Okuqukethwe fihla
1 I-STMicroelectronics UM2406 I-RF-Flasher Utility Software Package
2 Imiyalo yokusetshenziswa komkhiqizo
3 Isingeniso
4 ulwazi oluvamile
5 Ukuqalisa
6 Ibha yamathuluzi
7 Iwindi elikhulu le-SWD
8 Uhlelo lwekheli le-MAC
9 Isiqalisi se-RF-Flasher
10 Umlando wokubuyekeza
11 Amadokhumenti / Izinsiza
11.1 Izithenjwa
12 Okuthunyelwe Okuhlobene

I-STMicroelectronics-LOGO

I-STMicroelectronics UM2406 I-RF-Flasher Utility Software Package

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package-PRODUCT

Imininingwane

  • Isekela i-BlueNRG-LP, i-BlueNRG-LPS, i-BlueNRG-1, namadivayisi we-BlueNRG-2
  • Isixhumi esibonakalayo: Imodi ye-UART nemodi ye-SWD
  • Izici: Uhlelo lwenkumbulo ye-Flash, ukufunda, ukusula ngobuningi, ukuqinisekiswa kokuqukethwe
  • Izidingo Zesistimu: 2 GB we-RAM, izimbobo ze-USB, i-Adobe Acrobat Reader 6.0 noma kamuva

Imiyalo yokusetshenziswa komkhiqizo

Ukuqalisa
Lesi sigaba sihlinzeka ngolwazi ngezidingo zesistimu kanye nokusethwa kwephakheji yesofthiwe.

Izidingo zesistimu:

  • Okungenani u-2 GB we-RAM
  • Izimbobo ze-USB
  • I-Adobe Acrobat Reader 6.0 noma kamuva
  • Isikali sokubonisa esinconyiwe nezilungiselelo ezifika ku-150%

Ukusethwa Kwephakheji Yesofthiwe:
Ukuze uqalise insiza, chofoza isithonjana sesevisi ye-RF-Flasher esitholakala kokuthi [Qala] > [ST RF-Flasher Utility xxx] > [RFFlasher Utility].

Ibha yamathuluzi
Esigabeni sebha yamathuluzi ewindini elikhulu lensiza ye-RF-Flasher, abasebenzisi bangenza imisebenzi elandelayo:

  • Layisha i-.bin noma .hex ekhona file: [File] > [Vula file…]
  • Londoloza isithombe samanje sememori: [File] > [Gcina File Njengoba…]
  • Vala i-.bin noma .hex ekhona file: [File] > [Vala file]
  • Setha imvamisa ye-ST-LINK: [Amathuluzi] > [Izilungiselelo...]
  • Nika amandla noma vala ilogi file ukudala: [Amathuluzi] > [Izilungiselelo...]

FAQ

  • Imaphi amadivaysi asekelwa iphakethe lesoftware ye-RF-Flasher?
    Iphakheji yesofthiwe okwamanje isekela i-BlueNRG-LP, i-BlueNRG-LPS, i-BlueNRG-1, namadivayisi we-BlueNRG-2.
  • Yiziphi izimfuneko zesistimu eziphansi ukuze usebenzise i-RF-Flasher?
    Izidingo eziyisisekelo zesistimu zifaka okungenani u-2 GB we-RAM, izimbobo ze-USB, ne-Adobe Acrobat Reader 6.0 noma kamuva.
  • Ngingasigcina kanjani isithombe sememori yamanje kusisetshenziswa se-RF-Flasher?
    Ukugcina isithombe sememori yamanje, yiya ku-[File] > [Gcina File Njenge…] bese ukhetha ingxenye yememori ezogcinwa ku-.bin file.

UM2406
Imaniwali yosebenzisayo

Iphakeji yesoftware ye-RF-Flasher

Isingeniso

Lo mbhalo uchaza iphakheji yesofthiwe ye-RF-Flasher yensiza (STSW-BNRGFLASHER), ehlanganisa uhlelo lokusebenza lwe-PC yensiza ye-RF-Flasher.
I-RF-Flasher utility iyi-PC application ezimele, evumela i-BlueNRG-1, BlueNRG-2, BlueNRG-LP, kanye ne-BlueNRG-LPS Bluetooth® Low Energy systems-on-chip memory memory ukuthi ifundwe, isulwe ngobuningi, ibhalwe, futhi zahlelwa.
Njengamanje isekela isixhumi esibonakalayo se-BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ne-BlueNRG-2 flash memory ngemodi ye-UART isebenzisa i-UART bootloader yedivayisi yangaphakathi. Iphinde futhi isekele isixhumi esibonakalayo se-BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, kanye ne-BlueNRG-2 flash memory ngokusebenzisa imodi ye-SWD ngokusebenzisa isixhumi esibonakalayo se-SWD esijwayelekile ngamathuluzi ajwayelekile wokuhlela/wokulungisa amaphutha (CMSIS-DAP, ST-LINK , kanye ne-J-Link).
Ngaphezu kwalokho, iphinde ivumele ikheli le-MAC ukuthi ligcinwe endaweni ethile yenkumbulo ye-flash ekhethwe ngumsebenzisi kuzo zombili izindlela ze-UART ne-SWD.
Iphakheji yesofthiwe ye-RF-Flasher iphinde ihlinzeke ngesiqalisi sokukhanyisa esizimele, esivumela ukuhlelwa kwememori ye-flash, ukufundwa, ukusula okukhulu, nokuqinisekiswa kokuqukethwe. Isiqalisi se-flasher sidinga iwindi le-PC DOS kuphela.

Qaphela:
Igama le-RF okwamanje libhekisela kumadivayisi e-BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, kanye ne-BlueNRG-2. Noma yimuphi umehluko othize uyagqanyiswa lapho kudingeka.

ulwazi oluvamile

Uhlu lwama-akhronimi

Ithebula 1. Uhlu lwama-akhronimi

Ithemu Incazelo
RF Imvamisa yomsakazo
I-SWD I-serial wire debug
UART I-Universal asynchronous receiver-transmitter
I-USB Ibhasi lochungechunge lwe-Universal

Amadokhumenti ayisethenjwa

Ithebula 2. Imibhalo eyinkomba

Ireferensi Uhlobo Isihloko
I-DS11481 Idatha ye-BlueNRG-1 I-Bluetooth® Low Energy wireless SoC ehlelekayo
I-DS12166 Idatha ye-BlueNRG-2 I-Bluetooth® Low Energy wireless SoC ehlelekayo
DB3557 STSW-BNRGFLASHER idatha kafushane Imininingwane yephakheji yesofthiwe ye-RF-Flasher
I-DS13282 Idatha ye-BlueNRG-LP I-Bluetooth® Low Energy wireless SoC ehlelekayo
I-DS13819 Idatha ye-BlueNRG-LPS I-Bluetooth® Low Energy wireless SoC ehlelekayo

Ukuqalisa

Lesi sigaba sichaza zonke izidingo zohlelo ukuze kuqhutshekwe ne-RF-Flasher utility PC application kanye nenqubo yokufaka iphakheji yesofthiwe ehlobene.

Izidingo zesistimu
Insiza ye-RF-Flasher inezidingo ezincane ezilandelayo:

  • I-PC ene-Intel® noma i-AMD processor esebenzisa isistimu yokusebenza ye-Microsoft® elandelayo:
    • I-Windows® 10
  • Okungenani u-2 GB we-RAM
  • Izimbobo ze-USB
  • I-Adobe Acrobat Reader 6.0 noma kamuva
  • Isikali sokubonisa esinconyiwe nezilungiselelo zifika ku-150%.

Ukusethwa kwephakheji yesofthiwe
Umsebenzisi angaqalisa lolu hlelo lokusebenza ngokuchofoza isithonjana sensiza ye-RF-Flasher ([Qala]>[ST RF-Flasher Utility xxx]>[RF-Flasher Utility]).

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (1)

Ibha yamathuluzi

Esigabeni sebha yamathuluzi ewindini elikhulu lensiza ye-RF-Flasher, umsebenzisi angenza imisebenzi elandelayo:

  • Layisha i-.bin noma i-.hex ekhona (Intel inwetshiwe) file, usebenzisa [File]>[Vula file…]
  • Londoloza isithombe sememori yamanje ku-.bin file, usebenzisa [File]>[Gcina File Njengoba…]. Ikheli lokuqala kanye nosayizi wengxenye yememori ezogcinwa ku file ziyakhetheka kuthebhu Yenkumbulo Yedivayisi.
  • Vala i-.bin noma .hex ekhona file, usebenzisa [File]>[Vala file]
  • Setha imvamisa ye-ST-LINK, usebenzisa [Amathuluzi]>[Izilungiselelo...]
  • Nika amandla noma vala ilogi file ukudalwa ngendlela ye-UART/SWD, kusetshenziswa [Amathuluzi]>[Izilungiselelo…]. Uma log files zilondoloziwe, kungenzeka ukusetha izinga lolwazi lokususa iphutha ukuze ulondolozwe (ku-SWD kuphela). Wonke amalogi files zilondolozwe ku-{insta llation path}\ST\RF-Flasher Utility xxx\Logs\.
  • Sula ngobuningi, kusetshenziswa okuthi [Amathuluzi]>[Sula ngobuningi].
  • Qinisekisa okuqukethwe kwenkumbulo ekhanyayo [Amathuluzi]>[Qinisekisa okuqukethwe kwe-flash].
  • Thola inguqulo yohlelo lokusebenza, usebenzisa [Usizo]>[Mayelana].
  • Landa a file, usebenzisa [Amathuluzi]>[I-Flash].
  • Sula imikhakha yedivayisi, usebenzisa [Amathuluzi]>[Sula Amakhasi...]
  • Qhathanisa imemori yedivayisi nesithombe esikhethiwe file, usebenzisa [Amathuluzi]>[Qhathanisa Inkumbulo Yedivayisi ne file]. Izithombe ezimbili files aboniswa kokuthi Qhathanisa Inkumbulo Yedivayisi Nesithombe File ithebhu kanye nomehluko ohlobene ugqanyiswe ngokubomvu.
  • Qhathanisa okubili files, usebenzisa [File]>[Qhathanisa okubili files]
  • Funda umkhakha we-bootloader (ngemodi ye-SWD kuphela), usebenzisa [Amathuluzi]>[Funda Umkhakha We-Bootloader (SWD)].
  • Funda indawo ye-OTP (ngemodi ye-SWD kuphela), usebenzisa [Amathuluzi]>[Funda Indawo ye-OTP (SWD)].
  • Londoloza imikhakha ye-bootloader noma indawo ye-OTP ku-.bin file, usebenzisa [File]>[Gcina File Njengoba…].

