PRO DG SYSTEMS GTA 2X12 2-way Self Powered Line Array System

Izinkomba Zokuphepha

Sicela uyifunde ngaphambi kokusebenzisa isistimu futhi uyigcine ukuze usebenzise kamuva i-PRO DG SYSTEMS® IKUBONGA NGOKUTHOLA LO UHLELO LOMSINDO OWUNGCWELE OLUKLANYWE NGOKUGCWELE. EKHIQIWE FUTHI YENZELWE E-SPAIN, KAKHULU NGENXA YASE-EUROPE FUTHI SIFISA UKUTHI UJABULELE NGEQINISO ELIPHEZULU KANYE NOKWENZA KWAKHO. Lolu hlelo luklanywe, lwakhiwe futhi lwathuthukiswa yi-Pro DG Systems® ngokuhleleka okuphelele kokusebenza. Ukugcina lesi simo nokuqinisekisa ukusebenza okulungile, umsebenzisi kufanele ahloniphe izinkomba ezilandelayo kanye nezeluleko zaleli bhukwana.

UBUKHONO, UKUPHEPHA KANYE NOKUSEBENZA KOKUSEBENZA KOHLELO KUPHELA FUTHI KUQINISEKISE KAPHELA YI-PRO DG SYSTEMS UMA:

• Ukuhlanganisa, ukukhohlisa, ukulungisa kabusha kanye nokulungiswa noma ukulungiswa kwenziwa yi-Pro DG Systems.
• Ukufakwa kukagesi kuhambisana nezidingo ze-IC (ANSI).
• Isistimu isetshenziswa ngokuya ngezinkomba zokusetshenziswa.

ISEXWAYISO:

• Uma izivikeli zivuliwe noma izingxenye ze-chassis zisusiwe, ngaphandle kwalapho lokhu kungenziwa khona mathupha, izingxenye ezibukhoma zingadalulwa.
• Noma yikuphi ukulungisa, ukukhohlisa, ukuthuthukiswa noma ukulungiswa kabusha kwesistimu kufanele kwenziwe kuphela futhi ngokukhethekileyo yi-Pro DG Systems. I-PRO DG SYSTEMS AYINAMANDLA NGANOMA YIKUPHI UKULIMALA KOHLELO OKUBANGWE UKUKHOHLISA, UKULUNGISWA, UKWENZA KAKHULU NOMA UKUBUYEKEZWA OKUBONAKALA OKUNGAGUNYAZIWE UMUNTU WOMUNTU WE-PRO DG SYSTEMS.
• Amazinga aphezulu wesipikha angabangela ukulimala kwezindlebe, kufanele agweme ukuthintana ngokuqondile nezikhulisa-zwi ezisebenza emazingeni aphezulu, ngaphandle kwalokho kufanele asebenzise izivikeli zokuzwa.

UKUXHUMANA OKUNQANDA:

• Isistimu yakhelwe ukusebenza ngokuqhubekayo.
• Isethi yokusebenza voltage kumele ihambisane nevolumu yasendaweni kamasipala omkhulutage.
• Amayunithi kufanele axhunywe kumapayipi amakhulu ngeyunithi yamandla ahlinzekiwe noma ikhebula lamandla.
• Iyunithi yamandla ayilokothi isebenzise umthofu wokuxhumana owonakele. Noma yiluphi uhlobo lomonakalo kufanele lulungiswe.
• Gwema ukuxhuma ekuphakeleni kwamapayipi amakhulu kumabhokisi abasabalalisi kanye nabanye abasebenzisi bamandla abambalwa.
• Isokhethi yepulaki yokuphakelwa kwamandla kufanele ibekwe eduze kweyunithi futhi kufanele ifinyeleleke kalula.

