Iphothali Yedatha ye-T-DP0301-B nesibonisi esikude esinomphumela ongu-4-20 mA kanye nesixhumi esibonakalayo se-serial
Incwadi Yeziqondiso
Iphothali Yedatha ye-T-DP0301-B nesibonisi esikude esinomphumela ongu-4-20 mA kanye nesixhumi esibonakalayo se-serial
Iphothali Yedatha Nesibonisi Esikude esino-4-20 mA Output kanye ne-Serial Interface
Inguqulo ye-MODEL T-DP0301-A RS-232
ULWAZI OMSEBENZI OLUBALULEKILE
USUKU LOKUFAKWA NGALO: ___________________________________
INOMBOLO YEYUNITHI:________________________________
INKAMPANI: _____________________________________________
BONISA AMAUNITHI OKUKHALA (isb. amayintshi, amagalani): ____________________
I-MINIMUM TANK READOUT: ____________________________________
I-MAXIMUM TANK READOUT: ____________________________________________________
ISIKALI ESIGCWELE I-ANALOGU YOKUKHALISA: ____________________________________
INOMBOLO YOMKHIQIZO : __________________________________________
Amanothi: ____________________________________
ISAHLUKO 1 – ISINGENISO
Siyakuhalalisela ngokuthenga i-Garnet Instruments SEELEVEL AccessTM Data Portal. I-SEELEVEL Access TM incoma i-SEELEVEL Annihilator TM 806-B, 806-Bi, noma i-SEELEVEL SpecialTM 808-P2 kanye namageji e-SeeLeveL ProSeries II 810-PS2 ngokunikeza ukufundwa kwevolumu eyengeziwe kukhebhu yeloli lakho.
Ngaphezu kokunikeza ukufundwa kwezinga lethangi, i-SEELEVEL Access TM inikeza ukukhishwa kwe-analog ye-4-20 mA ngokulingana nomthamo we-fluid obonisiwe. Lokhu okukhiphayo kwe-analogi kungasetshenziswa ukuxhumana nezinga lethangi kwezinye izingcezu zemishini efana nezinhlelo zokuphatha imikhumbi noma Amadivayisi Wokungena Nge-elekthronikhi (ELD).
Inani eliphelele lesikali sokukhiphayo kwe-analogi lingasethwa kusetshenziswa izinkinobho ezingemuva kwesibonisi, azikho izinto zokusebenza ezengeziwe ezidingekayo ukuze kulinganiswe.
I-SEELEVEL Access TM iqukethe ne-serial RS-232 interface evumela ukuphathwa kwemikhumbi noma izinhlelo ze-ELD ukuqoqa idatha yevolumu yamanzi kusuka ku-gauge. I-interface iyi-duplex egcwele futhi iqukethe izici zokuphepha zokuvimbela ukufinyelela okungagunyaziwe.
Isibonisi se-SEELEVEL AccessTM senzelwe ukumelana nokudlidliza kanye nokushaqeka okuhlangatshezwana nakho ezinhlelweni zeselula. Ngenkathi i-808-P2 ne-810-PS2 isebenza kumabhethri angaphakathi, (amandla weloli we-12 volt asetshenziselwa ukusebenzisa ukukhanya kwangemuva nama-alamu angaphandle), isibonisi se-SEELEVEL Access sisebenza ngamandla weloli we-12V.
Isibonisi Esikude Nephothali Yedatha eno-4-20 mA Output kanye ne-RS-232 Serial Interface
ISAHLUKO 2 – IZICI
I-SEELEVEL AccessTM yakhelwe ngokukhethekile izinhlelo zokusebenza ezithile kanye nezici ezithile:
Izici zokufinyelela ezijwayelekile ze-SEELEVEL
- Isignali phakathi kwesibonisi se-806-B, 806-Bi, 808-P2 noma 810-PS2 kanye ne-SEELEVEL Access TM ifakwe ikhodi yedijithali ukuze umugqa wesiginali uxhumeke kusetshenziswa ipulaki ye-trailer yephinikhodi engu-7 evamile.
- Isibonisi sisebenza ngamandla weloli angu-12 volt, futhi sidonsa ngaphansi kuka-150 mA.
- Idizayini yedijithali yonke (ngaphandle kokuphumayo kwe-4-20 mA) iqeda ukukhukhuleka kokufunda noma ukuwohloka, iqinisekisa ukunemba kwesikhathi eside ngaphansi kwazo zonke izimo zokusebenza.