Umsebenzisi angaphinda akhethe izithombe ezimbili files futhi uziqhathanise. Izithombe ezimbili files aboniswa kokuthi Qhathanisa Okubili Files kanye nomehluko ohlobene kugqanyiswe ngokubomvu. .bin kanye ne-.hex file amafomethi asekelwa.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (2)

Esigabeni esingenhla sewindi eliyinhloko lensiza ye-RF-Flasher, umsebenzisi angakhetha isithombe file ngokusebenzisa [Khetha Isithombe File] inkinobho. Umsebenzisi angakhetha uhlobo lwenkumbulo: inkumbulo ye-flash, i-bootloader, noma indawo ye-OTP. Endaweni yenkumbulo ye-flash, umsebenzisi angasetha ikheli lokuqala (lomgqomo kuphela file)
Zonke lezi zinketho zitholakala kumodi ye-UART ne-SWD.
Umsebenzisi udinga ukunika amandla ukufinyelela kumodi ekhethiwe (i-UART noma i-SWD). Lokhu bangakwenza ngokuvula imbobo ye-COM ehlobene yemodi ye-UART, noma ngokuxhuma ithuluzi le-SWD hardware lokuhlela/lokulungisa iphutha emigqeni yedivayisi ye-SWD.

Iwindi elikhulu le-UART
Kuthebhu yefasitela elikhulu le-UART lewindi eliyinhloko lensiza ye-RF-Flasher, umsebenzisi angakhetha imbobo ye-COM ezosetshenziselwa ukuxhumana nedivayisi ngesigaba sohlu Lwezimbobo ze-COM.
Izinga le-serial baud elisetshenziselwa ibhodi lokuhlola idivayisi ye-RF ngu-460800 bps.
I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (3)

Imodi ye-UART: isetshenziswa kanjani
Isithombe file ukukhetha
Ukulayisha i-.bin noma i-.hex ekhona file, sebenzisa i-[Khetha Isithombe File] inkinobho ekhasini eliyinhloko, zulazula uye ku- [File]>[Vula File…], noma vakashela Isithombe File ithebhu. Umzila ogcwele wabakhethiwe file ivela eduze kwenkinobho futhi inkinobho ye-[Flash] iqala ukusebenza uma i file ilayishile.
Ithebhu yohlu lwezimbobo ze-COM ibonisa wonke amadivayisi axhunyiwe kumachweba we-PC USB. Izinkinobho ezithi [Khetha Konke], [Susa Ukukhetha Konke], kanye nethi [Guqula Konke] zivumela umsebenzisi ukuthi achaze ukuthi imaphi amadivayisi axhunyiwe (wonke, awekho, noma amanye) okufanele abe yimpokophelo yemisebenzi yensiza. Ngale ndlela, ukusebenza okufanayo (okungukuthi, i-flash memory programming) kungenziwa ngesikhathi esisodwa kumadivayisi amaningi. Inkinobho ethi [Vuselela] ivumela umsebenzisi ukuthi avuselele uhlu lwamadivayisi axhunyiwe.
Ngokuzenzakalelayo, inketho [Yokusula ngobuningi] esigabeni esithi [Izenzo] ayihloliwe, futhi amakhasi enkumbulo adingekayo kuphela asulwayo futhi abhalwe nge- file okuqukethwe. Uma le nketho ihloliwe, ukusula okugcwele okugcwele kwandulela isigaba sokuhlela inkumbulo ye-flash.
Inketho ethi [Qinisekisa] iphoqa ukuhlola ukuze kuqinisekiswe ukuthi okuqukethwe yinkumbulo kubhalwe ngendlela efanele.
Hlola inketho ethi [Buyekeza Imemori Yedivayisi] ukuze ubuyekeze ithebula lememori yedivayisi ngemva kokusebenza kumemori ye-flash.
Inketho yokuvikela ukufunda inika amandla ukuvikeleka kokufunda kocingo ngemuva kokuhlelwa kwememori ye-flash.
Hlola inketho ye-[I-Auto Baudrate] kuphela uma ukusethwa kabusha kwehadiwe kwenziwa ebhodini ukuze kuphoqe ukusebenza kwe-[I-Auto Baudrate]. Ngokuzenzakalelayo, inketho ye-[I-Auto Baudrate] ayihloliwe.

Isithombe File ithebhu
Okukhethiwe file Igama, usayizi, nokuqukethwe okucutshunguliwe okuzohlelwa kwimemori ye-flash yedivayisi kungaba viewed esithombeni File ithebhu.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (4)

Ithebhu Yenkumbulo Yedivayisi
Khetha le thebhu ukuze view okuqukethwe yinkumbulo yedivayisi exhunyiwe (ngenkinobho ethi [Funda]) kanye nelogi equkethe imisebenzi eyenziwa kudivayisi ekhethiwe.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (5)

Chofoza inkinobho ethi [Funda] ukuze udlulisele ingxenye yenkumbulo echazwe [Ikheli Lokuqala Nosayizi] etafuleni.
Ukuze ufunde yonke imemori ye-flash, hlola inketho ethi [Inkumbulo Yonke].
Ikholomu yokuqala inikeza ikheli lesisekelo lamabhayithi angu-16 alandelayo emugqeni (ngokwesiboneloampi-le, irowu 0x10040050, ikholomu 4 iphethe inani le-hexadecimal byte kokuthi 0x10040054. Umsebenzisi angashintsha amanani ebhayithi ngokuchofoza kabili iseli futhi afake inani elisha le-hexadecimal. Amabhayithi ahleliwe avela ngokubomvu.
Chofoza inkinobho ethi [Bhala] ukuze uhlele ikhasi lonke ngamavelu e-byte amasha kumemori ye-flash yedivayisi.
Inkinobho ye-[Flash] ivumela umsebenzi wokuhlela inkumbulo ekhanyayo ukuqala ngenketho ekhethiwe. Uma [Ikheli le-MAC] lithikhiwe, umsebenzisi angacacisa ikheli lememori lapho kugcinwa khona ikheli le-MAC elikhethiwe. Uma inkinobho ye-[Flash] ichofozwa, ikheli le-MAC lihlelwa ngemva kwesithombe file.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (6)

Qhathanisa Inkumbulo Yedivayisi Nesithombe File ithebhu
Umsebenzisi angaqhathanisa imemori yedivayisi yamanje nesithombe esikhethiwe file. Izithombe ezimbili files ayaboniswa futhi noma yimuphi umehluko ugqanyiswe ngokubomvu. .bin kanye ne-.hex files ifomethi iyasekelwa.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (6) Ukusebenzisa i-RF-Flasher utility namanye amabhodi
I-RF-Flasher ithola ngokuzenzakalelayo amabhodi okuhlola e-BlueNRG-1, BlueNRG-2, BlueNRG-LP, ne-BlueNRG-LPS (avezwe njenge-STDK) axhunywe kumachweba we-PC USB. Isebenzisa i-STM32 eyisizayo (eshayelwa i-GUI) ukuze usethe kabusha idivayisi futhi uyibeke kumodi ye-UART bootloader.
Uhlelo lokusebenza luphinde lusebenze namabhodi wangokwezifiso, lunikeza ukufinyelela okulula kwe-UART kudivayisi exhunyiwe, kodwa umsebenzisi kufanele abeke idivayisi kumodi ye-bootloader ngesandla. Ekukhethweni kwanoma yiziphi izimbobo ze-non-STEVAL COM, kuvela okulandelayo:

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (8)

Uma lokhu kuvela futhi kuye ngohlobo lwedivayisi, imodi ye-bootloader yenziwa isebenze kanje:

  • Kumadivayisi e-BlueNRG-LP kanye ne-BlueNRG-LPS, umsebenzisi kufanele asethe iphinikhodi ye-PA10 enanini eliphezulu futhi enze umjikelezo wokusetha kabusha idivayisi (ukugcina i-PA10 inenani eliphezulu).
  • Kumadivayisi e-BlueNRG-1 kanye ne-BlueNRG-2, umsebenzisi kufanele asethe iphinikhodi ye-DIO7 enanini eliphezulu futhi asethe kabusha idivayisi (ukugcina i-DIO7 inenani eliphezulu).

Umsebenzisi angasetha nesilinganiso se-baud esithandwayo se-UART efasiteleni le-pop-up bese ucindezela KULUNGILE ukuze ubuyele ku-GUI.

Qaphela:
Umsebenzisi kufanele agweme ukusetha kabusha idivayisi ngenkathi esebenzisa insiza ye-RF-Flasher, ngaphandle uma i-pop-up ye-ComPort Setting isebenza. Uma idivayisi isethwe kabusha, umsebenzisi kufanele aguqule imbobo ye-COM ukuze asebenzise insiza ye-Flasher futhi.

Qaphela:
Uma amabhodi ngokwezifiso asetshenziswa ngokunikeza ukufinyelela kwe-UART kumadivayisi e-BlueNRG-1, BlueNRG-2, BlueNRG-LP, kanye ne-BlueNRG-LPS ngesixhumi esibonakalayo se-USB FTDI, umsebenzisi kufanele ahlole kabili ukubambezeleka okuhlobene nomshayeli we-PC FTDI PC. Lokhu kuvumela imbobo exhunyiwe ukuthi ibonwe njenge-USB virtual COM. Kumshayeli we-PC we-USB-FTDI ojwayelekile, hlola kabili idivayisi ehlobene izilungiselelo zomshayeli we-USB kokuthi [Properties]>[Imbobo
Izilungiselelo]>[Okuthuthukile]. Qiniseka ukuthi inani lesikhathi sokubambezeleka lisethelwe ku-1 ms. Lokhu kulungiselelwa kunconywa kakhulu ukusheshisa ukusebenza kwememori ye-flash kumabhodi angokwezifiso.