INDAWO ISIMO:

• Isistimu kufanele ime kuphela endaweni ehlanzekile futhi evundlile ngokuphelele.
• Uhlelo akumele luvezwe kunoma yiluphi uhlobo lokudlidliza phakathi nokusebenza kwalo.
• Gwema ukuthintana namanzi noma izindawo ezimanzi. Ungabeki izinto eziqukethe uketshezi ohlelweni.
• Thola ukuthi isistimu inomoya owanele futhi ungavimbi noma uvale noma yikuphi ukuvuleka kokukhipha umoya. Ukuvimbela ukungena komoya kungabangela ukushisa ngokweqile ohlelweni.
• Gwema ukuchayeka okuqondile nelanga kanye nokuba seduze nemithombo yokushisa noma imisebe.
• Uma isistimu iba noshintsho oludlulele kuzinga lokushisa kungase kuthinte ukusebenza kwayo, ngaphambi kokuqala isistimu yethemba ukuthi isifinyelele izinga lokushisa legumbi

IZISEKELO:

• Ungabeki isistimu kusisekelo esingaqinile esingadala umonakalo kubantu noma ohlelweni, sisebenzise kuphela netroli, irack, i-tripod noma isisekelo esinconyiwe noma esihlinzekwe yi-Pro DG Systems ngokulandela izinkomba zokufaka. Inhlanganisela yesistimu kufanele ihanjiswe ngokucophelela okukhulu. Ukusetshenziswa kokusetshenziswa kwamandla ngokweqile kanye nephansi elingalingani kungabangela inhlanganisela yesistimu futhi ime ukuthi iqhubeke.
• Imishini eyengeziwe: ungasebenzisi okokusebenza okwengeziwe okunganconywanga yi-Pro DG Systems. Ukusetshenziswa kwemishini enganconywa kungabangela izingozi nokulimala ohlelweni.
• Ukuze kuvikelwe isistimu ngesikhathi sezulu esibi noma lapho ishiywe ingagadiwe isikhathi eside, ipulaki eyinhloko kufanele inqanyulwe. Lokhu kuvimbela isistimu ukuthi ilinyazwe umbani kanye nokunyuka kwamandla ekuphakeleni kwamapayipi e-AC.

KUNCONYISWA KUMSEBENZISI AFUNDE LE MYALELO NGAPHAMBI KOKUSEBENZISA UHLELO FUTHI AGCINE UKUZE USEMUSHE KAMVA IZIHLELO ZOKUSEBENZISA UHLELO LOKUSETSHENZISWA KOKUNGAMELELE KWABASEBENZI ABANGAGUNYAZWE NGAPHANDLE KOLWAZI OLWEnele LOKUSEBENZISA UHLELO LWEMIKHIQIZO. IKHOMBISELWE OCHWEPHESHE ABAGUNYAZIWE OKUMELE BABE NOLWAZI OLWEnele LOKUSETSHENZISWA KOHLELO FUTHI NJALO BEHLONIPHA IZIKHOMBISO EZIKHOMBISWA NGEZANSI.

ISINGENISO

Le manuwali yakhelwe ukusiza abasebenzisi besistimu ye-GTA 2X12 LA kusukela ku-Pro DG Systems, ukuze isetshenziswe ngendlela efanele futhi iqonde izinzuzo nokuhlukahluka okufanayo. I-GTA 2X12 LA iwuhlelo lomugqa oluklanywe ngokuphelele, lwakhiqizwa futhi lwathuthukiswa e-Europe (e-Spain), ngokukhethekile ngezingxenye zase-Europe ezingcono kakhulu ezingu-100% ezidizayinelwe-zakhiwe kahle e-Europe (eSpain) kuphela futhi ngokukhethekile nezingxenye zase-Europe.

DESCRIPTION

Isistimu yomugqa ozishintshayo wezindlela ezi-3, ifakwe izipikha ezimbili (2) ze-12″ nezipikha ezimbili (2) ezingu-6,5″ endaweni ebiyelwe yokushuna. Isigaba se-HF sinezishayeli zokucindezela ezintathu (3) ze-1″ ezihlanganiswe nomhlahlandlela wamagagasi. Ukucushwa kwe-transducer kukhiqiza ukuhlakazeka kwe-symmetric nokuvundlile okungu-80° ngaphandle kwama-lobe esibili phezu kwebanga lemvamisa. Ifaneleka njenge-PA eyinhloko, i-Frontfill, i-Sidefill kanye ne-Downfill emicimbini yangaphandle noma ukufakwa unomphela.

