UM3239
Imaniwali yosebenzisayo
Ukuqalisa ngokunyakaza kwe-X-NUCLEO-IKS4A1
I-MEMS kanye nemvelo
ibhodi lokunweba izinzwa le-STM32 Nucleo
Isenzo sesingeniso
I-X-NUCLEO-IKS4A1 iyikhithi yebhodi lokuhlola inzwa ye-MEMS enyakazayo ehlanganisa ibhodi elikhulu i-XNUCLEO-IQS4A1, elisingatha i-MEMS enyakazayo nezinzwa zemvelo, kanye ne-add-on board ekhiphekayo i-STEVALMKE001A, esingethe ama-electrode okuswayipha e-Qvar.
Iyahambisana nesakhiwo sesixhumi se-Arduino UNO R3 futhi ifaka i-LSM6DSO16IS kanye ne-LSM6DSV16X MEMS 3D accelerometers, i-LIS2MDL 3-axis magnetometer, i-LIS2DUXS12 3-axis accelerometer, i-LPS22DF MEMSH40 inzwa yokushisa, i-STHTS, i-STHTS1 kanye ne-STAD22 inzwa yokushisa.
I-X-NUCLEO-IKS4A1 ihlangana ne-STM32 microcontroller ngephinikhodi ye-I²C noma, ngezinzwa zangaphandle ezifakwe ku-adaptha ye-DIL24, ama-SPI Pins.
Ukuqalisa
1.1 Izidingo zezingxenyekazi zekhompuyutha
I-X-NUCLEO-IKS4A1 yakhelwe ukusetshenziswa namabhodi e-STM32 Nucleo (vakashela ku-www.st.com ukuze uthole ulwazi olwengeziwe).
I-X-NUCLEO-IKS4A1 kufanele ixhunywe kumaphini afanayo anoma iyiphi ibhodi le-STM32 Nucleo ngesixhumi se-Arduino UNO R3.
Izingxenye ze-X-NUCLEO-IKS4A1 zizwela i-ESD futhi, njengoba ibhodi linezixhumi zokudlula zesilisa/owesifazane, kubalulekile ukuliphatha ngokucophelela ukuze ugweme ukugoba noma ukulimaza izikhonkwane.
Izidingo zesistimu
Ukuze uqedele ukusethwa kwesistimu, udinga:
- i-Windows® (7, 8, 10) PC
- ikhebula le-USB lohlobo A kuya ku-B mini-B ukuxhuma i-STM32 Nucleo ku-PC
- i-firmware yebhodi kanye nephakheji yesofthiwe (X-CUBE-MEMS1) efakwe ku-PC yomsebenzisi
Incazelo ye-Hardware
Ibhodi likuvumela ukuthi uhlole ukusebenza kwe-accelerometer ye-MEMS enyakazayo, i-gyroscope ne-magnetometer, nomswakamo wendawo, izinga lokushisa nezinzwa zokucindezela, ngebhasi lokuxhumana le-I²C.
Iphinde ivumele ukuhlolwa okuphelele kwakho konke ukusebenza kwe-LSM6DSO16IS ne-LSM6DSV16X kanye nokuthinta kwe-Qvar nokuthinta ngokuswayipha. Kukhona nethuba lokunamathisela inzwa ye-STHS34PF80 IR ukuze unike amandla izinhlelo zokusebenza zokuthola ukunyakaza.
