Rugged Radios Active Noise Filter for Radio and Intercom Systems
Imininingwane
- Imodeli: V.01
- Power Source: 12V Battery or Pulse Bar
- Features: Master Power Switch, Active Filter
Connecting the Master Power Switch and Active Filter
To connect the master power switch and active filter, follow these steps:
- Locate the master power switch.
- Connect the master power switch to the active filter.
I-Master Power switch
The master power switch is used to control the power supply to the device. Follow the manufacturer’s instructions for proper usage.
- P/N: ACTIVE-FILTER-WP: Having noise issues with your radio and intercom setup?
- Connect this Audio Filter inline with your radio and intercom to suppress noise generated through the charging system/power supply.
- Alternating current fluctuations from any electrical components/accessories contribute to communication noise and disruption.
- Using the simple plug-and-go Audio Filter improves your communication for both your intercom and/or radio.
- Simply install the Audio Filter inline on the power lead to your component and instantly hear the remarkable results.
- The Noise Filter is an affordable accessory that provides profound audio improvement and provides great value for your small investment.
KUBALULEKILE: For non-Rugged brand radios and intercoms, make sure you check your power supply connections prior to installation. Other models may have reversed power leads.
Isihlungi esisebenzayo
The active filter helps in reducing noise and interference in the power supply. Connect it as follows:
- Not Used: Make sure this connection is not used.
- Ground to Vehicle Chassis: Connect the ground wire to the vehicle chassis for grounding.
- To Intercom: Connect to the intercom system.
- To Switch to Radio: Connect to switch for radio functionality.
- To 12V Power Source: Connect to a 12V power source such as a battery or pulse bar adapter.
Imibuzo Evame Ukubuzwa
What is the purpose of the active filter?
The active filter helps in reducing noise and interference in the power supply, ensuring a clean power output.
Can I connect the device directly to a battery?
Yes, you can connect the device to a 12V battery or pulse bar adapter for power.
Amadokhumenti / Izinsiza
 |
rugged radios Active Noise Filter for Radio and Intercom Systems [pdf] Incwadi Yeziqondiso Active Noise Filter for Radio and Intercom Systems, Filter for Radio and Intercom Systems, Radio and Intercom Systems, Intercom Systems, Systems |