- Ukusebenza kusuka -40 °C kuya +60 °C (-40 °F kuya +140 °F) izinga lokushisa le-ambient.
- Ukufakwa kalula nokusevisa ngewaranti enomkhawulo yonyaka owodwa.
Izici ezengeziwe ze-SEELEVEL zokufinyelela ku-T-DP0301-A - I-analog engu-4-20 mA okukhiphayo, no-4 mA ehambisana nevolumu enguziro ebonisiwe, kanye no-20 mA ohambisana nevolumu egcwele ebonisiwe ehlelwe kusibonisi esikude.
- Isixhumi esibonakalayo se-RS-232 esitholakalayo ukuze sixhume ezinhlobonhlobo ze-ELD noma amasistimu okuphatha izimoto.
- I-SEELEVEL AccessTM ihlinzeka ngesibonisi se-LED esifundeka kalula ngaphakathi kokuhlangene, onqenqemeni-view indawo ebiyelwe, elungiselelwe ukukhwezwa kwe-top-of-dash noma ngaphezulu kwekhonsoli. Isibonisi sifakwe endaweni ebiyelwe nge-aluminium engu-2.7″ ububanzi x 1.1″ ukuphakama x 3.4″ ukujula (68 mm ububanzi x 29 mm ukuphakama x 87 mm. ukujula).
- Iswishi yenkinobho ye-dimmer yenza isisebenzisi sikwazi ukulawula ukukhanya.
- Ukufakwa kukagesi kwezintambo ezi-6 okulula - amandla angu-12V (obomvu), aphansi (amnyama), isignali yegeji (ephuzi), okukhiphayo kwe-analog (okumhlophe/okuluhlaza okwesibhakabhaka), ukwamukela okuwuchungechunge (okunsomi) kanye ne-serial transmit (grey).
ISAHLUKO 3 – IZINKOMBOLO ZOKUFAKA IZINKONZO
I-SEELEVEL Access TM iklanyelwe ukufakwa kalula nge-806-B, 806-Bi, 808-P2 noma 810-PS2 uchungechunge lwegeji ye-SEELEVEL TM. Imiyalo yokufaka iyatholakala ku-inthanethi ku- www.garnetinstruments.com.
I-SEELEVEL AccessTM Remote Display kulula ukuyifaka:
808-P2 Wiring Umdwebo
810-PS2 Umdwebo Wezintambo
806-B Umdwebo Wezintambo
806-Bi Wiring Umdwebo
ISAHLUKO 4 – BONISA UHLELO
Isibonisi se-SEELEVEL Access TM sibonisa izinga lethangi ngokuphinda ulwazi oluboniswe ku-806-B, 806-Bi, 808-P2 noma i-810-PS2 gauge. I-4-20 mA okukhiphayo kwe-analog ibalwa kusukela kuzinga lokubonisa ngokuphuma kwe-4 mA okuhambisana nezinga lokubonisa lika-zero, kanye nokuphumayo okungu-20 mA okuhambisana nezinga lesikali esigcwele esihlelwe kusibonisi se-SEELEVEL AccessTM.
Okwesiboneloample, uma isikali esigcwele sihlelwe ukuthi sibe ngu-500.0, khona-ke inani lokubonisa elingu-400.0 lizoholela ekukhishweni kwe-analog okungu-16.80 mA. Isibonisi sizobona indawo yedesimali futhi silungise okukhiphayo ngokufanele, ngakho kulesi example ivelu yokubonisa engu-400 izophinda iphumele ekukhishweni kwe-analog okungu-16.80 mA.
Ukusetha ileveli yesikali esigcwele:
- Nquma umthamo omkhulu wevolumu ongaboniswa bese ukhetha inani eliphelele lesikali elilingana noma likhulu kunale volumu.
- Cindezela kokubili izinkinobho OKULANDELAYO kanye ne-UP/ENTER kuphaneli engemuva, isibonisi sizobonisa i-ACAL. Dedela izinkinobho zombili.
- Isibonisi sizobonisa ukulinganiswa okukhona ngokugqama kwedijithi engakwesokunxele. Cindezela inkinobho ethi PHEZULU/ENTER ukuze ushintshe idijithi ekhanyayo. Cindezela inkinobho OKULANDELAYO ukuze uye edijithini elandelayo.
