I-Solplanet ASW SA Series I-Single Phase String Inverters Incwadi Yomsebenzisi

Amanothi kule Manuwali

Amanothi Avamile

I-Solplanet inverter iyisiguquli selanga esingaguquki esinama-trackers amathathu azimele we-MPP. Iguqula i-direct current (DC) isuka kuhlelo lwe-photovoltaic (PV) iye kugridi ethobelana ne-alternating current (AC) iphinde iyifake kugridi.

Indawo yokuqinisekisa

Leli bhukwana lichaza ukukhwezwa, ukufakwa, ukugunyazwa nokugcinwa kwama-inverter alandelayo:

• ASW5000-SA
• ASW6000-SA
• ASW8000-SA
• ASW10000-SA

Bheka wonke amadokhumenti ahambisana ne-inverter. Zigcine endaweni ekahle futhi zitholakala ngaso sonke isikhathi.

Iqembu eliqondiwe

Le manuwali ngeyabasebenzi bakagesi abaqeqeshiwe kuphela, okufanele benze imisebenzi njengoba kuchaziwe. Bonke abantu abafaka ama-inverter kumele baqeqeshwe futhi babe nolwazi ngokuphepha okujwayelekile okufanele kuqashelwe lapho besebenza ezintweni zikagesi. Abasebenzi bokufaka kumele bajwayelane nezidingo zendawo, imithetho nemithethonqubo.

Abantu abafanelekile kumele babe namakhono alandelayo:

• Ulwazi lokuthi i-inverter isebenza futhi isebenza kanjani
• Ukuqeqeshwa kokuthi ungabhekana kanjani nezingozi nobungozi obuhambisana nokufaka, ukulungisa nokusebenzisa izinto zikagesi kanye nokufaka
• Ukuqeqeshwa ekufakweni nasekusebenziseni imishini kagesi
• Ulwazi lwayo yonke imithetho esebenzayo, amazinga neziqondiso
• Ulwazi nokuhambisana nalo mbhalo kanye nalo lonke ulwazi lokuphepha

Izimpawu ezisetshenziswe kule manuwali

Imiyalelo yokuphepha izogqanyiswa ngezimpawu ezilandelayo:

UBUNGOZI bukhomba isimo esiyingozi okuthi uma singagwenywa siholele ekufeni noma ekulimaleni okubi kakhulu.

ISEXWAYISO sibonisa isimo esiyingozi okuthi uma singagwenywa, singaholela ekufeni noma ekulimaleni okubi kakhulu.

UKUQAPHELA kukhombisa isimo esiyingozi, okuthi uma singagwenywa, siphumele ekulimaleni okungatheni noma okulingene.

ISAZISO sikhombisa isimo okuthi uma singagwenywa, singaholela ekulimaleni kwempahla.

ULWAZI olubalulekile esihlokweni noma umgomo othile, kodwa aluhambisani nezokuphepha.

Ukuphepha

Ukusetshenziswa okuhlosiwe

1. Isiguquli siguqula okwamanje okuqondile kusuka kuhlelo lwe-PV kuya kugridi eshintshanayo yamanje.
2. I-inverter ifanele ukusetshenziswa kwangaphakathi nangaphandle.
3. I-inverter kumele isetshenziswe kuphela ngama-PV arrays (amamojula e-PV kanye ne-cabling) yesigaba sokuvikela II, ngokuhambisana ne-IEC 61730, isigaba sesicelo A. Ungaxhumi noma yimiphi imithombo yamandla ngaphandle kwamamojula e-PV ku-inverter.
4. Amamojula e-PV anamandla aphezulu okuya phansi kufanele asetshenziswe kuphela uma amandla awo okuhlanganisa engaphansi kuka-1.0μF.
5. Lapho amamojula e-PV echayeka elangeni, i-DC voltage inikezwa inverter.
6. Lapho uklama uhlelo lwe-PV, qinisekisa ukuthi amanani ahambisana nebanga lokusebenza elivunyelwe lazo zonke izingxenye ngaso sonke isikhathi.
7. Umkhiqizo kufanele usetshenziswe kuphela emazweni lapho ugunyazwe khona noma ukhishwe i-AISWEI kanye no-opharetha wegridi.
8. Sebenzisa lo mkhiqizo kuphela ngokuhambisana nolwazi olunikezwe kula madokhumenti kanye namazinga neziqondiso ezisebenzayo endaweni. Noma yisiphi esinye isicelo singadala ukulimala komuntu siqu noma ukulimala kwempahla.
9. Ilebula yohlobo kufanele ihlale inamathele unomphela kumkhiqizo.
10. Ama-inverters akufanele asetshenziswe ekuhlanganiseni kwezigaba eziningi.

Ulwazi olubalulekile lokuphepha

Ingozi empilweni ngenxa yokushaqeka kukagesi lapho kuthintwa izingxenye ezibukhoma noma izintambo.

• Wonke umsebenzi we-inverter kufanele wenziwe kuphela izisebenzi eziqeqeshiwe ezifunde futhi zaqonda ngokugcwele yonke imininingwane yokuphepha equkethwe kule manuwali.
• Ungawuvuli umkhiqizo.
• Izingane kufanele zigadwe ukuze kuqinisekiswe ukuthi azidlali ngale divayisi.

Ingozi empilweni ngenxa yevolumu ephezulutagUhlu lwe-PV.

Uma kuvezwe elangeni, i-PV array ikhiqiza i-DC voltage ekhona kumakhondaktha e-DC kanye nezingxenye ezibukhoma ze-inverter. Ukuthinta amakhondatha e-DC noma izingxenye ezibukhoma kungaholela ekushayweni kukagesi okubulalayo. Uma unqamula izixhumi ze-DC ku-inverter ngaphansi komthwalo, i-arc kagesi ingase yenzeke okuholela ekushaqekeni kukagesi nokusha.

• Ungathinti iziphetho zekhebula ezingavalekile.
• Ungathinti ama-conductor e-DC.
• Ungathinti noma yiziphi izingxenye ezibukhoma ze-inverter.
• Yenza i-inverter ifakwe, ifakwe futhi ithunyelwe kuphela ngabantu abaqeqeshiwe abanamakhono afanele.
• Uma kwenzeka iphutha, lilungiswe abantu abaqeqeshiwe kuphela.
• Ngaphambi kokwenza noma yimuphi umsebenzi ku-inverter, yinqamule kuwo wonke umthamotage imithombo njengoba kuchazwe kulo mbhalo (bona Isigaba 9 “Ukunqamula I-Inverter ku-Voltage Imithombo”).

Ingozi yokulimala ngenxa yokushaqeka kukagesi.

Ukuthinta imojula ye-PV engagxiliwe noma ifreyimu ye-array kungabangela ukushaqeka kukagesi okubulalayo.

