STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box

I-Hardware neSoftware kuphelileview

Hardware Overview

1. Sample ukusetshenziswa kuyatholakala ukuze:
2.  STEVAL-STWINBX1 STWIN.box – SensorTile Wireless Industrial Node Development Kit
3.  STEVAL-MKBOXPRO SensorTile.box-Pro multi-sensors and wireless connectivity development kit for any intelligent IoT node
4. STEVAL-STWINKT1B STWIN – SensorTile Wireless Industrial Node Development Kit

Hardware Overview (2/2)

• STWIN.box – SensorTile Wireless Industrial Node
• The STWIN.box (STEVAL-STWINBX1) is a development kit and reference design that simplifies prototyping and testing of advanced industrial sensing applications in IoT contexts such as condition monitoring and predictive maintenance.
• It is an evolution of the original STWIN kit (STEVAL-STWINKT1B) and features a higher mechanical accuracy in the measurement of vibrations, an improved robustness, an updated BoM to reflect the latest and best-in-class MCU and industrial sensors, and an easy-to-use interface for external add-ons.
• The STWIN.box kit consists of an STWIN.box core system, a 480mAh LiPo battery, an adapter for the ST-LINK debugger (STEVAL-MKIGIBV4), a plastic case, an adapter board for DIL 24 sensors and a flexible cable.

Izici Eziyinhloko

• Multi-sensing wireless platform for vibration monitoring and ultrasound detection
•  Built around STWIN.box core system board with processing, sensing, connectivity, and expansion capabilities
• Ultra-low power Arm® Cortex®-M33 with FPU and TrustZone at 160 MHz, 2048 kBytes Flash memory (STM32U585AI)
• MicroSD card slot for standalone data logging applications
• On-board Bluetooth® low energy v5.0 wireless technology (BlueNRG-M2), Wi-Fi (EMW3080) and NFC (ST25DV04K)
•  Wide range of industrial IoT sensors: Ultra-wide bandwidth (up to 6 kHz), low-noise, 3-axis digital vibration sensor (IIS3DWB), 3D accelerometer + 3D gyro iNEMO inertial measurement unit (ISM330DHCX) with Machine Learning Core, High-performance ultra-low-power 3-axis accelerometer for industrial applications (IIS2DLPC), Ultra-low power 3-axis magnetometer (IIS2MDC), Dual full-scale, 1.26 bar and 4 bar, absolute digital output barometer in full-mold package (ILPS22QS), Low-voltage, amandla aphansi kakhulu, 0.5°C ukunemba kwe-I²C/SMBus 3.0 inzwa yezinga lokushisa (STTS22H), imakrofoni yedijithali ye-MEMS yezinga le-Industrial (IMP34DT05), imakrofoni ye-Analog MEMS enempendulo yefrikhwensi efika ku-80 kHz (IMP23ABSU)
• Expandable via a 34-pin FPC connector
• Ulwazi lwakamuva luyatholakala ku www.st.com/stwinbx1

Hardware Overview (2/2)

• Ikhithi yokuthuthukisa ye-STEVAL-STWINBX1 ihlanganisa:
• The STEVAL-STWBXCS1 STWIN.box core system (main board)
• A plastic case with M3 bolts
• A 480 mAh 3.7 V LiPo battery
• The STEVAL-MKIGIBV4 ST-LINK adapter with programming cable
• The STEVAL-C34DIL24 adapter board for DIL24 sensors with the STEVAL-FLTCB01 flexible cable.

• Hardware Overview (1/2) 

SensorTile.box-Pro – multi-sensors and wireless connectivity development kit for any intelligent IoT node.

• The SensorTile.box-Pro (STEVAL-MKBOXPRO) s the new ready-to-use programmable wireless box kit for developing any IoT application based on remote data gathering and evaluation, exploit the full kit potential by leveraging both motion and environmental data sensing, along with a digital microphone, and enhance the connectivity and smartness of whatever environment you find yourself into.
•  The SensorTile.box-Pro kit consists of a SensorTile.box-Pro core system, a 480mAh LiPo battery, an adapter for the ST-LINK debugger (STEVAL-MKIGIBV4), a plastic case, QVAR electrodes, Wireless charger receiver circuit and a flexible cable.

Izici Eziyinhloko

• Ultra -low-power with FPU Arm-Cortex-M33 with TrustZone® microcontroller (STM32U585AI)
• High precision sensors to gather high-quality data: low-voltage local digital temperature sensor (STTS22H), six-axis inertial measurement unit (LSM6DSV16X), three-axis low-power accelerometer (LIS2DU12), 3-axis magnetometer (LIS2MDL), pressure sensor (LPS22DF) and digital microphone/audio sensor (MP23DB01HP)
• HW power switch, 4 programmable status LEDs (green, red, orange, blue), 2 programmable push-buttons, audio buzzer–Reset button, qvar with electrodes for user interface experience
• Interface for J-Link/SWD debug-probe, Interface for extension board and socket for DIL24 sensor adapters
• Connectivity: microSD card slot, Bluetooth® Low Energy 5.2 (BlueNRG 355AC), NFC tag (ST25DV04K)
• Power and charging options: USB Type-C® charging and connecting, 5 W wireless charging and 480 mAh battery
• Ulwazi lwakamuva luyatholakala ku www. https://www.st.com/en/evaluation-tools/stevalmkboxpro.html

Hardware Overview (2/2)

• Ikhithi yokuthuthukisa ye-STEVAL-MKBOXPRO ihlanganisa:
• The SensorTile.Box Pro (main board)
•  a plastic case with M2.5 screws
• a 480 mAh 3.7 V LiPo battery
• Qvar electrodes
• wireless charger receiver circuit
• programmable NFC tag
• Ikhadi le-microSD
• STEVAL-MKIGIBV4 STLINK adapter with programming cable