- Setha wonke amadijithi angu-4, bese ucindezela i-NEXT MENU futhi ukuze usethe iphoyinti ledesimali, izokhanya ukukhombisa ukuthi ikhethiwe. Cindezela inkinobho ethi UP/ENTER ukuze ukhethe okuthi x.xxx, xx.xx, xxx.x noma akukho desimali. Ukuze uthole ukunemba okungcono kakhulu kokuphumayo kwe-analog, zama ukusebenzisa wonke amadijithi angu-4 afana no-500.0 esikhundleni sika-500 nje.
- Ngemva kokuba idesimali isimisiwe, cindezela OKULANDELAYO IMENU futhi, isibonisi sizobonisa i-Stor. Cindezela okuthi UP/ENTER ukuze ugcine ukulinganisa bese uphuma kumenyu yokusetha. Isibonisi sizoqhubeka nokubonisa i-Stor isikhashana bese sizobonisa kwenziwe umzuzwana. Bese umsebenzi ojwayelekile uyaqala futhi.
- Uma ungafuni ukugcina ukulinganisa, cindezela OKULANDELAYO futhi futhi isibonisi sizobonisa Abrt. Cindezela okuthi UP/ENTER ukuze uchithe ephuma kumenyu yokulinganisa ngaphandle kokulondoloza.
- Uma ucindezela OKULANDELAYO futhi kusibonisi se-Abrt, imenyu izobuyela ekuqaleni ngedijithi engakwesokunxele ekhethwe ngokugqama.
- Uma ukulinganiswa kwesikali esigcwele kungaphansi kuka-103, isibonisi ngeke sikwazi ukubala ukulinganisa okuvumelekile, futhi sizobonisa i-cErr (iphutha lokulinganisa) ngemva kwemizuzwana embalwa. Ukulinganisa okukhona kuzogcinwa, futhi isibonisi sizobuyela ekusebenzeni okuvamile.
Kuya view ukulinganisa okukhona:
- Cindezela inkinobho ethi IMENU OKULANDELAYO noma UP/ENTER (kodwa hhayi kokubili) kuphaneli yangemuva, isibonisi sizobonisa ukulinganisa okukhona kwesikali se-analogi esigcwele kuyilapho inkinobho ibanjelwe phansi. Dedela inkinobho ukuze ubuyele ekusebenzeni okuvamile.
Ukuhlola okukhiphayo kwe-analog:
- Nakuba inkinobho OKULANDELAYO noma UP/ENTER kuphaneli engemuva icindezelwe, isibonisi sizobonisa ukulinganiswa kwesikali esigcwele futhi okukhiphayo kwe-analogi kuzokuya esikalini esigcwele (20 mA). Lokhu kungasetshenziselwa ukuhlola noma ukulinganisa okokusebenza okuxhunywe kokuphumayo kwe-analog.
- Ngenkathi isibonisi sikumodi yokulinganisa (efakwe ngokucindezela izinkinobho OKULANDELAYO kanye ne-UP/ENTER) ukuphuma kwe-analog kuzoba ku-4mA.
ISAHLUKO SESI-5 – INTERFACE Eyisithasiselo
Ifomethi yephothali ye-SeeLeveL ELD kanye nefomethi yesignali
- Ifomethi yesiginali esekelwayo yi-bidirectional serial (imigqa ehlukene ye-TX ne-RX), i-RS232 voltagamazinga e, 9600 baud, 8 bit, akukho ukulingana, 1 stop bit.
- Yonke imilayezo ilalela le fomethi elandelayo: [qalisa ukulandelana] [inani eliphelele lamabhayithi emlayezweni] [i-ID yomlayezo] [umthwalo wokukhokha – ozikhethela] [CRC] [ukumisa ukulandelana]
- Wonke amapharamitha wamabhayithi amaningi adluliselwa ku-big-endian (MSB kuqala)
- Qala uchungechunge: [0xFE][0xFE][0x24] · Isamba senani lamabhayithi kumlayezo (ibhayithi elingu-1)
- I-ID yomlayezo (ibhayithi elingu-1)
- Ukukhokha (kuyakhetheka kuye ngomlayezo)
- I-CRC (ibhayithi elingu-1) = isamba esiqondile sawo wonke amabhayithi andulele, ancishisiwe abe yibhayithi elingu-1
- Misa ukulandelana: [0xFF][0xFF][0x2A]
Umlayezo Wombuzo we-SeeLeveL (ELD -> SeeLeveL)
- Inani: 0x00
- Ivumela i-ELD ukuthi ibuze idivayisi ye-SeeLeveL
- [0xFE][0xFE][0x24][0x09][0x00][0x29][0xFF][0xFF][0x2A]
SeeLeveL Query Response (SeeLeveL -> ELD)
- Inani: 0x01
- I-SeeLeveL iphendula nge-ID yemodeli (ibhayithi elingu-1), i-H/W Rev (ibhayithi elingu-1), i-S/W Rev (amabhayithi angu-2), amandla e-alamu (ibhayithi elingu-1), nosekelo lwe-SN (ibhayithi elingu-1). Uma idivayisi ye-SeeLeveL isekela inombolo ye-serial ehlukile, izolandela (amabhayithi angu-8 ubude).