• Xhuma futhi ugaye amamojula e-PV, ifreyimu ye-array kanye nezindawo eziqhutshwa ngogesi ukuze kube nokuqhutshwa okuqhubekayo.

Ingozi yokusha ngenxa yezingxenye ezishisayo ezivalekile.

Ezinye izingxenye zendawo ebiyelwe zingashisa ngesikhathi sokusebenza.

• Ngesikhathi sokusebenza, ungathinti noma yiziphi izingxenye ngaphandle kwesivalo esivalekile se-inverter.

Ukulimala kwe-inverter ngenxa yokukhishwa kwe-electrostatic.

Izingxenye zangaphakathi ze-inverter zingalimala ngokungenakulungiseka ngokukhipha i-electrostatic.

• Zithobe ngaphambi kokuthi uthinte noma iyiphi ingxenye.

Izimpawu kulebula

Ukuqaqa

Ububanzi bokulethwa

Hlola ngokucophelela zonke izingxenye. Uma kukhona okushodayo, xhumana nomthengisi wakho.

Ihlola umonakalo wezokuthutha

Hlola ngokucophelela ukupakishwa ngesikhathi sokulethwa. Uma ubona noma yimuphi umonakalo ephaketheni okhombisa ukuthi inverter yonakele, yazisa inkampani yezokuthutha enomthwalo wemfanelo ngokushesha. Sizokujabulela ukukusiza uma kudingeka.

Ukukhweza

Izimo ze-ambient

1. Qiniseka ukuthi i-inverter ifakwe endaweni lapho izingane zingafinyeleleki khona.
2. Faka i-inverter ezindaweni lapho ingenakuthintwa khona ungaqondile.
3. Faka i-inverter endaweni ephezulu yethrafikhi lapho iphutha lingase libonakale khona.
4. Qinisekisa ukufinyelela okuhle ku-inverter ukuze kufakwe kanye nesevisi engenzeka.
5. Qinisekisa ukuthi ukushisa kungahlakazeka, bheka imvume encane elandelayo ezindongeni, amanye ama-inverter, noma izinto:
   
6. Izinga lokushisa le-ambient liyanconywa libe ngaphansi kuka-40°C ukuze kuqinisekiswe ukusebenza kahle.
7. Ncoma ukufaka i-inverter ngaphansi kwesayithi enomthunzi wesakhiwo noma ukhweze i-awning ngaphezu kwe-inverter.
8. Gwema ukubeka inverter ekukhanyeni kwelanga okuqondile, imvula neqhwa ukuze uqinisekise ukusebenza kahle nokwelula impilo yesevisi.
   
9. Indlela yokukhweza, indawo nendawo kufanele ifanele isisindo nobukhulu be-inverter.
10. Uma ifakwe endaweni yokuhlala, sincoma ukufaka i-inverter endaweni eqinile. I-Plasterboard nezinto ezifanayo azinconywa ngenxa yokudlidliza okuzwakalayo lapho kusetshenziswa.
11. Ungabeki noma yiziphi izinto ku-inverter.
12. Ungayimbozi i-inverter.

Ukukhetha indawo yokukhweza

Ingozi empilweni ngenxa yomlilo noma ukuqhuma.

• Ungabeki i-inverter ezintweni zokwakha ezivuthayo.
• Ungafaki i-inverter ezindaweni lapho kugcinwa khona izinto ezivuthayo.
• Ungayikhwezi i-inverter ezindaweni lapho kunengozi yokuqhuma.

1. Faka i-inverter iqonde phezulu noma utshekele emuva ngobuningi obungu-15°.
2. Ungalokothi ukhweze isiguquli esitshekele phambili noma emaceleni.
3. Ungalokothi ukhweze i-inverter ngokuvundlile.
4. Faka i-inverter ezingeni leso ukuze wenze kube lula ukusebenza nokufunda isibonisi.
5. Indawo yokuxhuma ugesi kufanele ibheke phansi.

Ukukhweza inverter ngebakaki odongeni

Ingozi yokulimala ngenxa yesisindo se-inverter.

• Uma ukhweza, qaphela ukuthi inverter inesisindo esingaba ngu-18.5kg.

Izinqubo zokukhweza:

1. Sebenzisa ubakaki osodongeni njengesifanekiso sokubhola bese umaka izindawo zokubhoboza izimbobo. Bamba izimbobo ezi-2 nge-10 mm drill. Imigodi kumele ibe ngu-70 mm ukushona. Gcina i-drill imile odongeni, futhi ubambe i-drill inganyakazi ukuze ugweme izimbobo ezitshekile.
   
   
   Ingozi yokulimala ngenxa ye-inverter iwela phansi.
   • Ngaphambi kokufaka amahange odongeni, kala ukujula nebanga lezimbobo.
   • Uma amanani akalwayo engahlangabezani nezidingo zembobo, bhoboza kabusha imigodi.
2. Ngemuva kokubhoboza izimbobo odongeni, faka amahange ngezikulufu ezintathu emigodini, bese unamathisela ubakaki obekwe odongeni usebenzisa izikulufu ezizithephayo ezilethwe nge-inverter.
   
3. Misa futhi ulengise i-inverter kubakaki odongeni uqinisekise ukuthi izigxobo ezimbili ezitholakala ezimbanjeni zangaphandle ze-inverter zifakwe ezindaweni ezihlukene kubakaki odongeni.
   
4. Hlola izinhlangothi zombili ze-sink yokushisa ukuze uqinisekise ukuthi isendaweni ngokuphephile. faka isikulufu esisodwa esingu-M5x12 ngasinye embotsheni yesikulufu esingezansi nhlangothi zombili ze-inverter anchorage bracket ngokulandelanayo futhi uziqinise.
   
5. Uma i-conductor yesibili evikelayo idingeka endaweni yokufaka, gaya inverter futhi uyivikele ukuze ingakwazi ukwehla kusukela endlini (bheka isigaba 5.4.3 "Uxhumano lwesibili oluvikelayo lwesisekelo").

Hlukanisa i-inverter ngokulandelana okuphambene.

Ukuxhumana Ngogesi

Ukuphepha

Ingozi empilweni ngenxa yevolumu ephezulutagUhlu lwe-PV.

Uma kuvezwe elangeni, i-PV array ikhiqiza i-DC voltage ekhona kumakhondaktha e-DC kanye nezingxenye ezibukhoma ze-inverter. Ukuthinta amakhondatha e-DC noma izingxenye ezibukhoma kungaholela ekushayweni kukagesi okubulalayo. Uma unqamula izixhumi ze-DC ku-inverter ngaphansi komthwalo, i-arc kagesi ingase yenzeke okuholela ekushaqekeni kukagesi nokusha.

