I-RICE LAKE 1280 Inkomba Yesisindo Esihlelekayo kanye Nomlawuli
Imininingwane
Izidingo zamandla
Ikhadi le-adaptha yebhasi eneModuli ye-Modbus TCP, Amandla e-DC
- I-Supply Voltage6VDC
- I-Draw Yamanje 100 mA
- Umdwebo Wamanje Omkhulu 300 mA
- Ukusetshenziswa kwamandla 1.8 W
Imininingwane Yezokuxhumana
- Ikhebula elisontekile elingafika ku-100Mbits/s
Imininingwane Yemvelo
- Izinga Lokushisa
- Kuqinisekiswe 14° kuya ku-104° F (-10° ukuya ku-40° C)
- Isebenza -4° ukuya ku-131° F (-20° ukuya ku-55° C)
- Ukuvumelana
Imiyalo yokusetshenziswa komkhiqizo
Ukufakwa
Follow the installation instructions provided in the manual to install the Modbus TCP Interface inside the indicator enclosure. Ensure the indicator is placed in a suitable NEMA Type 4X stainless steel enclosure for washdown environments.
Ilungiselela Izilungiselelo Zenethiwekhi
Refer to section 3.0 of the manual for detailed instructions on configuring the network settings for the Modbus TCP Interface.
Imiyalo
Section 4.0 provides information on output data format, byte swapping, and command descriptions. Familiarize yourself with these commands to effectively communicate with the indicator using the Modbus TCP Interface.
ISAZISO SOKUHAMBISANA:
Uma ikhadi lingasakhulumi ngedatha efanele, shintsha ipharamitha ye-SWAP ibe “BYTE” kusibonisi
- © I-Rice Lake Weighing Systems. Wonke Amalungelo Agodliwe.
- I-Rice Lake Weighing Systems® inguphawu lokuthengisa olubhalisiwe lwe-Rice Lake Weighing Systems.
- Wonke amanye amagama ebhrendi noma omkhiqizo ngaphakathi kwalokhu kushicilelwa yizimpawu zokuthengisa noma izimpawu zokuthengisa ezibhalisiwe zezinkampani zabo.
- Lonke ulwazi oluqukethwe kulolu shicilelo, ngokwazi kwethu, luphelele futhi lunembile ngesikhathi lushicilelwa. I-Rice Lake Weighing Systems inelungelo lokwenza izinguquko kubuchwepheshe, izici, ukucaciswa nokuklama kwezinto zokusebenza ngaphandle kwesaziso.
- Inguqulo yamanje kakhulu yalokhu kushicilelwa, isofthiwe, i-firmware kanye nazo zonke ezinye izibuyekezo zomkhiqizo zingatholakala kwethi webindawo: www.ricelake.com
Umlando Wokubuyekeza
Lesi sigaba silandelela futhi sichaza ukubuyekezwa okwenziwa ngesandla ukuze kuqwashiswe ngezibuyekezo ezinkulu.
| Buyekeza | Usuku | Incazelo |
| G | Februwari 29, 2024 | Umlando wokubukeza osungulwe; Kwengezwe imininingwane yekhadi lenketho yesizukulwane sokuqala nesesibili |
Ithebula i. Umlando Wencwadi Yokubuyekeza
Amasemina okuqeqeshwa kobuchwepheshe atholakala nge-Rice Lake Weighing Systems. Izincazelo izifundo kanye nezinsuku kungaba viewed ku www.ricelake.com/training noma etholwe ngokushaya ucingo 715-234-9171 nokucela umnyango wokuqeqesha.
Isingeniso
- The Modbus TCP Interface can be used to read and write data to the indicator using a PLC or another primary controller. This manual provides information for installation and use of this product.
- The Modbus TCP Interface is installed inside the indicator enclosure and installation in NEMA Type 4X stainless steel enclosures permits use in washdown environments.
- See the indicator technical manual for additional installation information and detailed descriptions of indicator functions.
ISEXWAYISO: Some procedures described in this manual require work inside the indicator enclosure. These procedures are to be performed by qualified service personnel only.
- Amamanuwali nezinsiza ezengeziwe ziyatholakala ku-Rice Lake Weighing Systems webindawo ku www.ricelake.com
- Ulwazi lwewaranti lungatholakala ku- webindawo ku www.ricelake.com/warranties
Kuphelileview
Isilawuli esiyinhloko sixhumana ngokuthumela imiyalo ngesixhumi esibonakalayo se-Modbus TCP kusibonisi. Inkomba iphendula isilawuli esiyinhloko ngedatha nesimo kuye ngomyalo othunyelwe. Lezi zenzo zibizwa ngokuthi yi-polled response.
Ukuhambisana ne-FCC
I-united states
Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi A, ngokususelwe Engxenyeni 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi lapho okokusebenza kusebenza endaweni yezohwebo. Lesi sixhobo sikhiqiza, sisebenzise, futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nebhukwana lemiyalo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Ukusebenza kwalesi sisetshenziswa endaweni okuhlalwa kuyo kungase kubangele ukuphazamiseka okuyingozi lapho umsebenzisi kuyodingeka ukuthi alungise ukuphazamiseka ngezindleko zakhe.
Canada
Le mishini yedijithali ayiweqi imikhawulo Yekilasi A yokukhishwa komsindo werediyo ezinsizeni zedijithali ebekwe ku-Radio Interference Regulations yoMnyango Wezokuxhumana wase-Canada.
Ukufakwa
- Modbus TCP Interface specific functions are provided by a Modbus TCP module.
- Imojula ixhuma endaweni evulekile ebhodini le-CPU futhi inikeza amandla nokufinyelela kusuka ebhasini lenkomba kuya kumojula.
- KUBALULEKILE: See the indicator technical manual for installation instructions.