- Example: i-ID yemodeli ye-SeeLeveL = 0x01, i-hardware rev = `E' (0x45), i-software enkulu rev = 0x05, i-rev encane = 0x09, akukho khono le-alamu = 0x00 (0x01 = i-alamu iyakwazi), inombolo ye-serial iyasekelwa = 0x01 (inombolo yomkhiqizo ayitholakali isekelwe = 0x00), kanye nenombolo ye-serial = 0x0102030405060708:
- [0xFE][0xFE][0x24][0x17][0x01][0x01][0x45][0x05][0x09][0x00][0x01] [0x01][0x02][0x03][0x04][0x05][0x06][0x07][0x08][0xB1][0xFF][0xFF] [0x2A]
SeeLeveL Handshake Demand Message (SeeLeveL -> ELD)
- Inani: 0x02, 1 byte payload
- I-ELD kufanele iphendule ngempendulo efanele enekhodi ukuze iqale noma iqhubeke nokudluliswa noma ukusakazwa kwamazinga oketshezi kusuka kudivayisi ye-SeeLeveL. Izimfuno zokuxhawula zizosakazwa ngezikhathi ezithile.
- Example: · [0xFE][0xFE][0x24][0x0A][0x02][0x3E][0x6A][0xFF][0xFF][0x2A]
I-ELD Handshake Response (ELD -> SeeLeveL)
- Inani: 0x03, 1 byte payload
- Ukuze ubale impendulo, umthwalo okhokhelwayo ovela ku-SeeLeveL Handshake Demand Message usetshenziswa njengekheli/offset ukulanda okuqukethwe kwethebula lokubheka:
- Impendulo ku-exampngenhla:
- [0xFE][0xFE][0x24][0x0A][0x03][0x85][0xB2][0xFF][0xFF][0x2A]
- Xhumana nezinsimbi ze-Garnet ku-1-800-617-7384 noma ku info@garnetinstruments.com ukumisa ubudlelwano bokusebenza obufanelekile. Uma lokhu sekuqinisekisiwe, ithebula lempendulo yokuxhawula lizonikezwa.
Thumela Umlayezo Wezinga Le-Liquid (ELD -> SeeLeveL)
- Inani: 0x04, akukho ukukhokhelwa
- I-SeeLeveL iphendula ngeleveli eyodwa yoketshezi noma umlayezo wokudinga ukuxhawula izandla.
- [0xFE][0xFE][0x24][0x09][0x04][0x2D][0xFF][0xFF][0x2A]
Qala Umlayezo Wokusakaza Wezinga Le-Liquid (ELD -> SeeLeveL)
- Inani: 0x05, akukho ukukhokhelwa
- I-SeeLeveL iphendula ngezinga eliwuketshezi noma ngomlayezo wokudinga ukuxhawulana.
- [0xFE][0xFE][0x24][0x09][0x05][0x2E][0xFF][0xFF][0x2A]
Misa Umlayezo Wokusakaza Wezinga Le-Liquid (ELD -> SeeLeveL)
- Inani: 0x06, akukho ukukhokhelwa
- I-SeeLeveL izokhansela noma yikuphi ukusakazwa okwengeziwe kwezinga loketshezi.
- [0xFE][0xFE][0x24][0x09][0x06][0x2F][0xFF][0xFF][0x2A]
I-SeeLeveL Query Alarm Liquid Level Message (ELD -> SeeLeveL)
- Inani: 0x07, akukho ukukhokhelwa
- I-SeeLeveL izophendula ngempendulo yezinga le-alamu eliwuketshezi noma impendulo yephutha uma umsebenzi we-alamu ungasekelwe.
