Schreder BRITELINE GEN2 2 Inguqulo Yangaphandle Imanuwali Yemiyalo Yokukhanyisa Okuguquguqukayo Nephumelelayo

I-BRITELINE
GEN2 2
Inguqulo yangaphandle

Okuqukethwe fihla

1 I-BRITELINE GEN2 2 Inguqulo Yangaphandle Izibani Ezishintshashintshayo Nezisebenzayo

2 UMKHIQIZO UPHELILEVIEW

3 UKUKHUBUKA

4 UKULUNGISWA KWE-ANGLE

5 UKUMELA OKUVUMELEKILE

6 UKUFAKWA KWAMAGIYISI

7 IKHABHELE YOKUPHEPHA

8 UKUXHUMANA KUKAgesi

9 IZINCOMO

10 OKUHLOSIWE IDIVAYISI

11 IZISEKELO - I-HOOD

12 IZIYALELO ZOKUPHEPHA

13 Amadokhumenti / Izinsiza

13.1 Izithenjwa

I-BRITELINE GEN2 2 Inguqulo Yangaphandle Izibani Ezishintshashintshayo Nezisebenzayo

IMIYALELO YOKUFAKA

Gqoka amagilavu AVIKELA

UMKHIQIZO UPHELILEVIEW

I-BRITELINE GEN2 2				IBHOKISI LAMAGIYA NGAPHANDLE
A	B	C		D	E	F	G	H
679 mm 26.73 phakathi	367 mm 14.44 phakathi	723 mm 28.46 phakathi	30kg 6613lbs	426 mm 16.77 phakathi	384 mm 15.11 phakathi	283 mm 11.14 phakathi	243 mm 9.56 phakathi	110 mm 4.33 phakathi	10kg 22.04lbs

I-EPA – Indawo Eqanjiwe Esebenzayo

	a = 0°			a = 30°			a = 45°			a = 70°			a = 90°
	I-S(m2)	I-CxS (m2)	I-EPA (ft2)	I-S(m2)	I-CxS (m2)	I-EPA (ft2)	I-S(m2)	I-CxS (m2)	I-EPA (ft2)	I-S(m2)	I-CxS (m2)	I-EPA (ft2)	I-S(m2)	I-CxS (m2)	I-EPA (ft2)
Si	0.0633	0.08	0.82	1718	0.21	2.	0.2253	0.28	3.	0.2815	0.34	4.	0.2915	0.35	4.
S2	0.2915	0.35	377	0.2764	0.34	4.	0.2428	0.3	3.	0.1530	19	2.	0.0633	0.08	0.82
S3	0.0625	0.08	0.81	0.0625	0.08	0.81	0.0625	0.08	0.81	0.0625	0.08	0.81	0.0625	0.08	0.81

UKUKHUBUKA

Izikulufu namawasha azifakiwe ephaketheni!

Isidingo esincane sesikulufu:

Izinga lokudlidliza	I-IEC 0.5g / ANSI 1.5g
Imfuneko ye-fastener encane	I-1x M20 8.8 noma i-A2-70 DIN9021 iwasha enkulu engenalutho
Ukuqinisa ama-torque	1xM20: 200 Nm 2xM20: 140 Nm

Kunconywe ukusebenzisa i-ejenti elwa nokushaqwa (Tikal Tef-Gel®) !

I-1xM20 enewasha enkulu eyengeziwe
or
I-2xM20 enewasha enkulu eyengeziwe

Ubukhulu bokukhweza

D1	D2	D3	D4	D5	D6
ngo 250mm imizuzu 9.84	70 mm 2.75 phakathi	150 mm 5.9 phakathi	320 mm 12,6 phakathi	460 mm 15.98 phakathi	22 mm 0.86 phakathi

Indawo Yokuthintana Nobuso Obuncane bokulungisa isikulufu esingu-124mm/4.88in Ama-fasteners awafakiwe kuphakheji!
Phawula: indawo echanyuselwe njalo idinga ukusekelwa indawo yokukhweza epulanile eyisicaba njengobuncane.
Ukuthinta indawo ebanzi kuyanconywa, okuncane akuvunyelwe!