- Amakhadi enketho yesixhumi esibonakalayo esibonisi se-1280 Enterprise Series abelana ngebhodi lenkampani yenethiwekhi efanayo (PN 164756). Ibhodi lenkampani yenethiwekhi lixhuma endaweni evulekile ebhodini le-CPU futhi linikeza amandla nokufinyelela ukusuka ebhasini elikhomba kuya kumojula. 1280 amakhithi ekhadi lenketho yesixhumi esibonakalayo athunyelwa nemojula kanye nebhodi lenkampani yenethiwekhi selivele lihlanganisiwe.
| Ukwenziwa Kwekhadi | Ukuhlonza Izimpawu |
| Isizukulwane Sokuqala | ibhodi eluhlaza |
| Isizukulwane Sesibili | blue board, push button |
Ithebula 2-1. Ulwazi Lokuhlonza Ikhadi Lokukhetha
QAPHELA: Only second-generation cards (blue boards) can have the firmware updated. See the 1280 Enterprise Technical Manual (PN 167659) for further instructions.
- Inkomba ibona ngokuzenzakalelayo wonke amakhadi ongakhetha afakiwe uma iyunithi ivuliwe. Akukho ukucushwa okuqondene nehadiwe okudingekayo ukuze kukhonjwe ikhadi elifakiwe ohlelweni.
- ISEXWAYISO: Always disconnect the power before opening an enclosure.
- Interface option cards are not hot swappable.
- ISEXWAYISO: Ibhande lesihlakala eliphansi kufanele ligqokwe ukuze kuvikelwe izingxenye ze-electrostatic discharge (ESD) lapho usebenza ngaphakathi kwendawo ebiyelwe noma ukuhlanganiswa kwesilawuli.
Imiyalelo yokufaka
- Nqamula amandla kusibonisi.
- Bheka imanuwali yezobuchwepheshe ye-1280 (PN 167659) ukuze uthole ukufinyelela ebhokisini Lomhlangano Wabalawuli ngemodeli ethile.
- Susa isikulufu esivikela ipuleti lekhava yesikhala esihlosiwe sebhokisi Lokuhlanganiswa Kwesilawuli, beka eceleni ipuleti lekhava yesikhala bese ulondoloza isikulufu.
- Faka i-faceplate kumojuli futhi uhlanganise ibhodi lemojula yesilayidi endaweni phakathi kwendawo.
- Vikela i-faceplate kanye nokuhlanganiswa kwebhodi lemojuli endaweni ngesikulufu esikhishwe ngaphambilini.
QAPHELA: Ikhebuli yesixhumi esibonakalayo ihanjiswa ngokubamba intambo endaweni evalekile ye-Universal kanye ne-Wall mount.
Okunye, ukuxhuma okufakwe ku-chassis kungafakwa endaweni ebiyelwe. - Bheka imanuwali yezobuchwepheshe ye-1280 ukuze ufake kabusha ibhokisi Lomhlangano Wokulawula.
Izinkomba zesimo se-LED
Uhlu lwe-LED kumojuli ye-Modbus TCP Interface inikeza ulwazi lwesimo lokuxazulula inkinga.
QAPHELA: A test sequence is performed on this LED 1 and 2 during startup.
I-LED Yesimo Senethiwekhi (Into 1)
| Umbuso we-LED | Incazelo |
| Valiwe | Awekho amandla noma awekho ikheli le-IP |
| Okuhlaza | Imojuli isesimweni sokusebenza noma sokungenzi lutho |
| Okuluhlaza, Okukhanyayo | Ilinde ukuxhumana |
| Okubomvu | Ikheli le-IP eliyimpinda, umcimbi we-FATAL |
| Okubomvu, Okukhanyayo | Cubungula Isikhathi sokuvala esisebenzayo |
I-LED Yemojuli Yemojuli (Into 2)
| Umbuso we-LED | Incazelo |
| Valiwe | Awekho amandla |
| Okuhlaza | Ukusebenza okuvamile |
| Okubomvu | Major fault; Module is in state EXCEPTION (or FATAL event) |
| Okubomvu, Okukhanyayo | Minor fault in diagnostic object; IP conflict |
I-LED yesixhumanisi/Yomsebenzi (Into 3)
| Umbuso we-LED | Incazelo |
| Valiwe | Asikho isixhumanisi, akukho msebenzi |
| Okuhlaza | Isixhumanisi simisiwe |
| Green, Flickering | Umsebenzi |
Ithebula 2-4. I-LED yesixhumanisi/Yomsebenzi
Imbobo ye-RJ45 (Into 4)
I-interface ye-Modbus TCP isekela i-10/100Mbit, ukusebenza kwe-duplex okugcwele noma okuyingxenye.
1280 Modbus TCP Interface
Ilungiselela Izilungiselelo Zenethiwekhi
Ukulungisa izilungiselelo zenethiwekhi kwenziwa kusetshenziswa i web isiphequluli noma insiza yokumisa ye-Anybus IP. Ukusetha izilungiselelo zenethiwekhi usebenzisa i web isiphequluli.
- Vula isiphequluli bese uthayipha ikheli le-IP lekhadi.
- Shintsha noma yiziphi noma zonke izilungiselelo.
- Click on Store settings.
Ukusetha izilungiselelo zenethiwekhi usebenzisa i-Anybus IP Configuration program.
- Open the configuration program.
QAPHELA: The configuration program can be found at the following link: https://www.ricelake.com/media/rbuicpx3/tb-us-197149-ipconfig.pdf - Chofoza inkinobho ethi Skena uma idivayisi ingabonisi kumenyu.
- Chofoza kabili kudivayisi. Imenyu iboniswa nezilungiselelo zamanje zenethiwekhi.
- Shintsha noma yiziphi noma zonke izilungiselelo.
- Chofoza inkinobho ethi Setha.