Iwindi elikhulu le-SWD

Ukuze usebenzise ithebhu yewindi elikhulu le-SWD efasiteleni eliyinhloko lensiza ye-RF-Flasher, umsebenzisi kufanele axhume ithuluzi lehadiwe le-SWD lokuhlela/lokulungisa iphutha emigqeni yedivayisi ye-SWD (BlueNRG-1, BlueNRG-2, BlueNRG-LP, kanye namadivayisi we-BlueNRG-LPS ).
Izixhumanisi ezilandelayo zokuhlela/ukulungisa iphutha lezingxenyekazi zekhompuyutha ze-SWD ziyasekelwa, kucatshangwa ukuthi izingxenyekazi zekhompuyutha ezikhethiwe namathuluzi esofthiwe ahlobene asekela idivayisi exhunyiwe:

  1. CMSIS-DAP
  2. ST-LINK
  3. I-J-Link

Qaphela
Ukuze usebenzise i-J-Link njenge-adaptha yokususa iphutha, isishayeli se-USB sidinga ukushintshwa sisuke kumshayeli we-J-Link siye ku-WinUSB. Lokhu kungenziwa kalula ngokusebenzisa ithuluzi elithi HYPERLINK Zadig (https://zadig.akeo.ie) kanje:

  • Khetha i-J-Link ohlwini lwamadivayisi
  • Khetha "WinUSB" njengomshayeli
  • Chofoza okuthi [Faka Umshayeli] ukuze ufake umshayeli we-WinUSB

Qaphela:
Bheka ku-HYPERLINK J-Link OpenOCD webisiza (https://wiki.segger.com/OpenOCD) ukuze uthole ulwazi olwengeziwe.

Qaphela:
ISEXWAYISO: Uma isishayeli se-USB se-J-Link sesishintshiwe, ayikho isofthiwe ye-SEGGER evela kuphakheji yesofthiwe ye-J-Link ekwazi ukuxhumana ne-J-Link. Ukuze usebenzise isofthiwe ye-SEGGER J-Link futhi, umshayeli we-USB udinga ukushintshwa abuyele kokumisiwe kwawo.
I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (8)

Imodi ye-SWD: isebenza kanjani
Isithombe file ukukhetha
Sebenzisa i-[Khetha Isithombe File] inkinobho ekhasini eliyinhloko noma iya kokuthi [File]>[ Vula File…] ukulayisha .bin noma .h ex file. Umzila ogcwele wabakhethiwe file ivela eduze kwenkinobho futhi inkinobho ye-[Flash] iqala ukusebenza ekupheleni kwe file iyalayisha.
Kuthebhu ethi Izenzo, umsebenzisi angakhetha izinketho ezilandelayo:

  • [Qinisekisa]: kuphoqelela ukuhlola ukuze kuqinisekiswe ukuthi okuqukethwe kwememori kubhalwe ngendlela efanele
  • [Ukuvikelwa kokufunda]: kunika amandla ukuvikela kokufunda idivayisi ngemva kokuhlela isithombe esikhethiwe file
  • [Ukusula ngobuningi]: kuvumela ukusula okukhulu kwedivayisi ukuthi kwenziwe ngaphambi kokuhlela isithombe esikhethiwe file
  • [Buyekeza Inkumbulo Yedivayisi]: ivumela ithebula lememori yedivayisi ukuthi libuyekezwe ngemva kokusebenza kokuhlelwa kwememori ye-flash
  • [Imodi ye-Plug&Dlala]: ivumela imodi yokuhlela ye-plug-and-play flash memory ukuthi inikwe amandla/ikhutshazwe uma kutholakala ithuluzi elilodwa lokuhlela le-SWD. Kulokhu, amabhodi ahlelwa eyodwa ngesikhathi. Lapho umsebenzi wokuhlela usuqedile ebhodini elilodwa, kungenzeka ukulikhipha bese uxhuma elinye ibhodi.

Ngokuzenzakalelayo, inketho [Yokusula ngobuningi] eduze kwenkinobho ye-[Flash] ayithikhiwe, futhi amakhasi enkumbulo adingekayo kuphela asulwayo futhi abhalwe nge file okuqukethwe.
Ithebhu [Uhlu lwezindawo ezixhunyiwe] ibonisa zonke izixhumanisi ze-SWD ezixhunyiwe (CMSIS-DAP,ST-LINK, ne-J-Link). Cindezela inkinobho ethi [Vuselela] ukuze ubuyekeze uhlu lwezixhumanisi ezixhunyiwe.
Umsebenzisi angakwazi futhi ukukhetha ukuthi isiphi isixhumi esibonakalayo sezingxenyekazi zekhompuyutha ze-SWD okufanele ziboniswe ngenkambu ye-[I-Interface].
Izinkinobho ezithi [Khetha Konke], [Ungakhethi Konke], kanye nethi [Guqula Konke] zivumela umsebenzisi ukuthi achaze ukuthi iziphi izixhumanisi ze-SWD ezixhunyiwe (zonke, akukho, noma ezinye zazo) okufanele zibe impokophelo yemisebenzi yensiza. Ngale ndlela, ukusebenza okufanayo (okungukuthi, i-flash memory programming) kungenziwa ngesikhathi esisodwa kumadivayisi amaningi.
Inkinobho ye-[Flash] ivumela umsebenzi wokuhlela inkumbulo ekhanyayo ukuqala ngenketho ekhethiwe. Uma [Ikheli le-MAC] lithikhiwe, umsebenzisi angacacisa ikheli lememori lapho kugcinwa khona ikheli le-MAC elikhethiwe. Uma inkinobho ye-[Flash] ichofozwa, ikheli le-MAC lihlelwa ngemva kwesithombe file.
'Isithombe File'ithebhu
Okukhethiwe file Igama, usayizi, nokuqukethwe okucutshunguliwe okuzohlelwa kwimemori ye-flash yedivayisi kungaba viewed esithombeni File ithebhu.

Ithebhu Yenkumbulo Yedivayisi
Khetha le thebhu ukuze view okuqukethwe yinkumbulo yedivayisi exhunyiwe (ngenkinobho ethi [Funda]) kanye nelogi equkethe imisebenzi eyenziwa kudivayisi ekhethiwe.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (10)

Chofoza inkinobho ethi [Funda] ukuze udlulisele ingxenye yenkumbulo echazwe [Ikheli Lokuqala Nosayizi] etafuleni.
Ukuze ufunde yonke imemori ye-flash, hlola inketho ethi [Inkumbulo Yonke].
Ikholomu yokuqala inikeza ikheli lesisekelo lamabhayithi angu-16 alandelayo emugqeni (ngokwesiboneloampi-le, irowu 0x10040050, ikholomu 4 iphethe inani le-hexadecimal byte kokuthi 0x10040054. Umsebenzisi angashintsha amanani ebhayithi ngokuchofoza kabili iseli futhi afake inani elisha le-hexadecimal. Amabhayithi ahleliwe avela ngokubomvu.
Chofoza inkinobho ethi [Bhala] ukuze uhlele ikhasi lonke ngamavelu e-byte amasha kumemori ye-flash yedivayisi.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (11)

Qaphela:
[Qhathanisa Idivayisi Inkumbulo ku File] iphinde isekelwe kumodi ye-SWD, enezici ezifanayo njengoba kuchazwe eSigabeni 4.1: Imodi ye-UART: ukuthi isebenza kanjani.

Imodi ye-SWD: funda umkhakha we-bootloader
Umsebenzisi angakwazi ukufunda umkhakha we-bootloader yedivayisi exhunyiwe ngohlelo lokuhlela lwezingxenyekazi zekhompuyutha ze-SWD ngokukhetha okuthi [Amathuluzi]>[Funda Umkhakha We-Bootloader (SWD)]. Okuqukethwe komkhakha we-bootloader kuboniswa kuthebhu ye-Bootloader/OTP.

Qaphela:
Lesi sici sisekelwa kuphela kumodi ye-SWD futhi sifinyeleleka kuphela nge-GUI.I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (12)

Imodi ye-SWD: funda indawo ye-OTP
Umsebenzisi angafunda indawo ye-OTP exhunywe idivayisi (lapho isekelwa khona) ngohlelo lokuhlela lwezingxenyekazi zekhompuyutha ze-SWD ngokukhetha okuthi [Amathuluzi]>[Funda Indawo ye-OTP (SWD)]. Okuqukethwe kwendawo ye-OTP kuboniswa kuthebhu ye-Bootloader/OTP.
Lesi sici asisekelwe kumodi ye-UART.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (13)

Imodi yokuhlela ye-SWD Plug&Play
Imodi yokuhlela ye-SWD Plug&Play ivumela umsebenzisi ukuthi afake iluphu yezinhlelo ngokuxhuma inkundla yedivayisi entsha ezohlelwa. Lapho isithombe inkumbulo flash file futhi izenzo zokuhlela sezikhethiwe, uhlelo lwe-Flasher PC lucela umsebenzisi ukuthi axhume idivayisi kusixhumi esibonakalayo se-SWD (umlayezo othi Ilinde idivayisi N. 1 uyavezwa).
Lapho umsebenzisi exhuma idivayisi, umlayezo oxhunyiwe weDivaysi N. 1 uyaboniswa, futhi uhlelo lokusebenza luqala ukuhlela idivayisi ngesithombe esikhethiwe. file kanye nezinketho. Uma umsebenzi wokuhlela usuqedile, uhlelo lweFlasher lubonisa umyalezo Sicela unqamule idivayisi N. 1. Uma umsebenzisi enqamula idivayisi, umyalezo othi Ilinde idivayisi N. 2 uyavezwa. Umsebenzisi angamisa le modi ezenzakalelayo ngokucindezela inkinobho ethi [Misa].
Uma usebenzisa imodi ye-Plug&Play, umsebenzisi kufanele akhethe isixhumi esibonakalayo esizosetshenziswa (CMSIS-DAP, ST-LINK, noma i-J-Link).

