I-ROGA Instruments VC-02 Vibration Calibrator

Amanothi: Njengethuluzi elinembayo, qiniseka ukuthi ufunda imanuwali ngokucophelela ngaphambi kokuyisebenzisa. Isikhathi sewaranti yizinyanga eziyi-18, uma kukhona izinkinga, sicela usithinte.

Kuphelileview

I-VC-02 vibration calibrator iqukethe inzwa ejwayelekile, amajeneretha esignali, amandla ampama-lifiers, isimo sesignali kanye nesifunda sokubonisa isilawuli sedijithali esinesakhiwo esincane, esiqinile nesizinzile. Kuyi-calibrator egcwele imisebenzi egcwele yenkundla yezimboni noma ilabhorethri; Ukunemba okuphezulu, ukusebenza okulula, kulula ukuyisebenzisa. Ingakwazi ukulinganisa izinhlobo ezihlukahlukene zezinzwa zokudlidliza njengezinzwa zokusheshisa, izinzwa zejubane kazibuthe nezinzwa zokususwa kwe-eddy, futhi ilinganise amanye amasistimu okuqapha ukudlidliza kanye nesistimu yokutholwa kwedatha.

Imininingwane Yezobuchwepheshe

1. Ukunemba: ± 5%
2. Imvamisa yesignali yokudlidliza: I-10Hz-10kHz (isiginali ye-sinusoidal),
3. ukunemba kwefrikhwensi: <0.05Hz
4. Umthwalo Omkhulu: 200 g
5. uhlobo lwenzwa elinganisiwe:
   • Imodi yokushaja i-Accelerometers
     I-IEPE Mode Accelerometers
     Voltage Ama-Accelerometers wemodi yokuphuma
   • I-4-20mA Imodi Yokukhipha I-Accelerometers noma Izinzwa Zesivinini
   • Eddy Displacement Izinzwa
6. Ibanga Lokufaka Okuphezulu:
   Imodi yokushaja: ± 3000pC; 2.5.2
   VoltagImodi ye-e(IEPE): ± 3000mV
7. Ukudlidliza Ampububanzi be-litude (RMS):
   Ukusheshisa: 50.00m/s2 2.6.2
   Isivinini: 150.00 mm/s 2.6.3
   Ukuphakama: 1500 m
8. Ukudlidliza okuphezulu Amplitude & Maximum Load
   Ngokuba i-VC-02 incane, ngakho-ke ukulinganisa kwezinzwa ezahlukene kumafrikhwensi ahlukene (isisindo esihlukile), i-calibrator ingakhipha ampI-litude ayifani. Ukudlidliza okuphezulu ampi-litude kanye nomthwalo omkhulu emazingeni athile, imi kanje: Wonke amanani

kukhona i-RMS.

Layisha Imvamisa	≤100 amagremu			≤200 amagremu
	a(m/S2)	v(mm/S)	d(μm)	a(m/S2)	v(mm/S )	d(μm)
10Hz	10	100	150 0	10	100	150 0
20Hz	20	150	120 0	20	150	1200
40Hz	50	200	800	30	100	500
80Hz	50	100	200	30	60	120
160Hz	50	50	50	30	30	30
320Hz	50	25	12	30	15	7
640Hz	50	12	3	40	10	2.5
1kHz	50	8	*	40	6	*
2kHz	50	4	*	30	2.4	*
4kHz	50	2	*	30	*	*
6kHz	50	*	*	30	*	*
8kHz	50	*	*	30	*	*
10kHz	50	*	*	30	*	*

• Kumafrikhwensi aphezulu, inani lokudlidliza lesivinini nokususwa endaweni lincane kakhulu.

Isikulufu sokukhweza sohlobo lwe-M5
Izinga lokushisa lokusebenza: 0 kuya +55; Umswakamo Ubukhulu obungu-95% RH
Ukunikezwa kwamandlaAC220V ±10% 5060Hz
Usayizi 300mm×210mm×130mm
Isisindo esingaba ngu-6.5Kg

Isebenza kanjani

Umdwebo wephaneli

1. Isokhethi yokufaka amandla: xhuma ugesi we-AC 220V;
2. Ukushintshwa Kwamandla: Iswishi yamandla ye-AC 220V
3. Izindlela zokuxhumana ze-USB: Xhuma i-PC ukuze ulawule ukudlidliza ngesofthiwe;
4. Isokhethi yokukhipha isignali yenzwa yokuhlola: ukuphuma kwesignali yenzwa yokuhlola kungalinganiswa ngamamitha amaningi edijithali noma amanye amathuluzi ngale sokhethi;
5. Izikulufu zokukhweza zezinzwa ze-eddy: ubakaki wokuhlola ungafakwa kuphaneli yensimbi yokulinganisa ngezimbobo zesikulufu ukuze kuhlolwe izinzwa zamanje ze-eddy;
6. Ithebula: lokulungisa izinzwa ezilungisiwe;
7. Isokhethi yokokufaka: xhuma okukhiphayo kwezinzwa ezilungisiwe
8. 4 ~ 20mA amatheminali okokufaka: xhuma okukhiphayo kwezinzwa eziphumayo ezingu-4 20mA;
9. Ukunikezwa kwamandla ka-24V: nikeza amandla okuhlola izinzwa ezifana nezinzwa ze-eddy
10. Ukudlidliza ampi-litude adjustment knob
11. Ukudlidliza ampi-litude adjustment knob
12. I-vibration frequency adjustment knob 13. Iwindi le-LCD