Imiyalo
Imiyalo isetshenziswa idivayisi eyinhloko ukuthumela nokwamukela idatha evela kusixhumi esibonakalayo njengenombolo ephelele noma idatha yephoyinti elintantayo. Okuyinhloko kuthumela amabhayithi ayisishiyagalombili kufomethi yokuphumayo ukuze kubhalwe imiyalo kusibonisi futhi ifunde amabhayithi ayisishiyagalombili ngefomethi yokufaka ukuze kufundwe idatha evela kusibonisi.
Ukuphatha Iphuzu ledesimali
Integer commands return no decimal point information to the primary. For exampI-le, inani elingu-750.1 eliboniswe esihlokweni libuyiselwa kokuyinhloko njengo-7501. Imiyalo yamaphuzu antantayo isekela ulwazi lwamaphoyinti wedesimali ngaphandle kokuphatha okukhethekile.
Ifomethi Yedatha Yokukhipha
Ukwenza umyalo, owokuqala usebenzisa ifomethi yomyalo ophumayo ukuthumela amagama amane we-16-bit kusixhumi esibonakalayo. Lawa magama amane aqukethe umyalo kanye nemingcele edingekayo yokuwenza. Ifomethi yomyalo wokuphumayo ikhonjiswe kuThebula 4-1.
|
Byte |
Bhalisa
V 1.02 and Earlier |
Bhalisa
V 1.03 and Later |
Incazelo |
| Ibhaythi 0 | 40005 | 40001 | Inombolo yomyalo |
| Ibhaythi 1 | |||
| Ibhaythi 2 | 40006 | 40002 | Ipharamitha |
| Ibhaythi 3 | |||
| Ibhaythi 4 | 40007 | 40003 | Inani (MSW) |
| Ibhaythi 5 | |||
| Ibhaythi 6 | 40008 | 40004 | Inani (LSW) |
| Ibhaythi 7 |
Ithebula 4-1. 1280 Ifomethi Yedatha Yokuphuma
QAPHELA:Bheka Isigaba 4.1.1 ekhasini 15 ukuze uthole amapharamitha okushintshaniswa kwe-BYTE.
- Isici sokukhiya, esifakwe kumshini wokwamukela inkomba, sibheka ushintsho kudatha yefomethi yokuphumayo ukuze kuvinjelwe ukukhukhuleka ngomyalo ofanayo.
- Bheka imiyalo ethintekile ephawulwe kuThebula 4-2 ekhasini 13 kanye no (*).
- Imiyalo ephindaphindiwe kufanele ihlukaniswe nanoma yimuphi omunye umyalo ovumelekile/ipharamitha/inani inhlanganisela.
Inani lepharamitha
Ekuxhumaneni nesikhombi esinezilinganiso eziningi, inombolo yesikali ithunyelwa egameni lesibili lefomethi yomyalo wokuphumayo. Uziro (0) umele isikali samanje. Eminye imiyalo idinga ipharamitha ngaphandle kwenombolo yesikali, njengenombolo yesikhala, inombolo ye-setpoint, noma enye ipharamitha yokukhetha. Bheka izincazelo zemiyalo eSigabeni 4.3 ekhasini 19 ukuze uthole izimfuneko ezithile zomyalo.
Inani
Amagama esithathu nesine efomethi yokuphumayo asetshenziselwa ukudlulisa idatha yenani kumiyalo ethile. Amanani afakwe kulawa magama athathwa njengezinombolo eziphelele ezingasayiniwe noma amanani wamaphuzu antantayo, kuye ngomyalo.
Inombolo yomyalo
- Inombolo emele umyalo wenkomba ithunyelwa ngegama lokuqala.
- Table 4-2 lists the commands that can be specified for indicators.
- Some commands may not be available on all indicators.
| Idesimali | Hex | Umyalo |
| 0 | 0x000 | Buyisela Isimo Nesisindo (inamba) |
| 1 | 0x001 | Bonisa Isiteshi |
| 2 | 0x002 | Bonisa Isisindo Esiphelele |
| 3 | 0x003 | Bonisa Isisindo Esiphelele |
| 9 | 0x009 | Cindezela ukhiye we-Gross/Net (guqula) |
| 10 | 0x00A | Uziro* |
| 11 | 0x00B | Bonisa i-Tare* |
| 12 | 0x00c | Faka i-Tare* |
| 13 | 0x00D | Thola i-Tare* |
| 14 | 0x00E | Sula i-Tare* |
| 16 | 0x010 | Amayunithi Ayisisekelo |
| 17 | 0x011 | Amayunithi Esibili |
| 18 | 0x012 | Amayunithi Emfundo Ephakeme |
| 19 | 0x013 | Cindezela ukhiye wamayunithi (guqula amayunithi) |
| 20 | 0x014 | Isicelo sokuphrinta |
| 21 | 0x015 | Bonisa i-Accumulator |
| 22 | 0x016 | Sula i-Accumulator |
| 23 | 0x017 | Phusha Isisindo ku-Accumulator |
| 32 | 0x020 | Buyisela Isamba (inamba) |
| 33 | 0x021 | I-Return Net (inamba) |
| 34 | 0x022 | I-Return Tare (inamba) |
| 37 | 0x025 | Buyisa Ukuboniswa Kwamanje (inamba) |
| 38 | 0x026 | I-Accumulator yokubuyisela (inamba) |