• Ungathinti iziphetho zekhebula ezingavalekile.
• Ungathinti ama-conductor e-DC.
• Ungathinti noma yiziphi izingxenye ezibukhoma ze-inverter.
• Yenza i-inverter ifakwe, ifakwe futhi ithunyelwe kuphela ngabantu abaqeqeshiwe abanamakhono afanele.
• Uma kwenzeka iphutha, lilungiswe abantu abaqeqeshiwe kuphela.
• Ngaphambi kokwenza noma yimuphi umsebenzi ku-inverter, yinqamule kuwo wonke umthamotage imithombo njengoba kuchazwe kulo mbhalo (bona Isigaba 9 “Ukunqamula I-Inverter ku-Voltage Imithombo”).

Ingozi yokulimala ngenxa yokushaqeka kukagesi.

• I-inverter kufanele ifakwe kuphela ngabasebenza ngogesi abaqeqeshiwe nabagunyaziwe.
• Konke ukufakwa kukagesi kufanele kwenziwe ngokuhambisana namazinga Kazwelonke Wemithetho Yezintambo kanye nawo wonke amazinga neziqondiso ezisebenzayo endaweni.

Ukulimala kwe-inverter ngenxa yokukhishwa kwe-electrostatic.

Ukuthinta izingxenye ze-elekthronikhi kungabangela ukulimala noma ukucekela phansi i-inverter ngokukhishwa kwe-electrostatic.

• Zithobe ngaphambi kokuthi uthinte noma iyiphi ingxenye.

Isakhiwo sesistimu samayunithi ngaphandle kokushintshwa kwe-DC okudidiyelwe

Amazinga endawo noma amakhodi angase adinge ukuthi amasistimu e-PV afakelwe iswishi ye-DC yangaphandle ohlangothini lwe-DC. Iswishi ye-DC kufanele ikwazi ukunqamula ngokuphephile ivolumu ye-open-circuittage yohlu lwe-PV kanye nendawo yokuphepha engu-20%.
Faka iswishi ye-DC ochungechungeni ngalunye lwe-PV ukuze uhlukanise uhlangothi lwe-DC lwe-inverter. Sincoma ukuxhunywa kukagesi okulandelayo:

Kuphelileview yendawo yokuxhumana

Ukuxhumeka kwe-AC

Ingozi empilweni ngenxa yevolumu ephezulutagku-inverter.

• Ngaphambi kokusungula uxhumano lukagesi, qiniseka ukuthi isiqhephuki esincane sivaliwe futhi asikwazi ukuphinda sisebenze.

Imibandela yokuxhumeka kwe-AC

Izidingo zekhebula

Uxhumano lwegridi lusungulwa kusetshenziswa amakhondatha amathathu (L, N, kanye ne-PE).
Sincoma ukucaciswa okulandelayo kwentambo yethusi eboshiwe. Izindlu zepulaki ye-AC zinokubhala ngobude bokukhumula ikhebula.

Izingxenye eziphambanayo ezinkulu kufanele zisetshenziselwe izintambo ezinde.

Idizayini yekhebula

I-conductor cross-section kufanele ilinganiswe ukuze kugwenywe ukulahleka kwamandla kumakhebuli angaphezu kuka-1% wamandla okukhiphayo alinganiselwe.
I-impedance ephezulu yegridi yekhebula ye-AC yenza kube lula ukunqamula kugridi ngenxa yevolthi eyeqiletage endaweni yokuphakelayo.
Ubude bobude bekhebula obukhulu buncika ku-conductor cross-section ngale ndlela elandelayo:

I-conductor cross-section edingekayo incike esilinganisweni se-inverter, izinga lokushisa le-ambient, indlela yomzila, uhlobo lwekhebula, ukulahleka kwekhebula, izidingo zokufaka ezisebenzayo zezwe lokufakwa, njll.

Ukuvikelwa kwamanje okuyinsalela

Umkhiqizo ufakwe iyunithi yokuqapha yamanje ehlangene yendawo yonke ezwelayo ngaphakathi. I-inverter izonqamuka ngokushesha emandleni kagesi ngokushesha nje lapho iphutha likhona ngevelu eleqa umkhawulo.

Uma idivayisi yangaphandle yokuvikela eyinsalela-yamanje idingeka, sicela ufake uhlobo lwe-B lwedivayisi yokuvikela insalela enomkhawulo wokuvikela ongekho ngaphansi kuka-100mA.

I-Overvoltagisigaba

I-inverter ingasetshenziswa kumagridi we-overvoltage isigaba III noma esingaphansi ngokuhambisana ne-IEC 60664-1. Lokhu kusho ukuthi ingaxhunywa unomphela endaweni yokuxhuma igridi esakhiweni. Ekufakweni okubandakanya umzila wekhebula wangaphandle omude, izinyathelo ezengeziwe zokunciphisa ukugcwala ngokweqiletage isigaba IV kuya ku-overvoltagKudingeka isigaba III.

AC wesifunda full

Ezinhlelweni ze-PV ezinama-inverter amaningi, vikela i-inverter ngayinye nge-breaker circuit ehlukile. Lokhu kuzovimbela ivolumu eseletage ukuba khona kukhebuli ehambisanayo ngemva kokunqanyulwa. Akukho mthwalo womthengi okufanele usetshenziswe phakathi kwe-AC circuit breaker kanye ne-inverter.
Ukukhethwa kwesilinganiso se-AC circuit breaker kuncike ekwakhiweni kwezintambo (indawo ye-wire cross-section), uhlobo lwekhebula, indlela yezintambo, izinga lokushisa elizungezile, isilinganiso samanje se-inverter, njll. Ukwehliswa kwesilinganiso se-AC circuit breaker kungase kudingeke ngenxa yokuzenzela ukushisisa noma uma kuvezwe ukushisa. Umkhawulo wamanje okukhiphayo kanye nokuvikelwa okuphezulu kokuphumayo okudlulele kwama-inverters kungatholakala esigabeni 10 "Idatha yobuchwepheshe".

Ukuqapha umqhubi womhlaba

I-inverter ifakwe idivayisi yokuqapha ikhondatha ephansi. Le divayisi yokuqapha ikhondatha yaphansi ithola uma kungekho mqhubi waphansi oxhunyiwe futhi inqamule isiguquli kugridi yokusetshenziswa uma lokhu kunjalo. Ngokuya ngendawo yokufaka nokucushwa kwegridi, kungase kube ukuhlakanipha ukuvala ukuqapha komqhubi ophansi. Lokhu kuyadingeka, ngokwesiboneloample, kusistimu ye-IT uma ingekho ikhondatha engathathi hlangothi ekhona futhi uhlose ukufaka isiguquli phakathi kwamakhondatha wemigqa emibili. Uma ungaqiniseki ngalokhu, xhumana no-opharetha wegridi yakho noma i-AISWEI.

Ukuphepha ngokuhambisana ne-IEC 62109 lapho ukuqapha komqhubi ophansi kwenziwa kungasebenzi.

