I-SMARTEH LPC-2.VV4 Longo Imanuwali Yokusebenzisa Isilawuli Esihlelekayo

Inguqulo 3

SMARTEH doo / Poljubinj 114 / 5220 Tolmin / Slovenia / Ucingo.: +386(0)5 388 44 00 / i-imeyili: info@smarteh.si / www.smarteh

AMAZINGA NEZINHLELO: Amazinga, izincomo, imithethonqubo kanye nezinhlinzeko zezwe lapho imishini izosebenza khona, kufanele kubhekwe ngenkathi kuhlelwa futhi kumiswa imishini kagesi. Sebenza ku-100 .. Inethiwekhi ye-240 V AC ivunyelwe kubasebenzi abagunyaziwe kuphela.

IZIXWAYISO ZENGOZI: Amadivayisi noma amamojula kufanele avikelwe kumswakama, ukungcola kanye nokulimala ngesikhathi sokuthutha, ukugcinwa kanye nokusebenza. IMIBANDELA YESIQINISEKISO: Kuwo wonke amamojula we-LONGO LPC-2 - uma kungekho zinguquko ezenziwa kuwo futhi zixhunywe ngendlela efanele ngabasebenzi abagunyaziwe - ngokucabangela amandla amakhulu okuxhuma avunyelwe, sinikeza iwaranti yezinyanga ezingu-24 kusukela ngosuku lokuthengisa kuya kumthengi wokugcina. Uma kwenzeka izimangalo zingakapheli isikhathi sewaranti, ezisekelwe ekungasebenzini kahle kwempahla umkhiqizi unikeza ukushintshwa kwamahhala. Indlela yokubuyisela imojuli engasebenzi kahle, kanye nencazelo, ingahlelwa nommeleli wethu ogunyaziwe. Iwaranti ayibandakanyi umonakalo ngenxa yezinto zokuhamba noma ngenxa yemithethonqubo ehambisanayo yezwe engacatshangelwa, lapho imojuli ifakiwe.
Lolu cingo kufanele luxhunywe kahle ngohlelo loxhumano oluhlinzekiwe kule manuwali. Ukungaxhumani kahle kungaholela ekulimaleni kwedivayisi, umlilo noma ukulimala komuntu siqu.
VoltagI-e ocingweni ingabangela ukushaqeka kukagesi futhi ingase ibangele ukulimala komuntu siqu noma ukufa.
UNGALOKOTHI USEZE WENA LO Mkhiqizo!
Lolu cingo akufanele lufakwe ezinhlelweni ezibalulekile empilweni (isb. izinto zezokwelapha, izindiza, njll.).
Uma idivayisi isetshenziswa ngendlela engacaciswanga ngumkhiqizi, izinga lokuvikela elihlinzekwa okokusebenza lingase lonakaliswe.

Izinto ezilahlwayo zikagesi neze-elekthronikhi (WEEE) kumele ziqoqwe ngokwehlukana!

I-LONGO LPC-2 ithobelana nala mazinga alandelayo:

• I-EMC: IEC/EN 61000-6-2, IEC/EN 61000-6-4,
• I-LVD: I-IEC 61010-1:2010 (Uhlelo Lwesithathu), IEC 3-61010-2:201 (2013st Ed.)

UMENZI:
I-SMARTEH doo Poljubinj 114 5220 Tolmin Slovenia

IZIfinyezo

Kuhlungwe ngokohlelo lokuvela kudokhumenti:

dp: I-Delta P, umehluko wengcindezi
I-VAV: Ivolumu yomoya eguquguqukayo
I/O: Okokufaka okukhiphayo
I-NTC: I-coefficient yezinga lokushisa elibi
I-LED: I-diode ekhipha ukukhanya
IPHUTHA: Iphutha
I-PWR: Amandla
CHA: Ivamise ukuvula
NC: Ngokuvamile kuvalwe

DESCRIPTION

I-LPC-2.VV4 iyimojula yengcindezi ehlukile enemibono ehlukahlukene kanye nemiphumela ehlanganisiwe. Imojula iyinketho yokuzikhethela okufanele isetshenziswe ezinhlelweni zokulawula ukungena komoya njenge-VAV nokunye okufanayo.