| 39 | 0x027 | Izinga Lokubuyisela Loshintsho (inamba) |
| 95 | 0x05F | Setha i-Batching State |
| 96 | 0x060 | Iqoqo lokuqala |
| 97 | 0x061 | Iqoqo Misa Isikhashana |
| 98 | 0x062 | Setha kabusha iqoqo |
| 99 | 0x063 | Isimo seqoqo |
Ithebula 4-2. Imiyalo Ekude
| Idesimali | Hex | Umyalo |
| 112 | 0x070 | Khiya Iphaneli Yangaphambili Yesikhombi |
| 113 | 0x071 | Vula Iphaneli Yangaphambili Yenkomba |
| 114 | 0x072 | Setha Okukhiphayo Kwedijithali |
| 115 | 0x073 | CISHA Okukhiphayo Kwedijithali |
| 116 | 0x074 | Funda Isimo Se-I/O Yedijithali |
| 128 | 0x80 | Nika amandla Isibambi Somyalo Webhasi |
| 253 | 0x0FD | Akukho ukusebenza |
| 254 | 0x0FE | Setha kabusha inkomba |
| 256 | 0x100 | Buyisela Isimo Nesisindo (ntanta) |
| 268 | 0x10c | Faka i-Tare (ntanta) |
| 288 | 0x120 | Funda Okuphelele (ntanta) |
| 289 | 0x121 | Funda i-Net (ntanta) |
| 290 | 0x122 | Funda iTare (ntanta) |
| 293 | 0x125 | Funda Isibonisi Samanje (ntanta) |
| 294 | 0x126 | I-Accumulator yokufunda (ntanta) |
| 295 | 0x127 | Izinga lokufunda lokushintsha (ntanta) |
| 304 | 0x130 | Setha Inani Lephoyinti (float) |
| 305 | 0x131 | Setha i-Setpoint Hysteresis (float) |
| 306 | 0x132 | Setha Umkhawulokudonsa we-Setpoint (float) |
| 307 | 0x133 | Setha i-Setpoint Preact (float) |
| 320 | 0x140 | Funda Inani lephoyinti (float) |
| 321 | 0x141 | Funda i-Setpoint Hysteresis (float) |
| 322 | 0x142 | Funda Umkhawulokudonsa wephoyinti (float) |
| 323 | 0x143 | Funda i-Setpoint Preact (float) |
Ithebula 4-2. Imiyalo yesilawuli kude (Iyaqhubeka)
Ukushintshaniswa kwe-BYTE
QAPHELA: Bheka Imenyu Yezimbobo encwadini yenkomba.
- Inkomba ithumela futhi yamukele idatha ngefomethi ephelele.
- Ifomethi evamile ingokulandelayo kuwo wonke amanani okokufaka nokukhiphayo:
- I-BYTE Ephezulu – I-BYTE Ephansi
- Uma inkomba ye-FLDBUS/SWAP ipharamitha isethwe ukuze ithi YEBO, i-oda le-BYTE lishintshela ku-:
- I-BYTE Ephansi – I-BYTE Ephezulu
- Example: Uma isisindo esikalini sifunda ama-lbs angu-10 futhi inani elingu-2560 liboniswa ku-PLC, shintsha i-BYTES ku-PLC noma ushintshe ipharamitha ye-SWAP ibe ngu-YES.
Ifomethi Yedatha Yokufaka
- I-interface ibuyisela idatha kanye nolwazi lwesimo kweyinhloko njengamagama amane we-16-bit ephendula umyalo. Ifomethi yomyalo wokufakwayo ikhonjiswe kuThebula 4-3.
- Uhlobo lwenani lungase lusethelwe imiyalo engacacisi inombolo ephelele noma idatha yephoyinti elintantayo ngokuthumela umyalo 0x000 ukuze ucacise idatha ephelele, noma ukuthumela umyalo 0x100 ukuze ucacise idatha yephoyinti elintantayo. Uhlobo lwenani lubuyiselwa egameni lesimo (i-bit 14) lefomethi yokufaka.
KUBALULEKILE: The register values for Carrier Board (PN 153093) changed with V 1.03 as shown in Table 4-3.
|
Byte |
Bhalisa
V 1.02 and Earlier |
Bhalisa
V 1.03 and Later |
Incazelo |
| Ibhaythi 0 | 40001 | 40257 | Inombolo yomyalo |
| Ibhaythi 1 | |||
| Ibhaythi 2 | 40002 | 40258 | Isimo |
| Ibhaythi 3 | |||
| Ibhaythi 4 | 40003 | 40259 | Inani (MSW) |
| Ibhaythi 5 | |||
| Ibhaythi 6 | 40004 | 40260 | Inani (LSW) |
| Ibhaythi 7 |
Ithebula 4-3. 1280 Ifomethi Yedatha Yokufaka
- Bheka Isigaba 4.1.1 ukuze uthole amapharamitha okushintshaniswa kwe-BYTE.
Inombolo yomyalo
Igama lokuqala linanela inombolo yomyalo. Uma umyalo wehluleka noma ungaziwa, inegethivu yenombolo yomyalo ibuyiselwa ukuze ibonise iphutha.
Idatha Yesimo
Idatha yesimo senkomba ibuyiselwa egameni lesibili (Ithebula 4-4). Iqoqo liyala libuyisela isimo seqoqo esikhundleni sebhayithi ephansi (Ithebula 4-5 ekhasini le-17). Imiyalo ye-Setpoint ibuyisela isimo seqoqo ngebhayithi ephansi yegama lesimo kanye nenombolo ye-setpoint kubhayithi ephezulu.