Ukuze uqinisekise ukuphepha ngokuya nge-IEC 62109 lapho ukuqapha komqhubi ophansi kwenziwa kungasebenzi, yenza esinye salezi zinyathelo ezilandelayo:

• Xhuma i-copper-wire grounding conductor ene-cross-section okungenani engu-10 mm² kokufakwa esihlahleni kwesixhumi se-AC.
• Xhuma isisekelo esengeziwe okungenani esinesigaba esiphambanayo nesixhumi se-grounding conductor kokokufaka kwesixhumi se-AC. Lokhu kuvimbela i-touch current uma kwenzeka i-conductor ephansi efakwe esihlahleni sesixhumi se-AC ehluleka.

Uxhumano lwetheminali ye-AC

Ingozi yokulimala ngenxa yokushaqeka kukagesi nomlilo obangelwa ukuvuza okukhulu kwamandla.

• I-inverter kufanele isekelwe ngokuthembekile ukuze kuvikelwe impahla nokuphepha komuntu siqu.
• Intambo ye-PE kufanele ibe yinde ngo-2 mm kune-L,N ngesikhathi sokuhlubula umgodla wangaphandle wekhebula le-AC.

Ukulimala kophawu lwekhava ezimeni ezingaphansi kweziro.

Uma uvula ikhava esimweni esingaphansi kweziro, ukuvaleka kwekhava kungalimala. Lokhu kungaholela umswakama ukungena ku-inverter.

• Ungavuli ikhava ye-inverter emazingeni okushisa angaphansi kuka -5℃.
• Uma ungqimba lweqhwa kwakheka uphawu lwekhava kuma-comditions angaphansi kweziro, lususe ngaphambi kokuvula inverter (isb ngokuncibilikisa iqhwa ngomoya ofudumele). Qaphela umthethonqubo wokuphepha osebenzayo.

Inqubo:

1. Vala i-circuit breaker encane futhi uyivikele ngokumelene nokuvuswa futhi ungaqondile.
2. Nciphisa u-L no-N ngo-2 mm ngayinye, ukuze umqhubi ophansi abe ngu-3 mm ubude. Lokhu kuqinisekisa ukuthi i-conductor yaphansi ingeyokugcina ukudonswa kutheminali yesikulufu uma kwenzeka kuba nokucindezeleka.
3. Faka i-conductor ku-ferrule acc efanelekile. ku-DIN 46228-4 bese unqamula othintana naye.
   
4. Faka i-PE, N kanye ne-L conductor ngokusebenzisa indlu yesixhumi se-AC bese uzinqamulela kumatheminali ahambisanayo etheminali yesixhumi se-AC futhi uqiniseke ukuthi uwafaka aze afike ekugcineni ngokulandelana njengoba kubonisiwe, bese uqinisa izikulufu ngokhiye olingana nosayizi we-hex. nge-torque ephakanyisiwe engu-2.0 Nm.
   
5. Vikela ukuhlangana komzimba wesixhumi kusixhumi, bese uqinisa indlala yekhebula emzimbeni wesixhumi.
   
6. Xhuma ipulaki yesixhumi se-AC kutheminali ye-inverter's AC okukhiphayo.
   

Ukuxhumana kwesisekelo sesibili sokuvikela

Esimeni sokusebenza kohlobo lweGridi ye-Delta-IT, ukuze kuqinisekiswe ukuthobela ukuphepha ngokuhambisana ne-IEC 62109, lesi sinyathelo esilandelayo kufanele sithathwe:
Umqhubi wesibili wokuvikela umhlaba/umhlabathi, onobubanzi okungenani obuyi-10 mm2 futhi wenziwe ngethusi, kufanele uxhunywe endaweni ekhethiwe yomhlaba ku-inverter.

Inqubo:

1. Faka i-conductor ephansi endaweni efanele yetheminali bese unqamula othintana naye.
2. Qondanisa isikhwama setheminali ne-conductor yaphansi kusikulufu.
3. Yiqinise ngokuqinile endlini (uhlobo lwe-screwdriver: PH2, i-torque: 2.5 Nm).
   
   Ulwazi mayelana nezingxenye zesisekelo:
   

Uxhumano lwe-DC

Ingozi empilweni ngenxa yevolumu ephezulutagku-inverter.

• Ngaphambi kokuxhuma amalungu afanayo e-PV, qinisekisa ukuthi iswishi ye-DC ivaliwe futhi ayikwazi ukuphinda isebenze.
• Unganqamuli izixhumi ze-DC ezilayishiwe.

Izidingo zokuxhumeka kwe-DC

Ukusetshenziswa kwama-adaptha ka-Y ekuxhumekeni okufanayo kweyunithi yezinhlamvu.
Ama-adaptha angu-Y akufanele asetshenziselwe ukuphazamisa isekethe ye-DC.

• Ungasebenzisi ama-adaptha ka-Y endaweni eseduze ye-inverter.
• Ama-adaptha akufanele abonakale noma afinyeleleke ngokukhululekile.
• Ukuze uphazamise isekethe ye-DC, nqamula njalo isiguquli njengoba kuchazwe kulo mbhalo (bona Isigaba 9 “Ukunqamula I-Inverter kuVol.tage Imithombo”).

Izidingo zamamojula we-PV weyunithi yezinhlamvu:

• Amamojula we-PV wezintambo ezixhunyiwe kufanele abe: uhlobo olufanayo, ukuqondanisa okufanayo kanye nokutsheka okufanayo.
• Imikhawulo yokufaka ivolumutage kanye nokokufaka kwamanje kwe-inverter kufanele kulandelwe (bona Isigaba 10.1 "Idatha yokufaka ye-Technical DC").
• Ngosuku olubanda kakhulu ngokusekelwe kumarekhodi ezibalo, i-open-circuit voltagI-e yohlelo lwe-PV akumele idlule ivolumu enkulu yokufakatage ye-inverter.
• Izintambo zokuxhuma zamamojula we-PV kufanele zifakwe izixhumi ezifakwe kububanzi bokulethwa.
• Izintambo zokuxhuma ezinhle zamamojula we-PV kufanele zifakwe izixhumi ezinhle ze-DC. Izintambo zokuxhuma ezingezinhle zamamojula we-PV kumele zifakwe izixhumi ze-DC ezingezinhle.

Ukuhlanganisa izixhumi ze-DC

Ingozi empilweni ngenxa yevolumu ephezulutages kuma-conductor e-DC.
Uma kuvezwe elangeni, i-PV array ikhiqiza i-DC voltage ekhona ku-DC conductors. Ukuthinta amakhondaktha e-DC kungaholela ekushayweni kukagesi okubulalayo.

• Vala amamojula we-PV.
• Ungathinti ama-conductor e-DC.