Ibhodi izici:
- I-LSM6DSO16IS: I-MEMS 3D accelerometer (±2/±4/±8/±16 g) + I-gyroscope ye-3D (±125/±250/±500/±1000/±2000 dps) ne-ISPU (Iyunithi Yokucubungula Okuhlakaniphile)
- I-LIS2MDL: I-MEMS 3D magnetometer (±50 gauss)
- I-LIS2DUXS12: amandla aphansi we-MEMS 3D accelerometer (±2/±4/±8/±16 g) nge-Qvar, AI, & anti-aliasing
- I-LPS22DF: Inzwa yokucindezela ye-MEMS yamandla aphansi kanye nokunemba okuphezulu, i-260-1260 hPa i-barometer yokuphuma kwedijithali ephelele
- I-SHT40AD1B
- I-STTS22H: Ivolumu ephansitage, amandla aphansi kakhulu, inzwa yokunemba kwezinga lokushisa engu-0.5 °C (-40°C ukuya ku-+125°C)
- I-LSM6DSV16X: I-MEMS 3D accelerometer (±2/±4/±8/±16 g) + I-gyroscope ye-3D (±125/±250/±500/±1000/±2000/±4000 dps) enokuhlanganiswa kwenzwa eshumekiwe, i-AI, Qvar
- Isokhethi ye-DIL engu-24-pin iyatholakala kuma-adaptha e-MEMS engeziwe nezinye izinzwa
- Umtapo wolwazi wamahhala we-firmware ophelele kanye nesibample yazo zonke izinzwa ezihambisana ne-STM32Cube firmware
- Ifakwe i-Qvar touch/swayipha i-electrode
- Izici zehabhu lenzwa ye-I²C ku-LSM6DSO kanye ne-LSM6DSV16X ziyatholakala
- Ukuhambisana kwe-MIPI I3C® kokuxhumana ne-LIS2DUXS12, LSM6DSV16X kanye ne-LPS22DF
- Ihambisana namabhodi e-STM32 Nucleo
- Ifakwe isixhumi se-Arduino UNO R3
- Ifakwe isixhumi sezimboni sokuthuthukiswa kwesicelo se-IR sensor (STHS34PF80). Ingaxhunywa ngesikhathi esifanayo se-MEMS yangaphandle nge-adaptha ye-DIL24
- Isixhumi esibonakalayo esitholakalayo sezinhlelo zokusebenza zemojuli yekhamera yangaphandle ehlanganiswe ne-LIS2DUXS12 nge-aux SPI (3/4 w)
- I-RoHS iyahambisana
- I-WEEE iyahambisana
- I-UKCA iyahambisana
Idivayisi ngayinye inokunikezwa kwamandla okuhlukile ukuvumela ukukalwa kokusetshenziswa kwamandla kwayo yonke inzwa.
Ibhodi lokunweba liwukunikezwa kwamandla okuhambisana namabhodi e-STM32 Nucleo: ikhweza i-LDO ukuze ikhiqize i-1.8 V yazo zonke izinzwa ze-MEMS ngaphandle kwenzwa yangaphandle efakwe ku-adaptha ye-DIL24, enganikezwa kokubili kusukela ku-1.8 V kanye ne-3.3 V (ukunikezwa okukhulu okuvela ku-DILXNUMX). Ibhodi le-Nucleo).
Zonke izimpawu phakathi kwezinzwa kanye nebhodi elikhulu zihunyushwa nge-level shifter.
Ukulungiselelwa kwebhuloho le-solder okuzenzakalelayo
Umsebenzisi angamisa izici ezimbalwa ze-X-NUCLEO-IKS4A1 ngokusebenzisa amabhuloho amaningana athengiswayo angashiywa evuliwe (angafakwanga) noma avalwe (afakwe) ukuze kulungiselelwe izilungiselelo zezingxenyekazi zekhompuyutha ezihlukene.
Vimba umdwebo
I-LSM6DSO16IS kanye ne-LSM6DSV16X zinehabhu yenzwa ye-I²C ebavumela ukuthi baziphathe njengenkosi ye-I²C kwamanye amadivayisi esigqila axhunywe ngebhasi le-I²Caux. Ukucushwa kwamabhasi okuhlukahlukene kuyenzeka ukuze ukhethe i-I²C master yezinzwa zemvelo/DIL24.
Imodi 1: uxhumano lwebhasi lwe-I²C olujwayelekile (zonke izinzwa)
Kumodi evamile ye-I²C, wonke amadivayisi axhunywe ebhodini elikhulu langaphandle ngebhasi elifanayo le-I²C.