|
IZwi 2 Bit |
Idatha Yesimo Senkomba | |
| Inani=0 | Inani=1 | |
| 00 | Iphutha ** | Alikho iphutha |
| 01 | UTare akangenanga | Kungene uTare |
| 02 | Hhayi phakathi nendawo kaziro | Isikhungo sikaziro |
| 03 | Isisindo asivumelekile | Isisindo Kulungile |
| 04 | Ukuma | Ngomnyakazo |
| 05 | Amayunithi ayisisekelo | Amanye amayunithi |
| 06 | I-Tare ayitholwanga | I-Tare itholiwe |
| 07 | Isisindo esikhulu | Isisindo sengqikithi |
| 08 |
Inombolo yesiteshi
QAPHELA: Okubalulekile okungenani kuqala. |
|
| 09 | ||
| 10 | ||
| 11 | ||
| 12 | ||
| 13 | Ayisetshenziswa | |
| 14 | Idatha ephelele | Idatha yephoyinti elintantayo |
| 15 | Isisindo esihle | Isisindo esibi |
| Lesi simo sephutha asisho ngempela ukuthi isisindo esibikwayo asivumelekile. Bheka "Isisindo asivumelekile". | ||
Ithebula 4-4. Ifomethi Yedatha Yesimo Senkomba
Amaphutha e-Bit-0
- Umyalo we-PLC uhlulekile ukusebenza
- Akukho ukucushwa okwenzekile
- Ipharamitha yesikali ingaphandle kwebanga
- Kwenzeke iphutha lokuphrinta
- Kwenzeke iphutha lokulayisha
- Kwenzeke iphutha lenkumbulo
- Iphutha lesiguquli se-analog kuya kudijithali
- Iphutha le-Tare
- Iphutha lesikali phezu kobubanzi
- Iphutha lesikali ngaphansi kobubanzi
- Iphutha lesitolo sokumisa elingabuyiseleki
- Inkomba kumodi yokumisa
|
IZwi 2 Bit |
Idatha Yesimo Somsebenzi Wenqwaba | |
| Inani=0 | Inani=1 | |
| 00 | Okokufaka kwedijithali 4 VALIWE | Okokufaka kwedijithali 4 VULIWE |
| 01 | Okokufaka kwedijithali 3 VALIWE | Okokufaka kwedijithali 3 VULIWE |
| 02 | Okokufaka kwedijithali 2 VALIWE | Okokufaka kwedijithali 2 VULIWE |
| 03 | Okokufaka kwedijithali 1 VALIWE | Okokufaka kwedijithali 1 VULIWE |
| 04 | Iqoqo alimiswanga isikhashana | Inqwaba imisiwe |
| 05 | Iqoqo alisebenzi | Iqoqo ligijima |
| 06 | Iqoqo alimiswanga | Iqoqo limisiwe |
| 07 | I-alamu IVALIWE | I-alamu VULIWE |
| 08 |
Inombolo yephoyinti |
|
| 09 | ||
| 10 | ||
| 11 | ||
| 12 | ||
| 13 | Ayisetshenziswa | |
| 14 | Idatha ephelele | Idatha yephoyinti elintantayo |
| 15 | Isisindo esihle | Isisindo esibi |
Inani
Idatha yesisindo ibuyiselwa kweyinhloko egameni lesithathu nesine lefomethi yomyalo wokufakwayo, kuye ngomyalo kanye nohlobo lwenani. Idatha yesisindo ebuyisiwe yisisindo esibonisiwe ngemva kokukhishwa komyalo, ngaphandle uma umyalo usho okuhlukile. Inani elinegethivu libuyiselwa ngefomethi yokuncoma yalokhu okubili.
Ukusetha Inani Le-Float
Ukusetha inani le-float endaweni yokusetha kudinga inani ukuthi lithunyelwe ngamavelu ezinombolo ezimbili ezihlukene. Ama-PLC amaningi anendlela yokuthatha inani elintantayo futhi alihlukanise libe amanani aphelele.
Example: Okulandelayo kufanele kuthunyelwe emazwini okukhiphayo ukuze kusethwe inani le-Setpoint #1 kuya ku-10000.
- Igama lomyalo = 304
- Igama lepharamitha = 1
- MSW = 17948
- I-LSW = 16384
Ukufunda Inani le-Float
Lapho inani lokuntanta lifundwa lizobuyiselwa ngamanani amabili aphelele amelela inani le-float. I-PLC kufanele ihlanganise amanani enombolo ye-MSW kanye ne-LSW ibuyisele kunani elintantayo.
Example: Okulandelayo kubuyiselwa emagameni okufakwayo uma isisindo esikalini singama-800.5.
- Command Word = 288
- Status word = Scale status
- MSW= 17480
- I-LSW = 8192
Izincazelo zomyalo
Buyisela Isimo Nesisindo Samanje Njenge-Integer
- Umyalo: 0, 0x000
- Ipharamitha: Inombolo yesikali
- Command 0 returns the status and gross or net scale weight (per scale configuration) of the specified scale in integer format, without changing the display. This command also causes the format-
- independent commands to return a value in the integer format.
Bonisa Isiteshi
- Umyalo: 1, 0x001
- Ipharamitha: Inombolo yesikali
- Umyalo 1 ubangela ukuthi isisindo sesikali esishiwo siboniswe futhi sibuyiselwe kumodi yaso yamanje nefomethi.
Bonisa Isisindo Esiphelele
- Umyalo: 2, 0x002
- Ipharamitha: Inombolo yesikali
- Umyalo 2 ubangela ukuthi isisindo esiphelele sesikali esishiwo siboniswe futhi sibuyiswe.
Bonisa Isisindo Esiphelele
- Umyalo: 3, 0x003
Ipharamitha: Inombolo yesikali - Umyalo 3 ubangela ukuthi isisindo sengqikithi yesikali esishiwo siboniswe futhi sibuyiswe.
- Cindezela ukhiye we-Gross/Net (Toggle Mode)
- Umyalo: 9, 0x009
Ipharamitha: Inombolo yesikali - Command 9 toggles between gross and net mode (and count mode, if enabled). If a scale number other than 0 is specified, the action will not be seen until the specified scale is displayed.
Uziro
- Umyalo: 10, 0x00A
- Umyalo 10 wenza umsebenzi othi ZERO esikalini samanje.