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (14)

Uhlelo lwekheli le-MAC

Ukuhlelwa kwekheli le-MAC kuvumela ikheli le-MAC ukuthi ligcinwe endaweni ethile yememori ye-flash kudivayisi.
Umsebenzisi angakhetha ukunika amandla le nketho noma cha ngokuqoka noma ukususa ukumaka ibhokisi lokuhlola [lekheli le-MAC]. Indawo ethize yememori ye-flash isethwe endaweni ye-[Indawo ye-MAC Flash].
Inkinobho ethi [Setha ikheli le-MAC] ivumela umsebenzisi ukuthi akhethe ikheli le-MAC ngale ndlela elandelayo:

  1. Thikha ibhokisi elithi [Ububanzi] bese unikeza ikheli lokuqala endaweni ethi [Ikheli Lokuqala]. Ikheli lokuqala ikheli le-MAC okufanele ligcinwe kudivayisi yokuqala exhunyiwe.
    • Kungenzeka ukusetha izinyathelo ezikhuphukayo kusukela enanini [Ikheli Lokuqala] ngokufaka inombolo yamabhodi azohlelwa kuNum. Ithebhu yamabhodi, noma ngokufaka [Ikheli Lokugcina] ivelu:
    • Uma imodi ezenzakalelayo ikhethiwe kuthebhu ethi Izenzo, uhlu lwamakheli e-MAC akhethiwe lusetshenziselwa imisebenzi yokuhlela okuzenzakalelayo. Uma kungenjalo, idivaysi eyodwa kuphela ehleliwe, kusetshenziswa inkambu ethi [Ikheli Lokuqala].
  2. Umsebenzisi anganikeza uhlu lwamakheli e-MAC azosetshenziswa ngokokufaka file:
    • Hlola [File] ibhokisi lokuhlola bese ukhetha umbhalo ofakiwe file ku- [Layisha File] inkambu.
    • Uma imodi ezenzakalelayo ikhethiwe kuthebhu ethi Izenzo, uhlu lwamakheli e-MAC akhethiwe lusetshenziselwa imisebenzi yokuhlela okuzenzakalelayo. Uma kungenjalo, ikheli lokuqala kuphela elisetshenziselwa umsebenzi wokuhlela owodwa.

Ibhokisi lokuhlola elithi [Londoloza ilogu Yekheli le-MAC] livumela uhlu lwamakheli e-MAC asetshenzisiwe ukuthi agcinwe ku- file, ekhethiwe ku- [File Igama] inkambu.
Ukuhlelwa kwekheli le-MAC kungahlanganiswa nemodi yokuhlela ezenzakalelayo. Kudivayisi ngayinye exhunyiwe, isithombe file ihlelwa kuqala, kulandele ikheli le-MAC. Inombolo yamakheli e-MAC akhethiwe
(usayizi wohlu lwamakheli okhuphukayo noma okokufaka file size) icupha ukuphela kwemisebenzi yokuhlela ezenzakalelayo. Ikheli ngalinye le-MAC elihleliwe liboniswa efasiteleni Lokungena.
Ukuhlelwa kwekheli le-MAC kusekelwa kumodi ye-UAR ne-SWD.

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (15) I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (16) I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (17)

Umsebenzisi angakhetha ukuthi ngabe izikhathi noma chaamp yengezwa kulogi yekheli le-MAC elilondoloziwe file igama (njengesijobelelo).
Uma izikhathiamp ayingeziwe egameni lelogi file, yonke imininingwane yelogi igcinwa kulogi efanayo file. Uma izikhathiamp yengezwa, imininingwane yelogi yomdlalo ngamunye igcinwa kulogi ehlukile file.
Igama lelogi file kungacaciswa kusetshenziswa i- [File Igama] inkambu.

Isiqalisi se-RF-Flasher

Isiqalisi se-RF-Flasher siyinsiza ezimele evumela umsebenzisi ukuthi asebenzise imiyalo ye-RF-Flasher esebenzisa i-RF-Flasher utility GUI.
Kudingeka iwindi lomyalo we-DOS futhi zombili izindlela ze-UART ne-SWD ziyasekelwa (kusetshenziswa .bin kanye nesithombe se-.hex files).
Isiqalisi se-RF-Flasher (RF-Flasher_Launcher.exe) sifakiwe kuphakheji yesofthiwe ye-RF-Flasher yensiza ngaphakathi kwefolda yohlelo lokusebenza. "Khipha ifolda" kumenyu yokuqala yephakheji yesoftware ye-RF-Flasher
into (i-ST RF-Flasher utility xxx) ivumela ukufinyelela okuqondile kufolda yohlelo lokusebenza.

Izimfuneko
Ukuze usebenzise isiqalisi se-RF-Flasher kudivayisi ethile, izimfuneko ezilandelayo kufanele kuhlangatshezwane nazo:

  • Imodi ye-UART: inkundla ye-BlueNRG-1, BlueNRG-2, BlueNRG-LP, noma i-BlueNRGLPS kufanele ixhunywe embobeni ye-PC USB
  • Imodi ye-SWD: ithuluzi lehadiwe le-SWD lokuhlela/lokulungisa iphutha kufanele lixhunywe emigqeni ye-SWD ye-BlueNRG-1, BlueNRG-2, BlueNRG-LP, noma ye-BlueNRG-LPS.

Ngenketho ye -l, zonke izinyathelo zokusebenza zilandelwa kulogi files, egcinwe kufolda ethi “Amalogi”, edalwe kufolda yesoftware ye-RF-Flasher ethi “Isicelo”.

Izinketho zokusebenzisa isiqalisi se-RF-Flasher
Ukuze usebenzise isiqalisi se-RF-Flasher kudivayisi ethile, umsebenzisi kufanele avule igobolondo le-Windows DOS futhi aqalise.
RF-Flasher_Launcher.exe ngomyalo ofanele, nezinketho (sebenzisa -h ukuze uthole uhlu lwazo zonke izinketho ezisekelwayo).
RF-Flasher_Launcher.exe -h:
Ukusetshenziswa: I-RF-Flasher Launcher [-h] {flash, funda, mass_erase, verify_memory, erase_pages, uart, swd, read_OTP,
bhala_OTP}
Inguqulo yesiqalisi se-RF-Flasher xxx
Izimpikiswano ozikhethela zona:
-h, -help: khombisa lo mlayezo wosizo bese uphuma ku-Command:
{flash, funda, sula_ubuningi, qinisekisa_inkumbulo, sula_amakhasi, uart, swd, funda_OTP, bhala_OTP}

  • flash: hlela inkumbulo flash
  • funda: funda inkumbulo ekhanyayo
  • mass_erase: sula inkumbulo ekhanyayo
  • verify_memory: qinisekisa okuqukethwe idivayisi ye-RF nge file
  • erase_pages: sula ikhasi elilodwa noma amaningi kumemori ye-flash
  • i-uart: bonisa wonke amachweba we-COM axhunyiwe (imodi ye-UART)
  • swd: bonisa wonke amadivayisi axhunywe ngesixhumi esibonakalayo se-SWD: ST-LINK, CMSIS-DAP, J-Link (imodi ye-SWD)
  • funda_OTP: funda indawo ye-OTP (kumodi ye-SWD kuphela)
  • bhala_OTP: bhala indawo ye-OTP (ngemodi ye-SWD kuphela)

Isiqalisi se-RF-Flasher: Izindlela ze-UART & SWD
Isiqalisi se-RF-Flasher sisekela izindlela ezimbili zokusebenza:

  • Imodi ye-UART (xhuma idivayisi ekhethiwe embotsheni ye-USB ye-PC)
  • Imodi ye-SWD (xhuma i-BlueNRG-1, BlueNRG-2, BlueNRG-LP, noma imigqa ye-SWD yedivayisi ye-BlueNRG-LPS ekhethiwe ku-SWD ithuluzi lokuhlela/lokulungisa iphutha).

Isiqalisi se-RF-Flasher: sebenzisa umyalo we-uart ukuthola uhlu lwazo zonke izimbobo ze-COMx ezitholakalayo (amadivayisi axhunywe kumachweba we-PC USB):

RF-Flasher_Launcher.exe uart
I-PORT xhumekile = COM194 (ST DK), COM160 (ST DK)
Isiqalisi se-RF-Flasher: sebenzisa umyalo we-swd ukuze uthole uhlu lwazo zonke ezitholakalayo ezixhunyiwe zehadiwe ye-SWD amathuluzi wokuhlela/wokulungisa iphutha:
RF-Flasher_Launcher.exe swd
Ixhunywe YI-ST-LINK = AYIKHO ST-LINK EXHUNYIWE
Ixhunywe YI-CMSIS-DAP (inombolo ye-serial ye-CMSIS-DAP interfaces):

  1. 07200001066fff333231545043084259a5a5a5a597969908
  2. 07200001066dff383930545043205830a5a5a5a597969908
  3. 07200001066dff333231545043084255a5a5a5a597969908 IYAXHUNYWA NGU-J-Link = AYIKHO J-Link IYAXHUNYIWE

Isiqalisi se-RF-Flasher: umyalo we-flash
Ukusebenzisa insiza yesiqalisi se-RF-Flasher ukuhlela imemori ye-flash yedivayisi ethile, umyalo we-flash uyatholakala (thina inketho -h ukuze uthole uhlu lwazo zonke izinketho ezisekelwayo):
I-RF-Flasher_Launcher.exe flash -h

Ukusetshenziswa komyalo we-Flash
I-RF-Flasher_Launcher.exe flash [-h] [-ikheli START_ADDRESS][-f FILE_TO_FLASH
[FILE_TO_FLASH, …]] [-sula] [-qinisekisa] [-rp] [-mac] [-mac_address MAC_ADDRESS][-mac_log_file MAC_LOG_FILE][-mac_start MAC_START_ADDRESS | -mac_file
MAC_FILE_ADDRESS](-konke | -d DEVICE_ID) [-verbose {0, 1, 2, 3, 4}] [-l](-UART |
-SWD) [-imvamisa {5,15,25,50,100,125,240,480,900,1800,4000}]