Ukucushwa kwebhodi ngu:
- J4: 1-2, 11-12 (STM_SDA = SENS_SDA, HUB_SDx = GND)
- J5: 1-2, 11-12 (STM_SCL = SENS_SCL, HUB_SCx = GND)
Imodi 2: LSM6DSO16IS I²C ihabhu lenzwa (zonke izinzwa)
Kule modi ye-I²C yenzwa yehabhu, kungenzeka ukunika amandla imisebenzi ye-IMU engu-6 (Inertial Measurement Unit) ngokuqoqa idatha yangaphandle ngokulawula okuqondile kwezinzwa zemvelo ezisebhodini (izinga lokushisa, ingcindezi ne-magnetometer) nenzwa yangaphandle. (DIL24) ngebhasi elisizayo le-I²Cz elithi “SENS_I2C”. I-LSM6DSV16X, LIS2DUXS12 kanye ne-SHT40AD1B zihlala zixhumeke ebhasini elikhulu elithi “uC_I2C” eliphuma ebhodini langaphandle.
Ukucushwa kwebhodi ngu:
- I-J4: 5-6 (HUB2_SDx = SENS_SDA)
- I-J5: 5-6 (HUB2_SCx = SENS_SCL)
Imodi 3: Ihabhu lenzwa ye-LSM6DSV16X I²C
Kule hub yezinzwa, kungenzeka ukunika amandla ukusebenza kwe-IMU ye-6-axes (Inertial Measurement Unit) ngokuqoqa idatha yangaphandle ngokulawula okuqondile kwezinzwa zemvelo ezisebhodini (izinga lokushisa, ingcindezi kanye ne-magnetometer) kanye nenzwa yangaphandle (DIL24 ) ngebhasi elisizayo le-I2C elithi “SENS_I2C”. I-LSM6DSO16IS, LIS2DUXS12 kanye ne-SHT40AD1B zihlala zixhumeke ebhasini elikhulu elithi “uC_I2C” eliphuma ebhodini langaphandle.
Ukucushwa kwebhodi ngu:
- I-J4: 7-8 (HUB1_SDx = SENS_SDA)
- I-J5: 7-8 (HUB1_SDx = SENS_SDA)
I-adaptha ye-DIL24 (kuya ku-I²C2): SB16, SB21
Akukhweziwe: SB6, SB10, SB12, SB14, SB18, SB19, SB20, SB22
Imodi 4: Ihabhu lenzwa ye-DIL24 I²C (zonke izinzwa)
Esimeni lapho inzwa eshumekiwe yehabhu lenzwa ikhwezwa ebhodini nge-adaptha ye-DIL24, kungenzeka ukuthi kusetshenziswe lokhu kusebenza njenge-LSM6DSO16IS kanye ne-LSM6DSV16X.
Kulokhu kulungiselelwa, kungase kudingeke ukuxhuma i-DIL24 ebhodini langaphandle ngemigqa ye-SPI ukuze ugweme ukungqubuzana kwekheli ebhasini le-I2C ne-LSM6DSO16IS kanye ne-LSM6DSV16X. Lokhu kwenziwa ngokushintsha ukucushwa kwe-SBx.
Ukucushwa kwebhodi ngu:
- I-J4: 9-10 (DIL_SDx = SENS_SDA)
- I-J5: 9-10 (DIL_SDx = SENS_SDA)
Imodi 5: LSM6DSO16IS njengesilawuli se-Qvar
Kulokhu kucushwa, kungenzeka ukusebenzisa i-electrode yokuswayipha ye-Qvar ehlomile (ngokuyixhuma kuzixhumi ze-JP6 ne-JP7) nge-LSM6DSO16IS.
Ukucushwa kwebhodi ngu:
- I-J4: 3-4 (HUB1_SDx = QVAR1)
- I-J5: 3-4 (HUB1_Scx = QVAR2)
3.3 Ukukhetha ikheli lenzwa ye-I²C
Izinzwa eziningi zivumela ukukhethwa kwekheli le-I²C LSB ngokudonsa iphinikhodi ye-SD0 phansi noma phezulu. Ibhodi linamabhuloho e-solder okulawula izinga le-SD0.