Bonisa i-Tare
- Umyalo: 11, 0x00B
- Ipharamitha: Inombolo yesikali
- Umyalo we-11 ubangela ukuthi kuboniswe isisindo se-tare esikalini esishiwo. Uma inombolo yesikali ngaphandle kuka-0 icacisiwe, inkomba kuqala ibangela ukuba kuboniswe isikali esishiwo. Isibonisi sibuyela kumodi yangaphambilini ngemva kokuhlola inkomba.
Faka i-Tare (Integer)
- Umyalo: 12, 0x00C
- Ipharamitha: Inombolo yesikali
- Inani: Isisindo se-tare
- Umyalo 12 ufaka ukhula lwesilinganiso esikhethiwe. Idatha ye-Tare kufanele ibe yifomethi ephelele.
- Inkomba iyaqhubeka nokubuyisela idatha yesisindo kumodi yamanje yesilinganiso esicacisiwe.
Thola i-Tare (Lingisa Ukucindezela kokhiye we-TARE)
- Umyalo: 13, 0x00D
- Ipharamitha: Inombolo yesikali
- Umyalo 13 uthola ukhula olususelwe esisindweni samanje esikalini esishiwo.
- Inkomba iyaqhubeka nokubuyisela idatha yesisindo kumodi yamanje yesilinganiso esicacisiwe.
Sula uTare
- Umyalo: 14, 0x00E
- Ipharamitha: Inombolo yesikali
- Command 14 clears the tare for the specified scale.
- Inkomba iyaqhubeka nokubuyisela idatha yesisindo kumodi yamanje yesilinganiso esicacisiwe.
Amayunithi Ayisisekelo
- Umyalo: 16, 0x010
- Ipharamitha: Inombolo yesikali
- Umyalo 16 ushintsha ifomethi yamanje yesikali esishiwo kumayunithi ayinhloko alungiselelwe leso sikali.
Amayunithi Esibili
- Umyalo: 17, 0x011
- Ipharamitha: Inombolo yesikali
- Umyalo 17 ushintsha ifomethi yamanje yesikali esishiwo kumayunithi esibili alungiselelwe leso sikali.
Amayunithi Emfundo Ephakeme
- Umyalo: 18, 0x012
- Ipharamitha: Inombolo yesikali
- Umyalo 18 ushintsha ifomethi yamanje yesikali esishiwo kumayunithi emfundo ephakeme alungiselwe leso sikali, uma sitholakala.
Cindezela ukhiye wamayunithi (Guqula amayunithi)
- Umyalo: 19, 0x013
- Ipharamitha: Inombolo yesikali
- Umyalo 19 uguqula phakathi kwamayunithi ayinhloko nawesibili esikali esishiwo.
Isicelo sokuphrinta
- Umyalo: 20, 0x014
- Ipharamitha: Inombolo yesikali
- Umyalo 20 ubangela ukuthi inkomba ikhiphe umyalo wokuphrinta wesilinganiso samanje.
Bonisa i-Accumulator
- Umyalo: 21, 0x015
- Ipharamitha: Inombolo yesikali
- Umyalo 21 ubangela inani le-accumulator yesikali esishiwo ukuthi liboniswe futhi libuyiselwe. Lo myalo usebenza kuphela uma i-accumulator yesikali esishiwo inikwe amandla.
Sula i-Accumulator
- Umyalo: 22, 0x016
- Ipharamitha: Inombolo yesikali
- Umyalo 22 usula inani le-accumulator yesilinganiso esishiwo.
- Lo myalo usebenza kuphela uma i-accumulator yesikali esishiwo inikwe amandla.
Phusha Isisindo ku-Accumulator
- Umyalo: 23, 0x017
- Ipharamitha: Inombolo yesikali
- Command 23 adds the net weight on the specified scale to the value of the accumulator for the specified scale. The scale must return to net zero between accumulations.
- The indicator returns the accumulated weight data for the specified scale.
- Lo myalo usebenza kuphela uma i-accumulator yesikali esishiwo inikwe amandla.
Buyisela I-Gross As Integer
- Umyalo: 32, 0x020
- Ipharamitha: Inombolo yesikali
- Umyalo 32 ubuyisela inani lesisindo esiphelele sesikali esishiwo njengenombolo ephelele.
Buyisela i-Net njengenani eliphelele
- Umyalo: 33, 0x021
- Ipharamitha: Inombolo yesikali
- Umyalo 33 ubuyisela inani lesisindo sengqikithi yesikali esishiwo njengenombolo ephelele.
Buyisa i-Tare njenge-Integer
- Umyalo: 34, 0x022
- Ipharamitha: Inombolo yesikali
- Umyalo 34 ubuyisela inani lesisindo se-tare sesikali esishiwo njengenombolo ephelele.
Buyisela Isibonisi Samanje Njengenombolo Ephelele
- Umyalo: 37, 0x025
- Ipharamitha: Inombolo yesikali
- Umyalo 37 ubuyisela inani lesisindo lesilinganiso esishiwo njengoba kukhonjisiwe njengamanje.
- Lokhu kungase kuhlanganise inani eliphelele, lengqikithi, i-tare, noma i-accumulator, njengoba kunikwe amandla.
Buyisela I-Accumulator Njengenombolo Ephelele
- Umyalo: 38, 0x026
- Ipharamitha: Inombolo yesikali
- Umyalo 38 ubuyisela inani le-accumulator yesilinganiso esishiwo.
- Lo myalo usebenza kuphela uma i-accumulator yesikali esishiwo inikwe amandla.
Buyisela Izinga Loshintsho Njengenani Eliphelele
- Umyalo: 39, 0x027
- Ipharamitha: Inombolo yesikali
- Umyalo 39 ubuyisela inani lamanje levelu yoshintsho lwesilinganiso esishiwo.