- [0xFE][0xFE][0x24][0x09][0x07][0x30][0xFF][0xFF][0x2A]
SeeLeveL Liquid Alarm Level Response (SeeLeveL -> ELD)
- Inani: 0x08, 7 byte payload
- I-SeeLeveL iphendula ngezinga le-alamu yoketshezi (amabhayithi angu-4 = i-int32 engasayiniwe), inombolo yamadijithi kwesokudla sedesimali (ibhayithi elingu-1), uhlobo lwe-alamu (ibhayithi elingu-1; eliphezulu = 0x01, eliphansi = 0x00), nokuthi ingabe izinga loketshezi likhona yini okwamanje. i-alamu (1 byte; i-alamu iyasebenza = 0x01, ayikho i-alamu = 0x00).
- Example: izinga le-alamu eliwuketshezi = 347.56, uhlobo lwe-alamu = izinga eliphansi, i-alamu iyasebenza:
- [0xFE][0xFE][0x24][0x10][0x08][0x00][0x00][0x87][0xC4][0x02][0x00] [0x01][0x86][0xFF][0xFF][0x2A]
Umlayezo Wesimo Se-alamu Ye-SeeLeveL (ELD -> SeeLeveL)
- Inani: 0x09, akukho ukukhokhelwa
- I-SeeLeveL izophendula ngesimo se-alamu samanje noma impendulo yephutha uma umsebenzi we-alamu ungasekelwe.
- [0xFE][0xFE][0x24][0x09][0x09][0x32][0xFF][0xFF][0x2A]
SeeLeveL Query Alamu Status Response (BonaLeveL -> ELD)
- Inani: 0x0A, 1 byte payload
- I-SeeLeveL iphendula ngesimo se-alamu samanje (ibhayithi elingu-1; i-alamu esebenzayo = 0x01, ayikho i-alamu = 0x00).
- Example: alarm active: · [0xFE][0xFE][0x24][0x0A][0x0A][0x35][0xFF][0xFF][0x2A]
I-SeeLeveL Error Response (SeeLeveL -> ELD)
- Inani: 0x0F , 1 byte payload
- I-SeeLeveL ikhipha le mpendulo uma umyalo/umlayezo ungasekelwe. I-Payload = ikhodi yomlayezo engasekelwe.
- Example: I-ELD ngaphambilini ikhiphe i-SeeLeveL Query Alarm Liquid Level Message (0x07) kudivayisi ye-SeeLevel engawasekeli ama-alamu:
- [0xFE][0xFE][0x24][0x0A][0x0F ][0x07][0x40][0xFF][0xFF][0x2A]
Umlayezo Wombiko Wezinga Le-SeeLeveL Liquid (SeeLeveL -> ELD)
- Inani: 0x10, 6 noma 7 byte payload, kuye ngokuthi ama-alamu ayasekelwa yini
- I-SeeLeveL idlulisa ileveli yoketshezi (amabhayithi angu-4 = i-int32 engasayiniwe), inombolo yamadijithi kwesokudla sedesimali (ibhayithi elingu-1), isimo sephutha lokubona (ibhayithi elingu-1), nesimo se-alamu (okwamanje iyasebenza = 0x01, hhayi esimweni se-alamu = 0x00) . Inkundla yesimo se-alamu iyinketho futhi ayidluliswa idivayisi ye-SeeLevel engawasekeli ama-alamu. Isimo sephutha lokubuka: akukho ukukhanya = 0x00, izinga lokukhanya eliphansi = 0x01, ukukhanya kwelanga = 0x02, alikho iphutha = 0x10. Esimeni lapho isimo sephutha le-optical SINGENAphutha, ileveli yoketshezi/inombolo yamadijithi kwesokudla sedesimali ishaywa indiva.
- Exampi-le: i-liquid level = 1,083.1, alikho iphutha lokubuka, ama-alamu awasekelwe.
- Ngeleveli yoketshezi, amabhayithi okuqala angu-4 omthwalo okhokhelwayo amelela inani le-hex leleveli, hhayi inani le-BCD.
- [0xFE][0xFE][0x24][0x0F][0x10][0x00][0x00][0x2A][0x4F][0x01][0x10][0xC9][0xFF][0xFF][0x2A]
Sakaza:
- Kwenziwe ngemva kwakho konke ukwamukelwa kwedatha (okuhle noma okubi) noma akukho sikhathi sokuvala isignali ye-808P2 kanye ne-810PS2 gauge. Kwenziwa ngemva kokudluliswa kwedatha okuyimpumelelo okungu-8 kumageji angu-806B/806Bi.
- Njalo ekusakazweni okungu-25 (cishe imizuzwana engu-20) isicelo sokuxhawulana sithunyelwa ukuze kuvunyelwe ukusakazwa okuqhubekayo.