I-Flash command izimpikiswano ozikhethela zona

  • -ikheli START_ADDRESS, --ikheli START_ADDRESS: ikheli lokuqala.
  • -konke, -all: wonke amadivayisi axhunyiwe (imbobo ye-COM kwimodi ye-UART; I-ST-LINK ID, i-CMSIS-DAP ID, ne-J-link ID kumodi ye-SWD).
  • -d DEVICE_ID, -device DEVICE_ID: setha i-ID yethuluzi lehadiwe elisetshenziselwa uxhumano (imbobo ye-COM kumodi ye-UART; ST-LINK ID, CMSIS-DAP ID, kanye ne-J-Link ID kumodi ye-SWD).
  • -susa, --susa: nika amandla inketho ye-[Ukusula Okuningi].
  • -f FILE_TO_FLASH [FILE_TO_FLASH ...], -fileI-ToFlash FILE_TO_FLASH
    [FILE_TO_FLASH …]: uhlu lwe-.bin noma .hex files ukuhlela idivayisi ye-RF: i-BlueNRG-1, BlueNRG-2, BlueNRG-LP, noma idivayisi ye-BlueNRG-LPS.
  • imvamisa {5,15,25,50,100,125,240,480,900,1800,4000}, -frequency {5,15,25,50,100,125,240,480,900,1800,4000}: set frequency - SWDLINK hardware Inani elizenzakalelayo lingu-4000.
  • -h, -help: khombisa lo mlayezo wosizo bese uphuma.
  • -l, -log: idatha yelogi.
  • -mac, -mac: vumela inketho [yekheli le-Mac].
  • -mac_address -MAC_ADDRESS: indawo yememori ekhanyayo lapho kugcinwa khona ikheli lomphakathi le-Bluetooth®.
  • -mac_file MAC_FILE_ADDRESS, -mf MAC_FILE_ADDRESS: file equkethe uhlu lwamakheli e-MAC.
  • -mac_log_file MAC_LOG_FILE, –ml MAC_LOG_FILE: files aqukethe amalogu amakheli e-MAC agciniwe/angagciniwe nasetshenzisiwe/angasetshenziswanga.
  • -mac_start MAC_START_ADDRESS, –ms MAC_START_ADDRESS: ikheli lokuqala le-MAC.
  • -rp, --readout_protection: vumela inketho ye-[ReadOut Protection].
  • -SWD, --swd: SWD modality (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, --uart: Imodi ye-UART. Ibhodi langokwezifiso kufanele lifakwe kumodi ye-bootloader (inani lephinikhodi ye-DIO7 liphezulu ngenkathi kwenziwa umjikelezo wokusetha kabusha idivayisi ye-BlueNRG-1 noma ye-BlueNRG-2; inani lephinikhodi le-PA10 liphezulu ngenkathi kusethwa kabusha i-BlueNRG-LP noma idivayisi ye-BlueNRG-LPS) ngaphambi kokwenza umsebenzi. .
  • -verbose {0, 1, 2, 3, 4}, -verbose {0, 1, 2, 3, 4}: khulisa i-verbosity yokuphumayo; setha ileveli yokususa iphutha ifike ku-4 (kumodi ye-SWD kuphela nedatha yelogi). Inani elizenzakalelayo ngu-2.
  • -qinisekisa, -qinisekisa: nika amandla inketho ethi [Qinisekisa].

Qaphela:

  • Uma imodi ye-UART ikhethiwe, idivayisi kufanele ixhunywe embobeni ye-PC USB COM futhi inketho ye-UART kufanele isetshenziswe. Uma idivayisi engaphezu kweyodwa ixhunywe kumachweba we-PC USB, inketho -konke ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa imbobo ngayinye ye-COM esebenzisa inketho ethi -d.
  • Uma imodi ye-SWD ikhethiwe, ithuluzi lehadiwe le-SWD lokuhlela/lokulungisa iphutha kufanele lixhunywe emigqeni yedivayisi ekhethiwe ye-SWD, futhi kuyadingeka ukusebenzisa inketho -SWD. Uma idivaysi engaphezu kweyodwa ixhunywe ku-PC ngokusebenzisa isixhumi esibonakalayo se-SWD, i--all option ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa isikhombimsebenzisi ngasinye esebenzisa inketho ethi -d.
  • I kanambambili file okuzolayishwa kucaciswe kusetshenziswa inketho ethi -f. Uma umsebenzisi efuna ukuhlela i-BlueNRG-1, i-BlueNRG-2, i-BlueNRG-LP, noma i-BlueNRG-LPS amadivayisi anamabhanari ahlukene. files phakathi neseshini yokuhlela efanayo, bangacacisa izithombe kanambambili ezifanele ngokulandela lolu hlelo: BlueNRG-1, BlueNRG-2, BlueNRG-LP, BlueNRG-LPS.
    I-RF-Flasher_Launcher.exe flash -UART -konke
    – f “C:\{user_path}\BlueNRG-1_2 DK
    3.2.2\Firmware\BlueNRG1_Periph_Examples\Micro\Hello_World\BlueNRG-1\Micro_Hell o_World.bin”
    – f “C:\{user_path}\BlueNRG-1_2 DK
    3.2.2\Firmware\BlueNRG1_Periph_Examples\Micro\Hello_World\BlueNRG-2\Micro_Hell o_World.bin” –l
    – f “C:{user_path}\BlueNRG-LP DK 1.4.0\Firmware
    \I-peripheral_Eksampkancane\EksampLes_MIX\MICRO\MICRO_Sawubona_World\STEVAL-
    IDB011V1\Micro_Hello_World.bin”
    – f “C:{user_path}\BlueNRG-LP DK 1.4.0\Firmware
    \I-peripheral_Eksampkancane\EksampLes_MIX\MICRO\MICRO_Sawubona_World\STEVAL-
    IDB012V1\Micro_Hello_World.bin”
    Okokuqala file ihlelwe kumadivayisi axhunyiwe e-BlueNRG-1; owesibili file ihlelwe kumadivayisi axhunyiwe e-BlueNRG-2; eyesithathu file ihlelwe kumadivayisi e-BlueNRG-LP axhunyiwe; owesine file ihlelwe kumadivayisi axhunyiwe e-BlueNRG-LPS.
  • Uma inketho ye- -f ingasetshenziswa, izithombe kanambambili filekucaciswe kokuthi Isicelo/config_file.conf isetshenziswa:
    #Isithombe file ngedivayisi ye-BlueNRG_1
    BLUENRG_1 = “user_path”/bluenrg_1_binary_file.hex
    #Isithombe file ngedivayisi ye-BlueNRG_2
    BLUENRG_2 = “user_path”/bluenrg_2_binary.hex
    #Isithombe file kudivayisi ye-BlueNRG_LP
    BLUENRG_LP = “user_path”/bluenrg_lp_binary.hex
    #Isithombe file ngedivayisi ye-BlueNRG_LPS
    BLUENRG_LPS = “user_path”/bluenrg_lps_binary.hex
    Umsebenzisi kufanele acacise indlela yesithombe kanambambili egcwele kudivayisi ngayinye.

Isiqalisi se-RF-Flasher: funda umyalo
Ukuze usebenzise isiqalisi se-RF-Flasher ukufunda imemori ye-flash yedivayisi ethile, umyalo wokufunda uyatholakala (sebenzisa -h ukuze uthole uhlu lwazo zonke izinketho ezisekelwayo):
RF-Flasher_Launcher.exe funda -h
Funda ukusetshenziswa komyalo
I-RF-Flasher_Launcher.exe ifundeka kanje [-h] [-ikheli START_ADDRESS][-usayizi SIZE] [–wonke] [-s] (-konke | -d DEVICE_ID)(-UART | -SWD) [-verbose {0, 1 , 2, 3, 4}] [-l] [-imvamisa {5,15,25,50,100,125,240,480,900,1800,4000}]

Funda izimpikiswano ozikhethela zomyalo

  • -ikheli START_ADDRESS, --ikheli START_ADDRESS: ikheli lokuqala (inani elimisiwe ngu-0x10040000).
  • -konke, -all: wonke amadivayisi axhunyiwe (imbobo ye-COM kwimodi ye-UART; I-ST-LINK ID, i-CMSIS-DAP ID, ne-J-link ID kumodi ye-SWD).
  • -d DEVICE_ID, -device DEVICE_ID: setha i-ID yethuluzi lehadiwe elisetshenziselwa uxhumano (imbobo ye-COM kumodi ye-UART; ST-LINK ID, CMSIS-DAP ID, kanye ne-J-Link ID kumodi ye-SWD).
  • -konke, -konke: funda yonke inkumbulo ye-flash.
  • -imvamisa {5,15,25,50,100,125,240,480,900,1800,4000} -frequency
    {5,15,25,50,100,125,240,480,900,1800,4000}: setha ivelu yokuvama (kumodi ye-SWD kuphela - ihadiwe ye-ST-LINK). Inani elizenzakalelayo lingu-4000.
  • -h, -–help: khombisa lo mlayezo wosizo bese uphuma.
  • -l, --log: idatha yelogi.
  • -s, --show: khombisa inkumbulo ekhanyayo ngemuva kokusebenza kokufunda.
  • -usayizi SIZE, --usayizi SIZE: usayizi wememori ye-flash okufanele ifundwe (inani elizenzakalelayo ngu-0x3000).
  • -SWD, --swd: SWD modality (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, –-uart: UART modality. Amabhodi angokwezifiso kufanele afakwe kumodi ye-bootloader ngaphambi kokwenza lo msebenzi. Kumadivayisi e-BlueNRG-LP kanye ne-BlueNRG-LPS, umsebenzisi kufanele asethe iphinikhodi ye-PA10 enanini eliphezulu futhi enze umjikelezo wokusetha kabusha idivayisi, agcine i-PA10 inenani eliphezulu. Kumadivayisi e-BlueNRG-1 kanye ne-BlueNRG-2, umsebenzisi kufanele asethe iphinikhodi ye-DIO7 enanini eliphezulu futhi asethe kabusha idivayisi, agcine i-DIO7 inenani eliphezulu.
  • -verbose {0, 1, 2, 3, 4}, -verbose {0, 1, 2, 3, 4}: khulisa i-verbosity yokuphumayo; setha ileveli yokususa iphutha ifike ku-4 (kumodi ye-SWD kuphela nedatha yelogi). Inani elizenzakalelayo ngu-2.
  • Uma imodi ye-UART ikhethiwe, idivayisi kufanele ixhunywe embobeni ye-PC USB COM futhi inketho ye-UART kufanele isetshenziswe. Uma idivayisi engaphezu kweyodwa ixhunywe kumachweba we-PC USB, inketho -konke ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa imbobo ngayinye ye-COM esebenzisa inketho ethi -d.
  • Uma imodi ye-SWD ikhethiwe, ithuluzi lehadiwe le-SWD lokuhlela/lokulungisa iphutha kufanele lixhunywe emigqeni yedivayisi ekhethiwe ye-SWD, futhi kuyadingeka ukusebenzisa inketho -SWD. Uma idivaysi engaphezu kweyodwa ixhunywe ku-PC ngokusebenzisa isixhumi esibonakalayo se-SWD, i--all option ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa isikhombimsebenzisi ngasinye esebenzisa inketho ethi -d.