Ithebula 1. Amabhuloho e-solder ekheli le-I²C
Ikheli elibhalwe ngokugqamile amakheli e-I2C azenzakalelayo
| Inzwa | Inani eliphakeme kakhulu lama-SD0 | Inani eliphakeme kakhulu lama-SD0 |
| I-STTS22H (U8) | ENGEZA= 71h | |
| I-LIS2DUXS12 (U5) | SB19 ADD=31h | SB20 ADD=33h |
| I-LSM6DSO16IS (U9) | SB35 ADD=D5h | SB34 ADD=D7h |
| I-LPS22DF (U6) | SB31 ADD=B9h | SB29 ADD=BBh |
| I-LIS2MDL (U7) | ENGEZA =3Ch | ENGEZA =3Ch |
| I-SHT40AD1B (U10) | ENGEZA= 89h | ENGEZA= 89h |
| I-adaptha ye-DIL24 (J1) | I-SB43/SB44 | I-SB41/SB42 |
| I-LSM6DSV16X (U4) | SB17 ADD=D5h | SB15 ADD=D7h |
3.4 Isilinganiso sokusetshenziswa kwamanje kwenzwa
Ibhodi lokunweba le-X-NUCLEO-IKS4A1 lifakwe izinqamuleli NOMA ezivumela ukulinganiswa kokusetshenziswa kwamanje okuhlukile kwenzwa ngayinye.
Ukuze ulinganise ukusetshenziswa kwamanje, xhuma i-ammeter kumaphedi afanelekile.
Njengoba izinzwa zinokusetshenziswa kwamanje okuphansi kakhulu, kufanele usethe ububanzi obufanele futhi usebenzise i-ammeter enomthwalo ophansi wevolumutage.
Ithebula 2. Ama-resistors/ama-jumpers wokulinganisa ukusetshenziswa kwamanje
| Inzwa | I-Resistor/Jumper |
| I-LIS2MDL (U7) | R18 |
| I-LSM6DSO16IS (U9) | R21 |
| I-SHT40AD1B (U10) | R22 |
| I-LIS2DUXS12 (U5) | R16 |
| I-STTS22H (U8) | R19 |
| I-LPS22DF (U6) | R32 |
| I-adaptha ye-DIL24 (J1) | JP5 |
| I-LSM6DSV16X | R33 |
3.5 Ukunqanyulwa kwenzwa
Ukuze unqamule inzwa, kufanele unqamule ibhasi le-I²C kanye nokunikezwa kwamandla. Bheka ithebula elingezansi ukuze uthole ama-jumpers namabhuloho adayisayo.
Ithebula 3. Isixhumanisi phakathi kwezinzwa, ama-jumpers kanye namabhuloho e-I²C e-solder
| Inzwa | I-SDA | I-SCL |
| I-LIS2MDL (U7) | SB30 | SB26 |
| I-LSM6DSO16IS (U9) | SB38 | SB36 |
| I-SHT40AD1B (U10) | SB39 | SB37 |
| I-LIS2DUXS12 (U5) | SB22 | SB16 |
| I-STTS22H (U8) | SB33 | SB32 |
| I-LPS22DF (U6) | SB28 | SB25 |
| I-adaptha ye-DIL24 (J1) | SB47, SB49, SB48 | SB51, SB53, SB52 |
| I-LSM6DSV16X | SB21 | SB18 |
3.6 Ibhodi le-adaptha yesokhethi ye-DIL24
Inzwa eyengeziwe ingaxhunywa njengebhodi ye-adaptha kusokhethi ye-J6 DIL24.
Njengoba kunezabelo zesignali ezimbalwa ezihlukene zokuphazamisa zamaphinikhodi e-DIL24, iphinikhodi efanelekile ingakhethwa kusetshenziswa.
unhlokweni J2.