Imojula ye-LPC-2.VV4 inikwe amandla ngokuqondile kuyunithi eyinhloko ye-LPC-2. Kukhona ama-LED amabili. Okuluhlaza (PWR) kubonisa ubukhona bokunikezwa kwamandla, futhi okubomvu (ERR) kubonisa iphutha lemojuli ye-LPC-2.VV4.

IZICI

Umfanekiso 1: LPC-2.VV4 module

Ithebula 1: Izici

Inikwa amandla yiyunithi enkulu ye-LPC-2
Isilinganiso se-DeltaP: 0 .. 500 Pa
3 x ivolumutagokokufaka kwe-analog: 0 .. 10 V
1 x okokufaka kwe-NTC 10k
1 x NTC 10k / voltagokokufaka kwe-analog: 0 .. 10 V, i-jumper iyakhetheka
8 x Okokufaka kwedijithali
1 x ivolumutagokukhiphayo kwe-analog: 0 .. 10 V
2 x Imiphumela yokudlulisa, CHA
2 x Imiphumela yokudlulisa, CHA / NC, i-jumper ekhethekayo
Ukukhwezwa kwesitimela okujwayelekile kwe-DIN EN50022-35

UKUFAKA

Uhlelo lokuxhumana

Umfanekiso 2: Isikimu soxhumano example

Umfanekiso 3: Uhlelo lokuxhuma

* QAPHELA: Kufanele kuqashelwe ngokukhethekile uma kusetshenziswa imithwalo yezinhlamvu eziguquguqukayo, isb. ama-contact, ama-solenoid, noma imithwalo edonsa ama-inrush currents aphezulu, isb. capacitive character load, incandescent lamps. Ukulayisha kwezinhlamvu ze-inductive kubangela ukweqisa kwevolumutagama-spikes koxhumana nabo abadluliselwe okukhiphayo lapho becishiwe. Kunconywa ukusebenzisa ama-circuits okucindezela afanelekile.

Imithwalo edonsa ama-inrush currents aphezulu ingase ibangele ukuphuma kwe-relay ukuthi kulayishwe ngokweqile okwesikhashana ngaphezu kwemikhawulo yayo evunyelwe, okungase kulimaze okukhiphayo, nakuba leso simo samanje esizinzile singaphakathi kwemikhawulo evunyelwe. Kulolo hlobo lomthwalo, kunconyiwe ukusetshenziswa komkhawulo wamanje we-inrush ofanelekile.

Imithwalo ye-inductive noma ye-capacitive ithonya abathintwayo abadluliselwe ngokufinyeza isikhathi sempilo yabo yokusebenza noma ingancibilikisa unomphela abathintwayo ndawonye. Cabangela ukusebenzisa olunye uhlobo lokuphumayo kwedijithali isb i-triac.

Imiyalo yokukhweza

Umfanekiso 4: Ubukhulu bezindlu

Ubukhulu ngamamilimitha.

UKUSHINTSHA OKUNGANGAPHANDLE NOMA OKUPHUMULA ISEKHISHI KANYE NOKUVIKELA OKUNGANGAPHANDLE OKWENGEZIWE: Iyunithi ivunyelwe ukuthi ixhunywe ekufakweni ngokuvikela kwamanje okunevelu engu-16 A noma ngaphansi.

ISINCOMO EKUSHINTSHENI NOMA UKUVIKELA OKUQHUBEKAYO: Kufanele kube neswishi eyinhloko yezigxobo ezimbili ekufakweni ukuze kucishwe iyunithi. Iswishi kufanele ihlangabezane nezidingo ze-IEC60947 ejwayelekile futhi ibe nenani lesilinganiso okungenani esingu-6 A. Iswishi noma isinqamuli sesekethe kufanele sibe phakathi kokufinyeleleka kalula ku-opharetha. Kufanele imakwe njengesisetshenziswa sokunqamula okokusebenza.

Konke ukuxhumeka, okunamathiselwe kwimojula nokuhlanganisa kufanele kwenziwe ngenkathi imojuli ingaxhumekile kumandla amakhulu.

Amamojula kufanele afakwe endaweni ebiyelwe ngaphandle kokuvuleka. Indawo ebiyelwe kufanele ihlinzeke ngokuvikela ngogesi nomlilo Izomelana nokuhlolwa okuguquguqukayo nge-500 g steel sphere ukusuka ebangeni elingu-1.3 m kanye nokuhlola okumile 30 N. Uma ifakwe endaweni ebiyelwe, umuntu ogunyaziwe kuphela ongaba nokhiye wokuyivula.