IMICIMBI

• Ukuphatha Amandla: 1900 W RMS (EIA 426A standard) 3800 W uhlelo/ 7600 W ukuphakama.
• Ukuzimela okuzisholo: Phansi 8 Ohm/ Mid 8 Ohm/ Phezulu 12 Ohm.
• Ukuzwela Okumaphakathi: 101 dB/ 2.83 V/1 m (isilinganiso esingu-100 – 18000 Hz i-wideband).
• Kubalwe Maximum SPL: / 1m 131 dB okuqhubekayo / 134 dB uhlelo / 137 dB ukuphakama (iyunithi eyodwa) / 134 dB okuqhubekayo/ 137 dB Uhlelo/ 140 dB ukuphakama (amayunithi amane).
• I-Frequency Range: +/ – 3 dB ukusuka ku-50 Hz ukuya ku-19 KHz.
• Ukuqondisa Okuncane: 80° wokumbozwa okuvundlile, ukumbozwa okuqondile kuye ngobude nokucushwa kwamalungu afanayo.
• Umshayeli Omkhulu Osezingeni eliphansi: izipikha ezimbili ze-Beyma (12″), 8 Ohm, 600 W, 330,2 mm (3″) ezinekhoyili yezwi lokushisa eliphezulu kufibre yengilazi ngaphambili.
• I-Subwoofer Partner Cut-off: kuhambisane nesistimu ye-subwoofer (IT 218 F-2000, GT 218 B noma GT 221 B); 25 Hz Butterworth 24 isihlungi – 90 Hz Linkwitz-riley 24 isihlungi.
• I-Low Frequency Cut-off: Ngaphandle kwe-subwoofer: isihlungi esingu-60 Hz Linkwitz-riley 24 – 250 Hz Linkwitz-riley 24 isihlungi. Ngesistimu ye-subwoofer (IT 218 F-2000, GT 218 B noma GT 221 B): 90 Hz Linkwitzriley 24 isihlungi – 250 Hz Linkwitz-riley 24 isihlungi
• I-Mid Frequency Driver: izipikha ezimbili ze-Beyma (6,5″), 8 Ohm, 250 W, 165 mm (2″) ezinekhoyili yezwi lokushisa eliphezulu kufibre yengilazi ngaphambili
• I-Mid Frequency Cut-off: Isihlungi esingu-250 Hz Linkwitz-riley 24 – 1200 Hz Linkwitz-riley 24 isihlungi
• Umshayeli wefrikhwensi ephezulu: abathathu (3) abashayeli be-Beyma abangu-1″, 8 Ohm, 60 W, 25mm ukuphuma (44.4mm) ngekhoyili yezwi ye-diaphragm
• I-High Frequency Cut-off: Isihlungi esingu-1200 Hz Linkwitz-riley 24 – 18000 Linkwitz-riley 24 isihlungi.
• Kunconyiwe Ampokokuphila: I-Pro DG Systems GT 4.0 kuKhabhinethi.
• Izixhumi: 2 X XLR + 1 NL8MP isixhumi sesipikha. I-USS-Ethernet + 2 X Powercom
• Ibhokisi le-Acoustic: Imodeli ye-CNC ene-15 ne-18mm eyenziwe ngokhuni lwe-birch olubekwe ngaphandle
• Qeda: Umsebenzi ojwayelekile wokupenda omnyama.
• Ibhokisi Ubukhulu: (HxWxD); 370x1070x445mm (14,57″x42, 13″x17,52″).
• Isisindo: 67,5 Kg (148,81 lbs) isisindo senethi/ 68,6 Kg (151,24 lbs) isisindo esiphelele ngokupakishwa.

IMINININGWANE YEZOBUKHIWO

NGAPHAKATHI GTA 2X12 LA

Ngaphakathi kwe-GTA 2X12 LA ihlanganiswe izikhulumi ezimbili (2) zeBeyma ezingu-12 ” 600 W RMS. Idizayinelwe ngokukhethekile ngaphansi kwemingcele yethu ukuze isebenze kahle kakhulu isistimu.

IZICI EZIYINHLOKO 

• Ukuphatha amandla aphezulu (600 W RMS).
• 3″ (77 mm) ikhoyili yezwi yethusi ene-apical yangaphambili.
• Ubude obungcono bokusonta bokwandisa uhambo lomugqa.
• Impendulo enwetshiwe ebangeni lefrikhwensi emaphakathi.
• Idizayinelwe izinhlelo zokusebenza ze-woofer zamandla aphezulu.