- Ekuvuthweni kwamandla, uma ukusakaza kunikwe amandla, isicelo sokuxhawula sithunyelwa ukuze kuvunyelwe ukusakazwa.
- AKUKUDINGI ukuxhawula ukuze kumiswe ukusakaza.
- Uma isicelo sokuxhawula singaphendulwa ngendlela efanele, ukusakazwa kuyamiswa.
- Izicelo zokuQalisa nokumisa ukusakaza aziphendulwa ngokusobala, ukuqala noma ukumiswa kokusakaza kuyisiqinisekiso.
I-ELD icela ukuqinisekiswa kokuxhawula:
- Qala ukusakaza bese Thumela ileveli yoketshezi
- Isicelo sokuxhawula senziwa njalo lapho esisodwa salezi zicelo sitholwa. Ukuxhawula kufanele kuphendulwe kukho phakathi kuka-500ms, noma-ke impendulo ithathwa njengengavumelekile futhi umlayezo wephutha uzothunyelwa usuka ku-SeeLeveL uye ku-ELD ukuze uthole izimpendulo ngemuva kwesikhathi.
Ifomethi yokuxhawula:
- Isicelo esivela ku-ELD samukelwe yi-SeeLeveL
- I-SeeLeveL iphendula ngesicelo sokuxhawula
- I-ELD ithumela impendulo yokuxhawula
- I-SeeLeveL ithumela impendulo esicelweni sokuqala se-ELD uma impendulo yokuxhawula ilungile.
Ama-alamu awasekelwe okwamanje. Ngokuzayo, uma bethi:
- Okuqukethwe komlayezo 0x08 indawo yokusethwa kwe-alamu, i-alamu yezinga eliphezulu noma eliphansi, kanye nesimo se-alamu samanje.
Umbuzo we-SeeLeveL we-Handshake Frequency during Broadcast Message (ELD -> SeeLeveL)
- Inani: 0x2D · Lokhu kucela izikhathi zokuxhawula izandla, impendulo ikhonjiswe ngezansi.
- [0xFE][0xFE][0x24][0x09][0x2D][0x56][0xFF][0xFF][0x2A]
Imvamisa Yokuxhawula Ngesandla Phakathi Nempendulo Yokusakaza (SeeLeveL -> ELD)
- Inani: 0x2E, 1 byte payload
- Ifrikhwensi ingasukela ekusakazeni oku-1 kuye kwayi-126 ngesicelo ngasinye sokuxhawula. Inombolo iboniswa nge-hex ukusuka ku-0x02 ukuya ku-0x7F (inani eliphelele lokudluliselwa ngakunye ngokuxhawula, kuhlanganise nokuxhawula).
- Ifomethi yomlayezo, imvamisa ngu-20 (0x14)
- [0xFE][0xFE][0x24][0x0A][0x2E][0x14][0x6C][0xFF][0xFF][0x2A]
ISAHLUKO 6 – UMHLAHLANDLELA WOKUXOXA IZINKINGA
| Ikhodi Yephutha | Imbangela | Isixazululo |
 |
Isibonisi asitholi isignali kusuka ku-806-B, 806-Bi, 808-P2 noma 810-PS2 gauge. Okukhiphayo kwe-analog kuzoya ku-0 mA. Lokhu kuhlukanisa isimo sephutha esimweni sokubonisa esinguziro esingu-4 mA. |
Hlola izintambo nokubeka phansi ukuze uthole amaphutha noma uxhumo olubi. Qinisekisa futhi ukuthi i- I-806-B, 806-Bi, 808-P2 noma i-810-PS2 isebenza kahle. |
 |
Isibonisi sithola idatha eyonakele futhi okukhiphayo kwe-analog kuzoya ku-0 mA. | |
 |
Isibonisi asikwazi ukuxhumana nememori yaso. | Isibonisi sizodinga ukuseviswa noma ukushintshwa. |
 |
Isibonisi asikwazi ukuxhumana nesiguquli saso sedijithali ukuya ku-analog. |
Ukunemba:
Okukhiphayo kwe-analogi kunokunemba okungu-± 0.25% yenani lesikali esigcwele, ngakho-ke noma yiliphi inani lokukhiphayo kufanele libe ngaphakathi kuka-0.05 mA yenani "elikahle". Akukho ukulungiswa komsebenzisi okungenziwa ukuze kushintshwe ukunemba.