Hlanganisa izixhumi ze-DC njengoba kuchazwe ngezansi. Qiniseka ukuthi ubheka i-polarity efanele. Izixhumi ze-DC zimakwe ngezimpawu “+” kanye ” − “.

Izidingo zekhebula:

Ikhebuli kufanele ibe yohlobo PV1-F, UL-ZKLA noma USE2 futhi ithobelane nalezi zakhiwo ezilandelayo:
 Ububanzi bangaphandle: 5 mm ukuya ku-8 mm
 I-conductor cross-section: 2.5 mm² ukuya ku-6 mm²
 Izintambo ezingashadile ezi-Qty: okungenani ezingu-7
 Okuzisholo voltage: okungenani 600V

Qhubeka kanje ukuze uhlanganise isixhumi ngasinye se-DC.

1. Khipha u-12 mm ku-insulation yekhebula.
   
2. Hola ikhebuli ehlutshiwe kusixhumi esihambisanayo sepulaki ye-DC. Cindezela i-clampi-bracket phansi kuze kube yilapho ingena ngokuzwakalayo endaweni.
   
3. Phusha inati elijikayo liye phezulu entanjeni bese uqinisa nati elijikayo. (SW15, Torque: 2.0Nm).
   
4. Qinisekisa ukuthi ikhebuli ibekwe ngendlela efanele:
   

Ukuqaqa izixhumi ze-DC

Ingozi empilweni ngenxa yevolumu ephezulutages kuma-conductor e-DC.
Uma kuvezwe elangeni, i-PV array ikhiqiza i-DC voltage ekhona ku-DC conductors. Ukuthinta amakhondaktha e-DC kungaholela ekushayweni kukagesi okubulalayo.

• Vala amamojula we-PV.
• Ungathinti ama-conductor e-DC.

Ukuze ukhiphe izixhumi nezintambo zepulaki ye-DC, sebenzisa i-screwdriver (ububanzi beblade: 3.5mm) njengenqubo elandelayo.

Ixhuma amalungu afanayo e-PV

I-inverter ingacekelwa phansi yi-overvoltage.
Uma i-voltagI-e yamayunithi ezinhlamvu idlula umthamo omkhulu wokufakwayo we-DCtage ye-inverter, ingacekelwa phansi ngenxa yokugcwala ngokweqiletage. Zonke izimangalo zewaranti ziba yize.

• Ungaxhumi izintambo ngevolthi yesekhethi evulekiletage enkulu kunomthamo omkhulu wokufakwayo we-DCtage ye-inverter.
• Hlola ukwakheka kwesistimu ye-PV.

1. Qinisekisa ukuthi i-circuit breaker ngayinye ivaliwe futhi uqinisekise ukuthi ayikwazi ukuxhunywa kabusha ngephutha.
2. Qinisekisa ukuthi iswishi ye-DC ivaliwe futhi uqinisekise ukuthi ayikwazi ukuxhunywa kabusha ngephutha.
3. Qinisekisa ukuthi alikho iphutha eliphansi kuhlu lwe-PV.
4. Hlola ukuthi isixhumi se-DC sine-polarity efanele yini.
5. Uma isixhumi se-DC sifakwe intambo ye-DC ene-polarity engalungile, isixhumi se-DC kufanele sihlanganiswe kabusha. Ikhebula le-DC kufanele njalo libe ne-polarity efana nesixhumi se-DC.
6. Qinisekisa ukuthi i-open-circuit voltagI-e yohlelo lwe-PV ayeqi ubuningi bomthamo wokufaka we-DCtage ye-inverter.
7. Xhuma izixhumi ze-DC ezihlanganisiwe ku-inverter zize zingene ngokuzwakalayo endaweni.
   

Ukulimala kwe-inverter ngenxa yomswakama kanye nokungena kothuli.

• Vala okokufaka kwe-DC okungasetshenzisiwe ukuze umswakama nothuli kungakwazi ukungena ku-inverter.
• Qiniseka ukuthi zonke izixhumi ze-DC zivaliwe ngokuvikelekile.

Ukuxhumana kwemishini yokuxhumana

Ingozi empilweni ngenxa yokushaqeka kukagesi lapho kuthintwa izingxenye ezibukhoma.

• Nqamula inverter kuwo wonke umthamotage imithombo ngaphambi kokuxhuma ikhebula lenethiwekhi.

Ukulimala kwe-inverter ngenxa yokukhishwa kwe-electrostatic.
Izingxenye zangaphakathi ze-inverter zingalimala ngokungenakulungiseka ngokukhipha i-electrostatic

• Zithobe ngaphambi kokuthi uthinte noma iyiphi ingxenye.

RS485 uxhumano lwekhebula

Iphinikhodi yesokhethi ye-RJ45 imi kanje:

Ikhebuli yenethiwekhi ehlangana ne-EIA/TIA 568A noma 568B ejwayelekile kufanele imelane ne-UV uma izosetshenziswa ngaphandle.

Imfuneko yekhebula :

I-Shielding wire
 CAT-5E noma ngaphezulu
 Ukumelana ne-UV ukuze kusetshenziswe ngaphandle
 Ikhebula le-RS485 eliphakeme ubude li-1000m

Inqubo:

1. Khipha insiza yokulungisa ikhebula ephaketheni.
2. Khipha nati elijikayo lendlalo yekhebula le-M25, khipha ipulaki yokugcwalisa endlaleni yekhebula futhi uyigcine kahle. Uma kunekhebula yenethiwekhi eyodwa kuphela, sicela ugcine ipulaki yokugcwalisa emgodini osele wendandatho yokuvala ngokumelene nokungena kwamanzi.
3. Umsebenzi wephinikhodi yekhebula ye-RS485 njengoba ingezansi, khumula intambo njengoba kuboniswe emfanekisweni, bese unqamula ikhebula kusixhumi se-RJ45 (ngokwe-DIN 46228-4, ehlinzekwe ikhasimende):
   
4. Khipha isikulufu sembobo yembobo yokuxhumana ngokulandelana komcibisholo olandelayo bese ufaka ikhebuli yenethiwekhi kuklayenti lokuxhumana le-RS485 elinamathiselwe.
   
5. Faka intambo yenethiwekhi kutheminali yokuxhumana ehambisanayo ye-inverter ngokuya ngokulandelana komcibisholo, qinisa umkhono wentambo, bese uqinisa indlala.
   

Hlukanisa ikhebula lenethiwekhi ngokulandelana okuphambene.