INKCAZELO YOBUCHWEPHESHE/IZIKHISHI 

• Ububanzi obujwayelekile 300 mm 8 in
• I-impedance elinganiselwe 8
• I-impedance encane 7,7
• Umthamo wamandla 600W RMS
• Amandla ohlelo 1200W
• Ukuzwela 97 dB 2,83v@ 1m@ 2n
• Ibanga lemvamisa 35 - 4.000 Hz
• Ncoma. isivalo vol. 30/ 100 I 1,06/ 3,53f t3
• Ububanzi bekhoyili yezwi 77 mm 3 in
• Isisindo somhlangano kaMazibuthe 4,9 kg 10,8 lb
• I-Bl factor 15,1 N/A
• Isisindo esinyakazayo 0,059 kg
• Ubude bekhoyili yezwi buyi-17,5 mm
• Ukuphakama kwegebe lomoya 7mm
• I-Xdamage (ukuphakama ukuya phezulu) 30mm

THIELE-SMALL PARAMETERS*

• Imvamisa ye-resonant, f5 43 Hz
• Ukumelana nekhoyili yezwi ye-DC, Re 6,2 n
• I-Mechanical Quality Factor, i-Oms 12,43
• Isici Sekhwalithi Kagesi, Q85 0,45
• Ingqikithi Yesici Sekhwalithi, Ots 0,44
• IVolumu Yomoya Elinganayo ukuya kuma-Cms, V 35 94,241
• Ukuthobela Komshini, Cms 223 lm / N
• Ukumelana Nemishini, Rms 1,32 kg/s
• Ukusebenza kahle, 'lo 0,055 m2
• Indawo Esebenza Phansi Esebenzayo, Sd 0,055 m2
• Ukukhishwa Okuphezulu, Xmax ** 7,25 mm
• Ivolumu yokufuduka, i-V d 300 cm3
• I-Voice Coil Inductance, Le @ 1 kHz 1,7 mH

Idizayinelwe ngokukhethekile ngaphansi kwemingcele yethu ukuze isebenze kahle kakhulu isistimu

ULWAZI LOKUKHULISA

• Ububanzi bebonke 312 mm 12,3 in
• Ububanzi besiyingi se-Bolt 294,5 mm 11,6 in

Ububanzi be-Baffle cutout

• Intaba yangaphambili 277,5 mm 10,9 in
• Intaba yangemuva 280mm 11 in
• Ukujula 138 mm 5,43 in
• Ivolumu isuswe umshayeli 4,51 0,16 ft3
• Isisindo sengqikithi 5,65 kg 12,45 lb

Amapharamitha we-TS akalwa ngemva kwesikhathi sokuzivivinya kusetshenziswa ukuhlolwa kwamandla okufaka kuqala Izilinganiso zenziwa nge-velocity.current laser transducer futhi zizobonisa amapharamitha esikhathi eside (lapho isipikha sisebenza isikhathi esifushane). I-X max ibalwa ngokuthi; (Lvc-Hag)/ 2 +(Hag/ 3,5), i-wtiere Lvc, ubude bezwi ccil futhi uHag uyigebe lomoya lesishiyagalombili

Ngaphakathi kwe-GTA 2X12 LA ihlanganiswe izikhulumi ezimbili ze-Beyma ezingu-6,5 ″, 250 W RMS. Idizayinelwe ngokukhethekile ngaphansi kwemingcele yethu ukuze isebenze kahle kakhulu isistimu.

IZICI EZIYINHLOKO 

• 250 W RMS ukuphatha amandla
• Ukuzwela: 93dB@2.83v
• 2 kukhoyili yezwi ye-Aluminium.
• Izinto zokuvikela amanzi
• Isekhethi yokuhambisa umoya ephoqelelwe yokucindezelwa kwamandla aphansi.
• Ukuthutha okulawulwayo okunwetshiwe: I-Xmax ± 5.5 mm
• Umshayeli wefrikhwensi ephansi yangempela