Njenganoma iyiphi isistimu yedijithali, kukhona amaphutha okuvala kanye nokuncishiswa atholakala kunqubo yezibalo. Kodwa-ke, njengoba i-SEELEVEL Access TM isebenzisa i-10 bit digital to convertor ye-analog, inokunemba okwanele ukuvumela ukulungiswa okugcwele kwegeji yeloli ukuba kubonakale. Qaphela ukuthi igeji yeloli ethumela idatha inokulungiswa kwamabhithi angu-8 kuphela (amasistimu angu-1/3″).
ISAHLUKO 7 – IMICIMBI
| BONISA | |
| Ukunemba kokukhiphayo kwe-analogi | 0.25% yenani lesikali esigcwele ± 0.05 mA |
| Ubuncane bokuhlinzeka ngevolumutage | +10.0 V |
| Umehluko omncane phakathi kwevolthi yokufaka yokufakatage kanye voltage ekuphumeni kwe-analog 4-20 mA | 4.0 V |
| Ukukhama kwamanje | 150 mA noma ngaphansi |
| Ibanga lokushisa lomkhiqizo | -40°C kuya ku-460°C (-40°F kuya ku-+140°F) |
| Indawo ebiyelwe | Material: Aluminium Usayizi: 68 mm ububanzi x 29 mm ukuphakama x 87 mm ukushona (2.7″ ububanzi x 1.1′ ukuphakama x 3.e ukushona) |
| Uhlobo lokubonisa | I-LED enamadijithi angu-4, ingxenye engu-7 yamadijithi angu-10 mm (oe) aphezulu |
| Amandla okubonisa | Isebenza ngamaloli angu-12 V |
| Wring | Ukufakwa kukagesi ngezintambo ezingu-6: amandla angu-12 V (obomvu), aphansi (amnyama), isignali yegeji (ephuzi), okukhiphayo kwe-analog (okumhlophe/okuluhlaza okwesibhakabhaka), i-RS-232 serial receive (purple), kanye ne-RS-232 serial transmit (grey) |
| I-RS-232 ivolumu yokuphumayotagIzinga e | +/- 4.0 V ubuncane |
| Ifomethi ye-serial ye-RS-232 | 9600 XNUMX ngenhla Ifomethi ye-NRZ evamile yomaka/isikhala Imodi ingamabhithi angu-8 I-tx engaguquki Akukho ukulingana Akukho uhlamvu lwekhefu Isiqalo esisodwa I-stop bit eyodwa |
| ULWAZI LOKUPHEPHA | |
| Ukuhambisana kanye Nezitifiketi | INGABE ICES-001(A)/NMB-001(A) Le divayisi ithobela ingxenye 15 yemithetho ye-FCC. Ukusebenza kungaphansi kwezimo ezimbili ezilandelayo: (1) Lolu cingo angeke lubangele ukuphazamiseka okuyingozi, futhi (2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki. Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobelana kungase kuchithe igunya lomsebenzisi lokusebenzisa okokusebenza. Lo mkhiqizo ungakuchaya kumakhemikhali ahlanganisa i-Nickel ne-Lead, aziwa eSifundazweni Sase-California ukuthi abangela umdlavuza, kanye nomthofu owaziwa yiSifundazwe SaseCalifornia ngokubangela ukukhubazeka kokuzalwa noma okunye ukulimala ekuzaleni. Ukuze uthole ulwazi olwengeziwe vakashela ku-www.P65Warnings.ca.gov |
ISAHLUKO 8 – ULWAZI NGEZINKONZO NEWARANTI
Thola imininingwane yenqubo yesimangalo sewaranti bheka ekhasini lethu lokusekela kwelethu webindawo: www.garnetinstruments.com/support/
UMNQWANZO WESIQINISEKISO KU-Hardware
I-Garnet Instruments iqinisekisa ukuthi okokusebenza okukhiqizwe i-Garnet ukuthi kungabi nasici empahleni kanye nokusebenza ngaphansi kokusetshenziswa okujwayelekile kanye nesevisi isikhathi esiyiminyaka emithathu kusukela osukwini lokuthengisa ku-Garnet noma Kumdayisi Ogunyaziwe. Isikhathi sewaranti sizoqala kusukela ngosuku lokuthenga noma lokufakwa njengoba kukhonjisiwe ekhadini lewaranti. Ngaphansi kwalezi ziqinisekiso, i-Garnet izobophezeleka kuphela ekulahlekelweni kwangempela noma ngomonakalo owenzekile bese kuphela ngokwezinga lentengo ye-invoyisi ye-Garnet yomkhiqizo. I-Garnet ngeke ibophezeleke kunoma yikuphi ukukhokhiswa kwabasebenzi ngomonakalo ongaqondile, okhethekile, noma owumphumela. I-Garnet ngeke ibe nesibopho sanoma yikuphi ukususwa kanye/noma ukufakwa kabusha kwemishini ye-Garnet enesici. Lezi ziqinisekiso ngeke zisebenze kunoma yikuphi ukukhubazeka noma omunye umonakalo kunoma iyiphi impahla ye-Garnet eshintshiwe nomaampifakwe nanoma ubani omunye ngaphandle kwabamele imboni ye-Garnet. Kuzo zonke izimo, i-Garnet izogunyaza kuphela imikhiqizo ye-Garnet esetshenziselwa izinhlelo ezamukelekayo ku-Garnet futhi ngaphakathi kwemininingwane yobuchwepheshe yomkhiqizo othile. Ngaphezu kwalokho, i-Garnet izogunyaza kuphela leyo mikhiqizo efakiwe futhi yanakekelwa ngokuya ngemininingwane yefekthri ye-Garnet.