UKULUNGISWA KWE-ANGLE

C/1 – UBAKASHI UYA KUFOKO

Khulula i-clamp izikulufu
Lungisa i-engeli yokutshekaIsikali esihlukile sokulungisa ibanga lebhulokhi yokubona engu-50mm ukusuka kumphathi we-luminaire
Ukuthambekela kwengalo yokushwibeka kuyalungiseka ngokunyuka okungu-10 degree ngokuhlobene nesisekelo semfoloko.
I-engeli yokutsheka evunyelwe iphakathi kuka- -10° ukuya ku-90°
Qinisa i-clamp izikulufu Ungadluli amazinga we-torque ahlongozwayo, njengoba kungase kubangele ingxenye yezingxenye!

C/2 – AMABIKI OKUBONA KUMBAKAKI

Khulula i-clamp izikulufu
Lungisa i-engeli yokutsheka I-engeli yokutsheka evunyelwe iphakathi kuka--30° ukuya ku-+30°
Qinisa i-clamp izikulufu Ungadluli amazinga we-torque ahlongozwayo, njengoba kungase kubangele ingxenye yezingxenye!

UKUMELA OKUVUMELEKILE

UKUFAKWA KWAMAGIYISI

IKHABHELE YOKUPHEPHA

Intambo yokuphepha yensimbi kufanele idlule emigodini eboniswe emdwebeni ngokulandelana.
Bese uxhuma iziphetho ezimbili ngebhande lokukhiya bese uqinisa ibhawodi yokukhiya ngesandla.
Ekufakweni okungaphezu kuka-3m ubude: isicelo sesibili sohlelo lokuphepha luyisibopho, esibekelwe umthwalo we-luminaire (isb. ikhebula lokuphepha)”
Ikhebula lokuphepha elingu-2500mm/98.42in lihlinzekwa ne-luminaire.

UKUXHUMANA KUKAgesi

Susa amabhande ohlobo luka-R ebhokisini lokuhlangana kanye nebhokisi legiya .

Vula ibhokisi lokuhlangana kanye nebhokisi legiya

I-Schreder BRITELINE GEN2 2 Inguqulo Yangaphandle Izibani Ezihlukahlukene Nezisebenzayo - ukuhambisana

I-ID yekhebula	Ukuxhumana	Indlala yegilo	Ikhebula elifanele
A	Okokufaka okuyinhloko	M20	06-10mm noma 010-14mm
B	Amapayipi aphinde aqaliswe	M20	06-10mm noma 010-14mm
C	Ukukhishwa kwe-DC ku-optical block	Ukuhambisana kokuvikelwa kwe-M25/ikhebula	06-10mm noma 010-14mm
D	Okokufaka kokufiphaza	M16	04.5-7.5mm noma 07.5-10.5mm
E	Ukufiphaza ukuqalisa kabusha	M16	04.5-7.5mm noma 07.5-10.5mm

Izinhlobo zekhebula nendlala yekhebula
Uma usebenzisa ikhebula elikhulu lobubanzi bangaphandle, ipulaki kanye nophawu oluncane lwangaphakathi olungaphakathi kufanele kukhishwe.
Uma usebenzisa ikhebuli encane yobubanzi yangaphandle, vele ukhiphe ipulaki.

Ukuxhuma ugesi Izintambo kufanele zilandele ngokuqinile imiyalelo yelebula lokumaka, ngaphandle kwalokho umkhiqizo ungonakalisa noma imisebenzi ingase ithinteke!

I-Schreder BRITELINE GEN2 2 Inguqulo Yangaphandle Izibani Ezihlukahlukene Nezisebenzayo - zikagesi

Izintambo ze-AC kanye ne-CONTROL kumele zixhunywe isifaki!

Ukuxhumana	Indlala yegilo	Uhlobo lwekhebula olunconyiwe
Isiginali yokulawula	PG16(Ø5-Ø7.5/Ø7.5-Ø10)	I-H05RN-F, 2 x 1-1.5mm
I-AC INPUT	PG20(Ø6-Ø10/Ø10-Ø14)	I-H07RN-F, 3 x 1.5-4mm
Umphumela we-DC	PG20(Ø6-Ø10/Ø10-Ø14)	I-H05RN-F, 5 x 1.0mm² I-H07RN-F, 5 x 1.5mm²

Vala ibhokisi lokuhlangana kanye nebhokisi legiyaVala ikhava yebhokisi lokuhlangana kanye nebhokisi legiya, bese ubuyisela amabhande ohlobo lwe-R kukho kokubili.
Ishubhu lensimbi elingu-1.5m kanye nekhebula le-DC elihlinzekelwe ibhokisi lokuhlangana - ukuxhumana kwebhokisi lamagiya.