IMICIMBI YOBUCHWEPHESHE 

• Ubukhulu obujwayelekile buyi-165 mm. 6.5 in.
• I-impedance elinganiselwe 8 ohms
• I-impedance encane 5.8 ohms
• Umthamo wamandla 250W RMS
• Amandla ohlelo 500W
• Ukuzwela 93 dB 2.83v@ 1m@ 21t
• Ibanga lemvamisa 60-9000 Hz
• Ncoma. isivalo vol. 10 / 40 I 0.35 / 1.4 ft.3
• Ububanzi bekhoyili yezwi 51.7 mm. 2 phakathi.
• Isisindo somhlangano weMagnetic 1.6 kg. 3.52 lb.
• I-BL factor 10.5N/A
• Isisindo esinyakazayo 0.017 kg.
• Ubude bekhoyili yezwi buyi-14 mm
• Ukuphakama kwegebe lomoya 7 mm
• Umonakalo we-X (ukuphakama kuya phezulu) 20 mm

THIELE-SMALL PARAMETERS*

• Imvamisa ye-resonant, fs 56 Hz
• Ukumelana nekhoyili yezwi le-DC, Re 5.3 ohms
• I-Mechanical Quality Factor, Qms 3.69
• Isici Sekhwalithi Kagesi, Qes 0.32
• Ingqikithi Yesici Sekhwalithi, Qts 0.29
• IVolumu Yomoya Elingana ne-Cms, Vas 11.91
• Ukuthobela Komshini, Cms 468 μm/N
• Ukumelana Nemishini, Rms 1.6 kg/s
• Ukusebenza kahle, i-TIO (%) 0.65
• Indawo Esebenzayo Yokuphezulu, Sd (m2) 0.0135 m2
• Ukukhishwa Okuphezulu, i-Xmax 5.5 mm
• Ivolumu yokufuduka, Vd 74.25 cm3
• I-Voice Coil Inductance, Le@ 1 kH 0.6 mH

Idizayinelwe ngokukhethekile imingcele yethu ukuze isebenze kahle kakhulu isistimu

ULWAZI LOKUKHULISA

• Ububanzi bebonke 162.5 mm. 6.40 ku.
• Ububanzi bendilinga ye-Bolt 121.62 mm. 4.79 in.

Ububanzi bokusika okusikiwe:

• Ukuphakama kwangaphambili 145.3 mm. 5.72 in.
• Intaba yangemuva 145.3 mm. 5.72 in.
• Ukujula 78 mm. 3.0 in.
• Ivolumu isuswe umshayeli 0.551 0.02 ft.3
• Isisindo esiphelele 1.9 kg. 4.18 lb.

Amapharamitha we-T- S akalwa ashintsha isikhathi sokuzivivinya kusetshenziswa ukuhlolwa kwamandla we-preconditioning. I-X max ibalwa ngokuthi; (Lvc-Hag)/2 + (Hag/3,5) lapho i-Lvc ingubude bekhoyili yezwi kanti uHag uyigebe lomoya lesishiyagalombili.

I-GTA 2X12 LA iphinde yakhiwe uphondo olulodwa oluqondisayo oluklanyelwe ngokukhethekile ukusebenza nezishayeli ezintathu zokucindezela ze-Pro DG Systems 60 W RMS, kuhlanganiswe ne-waveguide. Izici ezingaguquki zokuqondisa zale modeli ziqinisekisa ikhono lokumboza ububanzi obungu-80° ngokuvundlile kanye no-20° ububanzi ngokuqondile, kunoma iyiphi imvamisa ngaphakathi kwebanga lokusebenza kwayo. Ukuqinisekisa ukukhululeka kwe-resonance kwakhiwa ngokhuni nge-flat front finish ukuze kube lula ukufakwa kwe-flush.

IZICI EZIYINHLOKO 

• Idizayinelwe ukuthi isetshenziswe nezishayeli ezintathu zokucindezela ze-Pro DG Systems ze-60 W RMS ku-waveguide
• Inikeza impendulo efanayo
• Ukumbozwa okungu-80° endizeni evundlile kanye no-20° endizeni eqondile
• Ukulawula okuqondile okuqondile kubhendi yokudlula
• Ukwakhiwa kwezinkuni ngengaphambili eliyisicaba ukuze kube lula ukufakwa kwe-flush

IMICIMBI YOBUCHWEPHESHE

• Ubude be-beamwid obuvundlile 80 (+222, -462) (-6 dB, 1.2 – 16 kHz)
• I-beamwidth eqondile 20 ( +272 I -152) (-6 dB, 2 – 16 kHz)
• Isici sokuqondisa (Q} 60 (isilinganiso esingu-1.2 – 16 kHz)
• Inkomba yokuqondisa (DI} 15.5 dB (+7 dB, -8.1 dB)
• Imvamisa yokusika i-800 Hz
• Ubukhulu (WxHxD} 170x343x50(65)mm. 6.69×13.5×1 .97(2.56) in.
• Isisindo sengqikithi 0.75 kg/ 1.65 lb.
• Ukwakhiwa Kwezinkuni.