Izixhumanisi ezihlobene
Sicela uvakashele i-ST webindawo yokuthola ezinye izinzwa ezitholakalayo
3.7 Izixhumi
Ithebula 4. Izixhumi ze-Arduino R3 UNO
| Isixhumi | Uphayi(1) | Isiginali |
| CN5 | 7 | GND |
| 9 | I-PC SDA | |
| 10 | I-PC SCL | |
| CN6 | 2 | 3.3 V |
| 4 | 3.3 V | |
| 6 | GND | |
| 7 | GND | |
| 8 | I-NC[FT1] | |
| CN8 | 3 | I-LIS2MDL DRDY |
| 4 | Idatha ye-LIS2DUXS12 INT | |
| 5 | Idatha ye-STTS22H INT | |
| 6 | Idatha ye-LSM6DS0161S INT1 | |
| CN9 | 3 | USER INT |
| 4 | I-SPI CLK | |
| 5 | Idatha ye-LSM6DSV16X INT2 | |
| 6 | Idatha ye-LSM6DSV16X INT1 | |
| 7 | Idatha ye-LPS22DF INT1 | |
| 8 | Idatha ye-LSM6DS0161S INT2 |
- Izikhonkwane ezingafakwanga ohlwini azixhunyiwe.
Ithebula 5. Izixhumi ze-ST morpho
| Isixhumi | Iphinikhodi(1) | Isiginali |
| CN7 | 12 | 3.3 V |
| 16 | 3.3 V | |
| 20 | GND | |
| 22 | GND | |
| 32 | I-LIS2MDL DRDY | |
| 34 | Idatha ye-LIS2DUXS12 INT | |
| 36 | Idatha ye-STTS22H INT | |
| 38 | Idatha ye-LSM6DSO16IS INT1 | |
| CN10 | 3 | I²C SCL |
| 5 | I²C SDA | |
| 23 | Idatha ye-LSM6DSO16IS INT2 | |
| 25 | Idatha ye-LPS22DF INT1 | |
| 27 | Idatha ye-LSM6DSV16X INT1 | |
| 29 | Idatha ye-LSM6DSV16X INT2 | |
| 31 | I-SPI CLK | |
| 33 | USER INT |
- izikhonkwane ezingafakwanga ohlwini azixhunyiwe.
Imidwebo yohlelo
Umthethosivivinywa wezinto zokwakha
Ithebula 6. Ibhili ye-X-NUCLEO-IKS4A1 yezinto zokwakha
| Into | Ubuningi | Ireferensi | Ingxenye / inani | Incazelo | Umkhiqizi | Inombolo yengxenye |
| 1 | 2 | C23, C25 | 220pF | I-Multilayer Ceramic Ama-Capacitors angu-220pF ±5% 100V COG SMD 0402 |
I-TDK | C1005C0G2A221J050BA |
| 2 | 6 | I-C2, C4, I-C10, C12, C14, C20 |
10uF | CAP CER 0603 10uF 6.3V X5R 20% |
Walsin | Idatha ye-0603X106M6R3CT |
| 3 | 12 | I-C3, C5, I-C6, C7, I-C8, C9, I-C11, C13, I-C15, C16, I-C17, C18, C21, C22 |
100nF | CAP CER 0603 100nF 25V X7R 10% |
I-MULTICOMP | I-MC06038104K250 CT |
| 4 | 1 | C19 | 220nF | CAP CER 0603 220nF 25V X7R 10% |
I-KEMET | I-C0603X224K4RACTU |
| 5 | 1 | CN5 | 1×10 Iphinikhodi iphakanyisiwe | isisekelo I-Samtec |
ESQ-110-24-TS - |
|
| 6 | 2 | I-CN9, CN6 | 1×8 Iphinikhodi iphakanyisiwe isisekelo |
I-Samtec | ESQ-108-24-TS | |
| 7 | 1 | CN8 | 1×6 Iphinikhodi iphakanyisiwe isisekelo |
I-Samtec | ESQ-106-24-TS | |
| 8 | 2 | D1, D2 | I-SOD-882 | Trans Voltage I-Suppressor Diode, i-40W, i-Bidirectional, i-Element engu-1, i-Silicon |
I-STMicroelectronics | ESDAXLC6-1BT2 |
