IMANIWALI YOSEBENZISAYO
Z-LINK2-LO
I-Modbus Gateway – Umsakazo oqhelile we-IO kanye nesiphindayo ngobuchwepheshe be-Lora
I-SENECA srl
Nge-Austria, 26 - 35127 - PADOVA - ITALY
Ucingo. +39.049.8705355 - 8705359 Ifeksi. +39.049.8706287
Webindawo: www.seneca.it
Isevisi yezobuchwepheshe: supporto@seneca.it (IT), support@seneca.it (Okunye)
Ulwazi lwezentengiso: commerciale@seneca.it (IT), sales@seneca.it (Okunye)
Le dokhumenti iyindawo ye-SENECA srl. Ukuphindaphinda okungagunyaziwe nokukhiqiza kabusha (ngisho nengxenye) akuvunyelwe. Okuqukethwe kulo mbhalo kubhekisele emikhiqizweni echazwe kanye nobuchwepheshe. Naphezu komzamo oqhubekayo wokufeza ukuphelela, yonke idatha yezobuchwepheshe equkethwe kulo mbhalo ingashintshwa noma yengezwe ngezidingo zobuchwepheshe nezohwebo; akunakwenzeka ukuqeda ngokuphelele ukungezwani nokungahambisani. Kodwa-ke, okuqukethwe yile mibhalo kungaphansi kokuvuselelwa ngezikhathi ezithileview. Nganoma imuphi umbuzo, ungangabazi ukuxhumana nesakhiwo sethu noma ubhalele amakheli e-imeyili aboniswe ngenhla.
INCWADI YOMSEBENZISI – Z-LINK2-LO
| Usuku | Buyekeza | Qaphela | Umbhali | Ikhodi |
| 11/04/2023 | 1 | Uhlelo lokuqala | MM | I-MI00610-1 |
| 11/04/2023 | 1 | Kuhunyushelwe esiNgisini | MM | I-MI00610-2 |
Seneca
Z-LINK2-LO
QAPHELA!
AKUKHO MCIMBI, I-SENECA SRL NOMA ABADALIZI BAYO BAZOBA NESIBOPHO SOKULAHLEKELA IDATHA/YINGENISO YOKUBHALISA NOMA NGOKULIMAMA OKULANDELAYO NOMA OWEZENZAKALO OBUPHUMELELE UKUBUDEBEKANI NOMA UKUSETYENZISWA OKUNGEMBILE NOMA OKUNGENAMANDLA KWE-Z-LINK2-IFENE I-SOLO, I-Z-LINKXNUMX-I-SOLO, I-Z-LINKXNUMX-I-SOLO. .
I-SENECA, IZINSIZANE ZAYO, IZINHLOBO, IZINKAMPANI ZAMAQEMBU, ABADALI BAYO KANYE NABADALI BAYO ABANIKEZEKI UKUTHI IMISEBENZI IZOHLANGABEZANA NGOKUGCWELE OKULINDELEKILE NOMA UKUTHI Z-LINK2-LO, I-FIRMWARE KANYE NESOFTWARE AKUKHO IPHUTHA NOMA AKUKHO IPHUTHA FUTHI.
1. ISINGENISO
Idivayisi ye-Z-LINK2-LO yakhelwe ukudlulisa ngokusobala amaphakethe we-serial ngenethiwekhi engenantambo.
Uhlaka olwenziwe lula lwe-Z-LINK2-LO luthi:
Imbobo ye-USB ye-Z-LINK2-LO ingasetshenziswa kuphela ukuhlela i-Z-LINK2-LO kusuka ku-Windows™ PC ngesofthiwe ye-Easy Setup.
Ukuze uxhumeke namadivayisi we-Modbus RTU ungasebenzisa imbobo ye-RS232 noma i-RS485.
Umsakazo uxhuma amadivayisi amabili noma ngaphezulu e-Z-LINK2-LO.
Kusekelwa izindlela ezimbili zokusebenza: “Imodi Yebhuloho” kanye “Nemodi Ye-I/O Ekude”.
Kungenzeka futhi ukulungisa idivayisi njengesiphindaphinda isignali yomsakazo.