Isoftware Iphelileview

• Incazelo Yesofthiwe ye-FP-SNS-STAIOTCFT
• I-FP-SNS-STAIOTCFT iyi-STM32Cube Function Pack eyakhelwe ukusetshenziswa kanye Web isicelo ST AIoT Craft.
• Inhloso yaleli phekhi elisebenzayo ukuhlinzeka ngezinhlelo zokusebenza ezilula ezibonisa ukuthi zakha kanjani izicelo zangokwezifiso zamabhodi e-STEVAL-MKBOXPRO, STEVAL-STWINBX1 kanye ne-STEVAL-STWINKT1B.
• Ukunwetshwa kwakhelwe kubuchwepheshe besofthiwe ye-STM32Cube ukuze kube lula ukuphatheka kuzo zonke izilawuli ezincane ze-STM32 ezihlukene.

Izici ezibalulekile

• Complete applications on how to use:
• AI algorithms on MCU, MLC and ISPU
• Using PnPL protocol to communicate and sending commands/telemetries/properites
• Using USB serial communication to display the inference results
• Exploiting already existing X-CUBE-MEMS1/ISPU to target the different sensors
• Exploiting the X-CUBE-AI to import a chosen neural network
• Ukuphatheka kalula kuyo yonke imindeni ehlukene ye-MCU, sibonga i-STM32Cube
• Imigomo yelayisense yamahhala, esebenziseka kalula.
• Ulwazi lwakamuva luyatholakala ku www.st.com I-FP-SNS-STAIOTCFT

Isethaphu & Izicelo Zedemo

Software and Other Prerequisites

I-FP-SNS-STAIOTCFT
Kopisha i.zip file okuqukethwe kufolda ku-PC yakho. Iphakheji izoqukatha ikhodi yomthombo example (Keil, IAR, STM32Cube IDE) based on STEVAL-STWINKT1B, STEVAL-STWINBX1 and STEVAL-MKBOXPRO.

Setha Ngaphezuluview

Izimfuneko ze-HW nokusethwa kwe-STEVAL-STWINKT1B

• 1x STEVAL-STWINKT1B evaluation board
• Laptop/PC with Windows 10, 11
• 2 x microUSB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

Izimfuneko ze-HW nokusethwa kwe-STEVAL-STWINBX1

• 1x STEVAL-STWINBX1 evaluation board
• Laptop/PC with Windows 10, 11
• 1 x microUSB cable
• 1x type-C USB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

Izimfuneko ze-HW nokusethwa kwe-STEVAL-MKBOXPRO

• 1x STEVAL-MKBOXPRO evaluation board
• Laptop/PC with Windows 10, 11
• 1 x microUSB cable
• 1x type-C USB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

Qala ukubhala amakhodi emizuzwini embalwa nje

www.st.com/stm32ode

Ukuxazulula inkinga kwe-STEVAL-MKBOXPRO

Lapho ibhodi liqala, kuwo wonke ama-examples, the board will use the Orange LED for showing that everything is well initialized and it’s working.

Demo Applications: AI Inertial

I-FP-SNS-STAIOTCFT (AI Inertial)

STEVAL-MKBOXPRO – STWINKT1B – STWINBX1

The purpose of this application is to show an inference application on the Machine Learning Core and on MCU, ISPU.  For all the development boards the application starts streaming directly results regarding a classification of an Asset Tracking Scenario, but in principle any MLC application can be used by simply loading a new configuration by means of a specific PnPL command The Smart Asset Tracking scenario is the same displayed in the Portal of ST AIoT Craft.

Amadokhumenti Nezinsiza Ezihlobene

Wonke amadokhumenti ayatholakala kuthebhu DESIGN yemikhiqizo ehlobene webikhasi

• FP-SNS-STBOX1:
• DB: STM32Cube function pack – databrief
• UM: Getting started with the STM32Cube function pack – user manual
• Ukusethwa kwesoftware file

I-STM32 Open Development Environment

Kuphelileview

I-STM32 Open Development Environment I-Prototyping nentuthuko esheshayo, ethengekayo

The STM32 Open Development Environment (STM32 ODE) is an open, flexible, easy, and affordable way to develop innovative devices and applications based on the STM32 32-bit microcontroller family combined with other state-of-the-art ST components connected via expansion boards. It enables fast prototyping with leading-edge components that can quickly be transformed into final designs.

Ukuze uthole ulwazi olwengeziwe, sicela uvakashele www.st.com/stm32ode

Ngiyabonga

© STMicroelectronics – Wonke amalungelo agodliwe.
The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies. All other names are the property of their respective owners.

FAQS

Q: Yiziphi izici ezibalulekile ze-FP-SNS-STAIOTCFT?

A: The FP-SNS-STAIOTCFT provides simple applications for custom development on specific boards and is built on STM32Cube software technology for portability.

Q: Ngingalutholaphi ulwazi olwengeziwe mayelana nezingxenyekazi zekhompiyutha kanye nezimfuneko zesofthiwe?

A: Detailed information about the hardware and software prerequisites can be found in the setup overview isigaba semanuwali yomsebenzisi.

Q: Ngiqala kanjani ukubhala ngekhodi ngisebenzisa i-FP-SNS-STAIOTCFT?

A: To start coding with the FP-SNS-STAIOTCFT, follow the setup instructions provided in the user manual and refer to the package structure documentation for guidance.

Amadokhumenti / Izinsiza

STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box [pdf] Umhlahlandlela Womsebenzisi STM32Cube, STM32Cube Wireless Industrial Node SensorTile Box, Wireless Industrial Node SensorTile Box, Industrial Node SensorTile Box, SensorTile Box

Izithenjwa

• Imaniwali yosebenzisayo