Isiqalisi se-RF-Flasher: umyalo wokusula ngobuningi
Ukusebenzisa isiqalisi se-RF-Flasher ukwenza ukusula okukhulu kwememori ye-flash yedivayisi ethile,
mass_erase umyalo uyatholakala (sebenzisa -h ukuze uthole uhlu lwazo zonke izinketho ezisekelwayo):
RF-Flasher_Launcher.exe mass_erase -h
Ukusetshenziswa komyalo wokusula ngobuningi
RF-Flasher_Launcher.exe mass_erase [-h] [-s] (-konke | -d DEVICE_ID)(-UART | -SWD) [-verbose {0, 1, 2, 3, 4}] [-l][- imvamisa
{5,15,25,50,100,125,240,480,900,1800,4000}]

Ubuningi busula izimpikiswano zokuzikhethela zomyalo

  • -konke, -all: wonke amadivayisi axhunyiwe (imbobo ye-COM kwimodi ye-UART; I-ST-LINK ID, i-CMSIS-DAP ID, ne-J-link ID kumodi ye-SWD).
  • -d DEVICE_ID, -device DEVICE_ID: setha i-ID yethuluzi lehadiwe elisetshenziselwa uxhumano (imbobo ye-COM kumodi ye-UART; ST-LINK ID, CMSIS-DAP ID, kanye ne-J-Link ID kumodi ye-SWD).
  • -imvamisa {5,15,25,50,100,125,240,480,900,1800,4000} -frequency
    {5,15,25,50,100,125,240,480,900,1800,4000}: setha ivelu yokuvama (kumodi ye-SWD kuphela - ihadiwe ye-ST-LINK). Inani elizenzakalelayo lingu-4000.
  • -h, --help: khombisa lo mlayezo wosizo bese uphuma.
  • -l, --log: idatha yelogi.
  • -s, --show: khombisa inkumbulo ekhanyayo ngemva kokusebenza kokusula okukhulu.
  • -SWD, --swd: SWD modality (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, –-uart: UART modality. Amabhodi angokwezifiso kufanele afakwe kumodi ye-bootloader ngaphambi kokwenza lo msebenzi. Kumadivayisi e-BlueNRG-LP kanye ne-BlueNRG-LPS, umsebenzisi kufanele asethe iphinikhodi ye-PA10 enanini eliphezulu futhi enze umjikelezo wokusetha kabusha idivayisi, agcine i-PA10 inenani eliphezulu. Kumadivayisi e-BlueNRG-1 kanye ne-BlueNRG-2, umsebenzisi kufanele asethe iphinikhodi ye-DIO7 enanini eliphezulu futhi asethe kabusha idivayisi, agcine i-DIO7 inenani eliphezulu.
  • -verbose {0, 1, 2, 3, 4}, -verbose {0, 1, 2, 3, 4}: khulisa i-verbosity yokuphumayo; setha ileveli yokususa iphutha ifike ku-4 (kumodi ye-SWD kuphela nedatha yelogi). Inani elizenzakalelayo ngu-2.

Qaphela

  • Uma imodi ye-UART ikhethiwe, idivayisi kufanele ixhunywe embobeni ye-PC USB COM futhi inketho ye-UART kufanele isetshenziswe. Uma idivayisi engaphezu kweyodwa ixhunywe kumachweba we-PC USB, inketho -konke ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa imbobo ngayinye ye-COM esebenzisa inketho ethi -d.
  • Uma imodi ye-SWD ikhethiwe, ithuluzi lehadiwe le-SWD lokuhlela/lokulungisa iphutha kufanele lixhunywe emigqeni yedivayisi ekhethiwe ye-SWD, futhi kuyadingeka ukusebenzisa inketho -SWD. Uma idivaysi engaphezu kweyodwa ixhunywe ku-PC ngokusebenzisa isixhumi esibonakalayo se-SWD, i--all option ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa isikhombimsebenzisi ngasinye esebenzisa inketho ethi -d.

Isiqalisi se-RF-Flasher: qinisekisa umyalo wememori
Ukusebenzisa isiqalisi se-RF-Flasher ukuze uqinisekise okuqukethwe kwememori ye-flash yedivayisi ethile, i
verify_memory umyalo uyatholakala (sebenzisa -h ukuze uthole uhlu lwazo zonke izinketho ezisekelwayo):
RF-Flasher_Launcher.exe verify_memory -h

Qinisekisa ukusetshenziswa komyalo wememori
RF-Flasher_Launcher.exe verify_memory [-h] -f FLASH_VERIFY_FILE[-s][-ikheli START_ADDRESS](-all | -d DEVICE_ID) [-verbose {0, 1, 2, 3, 4}][-l] (-UART |-SWD)[-frequency {5,15,25,50,100,125,240,480,900,1800,4000 ,XNUMX}]

Qinisekisa izimpikiswano ozikhethela zomyalo wenkumbulo

  • -ikheli START_ADDRESS, --ikheli START_ADDRESS: qala ikheli lokuqinisekisa (ye-.bin files kuphela). Inani elizenzakalelayo lingu-0x10040000.
  • -konke, -all: wonke amadivayisi axhunyiwe (imbobo ye-COM kwimodi ye-UART; I-ST-LINK ID, i-CMSIS-DAP ID, ne-J-link ID kumodi ye-SWD).
  • -d DEVICE_ID, -device DEVICE_ID: setha i-ID yethuluzi lehadiwe elisetshenziselwa uxhumano (imbobo ye-COM kumodi ye-UART; ST-LINK ID, CMSIS-DAP ID, kanye ne-J-Link ID kumodi ye-SWD).
  • -f FLASH_VERIFY_FILE, --file FLASH_VERIFY_FILE: file ezosetshenziselwa ukuqinisekisa inkumbulo ye-flash
  • -frequency {5,15,25,50,100,125,240,480,900,1800,4000}, -frequency {5,15,25,50,100,125,240,480,900,1800,4000} setha hardware (SWD) - imvamisa yehardware ye-STD LINK). Inani elizenzakalelayo lingu-4000.
  • -h, -–help: khombisa lo mlayezo wosizo bese uphuma
  • -l, -–log: log data.
  • -s, --show: khombisa inkumbulo ekhanyayo ngemuva kokusebenza kokuqinisekisa
  • -SWD, --swd: Imodi ye-SWD (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, --uart: Imodi ye-UART.
  • -verbose {0, 1, 2, 3, 4}, -verbose {0, 1, 2, 3, 4}: khulisa i-verbosity yokuphumayo; setha ileveli yokususa iphutha ifike ku-4 (kumodi ye-SWD kuphela nedatha yelogi). Inani elizenzakalelayo ngu-2.
  • Uma imodi ye-UART ikhethiwe, idivayisi kufanele ixhunywe embobeni ye-PC USB COM futhi inketho ye-UART kufanele isetshenziswe. Uma idivayisi engaphezu kweyodwa ixhunywe kumachweba we-PC USB, inketho -konke ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa imbobo ngayinye ye-COM esebenzisa inketho ethi -d.
  • Uma imodi ye-SWD ikhethiwe, ithuluzi lehadiwe le-SWD lokuhlela/lokulungisa iphutha kufanele lixhunywe emigqeni yedivayisi ekhethiwe ye-SWD, futhi kuyadingeka ukusebenzisa inketho -SWD. Uma idivaysi engaphezu kweyodwa ixhunywe ku-PC ngokusebenzisa isixhumi esibonakalayo se-SWD, i--all option ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa isikhombimsebenzisi ngasinye esebenzisa inketho ethi -d.

Isiqalisi se-RF-Flasher: susa umyalo wamakhasi
Ukusebenzisa isiqalisi se-RF-Flasher ukusula ikhasi lokuqukethwe lememori ekhanyayo kudivayisi ethile,
umyalo we-erase_pages uyatholakala (sebenzisa -h ukuthola uhlu lwazo zonke izinketho ezisekelwayo):
RF-Flasher_Launcher.exe erase_pages -h
Sula ukusetshenziswa komyalo wamakhasi
RF-Flasher_Launcher.exe erase_pages [-h](-UART |-SWD)(-all | -d DEVICE_ID) [-l] [-verbose {0, 1, 2, 3, 4}] [-frequency {5,15,25,50,100,125,240,480,900,1800,4000, XNUMX}] [-s] (-p AMAKHASI | -range RANGE RANGE)

Sula amakhasi ayala ama-agumenti ongawakhetha

  • -konke, -all: wonke amadivayisi axhunyiwe (imbobo ye-COM kwimodi ye-UART; I-ST-LINK ID, i-CMSIS-DAP ID, ne-J-link ID kumodi ye-SWD).
  • -d DEVICE_ID, -device DEVICE_ID: setha i-ID yethuluzi lehadiwe elisetshenziselwa uxhumano (imbobo ye-COM kumodi ye-UART; ST-LINK ID, CMSIS-DAP ID, kanye ne-J-Link ID kumodi ye-SWD).
  • -h, --help: khombisa lo mlayezo wosizo bese uphuma.
  • -l, --log: idatha yelogi.
  • -imvamisa {5,15,25,50,100,125,240,480,900,1800,4000} -frequency
    {5,15,25,50,100,125,240,480,900,1800,4000}: setha ivelu yokuvama (kumodi ye-SWD kuphela - ihadiwe ye-ST-LINK). Inani elizenzakalelayo lingu-4000.
  • -p AMAKHASI, -Ikhasi AMAKHASI: uhlu lwamakhasi azosulwa (luqala ku-0).
  • -ububanzi UABANGA UBUNINGI, -ububanzi UBUNINGI UBUNINGI: ububanzi bamakhasi azosulwa (lapho u-RANGE wokuqala ubonisa inombolo yekhasi elincane kakhulu bese owesibili u-RANGE ubonisa inombolo yekhasi ephakeme kakhulu).
  • -s, --show: khombisa inkumbulo ekhanyayo ngemuva kokusebenza kokuqinisekisa.
  • -SWD, --swd: SWD modality (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, –-uart: UART modality. Amabhodi angokwezifiso kufanele afakwe kumodi ye-bootloader ngaphambi kokwenza lo msebenzi. Kumadivayisi e-BlueNRG-LP kanye ne-BlueNRG-LPS, umsebenzisi kufanele asethe iphinikhodi ye-PA10 enanini eliphezulu futhi enze umjikelezo wokusetha kabusha idivayisi, agcine i-PA10 inenani eliphezulu. Kumadivayisi e-BlueNRG-1 kanye ne-BlueNRG-2, umsebenzisi kufanele asethe iphinikhodi ye-DIO7 enanini eliphezulu futhi asethe kabusha idivayisi, agcine i-DIO7 inenani eliphezulu.
  • -verbose {0, 1, 2, 3, 4}, -verbose {0, 1, 2, 3, 4}: khulisa i-verbosity yokuphumayo; setha ileveli yokususa iphutha ifike ku-4 (kumodi ye-SWD kuphela nedatha yelogi). Inani elizenzakalelayo ngu-2.
  • Uma imodi ye-UART ikhethiwe, idivayisi kufanele ixhunywe embobeni ye-PC USB COM futhi inketho ye-UART kufanele isetshenziswe. Uma idivayisi engaphezu kweyodwa ixhunywe kumachweba we-PC USB, inketho -konke ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa imbobo ngayinye ye-COM esebenzisa inketho ethi -d.
  • Uma imodi ye-SWD ikhethiwe, ithuluzi lehadiwe le-SWD lokuhlela/lokulungisa iphutha kufanele lixhunywe emigqeni yedivayisi ekhethiwe ye-SWD, futhi kuyadingeka ukusebenzisa inketho -SWD. Uma idivaysi engaphezu kweyodwa ixhunywe ku-PC ngokusebenzisa isixhumi esibonakalayo se-SWD, i--all option ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa isikhombimsebenzisi ngasinye esebenzisa inketho ethi -d.