Isibalo sibonisa ukusetshenziswa okujwayelekile kwedivayisi ye-Z-LINK2-LO “kumodi yebhuloho” ngaphakathi kwenethiwekhi ye-ModBUS RTU:
Z-LINK2
I-MODBUSI YIZIgqila
I-MODBUSI engu-MASTER
Kule modi i-fieldbus ye-Modbus ixhunywe ngokusobala “emoyeni”.
Qaphela ukuthi i-Z-LINK2-LO kumodi “yebhuloho” ayisebenzi njenge-Modbus Master, idivayisi yangaphandle ye-Modbus Master “M” ihlale idingeka.
Isibalo sibonisa ukusetshenziswa okuvamile kwedivayisi ye-Z-LINK2-LO kumodi ye-“Remote I/O” ngaphakathi kwenethiwekhi ye-ModBUS RTU:
Z-LINK2 REMOTE I/O MASTER
Z-LINK2 REMOTE I/O SLAVE
OKUFAKAYO I-MODBUS SLAVE
OKUPHUMELAYO MODBUS SLAVE
Okokufaka kuphindaphindwa kokuphumayo. Uma okokufaka kuyidijithali kungenzeka ukuphike, uma kuyi-analogue kungenzeka ukukala amanani abo. Isimo sephutha singasetshenziselwa izidingo zokuphepha.
Qaphela ukuthi idivayisi yangaphandle ye-Modbus RTU Master ayidingeki kule modi ngoba i-Z-LINK2-LO futhi isebenza njenge-Modbus RTU Master ebhasini.
QAPHELA!
-KUPHELA I-MODBUS RTU PROTOCOL ESEKELWA
-ISITHEKU ESISODWA (RS232 NOMA RS485) ENGASETSHENZISWA NGESIKHATHI ESIFANAYO.
1.1. UMSEBENZI WOKUPHINDA
Kumodi ngayinye yangaphambilini kungenzeka ukwenza kusebenze umsebenzi wokuphinda. Uma i-Z-LINK2-LO isebenza njengesiphindaphinda, isignali yomsakazo eyamukelwe nayo idluliselwa kabusha ukuze kukhuliswe ububanzi besiginali.
1.2. INOMBOLO EYINGCWELE YE-Z-LINK2-LOS
Alikho inani eliphakeme lama-Z-LINK2-LO angasetshenziswa kunethiwekhi, kodwa i-Seneca incoma ukuthi kungafaki ama-Z-LINK30-LO angaphezu kuka-2 kunethiwekhi eyodwa.
Ukuze uthole amanethiwekhi ayinkimbinkimbi kungenzeka ukusebenzisa amanethiwekhi amabili noma ngaphezulu afanayo ngokushintsha ukhiye wenethiwekhi.
2. INDLELA YE-Z-LINK2-LO BRIDGE
I-Z-LINK2-LO ingasetshenziswa ukuxhuma amabhasi amabili noma ngaphezulu e-Modbus RTU ngaphandle kwentambo.
ExampIzingxenye zokuxhumeka kwe-point-to-multipoint ziboniswa kwizibalo ezilandelayo:
Okulula kakhulu ukuxhumana kwephuzu nephuzu: Inkosi engu-1 ye-Modbus exhunywe kusigqila esingu-1 esikude se-Modbus:
Z-LINK2
I-MODBUSI YIZIgqila
I-MODBUSI engu-MASTER
UKUXHUMANA KWENDAWO
UKUXHUMANA KOMSAKAZI
Okuyinkimbinkimbi ngokwengeziwe, kungenzeka ukuxhuma i-1 Modbus master nezigqila eziningi ze-Modbus:
Z-LINK2
I-MODBUSI YIZIgqila
I-MODBUSI engu-MASTER
UKUXHUMANA KWENDAWO
UKUXHUMANA KOMSAKAZI
Ngaphezu kwalokho, kungenzeka ukuxhuma i-1 Modbus master ngaphandle kwezigqila zendawo ze-Modbus (khomba-to-multipoint):
Z-LINK2
I-MODBUSI YIZIgqila
I-MODBUSI engu-MASTER
UKUXHUMANA KWENDAWO
UKUXHUMANA KOMSAKAZI
Kungenzeka futhi ukuxhuma Izigqila ze-Modbus ebhasini elikhulu le-Modbus lendawo:
Z-LINK2
I-MODBUSI YIZIgqila
I-MODBUSI engu-MASTER
UKUXHUMANA KWENDAWO
UKUXHUMANA KOMSAKAZI
Uma i-Z-LINK2-LO ingafinyeleleki kalula, kungenzeka ukulungisa eyodwa “njengesiphindaphindayo”, qaphela ukuthi amadivayisi e-Modbus RTU Slave nawo angaxhunywa kusiphindaphinda:
- Z-LINK2
- I-MODBUSI YIZIgqila
- I-MODBUSI engu-MASTER
- UKUXHUMANA KWENDAWO
- UKUXHUMANA KOMSAKAZI
- OPHINDAYO
UKUSETHA Z-LINK2-LO NJENGEMODI “YEBHHOLOHO”
Ukuze ulungiselele idivayisi, sebenzisa isofthiwe ye-Easy Setup engalandwa ku-Seneca webisayithi esigabeni Z-LINK2-LO.
