOFTWARE

Iya ku "File»bese ukhetha «I-Bootloader».

Ifolda ngokuvamile itholakala endleleni emisiwe yokufaka:
C:\ Uhlelo Files (x86)\ST1 MY2017 CH\Firmware
Khetha ifayela le-EHX file bese ukhetha "Kulungile"; inqubo yokufaka bese iqala.

"Ukulandwa kwe-Firmware kuphumelele" kuyavezwa kamuva.
Khetha okuthi "KULUNGILE" ukuze uvale; i-firmware ifakiwe.

FUNDA IZIMALI ze-TMM NOLUNYE ULWAZI

Amanani enzwa ye-torque angafundwa esikrinini esithi «Imininingwane»:

I-throttle=TMM
I-Axle torque sensor offset voltage=OFFSET

Ngakwesokudla, amanye amanani ambalwa afakwe kuhlu anjengalawa:

• Ukubuyekezwa kwesofthiwe
• Ibhethri voltage
• Isimo sokushajwa kwebhethri
• Izinga lokushisa lomlawuli