Ukuxhumeka kwekhebula lemitha ehlakaniphile

Umdwebo wokuxhumana

Inqubo:

1. Khulula indlala yesixhumi. Faka amakhondakta acijile kumatheminali ahambisanayo bese uqinisa izikulufu nge-screwdriver njengoba kukhonjisiwe. I-Torque: 0.5-0.6 Nm
   
2. Susa isivalo sothuli kutheminali yesixhumi semitha, bese uxhuma ipulaki yemitha.
   

Ukuxhumeka kwe-WiFi/4G stick

1. Khipha i-modular ye-WiFi/4G efakwe kububanzi bokulethwa.
2. Namathisela i-modular ye-WiFi embobeni yoxhumano esendaweni bese uyiqinisa ethekwini ngesandla nge-nati ku-modular. Qiniseka ukuthi i-modular ixhumeke ngokuvikelekile futhi ilebula kumodular ingabonakala.
   

Ukuxhumana

Ukuqapha uhlelo nge-WLAN/4G

Umsebenzisi angakwazi ukuqapha i-inverter ngokusebenzisa imojula yenduku ye-WiFi/4G yangaphandle. Umdwebo wokuxhuma phakathi kwe-inverter ne-inthanethi uboniswa njengokulandela izithombe ezimbili, zombili izindlela ziyatholakala. Sicela uqaphele ukuthi induku ngayinye ye-WiFi/4G ingaxhumeka kuma-inverter angu-5 kuphela ku-method1.

Indlela 1 i-inverter eyodwa kuphela ene-4G/WiFi Stick, enye inverter ixhunywe ngekhebula le-RS 485.

I-Mehod 2 yonke inverter ene-4G/WiFi Stick, yonke inverter ingaxhuma ku-inthanethi.
Sinikeza inkundla yokuqapha ekude ebizwa ngokuthi "i-AiSWEI cloud". Ungakwazi kabushaview ulwazi ku webisiza (www.aisweicloud.com).

Ungakwazi futhi ukufaka uhlelo lwe-“Solplanet APP” kumakhalekhukhwini ohlakaniphile usebenzisa i-Android noma amasistimu wokusebenza we-iOS. Uhlelo lokusebenza kanye nemanuwali kungalandwa kuvuliwe webisiza (https://www.solplanet.net).

Ukulawula amandla okusebenzayo nge-Smart meter

I-inverter ingakwazi ukulawula ukuphuma kwamandla asebenzayo ngokuxhuma imitha ehlakaniphile, isithombe esilandelayo imodi yokuxhuma uhlelo nge-WiFi stick.

Imitha ehlakaniphile kufanele isekele iphrothokholi ye-MODBUS enesilinganiso se-baud esingu-9600 kanye nesethi yekheli

1. Imitha ehlakaniphile njengenhla yendlela yokuxhuma ye-SDM230-Modbus kanye nendlela yokubeka izinga le-baud ye-modbus sicela ubhekisele kumanuwali ayo.

Isizathu esingaba khona sokwehluleka ukuxhumana ngenxa yokuxhumana okungalungile.

• Induku ye-WiFi isekela isiguquli esisodwa kuphela ukwenza isilawuli samandla esisebenzayo.
• Ubude bonke bekhebula ukusuka ku-inverter ukuya ku-smart meter buyi-100m.

Umkhawulo wamandla osebenzayo ungasethwa kuhlelo lokusebenza lwe-“Solplanet APP”, imininingwane ingatholakala kubhukwana lomsebenzisi le-AISWEI APP.

Izindlela zokuphendula ezifunwa yi-Inverter (DRED)

Incazelo yohlelo lokusebenza lwe-DRM.

• Kusebenza kuphela ku-AS/NZS4777.2:2020.
• I-DRM0, i-DRM5, i-DRM6, i-DRM7, i-DRM8 iyatholakala.

I-inverter izothola futhi iqalise impendulo kuyo yonke imiyalo yempendulo yesidingo esisekelwayo, izindlela zokuphendula zokufuna zichazwa kanje:

Izabelo zephinikhodi yesokhethi ye-RJ45 yezindlela zokuphendula ngokufunwa kanje:

Uma kudingeka ukwesekwa kwama-DRM, isiguquli kufanele sisetshenziswe ngokuhlanganyela ne-AiCom. Idivayisi Evumela Ukusabela Kwesidingo (DRED) ingaxhunywa embobeni ye-DRED ku-AiCom ngekhebula engu-RS485. Ungavakashela i- webisiza (www.solplanet.net) ukuze uthole ulwazi olwengeziwe futhi ulande imanuwali yomsebenzisi ye-AiCom.

Ukuxhumana namadivayisi ezinkampani zangaphandle

Ama-inverter e-Solplanet angaphinda axhumane nedivayisi eyodwa esikhundleni se-RS485 noma i-WiFi stick, isimiso sokuxhumana i-modbus. Ukuze uthole ulwazi olwengeziwe, sicela uthinte Isevisi

I-alamu yephutha lomhlaba

Lesi siguquli sihambisana ne-IEC 62109-2 isigatshana 13.9 sokuqapha i-alamu yamaphutha omhlaba. Uma kwenzeka i-Earth Fault Alarm, inkomba ye-LED enombala obomvu izokhanya. Ngesikhathi esifanayo, ikhodi yephutha 38 izothunyelwa ku-AISWEI Cloud. (Lo msebenzi utholakala kuphela e-Australia naseNew Zealand)

Ukugunyaza

Ingozi yokulimala ngenxa yokufakwa okungalungile.

• Sincoma kakhulu ukuthi uhlole ngaphambi kokusebenza ukuze ugweme ukulimala okungaba khona ocingweni oludalwe ukufakwa okungalungile.

Amasheke kagesi

Yenza izivivinyo zikagesi eziyinhloko ngale ndlela elandelayo:

1. Hlola uxhumano lwe-PE nge-multimeter: qiniseka ukuthi indawo yensimbi eveziwe ye-inverter inokuxhumana okuphansi.
   
   Ingozi empilweni ngenxa yobukhona be-DC voltage.
   • Ungathinti izingxenye ze-sub-structure kanye nohlaka lwe-PV yamalungu.
   • Gqoka izinto zokuzivikela ezifana namagilavu ​​avikelayo.
2. Bheka ivolumu ye-DCtage amanani: hlola ukuthi DC voltagI-e yeyunithi yezinhlamvu aweqi imikhawulo evunyelwe. Bheka Isigaba 2.1 "Ukusetshenziswa okuhlosiwe" mayelana nokuklama isistimu ye-PV yevolumu ephezulu evunyelwe ye-DCtage.
3. Hlola i-polarity ye-DC voltage: qiniseka ukuthi i-DC voltagU-e une-polarity efanele.
4. Hlola ukufakwa kwe-PV array ukuze iphansi nge-multimeter: qiniseka ukuthi ukumelana nokufakwa emhlabathini kukhulu kuno-1 MOhm.
   
   Ingozi empilweni ngenxa yokuba khona kwe-AC voltage.
   • Thinta kuphela i-insulation yezintambo ze-AC.
   • Gqoka izinto zokuzivikela ezifana namagilavu ​​avikelayo.
5. Hlola igridi voltage: hlola ukuthi igridi voltage endaweni yokuxhumana ye-inverter ihambisana nenani elivunyelwe.