QAPHELA!
Ngaphambi kokuqala noma yikuphi ukusebenza kokumisa kuyadingeka UKUCISHA idivayisi ye-Master Radio
Ukuze wenze uhlelo udinga:
1) Vala i-Modbus master
2) Setha ama-dip switch ku-Z-LINK2-LO kumodi yokuhlela futhi unike amandla idivayisi:
3) xhuma ikhebula le-USB ku-PC
I-Z-LINK2-LO exhunywe ku-Master ibizwa ngokuthi “I-Bridge Master”, kanti amanye ama-Z-LINK2-LO (axhunywe ezigqileni) abizwa ngokuthi “Izigqila Zebhuloho”.
QAPHELA!
IINCWADI YOMSEBENZISI – Z-LINK2-LO EYODWA KUPHELA I-Z-LINK2-LO INGAQINISWA NJENGE-“BRIDGE MASTER”, BONKE ABANYE KUFANELE BAQINISWE NJENGOBA “IZIgqila zebhuloho”.
4) Manje njengoba ukucushwa kwebhasi lendawo sekuqediwe, sidinga ukumisa umsakazo:
Kungenzeka ukukhetha uma idivayisi iwuhlobo oluphindayo, ukhiye wenethiwekhi futhi uma amaphakethe omsakazo ebethelwe.
Wonke ama-Z-LINK2-LO kunethiwekhi efanayo kufanele abe nokhiye wenethiwekhi ofanayo. Uma ufuna ukudala, isiboneloample, 3 amanethiwekhi parallel, udinga ukudala 3 okhiye benethiwekhi abahlukene.
Ayikho inombolo enkulu yamanethiwekhi ahambisanayo, kodwa ukuze uthole ukusebenza okwamukelekayo, inani lamanethiwekhi angu-8 akufanele lidlule.
QAPHELA!
Ama-Z-LINK2-LO AMABILI ANOKHIYE WENETWEKI ABAHLUKE AKAKWAZI UKUFAKA ENETHIWEKHI OFANAYO NGENXA yokuthi AYIBONAKALI KANYE.
5) Uma ukucupha sekuthunyelwe ku-Z-LINK2-LO, vala i-Z-LINK2-LO bese usetha amaswishi e-dip:
Okwe-Z-LINK2-LO “Bridge Master”:
Okwe-Z-LINK2-LO “Bridge Slave”:
6) Manje usungakwazi ukuxhuma amadivayisi we-Modbus ngembobo ye-Rs485 noma i-Rs232.
Imbobo ye-RS485 itholakala ngesikulufu setheminali engu-7-8-9 noma ngesixhumi sebhasi se-IDC10.
Imbobo ye-RS232 itholakala ngesikulufu setheminali esingu-4-5-6.