- Lo myalo usebenza kuphela kwabangu-1280.
Setha i-Batching State
- Umyalo: 95, 0x05F
- Ipharamitha: Isimo (0 = icishiwe; 1 = okuzenzakalelayo; 2 = imanuwali)
- Command 95 sets the batching (BATCHNG) parameter. Indicator status is returned with the current weight for the last scale specified.
Iqoqo lokuqala
- Umyalo: 96, 0x060
- Ipharamitha: Inombolo yesikali
- I-Command 96 iqala uhlelo lwenqwaba kusukela esinyathelweni samanje ngemva kokuma, ukumisa isikhashana, noma ukusetha kabusha. Isimo seqoqo sibuyiselwa nesisindo samanje sesikali esishiwo.
Iqoqo Misa Isikhashana
- Umyalo: 97, 0x061
- Ipharamitha: Inombolo yesikali
- Umyalo 97 umisa kancane uhlelo lwenqwaba esinyathelweni samanje.
- Isimo seqoqo sibuyiselwa nesisindo samanje sesikali esishiwo.
Setha kabusha iqoqo
- Umyalo: 98, 0x062
- Ipharamitha: Inombolo yesikali
- U-Command 98 umisa uhlelo lwe-batch futhi ulusethe kabusha esinyathelweni sokuqala senqwaba.
- Isimo seqoqo sibuyiselwa nesisindo samanje sesikali esishiwo.
Isimo seqoqo
- Umyalo: 99, 0x063
- Ipharamitha: Inombolo yesikali
- Umyalo 99 ubuyisela isimo senqwaba. Isimo seqoqo sibuyiselwa nesisindo samanje sesikali esishiwo.
Khiya Iphaneli Yangaphambili Yenkomba
- Umyalo: 112, 0x070
- Ipharamitha: Inombolo yesikali
- Umyalo 112 ukhubaza zonke izinkinobho kuphaneli yangaphambili yenkomba.
- Isimo senkomba sibuyiselwa nesisindo samanje sesikali esishiwo.
Vula Iphaneli Yangaphambili Yesikhombi
- Umyalo: 113, 0x071
- Ipharamitha: Inombolo yesikali
- I-Command 113 inika amandla kabusha bonke okhiye kuphaneli yangaphambili yesikhombi.
- Isimo senkomba sibuyiselwa nesisindo samanje sesikali esishiwo.
Setha Okukhiphayo Kwedijithali
- Umyalo: 114, 0x072
- Ipharamitha: Inombolo yesikhala
- Inani: Inombolo encane
- Umyalo 114 usetha okukhiphayo okucacisiwe kwedijithali IVULIWE (okusebenzayo). Sebenzisa inombolo yesikhala engu-0 ukuthola imiphumela yedijithali. Isimo senkomba sibuyiselwa nesisindo samanje sesikali sokugcina esishiwo.
CISHA Okukhiphayo Kwedijithali
- Umyalo: 115, 0x073
- Ipharamitha: Inombolo yesikhala
- Inani: Inombolo encane
- U-Command 115 usetha okuphumayo kwedijithali okushiwo UKUVAMILE (akusebenzi). Sebenzisa inombolo yesikhala engu-0 ukuthola imiphumela yedijithali. Isimo senkomba sibuyiselwa nesisindo samanje sesikali sokugcina esishiwo.
Funda i-Digital I/O
- Umyalo: 116, 0x074
- Ipharamitha: Inombolo yesikhala
- Umyalo 116 ubuyisela isimo sayo yonke i-I/O yedijithali endaweni eshiwo ngamagama 3 no-4. Sebenzisa inombolo yesikhala u-0 ku-I/O ye-onboard yedijithali. Isimo senkomba sibuyiselwa endaweni yesimo ngesilinganiso sokugcina esishiwo.
Nika amandla Isibambi Somyalo Webhasi
- Umyalo: 128, 0x80
- Ipharamitha: Akukho
- I-Command 128 inika amandla isibambi somyalo webhasi kuhlelo lomsebenzisi.
- Ngenkathi lesi sibambi sinikwe amandla, yonke eminye imiyalo ye-PLC ivaliwe.
Akukho Ukusebenza
- Umyalo: 253, 0x0FD
- Ipharamitha: Inombolo yesikali
- Umyalo 253 unikeza umyalo wokusetshenziswa phakathi kokusebenza, njengoba kudingekile, ngaphandle kokubangela inkomba ukwenza noma yisiphi isenzo. Isimo senkomba nesisindo sesikali esishiwo siyabuyiswa.
Setha kabusha inkomba
- Umyalo: 254, 0x0FE
- Ipharamitha: Akukho
- Umyalo 254 unikeza umyalo wokusetha kabusha inkomba ukude. Ayikho idatha ebuyisiwe.
- Buyisela Isimo Nesisindo Samanje Njengokuntanta
- Umyalo: 256, 0x100
- Ipharamitha: Inombolo yesikali
- Command 256 returns the status and weight of the specified scale in floating-point format, without changing the display. This command also causes the format-independent commands to return a value in
- the floating-point format. Returns current weight at a floating-point format.
Faka i-Tare njenge-Float
- Umyalo: 268, 0x10C
- Ipharamitha: Inombolo yesikali
- Inani: Isisindo se-tare
- Command 268 enters a tare for the scale selected in floating-point format. The indicator returns the tare weight as taken, or 0 for no tare.
Funda I-Gross Weight njenge-Float
- Umyalo: 288, 0x120
- Ipharamitha: Inombolo yesikali
- Umyalo 288 ubuyisela inani lesisindo esiphelele sesikali esishiwo ngefomethi yephoyinti elintantayo.
Funda Isisindo Esiphelele njenge-Float
- Umyalo: 289, 0x121
- Ipharamitha: Inombolo yesikali
- Umyalo 289 ubuyisela inani lesisindo sengqikithi yesikali esishiwo ngefomethi yephoyinti elintantayo.