Amasheke omshini

Yenza ukuhlola okuyinhloko komshini ukuze uqinisekise ukuthi i-inverter ayinamanzi:

1. Qiniseka ukuthi i-inverter ifakwe kahle ngobakaki odongeni.
2. Qiniseka ukuthi ikhava igxunyekwe ngendlela efanele.
3. Qiniseka ukuthi ikhebuli yokuxhumana nesixhumi se-AC kufakwe izintambo ngendlela efanele futhi kwaqiniswa.

Ukuhlola ikhodi yokuphepha

Ngemva kokuqeda ukuhlola kukagesi nokomshini, vula i-DC-switch. Khetha ikhodi efanelekile yokuphepha ngokuya ngendawo yokufaka. ngicela uvakashele webisiza (www.solplanet.net ) bese ulanda imanuwali ye-Solplanet APP ukuze uthole ulwazi oluningiliziwe. ungabheka Ukusethwa Kwekhodi Yokuphepha kanye nenguqulo yeFirmware ku-APP.

Ama-inverter e-Solplanet athobela ikhodi yendawo yokuphepha lapho ephuma embonini.
Emakethe yase-Australia, i-inverter ayikwazi ukuxhunywa kugridi ngaphambi kokuthi indawo ehlobene nokuphepha isethwe. Sicela ukhethe kokuthi Isifunda sase-Australia A/B/C ukuze uthobele AS/NZS 4777.2:2020, futhi uxhumane no-opharetha wegridi kagesi yangakini yasendaweni ongakhetha kuyo.

Qalisa

Ngemuva kokuhlolwa kwekhodi yokuphepha, vula i-circuit breaker encane. Once the DC input voltagi-e iphakeme ngokwanele futhi izimo zokuxhuma igridi ziyahlangatshezwa, i-inverter izoqala ukusebenza ngokuzenzakalelayo. Ngokuvamile, kunezifunda ezintathu ngesikhathi sokusebenza:
Ilindile: Lapho ivolumu yokuqalatagI-e yeyunithi yezinhlamvu inkulu kunevolumu encane yokufaka ye-DCtage kodwa iphansi kunomthamo wokufaka we-DC wokuqalisatage, i-inverter ilinde ivolumu eyanele yokufaka ye-DCtage futhi ayikwazi ukuphakela amandla kugridi.
Iyahlola: Lapho ivolumu yokuqalatagi-e yeyunithi yezinhlamvu idlula ivolumu yokufaka ye-DC yokuqalisatage, i-inverter izohlola izimo zokudla ngesikhathi esisodwa. Uma kukhona okungalungile ngesikhathi sokuhlola, i-inverter izoshintshela kumodi ethi "Iphutha".
Okuvamile: Ngemva kokuhlola, i-inverter izoshintshela kusimo "Esivamile" futhi inikeze amandla kugridi. Ngezikhathi zemisebe ephansi, i-inverter ingase iqale ngokuqhubekayo futhi ivale. Lokhu kungenxa yamandla anganele akhiqizwa amalungu afanayo e-PV.

Uma leli phutha lenzeka kaningi, sicela ushayele isevisi.

Ukuxazulula Inkinga Ngokushesha
Uma isiguquli sikwimodi ethi “Iphutha”, bhekisa kuSigaba 11 “Ukuxazulula inkinga”.

Ukusebenza

Ulwazi olunikezwe lapha luhlanganisa izinkomba ze-LED.

Kuphelileview kwephaneli

I-inverter ifakwe izinkomba ezintathu ze-LED.

Ama-LED

I-inverter ifakwe izinkomba ezimbili ze-LED "ezimhlophe" kanye "nobomvu" ezihlinzeka ngolwazi mayelana nezifunda ezihlukahlukene zokusebenza.

I-LED A:
I-LED A ikhanya lapho i-inverter isebenza ngokujwayelekile. I-LED A ivaliwe I-inverter ayiphakeli kugridi.
I-inverter ifakwe isibonisi samandla aguqukayo nge-LED A. Ngokuya ngamandla, i-LED A ishaya ngokushesha noma kancane. Uma amandla engaphansi kuka-45% wamandla, i-LED A ishaya kancane. Uma amandla amakhulu Amandla angu-45% namandla angaphansi kuka-90%, i-LED A ishaya ngokushesha. I-LED A iyakhazimula uma isiguquli sisebenza ngokuphakelayo ngamandla okungenani angu-90% wamandla.

I-LED B:
I-LED B iyakhanya phakathi nokuxhumana namanye amathuluzi isb. i-AiCom/AiManager, i-Solarlog njll. Futhi, i-LED B iyakhanya phakathi nokubuyekezwa kwe-firmware nge-RS485.

I-LED C:
I-LED C ikhanya lapho i-inverter iyekile ukufaka amandla kugridi ngenxa yephutha. Ikhodi yephutha ehambisanayo izoboniswa esibukweni.

Inqamula i-Inverter ku-Voltage Imithombo

Ngaphambi kokwenza noma yimuphi umsebenzi ku-inverter, yinqamule kuwo wonke umthamotage imithombo njengoba kuchazwe kulesi sigaba. Ngaso sonke isikhathi bambelela ngokuqinile ekulandeleni okunqunyiwe.

Ukucekelwa phansi kwedivayisi yokulinganisa ngenxa yokugcwala ngokweqiletage.

• Sebenzisa amadivaysi okulinganisa ane-DC input voltaguhla lwe-580 V noma ngaphezulu.

Inqubo:

1. Nqamula i-circuit breaker encane futhi uvikeleke ekuxhumekeni kabusha.
2. Nqamula iswishi ye-DC futhi uvikeleke ekuxhumekeni kabusha.
3. Sebenzisa i-cl yamanjeamp imitha ukuqinisekisa ukuthi awekho amakhebuli ezintambo ze-DC.
4. Khulula futhi ukhiphe zonke izixhumi ze-DC. Faka i-screwdriver ene-flat-blade noma i-screwdriver ene-engeli (ububanzi beblade: 3.5 mm) kwesinye sezikhala zama-slide bese udonsa izixhumi ze-DC ziye phansi. Ungadonsi ikhebula.
   
5. Qinisekisa ukuthi akukho voltagI-e ikhona ekufakweni kwe-DC kwe-inverter.
6. Khipha isixhumi se-AC kujeke. Sebenzisa umshini wokulinganisa ofanelekile ukuze uhlole ukuthi ayikho ivolumutagI-e ikhona kusixhumi se-AC phakathi kuka-L no-N no-L kanye ne-PE.