3. Z-LINK2-LO “REMOTE I/O MODE”
I-Z-LINK2-LO ingasetshenziselwa ukukopisha okokufaka kokuphumayo okukude, ngokwesiboneloampkungenzeka ukuthi uguqule izinkomba ze-alamu noma udlulise kabusha isilinganiso se-analogue ngaphandle kokuxhuma izintambo:
Kusetshenziswa amamojula wesigqila se-Seneca I/O Modbus RTU, lesi siph esingenhlaample ingazuzwa nge:
NR1 Seneca Z-4DI-2AI-2DO Ikheli lesiteshi 1
Ikheli le-NR1 Z-DOUT Station 2
Ikheli le-NR1 Z-3AO Station 3
Ama-NR2 Z-LINK2-LOs kumodi yesilawuli kude se-I/O
- I-SENECA Z-4DI-2AI-2DO
- I-SENECA Z-LINK2 “REMOTE I/O”
I-MODBUSI engu-MASTER - RS485 MODBUS RTU IBHASI
- I-SENECA Z-LINK2 “REMOTE I/O”
SIGQILA - I-SENECA ZD-OUT
- I-SENECA Z-3AO
Okokufaka kwedijithali kunganakwa ngaphambi kokudluliselwa kabusha kuyilapho izilinganiso ze-analogue zingakalwa ngaphambi kokudluliselwa kabusha.
Inombolo enkulu yokokufaka kwedijithali okusekelwayo ngu-20.
Inombolo ephezulu yokokufaka/okuphumayo kwe-analogue okusekelwe ngu-50.
Ohlangothini lokukhiphayo isimo sephutha singacushwa: uma kukhona iphutha kokokufaka, okuphumayo kungashintshelwa esimweni sokuphepha esihleliwe.
QAPHELA!
Ukuze usebenzise isimo sephutha lokukhiphayo, kuhle kakhulu ukuxhuma okokufaka kokuthi “I-Remote I/O Master” kanye nemiphumela “ku-Remote I/O Slave”.
3.1. UKUSETHA I-Z-LINK2-LO NJENGEMODI YE-"REMOTE I/O"
Ukuze ulungiselele idivayisi, sebenzisa isofthiwe ye-Easy Setup engalandwa ku-Seneca webisayithi esigabeni Z-LINK2-LO.
QAPHELA!
Ngaphambi kokuqala noma yikuphi ukusebenza kokumisa kuyadingeka UKUCISHA idivayisi ye-Master Radio
Ukuze wenze uhlelo udinga:
1) Vala noma iyiphi i-Z-LINK2-LO elungiselelwe njenge-Modbus Master
2) Setha ama-dip switch ku-Z-LINK2-LO kumodi yokuhlela futhi unike amandla idivayisi:
3) xhuma ikhebula le-USB ku-PC
I-Z-LINK2-LO ezosebenza njenge-Master ibizwa ngokuthi “Remote I/O Modbus Master”, kanti amanye ama-ZLINK2-LO (axhunywe ezigqileni) abizwa ngokuthi “I-Remote I/O Modbus Slaves”.
QAPHELA!
I-Z-LINK2-LO EYODWA KUPHELA ENGAQINISWA NJENGE-“REMOTE I/O Master”, BONKE ABANYE KUMELE BAQINISWE NJENGAMA-“REMOTE I/O Slaves”.
3.1.1. UKUSETHA I-Z-LINK2-LO NJENGETHI “REMOTE I/O MODBUS MASTER”.
1) Esigabeni sokumisa ibhasi le-Modbus, khetha izinga le-baud le-Modbus Master kanye nemodi yokusebenza:
I-Z-LINK2-LO esebenza njenge-Modbus Master ibizwa ngokuthi “Remote I/O Modbus Master”.
QAPHELA!
I-Z-LINK2-LO EYODWA KUPHELA ENGAQINISWA NJENGE-“MODBUS MASTER”, BONKE ABANYE KUMELE BAQINISWE NJENGAMA-“MODBUS Slaves”.
2) Manje njengoba ukucushwa kwebhasi lendawo sekuqediwe, sidinga ukumisa umsakazo:
Kungenzeka ukukhetha uma idivayisi iwuhlobo oluphindayo, ukhiye wenethiwekhi futhi uma amaphakethe omsakazo ebethelwe.
Wonke ama-Z-LINK2-LO kunethiwekhi efanayo kufanele abe nokhiye wenethiwekhi ofanayo. Uma ufuna ukudala, isiboneloample, 3 amanethiwekhi parallel, udinga ukudala 3 okhiye benethiwekhi abahlukene.