Isiqalisi se-RF-Flasher: funda umyalo we-OTP
Ukuze usebenzise isiqalisi se-RF-Flasher ukufunda i-OTP yedivayisi ethile, umyalo we-read_OTP uyatholakala (sebenzisa -h ukuze uthole uhlu lwazo zonke izinketho ezisekelwayo):
RF-Flasher_Launcher.exe funda_OTP -h
Funda ukusetshenziswa komyalo we-OTP
RF-Flasher_Launcher.exe funda_OTP [-h] (konke | -d DEVICE_ID) [-ikheli OTP_ADDRESS][-num NUM] [-frequency {5,15,25,50,100,125,240,480,900,1800,4000-l0,1,2,3,4]] s] [-verbose {XNUMX}]

Funda ama-agumenti ozikhethela womyalo we-OTP

  • -ikheli OTP_ADDRESS, -ikheli OTP_ADDRESS: ikheli lendawo ye-OTP (okuzenzakalelayo: 0x10001800
    - izwi liqondaniswe).
  • -konke, -all: wonke amadivayisi axhunyiwe (ST-LINK ID, CMSIS-DAP ID, kanye ne-J-link ID kumodi ye-SWD).
  • -d DEVICE_ID, -device DEVICE_ID: setha i-ID yethuluzi lehadiwe elisetshenziselwa uxhumano (ST-LINK ID, CMSIS-DAP ID, kanye ne-J-Link ID kumodi ye-SWD).
  • -frequency {5,15,25,50,100,125,240,480,900,1800,4000}, -frequency {5,15,25,50,100,125,240,480,900,1800,4000} setha hardware (SWD) - imvamisa yehardware ye-STD LINK). Inani elizenzakalelayo lingu-4000.
  • -h, --help: khombisa lo mlayezo wosizo bese uphuma.
  • -l, --log: idatha yelogi.
  • -inombolo NUM, -inombolo NUM: inombolo yamagama okufanele afundwe ngaphakathi kwendawo ye-OTP. Inani elizenzakalelayo lingu-256.
  • -s, --show: khombisa indawo ye-OTP.
  • -verbose {0, 1, 2, 3, 4}, -verbose {0, 1, 2, 3, 4}: khulisa i-verbosity yokuphumayo; setha ileveli yokususa iphutha ifike ku-4 (kumodi ye-SWD kuphela nedatha yelogi). Inani elizenzakalelayo ngu-2.

Qaphela:
Umyalo we-read_OTP usebenza kuphela kumodi ye-SWD. Ngakho-ke, ithuluzi le-SWD hardware programming/debugging kumele lixhunywe emigqeni ekhethiwe yedivayisi ye-SWD. Uma idivaysi engaphezu kweyodwa ixhunywe ku-PC ngokusebenzisa isixhumi esibonakalayo se-SWD, i--all option ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa isikhombimsebenzisi ngasinye esebenzisa inketho ethi -d.

Isiqalisi se-RF-Flasher: bhala umyalo we-OTP
Ukuze usebenzise isiqalisi se-RF-Flasher ukufunda i-OTP yedivayisi ethile, umyalo wokubhala_OTP uyatholakala (sebenzisa -h ukuze uthole uhlu lwazo zonke izinketho ezisekelwayo):
RF-Flasher_Launcher.exe bhala_OTP -h

Bhala ukusetshenziswa komyalo we-OTP
RF-Flasher_Launcher.exe bhala_OTP [-h] (konke | -d DEVICE_ID) -ikheli OTP_ADDRESS
-value OTP_VALUE [-frequency {5,15,25,50,100,125,240,480,900,1800,4000}] [-l] [-verbose {0,1,2,3,4}]

Bhala izimpikiswano ozikhethela zomyalo we-OTP

  • -ikheli OTP_ADDRESS, -ikheli OTP_ADDRESS: ikheli lendawo ye-OTP (okuzenzakalelayo: 0x10001800 – igama liqondaniswe).
  • -konke, -all: wonke amadivayisi axhunyiwe (ST-LINK ID, CMSIS-DAP ID, kanye ne-J-link ID kumodi ye-SWD).
  • -d DEVICE_ID, -device DEVICE_ID: setha i-ID yethuluzi lehadiwe elisetshenziselwa uxhumano (ST-LINK ID, CMSIS-DAP ID, kanye ne-J-Link ID kumodi ye-SWD).
  • -frequency {5,15,25,50,100,125,240,480,900,1800,4000}, -frequency {5,15,25,50,100,125,240,480,900,1800,4000} setha hardware (SWD) - imvamisa yehardware ye-STD LINK). Inani elizenzakalelayo lingu-4000.
  • -h, --help: khombisa lo mlayezo wosizo bese uphuma.
  • -l, --log: idatha yelogi.
  • -s, --show: khombisa inkumbulo ekhanyayo ngemuva kokusebenza kokuqinisekisa.
  • -inani OTP_VALUE, -inani OTP_VALUE: inani le-OTP (igama, elifana ne-0x11223344)
  • -verbose {0, 1, 2, 3, 4}, -verbose {0, 1, 2, 3, 4}: khulisa i-verbosity yokuphumayo; setha ileveli yokususa iphutha ifike ku-4 (kumodi ye-SWD kuphela nedatha yelogi). Inani elizenzakalelayo ngu-2.

Qaphela:
Umyalo we-writ_OTP usebenza kuphela kumodi ye-SWD. Ngakho-ke, ithuluzi le-SWD hardware programming/debugging kumele lixhunywe emigqeni ekhethiwe yedivayisi ye-SWD. Uma idivaysi engaphezu kweyodwa ixhunywe ku-PC ngokusebenzisa isixhumi esibonakalayo se-SWD, i--all option ivumela ukuthi zonke zikhethwe. Kungenjalo, umsebenzisi angacacisa isikhombimsebenzisi ngasinye esebenzisa inketho ethi -d.
Isiqalisi se-RF-Flasher: isbampLes
Hlela isithombe kanambambili kumadivayisi axhunyiwe e-BlueNRG-1 kanye ne-BlueNRG-2 ngethuluzi lehadiwe le-ST-LINK (ngemodi ye-SWD):
I-RF-Flasher_Launcher.exe flash -SWD -all -f “User_Application.hex” -l
Hlela isithombe kanambambili kumadivayisi axhunyiwe e-Bluetooth® Amandla Aphansi usebenzisa izimbobo ze-USB COM (ngemodi ye-UART):
I-RF-Flasher_Launcher.exe flash -UART -all -f “User_Application.hex” -l
Hlela isithombe kanambambili kumadivayisi axhunyiwe usebenzisa isiteshi se-CMSIS-DAP usebenzisa izinketho zokusula, zokuqinisekisa, nokungena (ngemodi ye-SWD):

I-STMicroelectronics-UM2406-The-RF-Flasher-Utility-Software-Package- (18)

Umlando wokubuyekeza

Ithebula 3. Umlando wokubuyekeza idokhumenti

Usuku Inguqulo Izinguquko
15-May-2018 1 Ukukhishwa kokuqala.
 

  

 

03-Jul-2018

  

 

  

2

 Umfanekiso Obuyekeziwe 1. I-BlueNRG-1, I-BlueNRG-2 Flasher Utility, Umfanekiso 2. Iwindi eliyinhloko le-Flasher Utility UART, Umfanekiso 3. Imodi ye-UART ye-Flasher: isithombe file , Umfanekiso 4. Imodi ye-Flasher ye-UART: inkumbulo yedivayisi , Umfanekiso 5. Imodi ye-UART ekhanyayo: ukushintsha izinkambu zememori, Umfanekiso 7. I-Flasher Utility: iwindi eliyinhloko le-SWD, Umfanekiso 8. Imodi ye-SWD ye-Flasher Utility: imemori yedivayisi , Umfanekiso we-10.

I-Flasher Utility: Imodi ezenzakalelayo ye-SWD, Umfanekiso 11. Insiza ye-Flasher: Imodi ezenzakalelayo ye-UART, Umfanekiso 12. Insiza ye-Flasher: Ukuhlelwa kwe-UART okuzenzakalelayo kuqediwe futhi Umfanekiso 13. I-Flasher Utility: I-SWD MAC yokukhethwa kwekheli.

Umbhalo omncane uyashintsha kuyo yonke idokhumenti.
 26-Feb-2019  3 Kubuyekezwe Isethulo Sesigaba kanye nemodi ye-UART yeSigaba 3.1: ukuthi isebenza kanjani.
Kwengezwe insiza yesiqalisi yeSigaba 8 kanye nazo zonke izigaba zayo ezingaphansi.
 

09-Ephreli-2019

  

4

 Ireferensi eyengeziwe "kufolda yohlelo lokusebenza" kuSigaba 8: Isiqalisi se-RF-Flasher.

Isigaba 8.4 esibuyekeziwe: Isiqalisi se-RF-Flasher: umyalo we-flash.
 