Idatha Yezobuchwepheshe

Idatha yokufaka ye-DC

Idatha yokuphuma kwe-AC

Imininingwane ejwayelekile

Imithethonqubo yokuphepha

Amathuluzi kanye torque

Amathuluzi ne-torque edingekayo ukuze kufakwe nokuxhunywa kukagesi.

Ukuncishiswa kwamandla

Ukuze uqinisekise ukusebenza kwe-inverter ngaphansi kwezimo eziphephile, idivayisi ingase yehlise ngokuzenzakalelayo ukuphuma kwamandla.

Ukwehliswa kwamandla kuncike kumapharamitha amaningi okusebenza afaka izinga lokushisa le-ambient kanye nevolumu yokufakatage, igridi voltage, ifrikhwensi yegridi namandla atholakala kumamojula we-PV. Le divayisi ingehlisa ukuphuma kwamandla phakathi nezikhathi ezithile zosuku ngokwala mapharamitha.

Amanothi: Amanani asekelwe kugridi elinganiselwe voltage no cos (phi) = 1.

Ukuxazulula inkinga

Uma isistimu ye-PV ingasebenzi ngokujwayelekile, sincoma izixazululo ezilandelayo zokuxazulula inkinga ngokushesha. Uma kwenzeka iphutha, i-LED ebomvu izokhanya. Kuzoba nokuboniswa kokuthi "Imilayezo Yomcimbi" kumathuluzi okuqapha. Izinyathelo zokulungisa ezihambisanayo yilezi:

Xhumana nesevisi uma uhlangabezana nezinye izinkinga ezingekho etafuleni.

Isondlo

Ngokuvamile, i-inverter ayidingi ukulungiswa noma ukulinganisa. Hlola njalo i-inverter nezintambo ukuze uthole umonakalo obonakalayo. Nqamula inverter kuyo yonke imithombo yamandla ngaphambi kokuhlanza. Hlanza indawo ebiyelwe kuyo ngendwangu ethambile. Qinisekisa ukuthi usinki wokushisa ngemuva kwe-inverter awumboziwe.

Ukuhlanza abathintwayo beswishi ye-DC

Hlanza abathintwayo beswishi ye-DC minyaka yonke. Yenza ukuhlanza ngokugibela iswishi uyivule futhi uyivale izikhathi ezi-5. Iswishi ye-DC itholakala ngezansi kwesokunxele kwendawo ebiyelwe.

Ukuhlanza usinki wokushisa

Ingozi yokulimala ngenxa yesinki esishisayo sokushisa.

• Isinki sokushisa singadlula ama-70 ℃ ngesikhathi sokusebenza. Ungathinti usinki wokushisa ngesikhathi sokusebenza.
• Linda cishe. Imizuzu engu-30 ngaphambi kokuhlanza kuze kube yilapho isinki sokushisa sehlile.
• Zithobe ngaphambi kokuthi uthinte noma iyiphi ingxenye.

Hlanza usinki wokushisa ngomoya ocindezelwe noma ibhulashi elithambile. Ungasebenzisi amakhemikhali anolaka, izihlanzi zokuhlanza noma izihlanzi ezinamandla.

Ukuze uthole umsebenzi ofanele kanye nempilo ende yesevisi, qinisekisa ukuzungeza komoya kwamahhala eduze kosinki wokushisa.

Ukugaywa kabusha nokulahlwa

Lahla okupakishwayo kanye nezingxenye ezishintshiwe ngokuya ngemithetho esebenza ezweni lapho idivayisi ifakwe khona.
Ungalahli inverter ye-ASW ngemfucuza evamile yasekhaya.

Ungawulahli umkhiqizo kanye nemfucuza yasendlini kodwa ngokuhambisana nemithetho yokulahlwa kwemfucuza kagesi esebenza endaweni yokufaka.

Isimemezelo Se-EU Sokuhambisana

ngaphakathi kobubanzi beziqondiso ze-EU

• Ukuhambelana kwe-electromagnetic 2014/30/EU (L 96/79-106, Mashi 29, 2014) (EMC).
• I-Vol ephansitage Umhlahlandlela 2014/35/EU (L 96/357-374, Mashi 29, 2014)(LVD).
• I-Radio Equipment Directive 2014/53/EU (L 153/62-106. May 22. 2014) (RED)

I-AISWEI Technology Co., Ltd. iyaqinisekisa ngalokhu ukuthi ama-inverter achazwe kuleli bhukwana ayahambisana nezidingo ezibalulekile kanye nezinye izinhlinzeko ezifanele zalezi ziqondiso ezibalulwe ngenhla.
Sonke i-EU Declaration of Conformity ingatholakala kokuthi www.solplanet.net .

Iwaranti

Ikhadi lewaranti yefekthri livalelwe nephakheji, sicela ugcine kahle ikhadi lewaranti yasembonini. Imigomo nemibandela yewaranti ingalandwa ku www.solplanet.net,uma kudingeka. Lapho ikhasimende lidinga isevisi yewaranti ngesikhathi sewaranti, ikhasimende kufanele linikeze ikhophi ye-invoyisi, ikhadi lewaranti yefekthri, futhi liqinisekise ukuthi ilebula kagesi ye-inverter iyasebenza. Uma le mibandela ingahlangatshezwana nayo, i-AISWEI inelungelo lokwenqaba ukuhlinzeka ngesevisi efanele yesiqinisekiso.

Oxhumana naye

Uma unezinkinga zobuchwepheshe mayelana nemikhiqizo yethu, sicela uxhumane nesevisi ye-AISWEI. Sidinga ulwazi olulandelayo ukuze sikunikeze usizo oludingekayo:

• Uhlobo lwedivayisi ye-Inverter
• Inverter inombolo ye-serial
• Uhlobo nenombolo yamamojula e-PV axhunyiwe
• Ikhodi yephutha
• Indawo yokukhweza
• Idethi yokufakwa
• Ikhadi lewaranti

EMEA
I-imeyili yesevisi: service.EMEA@solplanet.net

I-APAC
I-imeyili yesevisi: service.APAC@solplanet.net

I-LATAM
I-imeyili yesevisi: service.LATAM@solplanet.net

Inkampani engu-AISWEI Technology Co., Ltd
Inombolo yocingo: +86 400 801 9996
Engeza.: Igumbi 904 – 905, No. 757 Mengzi Road, Huangpu District, Shanghai 200023
https://solplanet.net/contact-us/

https://play.google.com/store/apps/details?id=com.aiswei.international

https://apps.apple.com/us/app/ai-energy/id

www.solplanet.net

Amadokhumenti / Izinsiza

Solplanet ASW SA Series Single Isigaba String Inverters [pdf] Imaniwali yosebenzisayo ASW5000, ASW10000, ASW SA Series Single Phase String Inverters, ASW SA Series, Single Phase String Inverters, Phase String Inverters, String Inverters, Inverters

Izithenjwa

• Imaniwali yosebenzisayo