Ayikho inombolo enkulu yamanethiwekhi ahambisanayo, kodwa ukuze uthole ukusebenza okwamukelekayo, inani lamanethiwekhi angu-8 akufanele lidlule.
QAPHELA!
I-Z-LINK2-LO EZIMBILI ONAKHIYE ABAHLULEKILE BENETHOKHI AYIKWAZI UKUFAKA ENENETHWENI EFANAYO NGOBA AYIBONAKALI KANYE.
3) Manje sidinga ukumisa imingcele ye-Modbus Master:
Isikhathi Sokuphela Kwempendulo isikhathi inkosi elinda ngayo ukumemezela ukuphela kwesikhathi sokuxhumana (isigqila asizange siphendule)
Ukubambezeleka Phakathi Kwezicelo ikhefu eliphakathi kombuzo owodwa osuka kunkosi nolandelayo
Izama futhi ukuqalisa Yehlulekile inombolo yemizamo yokuxhumana ngaphambi kokumemezela ukwehluleka.
4) Manje ake silungiselele okokufaka kwedijithali okumele kudluliselwe kabusha kokuphumayo kwedijithali:
Cindezela okuthi “Engeza okusha” bese ukhetha kusizindalwazi se-Seneca okokufaka kwedijithali okufanele kudluliselwe kabusha kokuphumayo:
Bese ukhetha okukhiphayo kwedijithali okudlulisela kabusha okokufaka kwedijithali:
Manje khetha ukuthi uyafuna yini ukucutshungulwa kwesiginali yedijithali nokuthi inani lokuphumayo liyoba yini uma okokufaka kwedijithali kwehluleka:
Ngemva kokusetha okuphelele, uzobona okufana nalokhu:
5) Manje ake silungiselele okokufaka kwe-analogue okumele kudluliselwe kabusha kokuphumayo kwe-analogue:
Cindezela okuthi “Engeza okusha” bese ukhetha kusizindalwazi se-Seneca okokufaka kwedijithali okufanele kudluliselwe kabusha kokuphumayo:
Bese ukhetha okukhiphayo kwe-analogue okuthumela kabusha okokufaka kwe-analogue:
Manje khetha ukuthi uyafuna yini ukucutshungulwa kwesiginali ye-analogue nokuthi inani lokuphumayo liyoba yini uma okokufaka kwedijithali kwehluleka:
Ngakho-ke uma ufuna ukukala okokufaka kuka-4000-20000uA emkhiqizweni ongu-0-10000mV ungafaka:
Isiqalo Sokufunda Esilinganisa Okokufaka = 4000 uA
Okokufaka Kokufunda Kwesikali Esigcwele = 20000 uA
I-Scale Start Output Writing = 0 mV
Ukukhipha Isikali Esigcwele Sokubhala = 10000 mV
Ngemva kokusetha okuphelele, uzobona okufana nalokhu:
6) Uma ukulungiselelwa sekuthunyelwe ku-Z-LINK2-LO, vala idivayisi bese usetha amaswishi e-dip:
Ku-Z-LINK2-LO “Remote Master I/O”:
7) Manje usungakwazi ukuxhuma amadivayisi we-Modbus ngembobo ye-Rs485 noma i-Rs232.
Imbobo ye-RS485 itholakala ngesikulufu setheminali engu-7-8-9 noma ngesixhumi sebhasi se-IDC10.
Imbobo ye-RS232 itholakala ngesikulufu setheminali esingu-4-5-6.
QAPHELA!
-Ebhasini le-RS485 kungenzeka ukuxhuma inombolo enkulu yamadivayisi okuncike kumkhiqizi (imvamisa engu-32).
-Idivayisi engu-1 kuphela engaxhunywa echwebeni elilodwa le-RS232
3.1.2. UKUSETHA I-Z-LINK2-LO NJENGETHI “REMOTE I/O MODBUS SLAVE”.
1) Esigabeni sokucushwa kwebhasi le-Modbus, khetha izinga le-baud yebhasi kanye nemodi yokusebenza:
I-Z-LINK2-LO esebenza njenge-Modbus Slave ibizwa ngokuthi “Remote I/O Modbus Slave”.