Funda i-Tare njenge-Float
- Umyalo: 290, 0x122
- Ipharamitha: Inombolo yesikali
- Umyalo 290 ubuyisela inani lesisindo se-tare esikalini esishiwo ngefomethi yephoyinti elintantayo.
Funda Isibonisi Samanje Njengokuntanta
- Umyalo: 293, 0x125
- Ipharamitha: Inombolo yesikali
- Umyalo 293 ubuyisela inani lesisindo sesilinganiso esishiwo njengoba sikhonjiswe njengamanje ngefomethi yephoyinti elintantayo. Lokhu kungase kuhlanganise inani eliphelele, lengqikithi, i-tare, noma i-accumulator, njengoba kunikwe amandla. Inani lesisindo libuyiselwa kumodi esetshenziselwa ukubonisa iwijethi yesikali.
Funda i-Accumulator njenge-Float
- Umyalo: 294, 0x126
- Ipharamitha: Inombolo yesikali
- Umyalo 294 ubuyisela inani le-accumulator yesilinganiso esishiwo kufomethi yephoyinti elintantayo. Isimo seqoqo sibuyiselwa esikhundleni sesimo senkomba.
- Funda Izinga Loshintsho njenge-Float
- Umyalo: 295, 0x127
- Ipharamitha: Inombolo yesikali
- Umyalo 295 ubuyisela isilinganiso samanje senani loshintsho lwesilinganiso esishiwo ngefomethi yephoyinti elintantayo. Lo myalo usebenza kuphela kwabangu-1280.
Setha I-Setpoint Value njenge-Float
- Umyalo: 304, 0x130
- Ipharamitha: Inombolo yephoyinti
- Inani: Inani lephoyinti
- Command 304 sets the setpoint value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a setpoint value. Batch status is returned in place of the indicator status.
Setha i-Setpoint Hysteresis njenge-Float
- Umyalo: 305, 0x131
- Ipharamitha: Inombolo yephoyinti
- Inani: Inani le-Hysteresis
- Umyalo 305 usetha inani le-hysteresis lephoyinti lokusetha elishiwo ngefomethi yephoyinti elintantayo. Lo myalo usebenza kuphela lapho i-setpoint imisiwe futhi idinga inani le-hysteresis. Isimo seqoqo sibuyiselwa esikhundleni sesimo senkomba.
Setha Umkhawulokudonsa Wephoyinti njenge-Float
- Umyalo: 306, 0x132
- Ipharamitha: Inombolo yephoyinti
- Inani: Inani lomkhawulokudonsa
- U-Command 306 usetha inani lomkhawulokudonsa endaweni ebekiwe ebekiwe ngefomethi yephoyinti elintantayo. Lo myalo usebenza kuphela lapho i-setpoint imisiwe futhi idinga inani lomkhawulokudonsa. Isimo seqoqo sibuyiselwa esikhundleni sesimo senkomba.
Setha i-Setpoint Preact njenge-Float
- Umyalo: 307, 0x133
- Ipharamitha: Inombolo yephoyinti
- Inani: Inani langempela
- Command 307 sets the preact value for the specified setpoint in floating-point format.
- Lo myalo usebenza kuphela lapho i-setpoint imisiwe futhi idinga inani eliqondile. Isimo seqoqo sibuyiselwa esikhundleni sesimo senkomba.
Funda I-Setpoint Value njenge-Float
- Umyalo: 320, 0x140
- Ipharamitha: Inombolo yephoyinti
- Command 320 returns the target value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a target value. Batch status is returned in place of the indicator status.
Funda i-Setpoint Hysteresis njenge-Float
- Umyalo: 321, 0x141
- Ipharamitha: Inombolo yephoyinti
- Command 321 returns the hysteresis value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a hysteresis value. Batch status is returned in place of the indicator status.
Funda i-Setpoint Bandwidth njenge-Float
- Umyalo: 322, 0x142
- Ipharamitha: Inombolo yephoyinti
- Command 322 returns the bandwidth value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a bandwidth value. Batch status is returned in place of the indicator status.
Funda i-Setpoint Preact njenge-Float
- Umyalo: 323, 0x143
- Ipharamitha: Inombolo yephoyinti
- Command 323 returns the preact value for the specified setpoint in floating-point format. This command is valid only when the setpoint is configured and requires a preact value. Batch status is returned in place of the indicator status.
© I-Rice Lake Weighing Systems Okuqukethwe kungashintsha ngaphandle kwesaziso.
- 230 W. Coleman St. • Rice Lake, WI 54868 • USA USA: 800-472-6703 • Amazwe ngamazwe: +1-715-234-9171
Imibuzo Evame Ukubuzwa
Q: Ingabe i-Modbus TCP Interface ingasetshenziswa nanoma iyiphi i-PLC noma isilawuli esiyinhloko?
A: Yes, the Modbus TCP Interface can be used with most PLCs or primary controllers that support the Modbus communication protocol.
Q: Ingabe kuyadingeka ukusebenzisa i-NEMA Type 4X ebiyelwe yensimbi engagqwali yenkomba?
A: It is recommended to use a NEMA Type 4X stainless steel enclosure, especially in washdown environments, to ensure the longevity and protection of the indicator and the Modbus TCP Interface.
Amadokhumenti / Izinsiza
 |
I-RICE LAKE 1280 Inkomba Yesisindo Esihlelekayo kanye Nomlawuli [pdf] Umhlahlandlela wokufaka 156782, 1280 Indicator Programmable Weight Indicator and Controller, Indicator Programmable Weight Indicator and Controller, Programmable Weight Indicator and Controller, Weight Indicator and Controller, Indicator and Controller, Controller |