| 9 | 1 | J1 | Unhlokweni 4 | I-MULTICOMP | 2211 S-04G | |
| 10 | 1 | J2 | 16 Isikhundla, Okubili - Umugqa, Oguquliwe I-Terminal Strip, i-pitch engu-2mm |
I-Adam Tech | 2PH2-16-UA | |
| 11 | 1 | J3 | 12 Isikhundla, Okubili - Umugqa, Oguquliwe I-Terminal Strip, i-pitch engu-2mm |
I-Samtec | SHF-106-01-LD-SM | |
| 12 | 2 | j4, uj5 | 12 Isikhundla, Okubili - Umugqa, Oguquliwe I-Terminal Strip, i-pitch engu-2mm |
I-Adam Tech | 2PH2-12-UA | |
| 13 | 1 | J6 | I-adaptha ye-DIL24 | I-E-TEC | 2BL1-036-G-700-01 | |
| 14 | 5 | I-JP1, JP2, I-JP5, JP6, JP7 |
Unhlokweni 3 | I-MULTICOMP | 2211S-03G | |
| 15 | 2 | I-JP3, i-JP4 | Unhlokweni 1×2 izikhonkwane, 2.54mm, iqondile |
I-MULTICOMP | 2211S-02G | |
| 16 | 2 | I-QVAR1, QVAR2 |
Unhlokweni_3pin_SMD | I-GCT | BG125-03-A-1-1-0440-ND | |
| 17 | 15 | R1, R2, R9, R10, R11, R12, R13, R14, R15, R23, R24, R25, R28, R29, R34 |
4k7 | RES 0603 4k7 1% 1/16W, RESISTOR |
I-YAGEO | I-RC0603FR-074K7L |
| 18 | 1 | R3 | 15k | I-RES 0603 12k 1% 1/16W, RESISTOR |
I-YAGEO | I-RC0603FR-1315KL |
| 19 | 1 | R4 | 12k | I-RES 0603 0R0 1% 1/16W |
I-YAGEO | I-RC0603FR-1312KL |
| 20 | 9 | R32, R33, R16, R17, R18, R19, R20, R21, R22 |
0R | RES 0603 2k2 1% 1/16W |
I-YAGEO | I-RC0603FR-070RL |
| 21 | 2 | R26, R27 | 2k2 | Ifilimu ye-RES Thick, 10MΩ, 1%, 0.1W, 100ppm/°C, 0603 |
I-YAGEO | I-RC0603FR-132K2L |
| 22 | 4 | R5, R6, R7, R8 |
10M | I-RES 0603 0R0 1% 1/16W |
I-YAGEO | Idatha ye-RC0603FR-0710ML |
| 23 | 40 | SB1, SB2, SB4, SB5, SB6, SB7, SB8, SB9, SB10, SB11, SB12, SB14, SB15, SB16, SB18, SB20, SB21, SB22, SB23, SB24, SB25, SB26, SB27, SB28, SB29, SB30, SB32, SB33, SB35, SB36, SB37, SB38, SB39, SB40, SB42, SB44, SB47, SB51, SB55, SB56 |
0R | I-YAGEO | I-RC0603FR-070RL | |
| 24 | 1 | U1 | I-SOT23-5L | I-LDO Voltage Izilawuli 300mA Okupholile Okuphansi Umsindo ophansi I-LDO |
I-STMicroelectronics | I-LDK130M-R |
| 25 | 2 | u2, u3 | I-IC TRANSLATOR UKUDLULA NGOKWENZA Idatha ye-20VQFN |
I-Nexperia | I-NXS0108BQX | |
| 26 | 1 | U4 | VFLGA2.5X3X.86 14L P.5 L.475X.25 |
I-6-axis IMU ene-sensor fusion eshumekiwe, i-AI, i-Qvar ye izicelo eziphezulu |
I-STMicroelectronics | Idatha ye-LSM6DSV16XTR |
| 27 | 1 | U5 | I-LGA 2X2X0.74MAX 12 AMAHOLI |
I-ultra-low-power 3axis ehlakaniphile i-accelerometer eshumekiwe umshini wokufunda core kanye isihlungi se-antialiasing |
I-STMicroelectronics | Idatha ye-LIS2DUXS12TR |
| 28 | 1 | U6 | I-HLGA 2X2X.8 10L EXP. I-SILIC .91SQ |