QAPHELA!
I-Z-LINK2-LO EYODWA KUPHELA ENGAQINISWA NJENGE-“REMOTE I/O Master”, BONKE ABANYE KUMELE BAQINISWE NJENGAMA-“REMOTE I/O Slaves”.
2) Manje njengoba ukucushwa kwebhasi lendawo sekuqediwe, sidinga ukumisa umsakazo:
Kungenzeka ukukhetha uma idivayisi iwuhlobo oluphindayo, ukhiye wenethiwekhi futhi uma amaphakethe omsakazo ebethelwe.
Wonke ama-Z-LINK2-LO kunethiwekhi efanayo kufanele abe nokhiye wenethiwekhi ofanayo. Uma ufuna ukudala, isiboneloample, 3 amanethiwekhi parallel, udinga ukudala 3 okhiye benethiwekhi abahlukene.
Ayikho inombolo enkulu yamanethiwekhi ahambisanayo, kodwa ukuze uthole ukusebenza okwamukelekayo, inani lamanethiwekhi angu-8 akufanele lidlule.
QAPHELA!
Ama-Z-LINK2-LO AMABILI ANOKHIYE WENETWEKI ABAHLUKE AKAKWAZI UKUFAKA ENETHIWEKHI OFANAYO NGENXA yokuthi AYIBONAKALI KANYE.
3) Uma ukucupha sekuthunyelwe ku-Z-LINK2-LO, vala i-Z-LINK2-LO bese usetha amaswishi e-dip:
Okwe-Z-LINK2-LO “Remote I/O Slave”:
4) Manje usungakwazi ukuxhuma amadivayisi we-Modbus ngembobo ye-Rs485 noma i-Rs232.
Imbobo ye-RS485 itholakala ngesikulufu setheminali engu-7-8-9 noma ngesixhumi sebhasi se-IDC10.
Imbobo ye-RS232 itholakala ngesikulufu setheminali esingu-4-5-6
QAPHELA!
-Ebhasini le-RS485 kungenzeka ukuxhuma inombolo enkulu yamadivayisi okuncike kumkhiqizi (imvamisa engu-32).
-Idivayisi engu-1 kuphela engaxhunywa echwebeni elilodwa le-RS232
5) Manje hlela wonke amanye ama-Z-LINK2-LO njenge-“Remote I/O Slaves”.
4. I-MODBUS RTU PROTOCOL
Iphrothokholi esekelwayo yazo zombili izimbobo ze-RS232 noma i-RS485 i-Modbus RTU; ukuze uthole ulwazi olwengeziwe ngale phrothokholi, bheka ukucaciswa kwe-Modbus webindawo:
http://www.modbus.org/specs.php
5. UKUBUYEKEZWA KWE-FIRMWARE
Ngesibuyekezo esisha se-Easy Setup, i-Seneca ingafaka i-firmware yedivayisi entsha.
Isibuyekezo esisha se-firmware singase sifake izici ezintsha noma ukulungiswa kweziphazamisi.
QAPHELA!
Uma isibuyekezo se-firmware sesiqalile, ungaluvali ucingo kuze kuqedwe inqubo.
Vula idivayisi ye-Z-LINK2-LO bese uyixhuma ku-PC usebenzisa imbobo ye-USB.
Kumenyu yokucushwa chofoza "Isibuyekezo Sesoftware":
Ngokucindezela “Layisha isofthiwe kusuka file” inkinobho, isofthiwe izovula uhla lwemibhalo lwe-firmware.
Uma ukubuyekezwa "kwesofthiwe entsha" kusanda kakhulu kunalokho "kwesofthiwe kudivayisi", chofoza okuthi "Thumela isofthiwe kudivayisi".
Isibuyekezo se-firmware sithatha cishe iminithi elingu-1.
6. IZIHLOKO ZOKUSEBENZA NGAMALED
Idivayisi inama-LED angu-3:
I-L1 ithatha igama le-RF-RX/BUS
I-L2 ithatha igama le-RF-TX
I-L4 ithatha igama le-RUN
6.1. UKUSEBENZA KWAMA-LED NGOKWENDLELA YOKUSEBENZA
6.1.1.BRIDGE MODBUS MASTER / REMOTE I/O MODBUS MASTER
Kule modi, idivayisi kufanele idlulisele iphrothokholi ye-Modbus RTU kokubili ebhasini le-RS485/RS232 nangomsakazo. Ngemuva kwalokho i-RF-RX/BUS eholwa izokhanyisa kuqala ilandelwe yi-RF-TX eholwa.