 

 

 

 

14-Jul-2020

  

  

5

 Kushintshwe i-BlueNRG-1 ne-BlueNRG-2 yaba iphakheji yesofthiwe ye-BlueNRG-X Flasher

Kwengezwe ireferensi kudivayisi ye-BlueNRG-LP.

Umfanekiso Obuyekeziwe 1. Ithuluzi le-RF-Flasher, Umfanekiso 3. Iwindi eliyinhloko le-UART le-Flasher, Umfanekiso 5. Imodi ye-UART ye-Flasher: Ithebhu Yememori Yedivayisi, Umfanekiso 6. Imodi ye-UART ekhanyayo: ukushintsha izinkambu zememori,

Umfanekiso 9. Insiza eFlasher: Iwindi elikhulu le-SWD, Umfanekiso 10. Imodi ye-SWD ye-Flasher: Ithebhu Yememori Yedivayisi, Umfanekiso 14. Insiza eFlasher: I-SWD Plug & Play mode, Umfanekiso 15. Insiza eFlasher: Ukukhetha ikheli le-MAC kanye noMfanekiso 18. Isiqalisi se-RF-Flasher: umyalo we-flash nge -susa, -l, -qinisekisa inketho
 

 

 

 

05-Dec-2020

  6 Isingeniso Sesigaba Esibuyekeziwe, Isigaba 2.1: Izidingo zesistimu, Isigaba 4.1: Imodi ye-UART: indlela yokusebenza, Isigaba 5: Iwindi elikhulu le-SWD,Isigaba 5.1: Imodi ye-SWD: indlela yokusebenza, Isigaba 8.1: Izimfuneko,

Isigaba 8.2: Izinketho zensiza yesiqalisi se-RF-Flasher, Isigaba 8.3: Insiza yesiqalisi se-RF-Flasher: Amamodi e-UART & SWD, Isigaba 8.4: Insiza yesiqalisi se-RF-Flasher: umyalo we-flash, Isigaba 8.5: Insiza yesiqalisi se-RF-Flasher: funda umyalo, Isigaba 8.6 : Isisetshenziswa sokuqalisa i-RF-Flasher: umyalo wokusula ngobuningi,

Isigaba 8.7: Isiqalisi se-RF-Flasher: qinisekisa umyalo wememori.

Kwengezwe Isigaba 8.8: Isiqalisi se-RF-Flasher: susa umyalo wamakhasi.
 

 

 

 

 

 

04-Oct-2021

  

 

 

 

 

 

7

 Kwengezwe Isigaba 5.2: Imodi ye-SWD: funda umkhakha we-bootloader kanye neSigaba 5.3: Imodi ye-SWD: funda indawo ye-OTP.

Kubuyekezwe isihloko, Isingeniso Sesigaba, Isigaba 2: Ukuqalisa, Isigaba 2.1: Izidingo zesistimu, Isigaba 2.2: Ukusethwa kwephakheji yesofthiwe,

Isigaba 3: Isixhumi esibonakalayo sebha yamathuluzi, Isigaba 4: Iwindi elikhulu le-UART, Isigaba 8: Insiza yesiqalisi se-RF- Flasher, Isigaba 8.1: Izimfuneko, Isigaba 8.2: Izinketho zensiza yesiqalisi se-RF-Flasher, Isigaba 8.3: Insiza yesiqalisi se-RF-Flasher: Izindlela ze-UART ne-SWD , Isigaba 8.4: Isiqalisi se-RF-Flasher: umyalo we-flash,

Isigaba 8.5: Insiza yesiqalisi se-RF-Flasher: funda umyalo, Isigaba 8.6: I-RF- Flasher isiqalisi esisetshenziswayo: umyalo wokusula ngobuningi, Isigaba 8.7: Insiza yesiqalisi se-RF-Flasher: qinisekisa umyalo wenkumbulo, Isigaba 8.8: Insiza yesiqalisi se-RF-Flasher: susa umyalo wamakhasi , Isigaba 1.1: Uhlu lwama-akhronimi kanye neSigaba 1.2: Imibhalo eyinkomba.
Usuku Inguqulo Izinguquko
Umfanekiso Obuyekeziwe 1. I-RF-Flasher utility, Umfanekiso 2. Qhathanisa Okubili Files ithebhu,

Umfanekiso 3. Iwindi eliyinhloko le-Flasher UART, Umfanekiso 4. Imodi ye-UART ye-Flasher: Isithombe File ithebhu, Umfanekiso 5. Imodi ye-Flasher ye-UART: Ithebhu Yememori Yedivayisi, Umfanekiso 6. Imodi ye-UART ye-Flasher: ukushintsha izinkambu zememori,

Umfanekiso 7. Imodi ye-Flasher ye-UART: Qhathanisa Imemori Yedivayisi nesithombe File ithebhu, Umfanekiso 9. Insiza eFlasher: Iwindi eliyinhloko le-SWD, Umfanekiso 10. Imodi ye-SWD ye-Flasher: Ithebhu Yememori Yedivayisi, Umfanekiso 16. Insiza ye-Flasher: Uhlelo lwekheli le-UART MAC, Umfanekiso 17. Insiza ye-Flasher: Uhlelo lwekheli le-SWD MAC kanye nomfanekiso 18. RF -Isiqalisi se-Flasher: umyalo we-flash nge - sula, -l, -qinisekisa inketho.
 

06-Ephreli-2022

  

8

 Kwengezwe ireferensi ye-BlueNRG-LPS kuyo yonke idokhumenti.

Isigaba 8.3 Esibuyekeziwe: Insiza yesiqalisi se-RF-Flasher: Izindlela ze-UART & SWD kanye neSigaba 8.4: Insiza yesiqalisi se-RF-Flasher: umyalo we-flash.
 

 

 

 

 

 

 

 

 

 

 

 

 

10-Jul-2024

  

 

 

 

 

 

 

 

 

 

 

 

 

9

 Kubuyekeziwe:
  • Isihloko sedokhumenti
  • Isingeniso Sesigaba
  • Isigaba 1.1: Uhlu lwama-akhronimi
  • Isigaba 1.2: Imibhalo eyinkomba
  • Umfanekiso 1. Umbuso we-RF-Flasher
  • Isigaba 3: Isixhumi esibonakalayo sebha yamathuluzi
  • Umfanekiso 3. Iwindi eliyinhloko le-Flasher UART
  • Isigaba 4.1: Imodi ye-UART: isetshenziswa kanjani
  • Isigaba 5: Iwindi elikhulu le-SWD
  • Isigaba 5.1: Imodi ye-SWD: isetshenziswa kanjani
  • Umfanekiso 12. Imodi ye-SWD ye-Flasher: funda i-bootloader
  • Isigaba 5.3: Imodi ye-SWD: funda indawo ye-OTP
  • Umfanekiso 14. I-Flasher Utility: I-SWD Plug & Play mode
  • Isigaba 7: Uhlelo lwekheli le-MAC
  • Isigaba 8.1: Izidingo
  • Isigaba 8.2: Izinketho zensiza yesiqalisi se-RF-Flasher
  • Isigaba 8.3: Isiqalisi se-RF-Flasher: Izindlela ze-UART & SWD
  • Isigaba 8.4: Isiqalisi se-RF-Flasher: umyalo we-flash
  • Isigaba 8.5: Isiqalisi se-RF-Flasher: funda umyalo
  • Isigaba 8.6: Isiqalisi se-RF-Flasher: umyalo wokusula ngobuningi
  • Isigaba 8.7: Isiqalisi se-RF-Flasher: qinisekisa umyalo wememori
  • Isigaba 8.8: Insiza yesiqalisi se-RF-Flasher: sula umyalo wamakhasi
  • Isigaba 8.9: Insiza yesiqalisi se-RF-Flasher: funda umyalo we-OTP
  • Isigaba 8.10: Isiqalisi se-RF-Flasher: bhala umyalo we-OTP

ISAZISO ESIBALULEKILE – FUNDA NGOKUQAPHELA
I-STMicroelectronics NV nezinkampani ezingaphansi kwayo (“ST”) igodla ilungelo lokwenza izinguquko, ukulungisa, izithuthukisi, ukuguqulwa, nokuthuthukiswa kwemikhiqizo ye-ST kanye/noma kulo mbhalo nganoma yisiphi isikhathi ngaphandle kwesaziso. Abathengi kufanele bathole ulwazi lwakamuva olufanele ngemikhiqizo ye-ST ngaphambi kokufaka ama-oda. Imikhiqizo ye-ST ithengiswa ngokulandela imigomo nemibandela ye-ST yokuthengisa ekhona ngesikhathi sokuvunywa kwe-oda.
Abathengi banomthwalo wemfanelo kuphela ekukhetheni, ekukhethweni, nasekusetshenzisweni kwemikhiqizo ye-ST futhi i-ST ayithathi sikweletu sosizo lwesicelo noma idizayini yemikhiqizo yabathengi.
Ayikho ilayisensi, eshiwo noma eshiwoyo, kunoma yiliphi ilungelo lempahla yengqondo elinikezwa i-ST lapha.
Ukudayiswa kabusha kwemikhiqizo ye-ST nezinhlinzeko ezihlukile kulwazi olubekwe lapha kuzovala noma yisiphi isiqinisekiso esinikezwe i-ST salowo mkhiqizo.
Ilogo ye-ST kanye ne-ST yizimpawu zokuthengisa ze-ST. Ukuze uthole ulwazi olwengeziwe mayelana nezimpawu zokuthengisa ze-ST, bheka ku www.st.com/trademarks. Wonke amanye amagama omkhiqizo noma wesevisi ayimpahla yabanikazi abafanele.
Ulwazi olukule dokhumenti luthatha indawo futhi luthatha indawo yolwazi olwalunikezwe ngaphambilini kunoma yiziphi izinguqulo zangaphambili zalo mbhalo.
© 2024 STMicroelectronics – Wonke amalungelo agodliwe
UM2406 - Rev 9

Amadokhumenti / Izinsiza

I-STMicroelectronics UM2406 I-RF-Flasher Utility Software Package [pdf] Imaniwali yosebenzisayo
UM2406, UM2406 I-RF-Flasher Utility Software Package, The RF-Flasher Utility Software Package, RF-Flasher Utility Software Package, Utility Software Package, Software Package, Package

Izithenjwa

Okuthunyelwe Okuhlobene

Shiya amazwana

Ikheli lakho le-imeyili ngeke lishicilelwe. Izinkambu ezidingekayo zimakiwe *