Izinyathelo Zokusebenza

1. Inzwa yokukhweza
   
   1. Ukufakwa kwenzwa (Ukusheshisa noma iVelocity ): beka isikulufu se-M5, inzwa egxilwe etafuleni ngokushintshana. Izinzwa ezihlukene, kwesinye isikhathi zidinga ukusebenzisa isikulufu esihambelanayo sokuguqula;
   2. Ukufakwa kwenzwa ye-eddy: Beka ibhentshimakhi epuleti lokuhlola, i-eddy sensor fixed suite ngokulandelana;
      
   3. Lapho ulinganisa, beka isilinganisi sizinze ngangokunokwenzeka. Uma ushintsha inzwa, udinga ukuvala ukunikezwa kwamandla. Ngemuva kokulinganisa, inzwa kufanele isuswe ukuze igweme inzwa ishiywe isikhathi eside etafuleni.
2. Uxhumano Lwekhebula
   1. I-Calibrator ingakala futhi ibonise inani lokuphuma kwenzwa elinganiselwe, ngakho-ke ukuphuma kwalezi zinzwa njengemodi yokushaja, imodi ye-IEPE neVol.tagImodi ye-e ingaxhunywa kusokhethi yesokhethi yokufaka isignali(BNC);
   2. Ngokukhishwa kwenzwa engu-4-20 mA, sicela uxhume isignali kutheminali ye-“4-20 mA”, ithuluzi lokulinganisa langaphakathi liboniswe ngezansi.
      
   3. Ngenzwa ye-eddy displacement, i-calibrator inganikeza amandla ku-preampi-lifier; Itheminali eluhlaza ingu -24VDC, emnyama ingu-0V; Futhi umphumela we-preampi-lifier xhuma kusokhethi yesignali ye-BNC;
   4. Uma uthemba ukulinganisa isignali yokuphumayo yenzwa elungisiwe, sicela uhlole isokhethi yesignali yokuphuma kwenzwa(BNC); Ukuze lesi siginali ingashintshwa ngokuzenzakalelayo yi-calibrator, ngakho-ke isignali yokuphuma kufanele ibe ampkufakwe i-X1 noma i-X10.
   5. Xhuma kumandla we-AC: Sicela uqinisekise ukuthi ugesi we-AC kufanele ube ngu-220 V / 50 Hz;
   6. Uma uthemba ukusebenza nge-PC, xhuma isikali ku-PC ngekhebula le-USB elilodwa.
3. Ukusetha kokusebenza
   Ngemva kokuhlola izintambo nezinzwa zilungiswe kahle, vula amandla bese i-LCD izobonisa kanje:
   
   1. Uhlobo Lwenzwa lungakhetha uhlobo lwenzwa ehloliwe njenge-Acceleration, Velocity kanye Nokususwa. Uhlobo Lokufaka: khetha uhlobo lokokufaka lwenzwa ehloliwe njenge-PE(Imodi yokushaja), Imodi ye-IEPE, iVoltagImodi ye-e kanye neModi yokukhipha engu-4-20mA.
      Indlela Yokusetha: Cindezela inkinobho ingashintsha noma
      Thayipha>futhi uphikisane nokuhamba kwewashi noma ngokwewashi le knobhu yendawo yamanje. zingashintsha izinhlobo
   2. I-Vibration Freq: Ukulungiswa kwe-Vibration Frequency
      Indlela Yokusetha: Cindezela inkinobho ukushintsha indawo yekhesa; counter clockwise noma clockwise lungisa le knobhu , setha ifrikhwensi ;
      Ukudlidliza Amp: Ukudlidliza Ampukulungiswa kokufunda
      Indlela yokusetha: Guqula lesi sibali seknobhu siye njengewashi, singancishiswa ukudlidliza ampamandla; Futhi Guqula le knobhu ngokwewashi, ungakwazi ukwengeza ukudlidliza ampukufunda. I-LCD ibonisa leli nani le-RMS lokudlidliza ampukufunda. Sicela uqaphele ampi-litude ayikwazi ukudlula okukhiphayo okukaliwe okuphezulu ampamandla; uma usuqedile, sicela usethe i amplitude ezingeni elincane.
   3. Okukhiphayo: ukukhishwa kwezinzwa ezilungisiwe, inani liyi-RMS;
   4. Inzwa.: Ukuzwela kwenzwa elinganiselwe.

Ukusebenza Kwesoftware

Sicela ubheke umhlahlandlela womsebenzisi wesofthiwe.

Izesekeli

1. Umhlahlandlela Womsebenzisi: 1
2. Isitifiketi :1
3. Izintambo Zokufaka:4
4. Amakhebula Okukhiphayo:1
5. Ikhebula Lamandla:1

Amadokhumenti / Izinsiza

I-ROGA Instruments VC-02 Vibration Calibrator [pdf] Umhlahlandlela Womsebenzisi I-VC-02, I-Vibration Calibrator, i-VC-02 Vibration Calibrator

Izithenjwa

• Imaniwali yosebenzisayo