6.1.2. ISIgqila se-BRIDGE MODBUS / REMOTE I/O MODBUS SLAVE
Kule modi, idivayisi ithola iphrothokholi ye-Modbus RTU emsakazweni futhi iyithumele ebhasini i-RS485/RS232. Khona-ke i-RF-RX/BUS eholwayo izokhanya, uma isigqila esiphenywa ngemibuzo sixhunywe ebhasini khona-ke i-RF-TX lead nayo izokhanya.
Uma i-node icushwa njenge-Repeater, i-RF-TX LED izokhanya ngisho noma singekho isigqila eBHASINI, lokhu ngenxa yokuthi iphakethe lomsakazo elitholiwe lihlala liqalwa kabusha.
7. UKUXOXA IZINKINGA
|
INKINGA |
ISIXAZULULO |
| Ohlangothini lwe-Master, ama-LED L1 kanye ne-L2 flash, kodwa awekho ama-LED akhanyayo ohlangothini lwe-Slave. | -Uhlangothi lwezigqila lwe-Z-LINK2-LO lungaphandle kwebanga lomsakazo, faka i-Z-LINK2-LO Slave eduze ne-Z-LINK2-LO Master.
Faka i-Z-LINK2-LO kumodi yokuphinda phakathi nendawo. Faka esikhundleni sezimpondo ezihlinzekiwe ufake izimpondo zangaphandle (ukuthola ulwazi olwengeziwe, bheka www.seneca.it esigabeni Z-LINK2-LO). -Bheka ukucushwa okulungile kwamaswishi ediphu |
| Imodi yebhuloho: Ohlangothini lwe-Master, ama-LED L1 kanye ne-L2 awabani. | I-Modbus Master ayithumeli amaphakethe ngembobo ye-RS232 noma i-RS485:
-Vula idivayisi yangaphandle ye-Modbus Master |
| Ohlangothini oluyinhloko, i-led L1 ne-L2 flash futhi nasohlangothini lwesigqila kodwa kuhlale kukhona amaphutha okuxhumana | -Uhlangothi lwezigqila lwe-Z-LINK2-LO lungaphandle kwebanga lomsakazo, faka i-Z-LINK2-LO Slave eduze ne-Z-LINK2-LO Master.
Faka i-Z-LINK2-LO kumodi yokuphinda phakathi nendawo. Faka esikhundleni sezimpondo ezihlinzekiwe ufake izimpondo zangaphandle (ukuthola ulwazi olwengeziwe, bheka www.seneca.it esigabeni Z-LINK2-LO). |
| Imodi ye-I/O yesilawuli kude: Ngidinga okokufaka kwedijithali okungaphezu kuka-20 ukuze ngiphinde emiphumeleni engaphezu kuka-20 | Dala amanethiwekhi ahambisanayo angu-2 noma ngaphezulu ngokushintsha okhiye benethiwekhi be-Z-LINK2-LO |
Amadokhumenti / Izinsiza
 |
I-SENECA Z-LINK2-LO Modbus Gateway Remote IO Radio kanye nesiphindayo [pdf] Imaniwali yosebenzisayo I-Z-LINK2-LO Modbus Gateway Remote IO Radio and Repeater, Z-LINK2-LO, Modbus Gateway Remote IO Radio and Repeater, Remote IO Radio and Repeater, Radio and Repeater |
 |
I-SENECA Z-LINK2-LO Modbus Gateway Remote IO Radio Nesiphindaphinda [pdf] Imaniwali yosebenzisayo Z-LINK2-LO Modbus Gateway Remote IO Radio And Repeater, Z-LINK2-LO, Modbus Gateway Remote IO Radio and Repeater, Gateway Remote IO Umsakazo kanye Repeater, Remote IO Umsakazo kanye Repeater, Umsakazo kanye Repeater |