Imiyalo yokukhweza:

1. Vala ugesi oyinhloko.
2. Mount LPC-2.VV4 module endaweni enikeziwe ngaphakathi panel kagesi (DIN EN50022-35 rail mounting).
3. Faka amanye amamojula. Faka imojuli ngayinye kuloliwe we-DIN kuqala, bese unamathisela amamojula ndawonye ngezixhumi ze-K1 ne-K2.
4. Xhuma izintambo kuzixhumi ngokuya ngohlelo lokuxhuma. Itorque enconyiwe/eqinisa kakhulu ngu-0.5 / 0.6 Nm (4.42/5.31 lbf in)
5. Xhuma izintambo zikagesi kusixhumi ngokuya ngohlelo lokuxhuma. Itorque enconyiwe/eqinisa kakhulu ngu-0.5 / 0.6 Nm (4.42/5.31 lbf in)
6. VULA ukunikezwa kwamandla okukhulu.
7. Amandla (PWR) i-LED eluhlaza kufanele ivuleke. I-LED ebomvu (ERR) kufanele icishwe.

Yehlisa ngohlelo lokuhlehla. Kumamojula okukhweza/okwehliswa ukuya/kusuka kuloliwe we-DIN isikhala samahhala okungenani semojula eyodwa kufanele sishiywe kuloliwe we-DIN. Idivayisi yokunqamula izofakwa kuzintambo zenkambu.

QAPHELA: Izintambo zesiginali kufanele zifakwe ngokuhlukene namandla kanye nevolumu ephezulutagizintambo ze-e ngokuhambisana nezinga elijwayelekile lokufakwa kukagesi embonini.

Umfanekiso 5: Imvume encane

Ukucaciswa kufanele kucatshangelwe ngaphambi kokufakwa kwamamojula.

Ukulebula kwemojuli

Umfanekiso 6: Ilebula

Ilebula (sample):

Incazelo yelebula:

1. XXX-N.ZZZ – igama lomkhiqizo eliphelele.
   ◦ XXX-N - Umndeni womkhiqizo
   ◦ ZZZ – umkhiqizo
2. P/N: AAABBBCCDDDEEE – inombolo ingxenye.
   ▪ AAA - ikhodi ejwayelekile yomndeni womkhiqizo,
   ▪ BBB - igama lomkhiqizo elifushane,
   ▪ I-CCDDDD - ikhodi yokulandelana,
   • CC - unyaka wokuvulwa kwekhodi,
   • I-DDD - ikhodi yokuphuma,
   ▪ EEE - ikhodi yenguqulo (igcinelwe ukuthuthukiswa kwe-firmware ye-HW kanye/noma noma i-SW).
3. S/N: SSS-RR-YYXXXXXXXXXXXX - inombolo yomkhiqizo.
   ◦ SSS - igama lomkhiqizo elifushane,
   ◦ RR - ikhodi yomsebenzisi (inqubo yokuhlola, isb Smarteh umuntu xxx),
   ◦ YY - unyaka,
   ◦ UXXXXXXX– inombolo yesitaki yamanje.
4. D/C: WW/YY - ikhodi yedethi.
   • WW – isonto kanye
   • YY - unyaka wokukhiqiza.

Ongakukhetha

1. I-MAC
2. Izimpawu
3. WAMP
4. Okunye

IMICIMBI YOBUCHWEPHESHE

Ithebula 9: Imininingwane yobuchwepheshe

Ithebula 10: I-analogi NGAPHAKATHI/ OUT Imininingwane yobuchwepheshe

Ithebula 11: I-Digital IN/OUT Imininingwane yobuchwepheshe

IZINGXENYE EZISELE

Uku-oda izingxenye eziyisipele ezilandelayo Izinombolo Zengxenye kufanele zisetshenziswe:

IZINGUQUKO

Ithebula elilandelayo lichaza zonke izinguquko kudokhumenti.

Amadokhumenti / Izinsiza

I-SMARTEH LPC-2.VV4 Longo Isilawuli Esihlelekayo [pdf] Imaniwali yosebenzisayo LPC-2.VV4 Longo Programmable Controller, LPC-2.VV4, Longo Programmable Controller, Programmable Controller, Controller

Izithenjwa

• Imaniwali yosebenzisayo