Amandla aphansi nokunemba okuphezulu Inzwa ye-MEMS nano pressure: 260-1260 hPa |
I-STMicroelectronics | Idatha ye-LPS22DFTR |
| 29 | 1 | U7 | I-LGA 2×2 12L | Amandla aphansi kakhulu, imagnetometer ye-axis engu-3 esebenza kakhulu | I-STMicroelectronics | I-LIS2MDLTR |
| 30 | 1 | U8 | UDFN-6L_2X2X0P5_STM | Okuphansi voltage, amandla aphansi kakhulu, izinga lokushisa lokunemba elingu-0.5 °C inzwa |
I-STMicroelectronics | Idatha ye-STTS22HTR |
| 31 | 1 | U9 | VFLGA2.5X3X.86 14L P.5 L.475X.25 |
3-eksisi accelerometer kanye I-gyroscope engu-3-axis ene-ISPU |
I-STMicroelectronics | Idatha ye-LSM6DSO16ISTR |
| 32 | 1 | U10 | I-Digital Relative Humidity Inzwa Yezinga lokushisa, ±1.8 / ubuningi 3.5 %RH, ±0.2 °C, UltraLow-Power |
I-Sensirion | I-SHT40-AD1B-R3 |
Izinguqulo zekhithi
Ithebula 7. X-NUCLEO-IKS4A1 izinguqulo
| Iqede kahle | Imidwebo yohlelo | Umthethosivivinywa wezinto zokwakha |
| I-X$NUCLEO-IKS4A1A(1) | X$NUCLEO-IKS4A1A imidwebo yeskimu | X$NUCLEOIKS4A1A ibhili lezinto zokwakha |
- Le khodi ikhomba inguqulo yokuqala yekhithi yokuhlola ye-X-NUCLEO-IKS4A1. Ikhithi iqukethe ibhodi elikhulu i-X-NUCLEOIQS4A1 inguqulo yalo ekhonjwa ngekhodi X$NUCLEO-IQS4A1A kanye nebhodi elikhiphekayo STEVAL-MKE001A inguqulo yalo ekhonjwa ngekhodi ethi STEVAL$MKE001AA.
Ulwazi lokuthobela imithetho
Isaziso se-US Federal Communication Commission (FCC)
Okokuhlola kuphela; ayigunyaziwe i-FCC ukuthi ithengiswe kabusha
I-FCC ISAZISO - Le kit yakhelwe ukuvumela:
- Abathuthukisi bomkhiqizo bazohlola izingxenye ze-elekthronikhi, izifunda, noma isofthiwe ehlotshaniswa nekhithi ukuze banqume ukuthi bazifake yini izinto ezinjalo emkhiqizweni osuphelile futhi
- Abathuthukisi be-software ukubhala izinhlelo zokusebenza zesofthiwe ukuze zisetshenziswe nomkhiqizo wokugcina.
Le khithi akuwona umkhiqizo oqediwe futhi uma isihlanganisiwe akumele ithengiswe kabusha noma imakethwe ngaphandle uma kutholwe konke ukugunyazwa kwempahla ye-FCC. Ukusebenza kungaphansi kwesimo sokuthi lo mkhiqizo ungabangeli ukuphazamiseka okuyingozi eziteshini zomsakazo ezinelayisensi nokuthi lo mkhiqizo wamukele ukuphazamiseka okuyingozi. Ngaphandle uma ikhithi ehlanganisiwe iklanyelwe ukusebenza ngaphansi kwengxenye 15, ingxenye 18 noma ingxenye 95 yalesi sahluko, isisebenzisi sekhithi kufanele sisebenze ngaphansi kwegunya lomnikazi welayisensi ye-FCC noma kufanele aqinisekise ukugunyazwa kokuhlolwa ngaphansi kwengxenye 5 yalesi sahluko 3.1.2. XNUMX.