IZINCOMO

Amabanga azungezile Okungenani ibanga eliyimitha elingu-1 kufanele ligcinwe ezindongeni ezizungezile, phansi, nosilingi kuzo zonke izinhlobo zokukhweza/zokuthambekela.
Inani eliphakeme lezibani nge-MCB ngayinye

Umkhiqizo	Umshayeli	Uhlobo lwe-MCB B
Umkhiqizo	Umshayeli	B10	B13	B16	B20	B25	B32	B40
I-BRITELINE GEN2 2 @220V	I-EUM-680MG/BG	0	1	1	1	2	2	3
I-BRITELINE GEN2 2 ©480V	I-ESM-680MG/BG	1	1	1	2	2	3	4
Umkhiqizo	Umshayeli	Uhlobo lwe-MCB C
Umkhiqizo	Umshayeli	C10	13	16	C20	C25	C32	C40
I-BRITELINE GEN2 2 ©220V	I-EUM-680MG/BG	0	1	1	1	2	2	3
I-BRITELINE GEN2 2 @480V	I-ESM-680MG/BG	1	2	2	3	4	5	7

OKUHLOSIWE IDIVAYISI

Amabhulokhi amancane ohlangothini lwe-optical block aqinisekisa ukufakwa kwe-devide ehloselwe eyakhelwe ngaphakathi.
Indawo 1 yedivayisi ephokophelwe yangaphandle idinga ukuvumelanisa nendawo 2 kanye no-3.

IZISEKELO - I-HOOD

IZIYALELO ZOKUPHEPHA

Umthombo wokukhanya oqukethwe kulesi sibani uzothathelwa indawo umkhiqizi kuphela noma i-ejenti yakhe yesevisi noma umuntu ofanayo oqeqeshiwe. Vala amandla njalo ngaphambi kokufaka, ukulungisa noma ukulungisa.
I-RISK GROUP 2 -
ISEXWAYISO! Imisebe yokubona eyingozi ingase ikhishwe kulo mkhiqizo. Ungagqolozeli ukukhanya lapho usebenza ngoba kungase kube yingozi emehlweni. I-luminaire kufanele ibekwe ukuze kungalindelwa ukugqolozela ukukhanya isikhathi eside endaweni engaphansi kuka-0.2m.
Lo mkhiqizo uqukethe umthombo wokukhanya wesigaba G noma ngaphezulu sokusebenza kahle kwamandla.
Endabeni yekhebula le-PVC le-insulated mains, isifaki KUFANELE siqinisekise ukuthi ikhebula LONKE livikelekile ezimweni zezulu, ikakhulukazi emisebeni ye-UV nemvula, ngokuqinisekisa ukuthi ikhebula liqukethwe ngaphakathi kwe-luminaire nesigxobo.
Uxhumano luka-Y: Esimeni esibucayi ocingweni, kufanele kushintshwe umenzi, umsabalalisi noma uchwepheshe kuphela, ukuze kugwenywe izingozi.Iqembu Lengozi
I-IEC/EN 62471 Ukuphepha Kwezithombe
Ukuhlola okusekelwe ku-IEC/TR 62778, Cmax

Copyright © Schréder S.A. 2023 – Umshicileli Omkhulu: Stéphane Halleux – B-4000 Liége, Rue de Mons 3 (Belgium)
Ulwazi, izincazelo nemifanekiso lapha kungokwenkomba kuphela futhi kungaphansi kwezinguquko ngaphandle kwesaziso
www.schreder.com
Umfundisi C | 08-2023

Amadokhumenti / Izinsiza

I-Schreder BRITELINE GEN2 2 Inguqulo Yangaphandle Izibani Ezihlukahlukene Nezisebenzayo [pdf] Incwadi Yeziqondiso
I-BRITELINE GEN2 2 Inguqulo Yangaphandle Izibani Ezishintshashintshayo Nezisebenzayo, I-BRITELINE GEN2 2, Inguqulo Yangaphandle Ukukhanyisa Okuguquguqukayo Futhi Okuphumelelayo, Inguqulo Eguquguqukayo Nokukhanya Okuphumelelayo, Ukukhanyisa Okuphumelelayo, Ukukhanyisa

Izithenjwa

Imaniwali yosebenzisayo