UMKHAWULO KUMAWARANTI
Lezi ziqinisekiso yizona kuphela iziqinisekiso, ezivezwayo noma ezishiwoyo, lapho imikhiqizo ethengiswa khona i-Garnet ne-Garnet ingenzi siqinisekiso sokuthengiswa noma ukufaneleka nganoma iyiphi injongo maqondana nemikhiqizo edayisiwe. Imikhiqizo ye-garnet noma izingxenye zayo okucatshangwa ukuthi azisebenzi kahle umthengi phakathi nesikhathi esishiwo sewaranti kufanele ibuyiselwe kumthengisi, umsabalalisi wendawo, noma ngqo ku-Garnet ukuze ihlolwe futhi isetshenziswe. Noma nini lapho ukuhlolwa okuqondile kwasefekthri, isevisi noma ukushintshwa kudingekile, ikhasimende kufanele kuqala, ngencwadi noma ngocingo, lithole I-Returned Material Authorization (RMA) ku-Garnet Instruments ngokuqondile. Akukho lutho olungabuyiselwa ku-Garnet ngaphandle kwenombolo ye-RMA eyabelwe yona noma ngaphandle kokugunyazwa kwefekthri okufanele. Noma yiziphi izimbuyiselo kufanele zibuyiswe yimpahla ekhokhelwa kusengaphambili kwa: Garnet Instruments, 286 Kaska Road, Sherwood Park, Alberta, T8A 4G7. Izinto ezigunyaziwe ezibuyiswayo zizokhandwa noma zishintshwe ngokubona kwe-Garnet Instruments. Noma yiziphi izinto ze-Garnet ezingaphansi Kwenqubomgomo Yesiqinisekiso Se-Garnet ezibhekwa njengezingenakulungiseka yi-Garnet Instruments zizoshintshwa ngaphandle kwenkokhiso noma kuzokhishwa ikhredithi yaleyo nto kuncike esicelweni sekhasimende.
Uma unesicelo sewaranti noma uma impahla idinga ukuseviswa, thintana nomdayisi wokufaka. Uma udinga ukuxhumana ne-Garnet, singafinyelelwa ngale ndlela elandelayo:
ECANADA
Izinsimbi ze-Garnet
286 Kaska Road Sherwood Park, AB T8A 4G7
ECANADA
i-imeyili: info@garnetinstruments.com
I-UNITED STATES
Inkampani Garnet US Inc.
5360 Granbury Road Granbury,
TX 76049 USA
i-imeyili: infous@garnetinstruments.com
Amadokhumenti / Izinsiza
 |
I-SEELEVEL ACCESS T-DP0301-B Iphothali Yedatha kanye Nesiboniso Esikude esinomphumela ongu-4-20 mA kanye nesixhumi esibonakalayo se-serial [pdf] Incwadi Yeziqondiso Iphothali Yedatha ye-T-DP0301-B nesibonisi Esikude esinokungu-4-20 mA Okukhiphayo kanye nesixhumi esibonakalayo se-serial, T-DP0301-B, Iphothali Yedatha nesibonisi Esikude esinokungu-4-20 mA Okukhiphayo kanye Nesixhumi Esibonakalayo Se-serial, Iphothali Yedatha nesibonisi Esikude, Isibonisi Esikude, Isibonisi, Iphothali Yedatha, Iphothali |