Isaziso Sokusungula, Isayensi Nokuthuthukiswa Komnotho e-Canada (IED)
Ngezinjongo zokuhlola kuphela. Le khithi ikhiqiza, isebenzisa, futhi ingasakaza amandla efrikhwensi yomsakazo futhi ayizange ihlolelwe ukuhambisana nemikhawulo yamadivayisi ekhompyutha ngokulandela imithetho ye-Industrial Canada (IC).
Isaziso se-European Union
Le divayisi ihambisana nezidingo ezibalulekile ze-Directive 2014/30/EU (EMC) kanye ne-Directive 2015/863/EU (RoHS).
Isaziso sase-United Kingdom
Le divayisi ithobelana ne-UK Electromagnetic Compatibility Regulations 2016 (UK SI 2016 No. 1091) kanye Nomkhawulo Wokusetshenziswa Kwezinto Ezithile Eziyingozi Kumithetho Yezinto Zisetshenziswa Zikagesi kanye Nezogesi 2012 (UK SI 2012 No. 3032).
Umlando wokubuyekeza
Ithebula 8. Umlando wokubuyekeza idokhumenti
| Usuku | Inguqulo | Izinguquko |
| 11-Oct-23 | 1 | Ukukhishwa kokuqala. |
ISAZISO ESIBALULEKILE – FUNDA NGOKUQAPHELA
I-STMicroelectronics NV nezinkampani ezingaphansi kwayo (“ST”) igodla ilungelo lokwenza izinguquko, ukulungisa, izithuthukisi, ukuguqulwa, nokuthuthukiswa kwemikhiqizo ye-ST kanye/noma kulo mbhalo nganoma yisiphi isikhathi ngaphandle kwesaziso. Abathengi kufanele bathole ulwazi lwakamuva olufanele ngemikhiqizo ye-ST ngaphambi kokufaka ama-oda. Imikhiqizo ye-ST ithengiswa ngokulandela imigomo nemibandela ye-ST yokuthengisa ekhona ngesikhathi sokuvunywa kwe-oda.
Abathengi banomthwalo wemfanelo kuphela ekukhetheni, ekukhethweni, nasekusetshenzisweni kwemikhiqizo ye-ST futhi i-ST ayithathi sikweletu sosizo lwesicelo noma idizayini yemikhiqizo yabathengi.
Ayikho ilayisensi, eshiwo noma eshiwoyo, kunoma yiliphi ilungelo lempahla yengqondo elinikezwa i-ST lapha.
Ukudayiswa kabusha kwemikhiqizo ye-ST nezinhlinzeko ezihlukile kulwazi olubekwe lapha kuzovala noma yisiphi isiqinisekiso esinikezwe i-ST salowo mkhiqizo.
Ilogo ye-ST kanye ne-ST yizimpawu zokuthengisa ze-ST. Ukuze uthole ulwazi olwengeziwe mayelana nezimpawu zokuthengisa ze-ST, bheka ku-www.st.com/trademarks. Wonke amanye amagama omkhiqizo noma wesevisi ayimpahla yabanikazi abafanele.
Ulwazi olukule dokhumenti luthatha indawo futhi luthatha indawo yolwazi olwalunikezwe ngaphambilini kunoma yiziphi izinguqulo zangaphambili zalo mbhalo.
© 2023 STMicroelectronics – Wonke amalungelo agodliwe
UM3239 - Rev 1
Amadokhumenti / Izinsiza
 |
I-STMicroelectronics UM3239 Mems Motion and Environmental Sensor Expansion Board [pdf] Imaniwali yosebenzisayo I-X-NUCLEO-IQS4A1, LSM6DSO16IS, LSM6DSV16X, UM3239, UM3239 Ibhodi Lokunweba Izinzwa Zemvelo, Ibhodi Lokunweba Izinzwa Zemvelo, Ibhodi Lokunweba Izinzwa Zemvelo, Ibhodi Lokunweba Ibhodi Lenzwa, Ibhodi Lokunweba Inzwa Yendawo |