I-GTA 2X12 LA iphinde yakhiwe abashayeli abathathu be-Beyma compression be 60 W RMS, kuhlanganiswe nomhlahlandlela wamagagasi. Idizayinelwe ngokukhethekile ngaphansi kwemingcele yethu ukuze isebenze kahle kakhulu isistimu. Inhlanganisela yomshayeli wokucindezelwa wamandla aphezulu we-neodymium one-waveguide, inikeza ukuhlangana okungcono kakhulu kokusebenza okungcono kakhulu kwesistimu. Ukuxazulula inkinga enzima yokuzuza ukuhlangana okuhle phakathi kwama-transducer aphezulu aseduze. Esikhundleni sokusebenzisa amagagasi abizayo futhi ahluphayo - amadivaysi okubumba amagagasi, i-waveguide elula kodwa ephumelelayo iguqula indawo eyisiyingi yomshayeli wokucindezelwa ibe indawo engunxande, ngaphandle kokuvula i-engeli okungadingekile ukuze inikeze ukugoba okuphansi kumaza angaphambili we-acoustic, ifika ukuze igcwalise imfuneko yokugoba edingekayo ilunga elilungile lokuhlanganisa i-acoustic phakathi kwemithombo eseduze kuze kube ngu-18 KHz. Lokhu kufinyelelwa, ngobude obuncane obungaba khona bokuhlanekezela okuphansi, kodwa ngaphandle kokuba kufushane kakhulu, okungadala ukuphazamiseka okunamandla kwefrikhwensi.

IZICI EZIYINHLOKO ( IYUNITHI EYODWA) 

• 4″ x 0.5″ ophumayo ongunxande
• Isekethe kazibuthe ye-Neodymium yokusebenza kahle okuphezulu.
• Ukuhlangana kwe-acoustical okusebenzayo kufika ku-18 kHz.
• Ukuzwela kweqiniso okungu-105 dB 1 w@ 1 m (isilinganiso esingu-1-7 kHz).
• Ibanga lefrikhwensi enwetshiwe: 0.7 - 20 kHz.
• 1. 75″ ikhoyili yezwi ephethe amandla angu-60 W RMS.

ABASHAYELI BEFREQUENCY & DISTORTION CURVES 

Qaphela: impendulo yefrikhwensi ye-axis ikalwa ngamagagasi angu-2 ahlanganiswe nophondo luka-80° X 5° ekamelweni le-anechoic, 1 w@ 1 m.

I-AIR IMPEDANCE CURVE YAMAHHALA 

UKUSUKAZWA OKUVULILE 

Amanothi: ukuhlakazwa kukalwa ngamagagasi amabili ahlanganiswe nophondo luka-80° x 5° ekamelweni le-anechoic, 1w@ 2m.

Zonke izilinganiso zama-engeli zisuka eksisi (45° isho + 45°).

IMICIMBI YOBUCHWEPHESHE 

• Ubukhulu bomphimbo 20.5 mm. 0.8 ku.
• I-Impedans elinganiselwe 8 ohms.
• I-impedance encane 5.5 ohms. @ 4.5 kHz
• I-DC Resistance 5.6 ohms.
• Umthamo wamandla angu-60 W RMS ngaphezu kuka-1.5 kHz
• Amandla ohlelo 120 W ngaphezu kuka-1 .5 kHz
• Ukuzwela * 105 dB 1 w@ 1m kuhlanganiswe nophondo 802 x 52
• Ibanga lemvamisa 0.7 - 20 kHz
• I-crossover enconyiwe engu-1500 Hz noma ngaphezulu (12 dB/oct. min.)
• Ububanzi bekhoyili yezwi 44.4 mm. 1.75 phakathi.
• Isisindo somhlangano weMagnetic 0.6 kg. 1 .32 lb.
• Ukuminyana kwe-Flux 1.8 T
• I-BL factor 8N/A

ULWAZI LOKUKHULISA

• Ububanzi bebonke 80 mm. 3.15 ku.
• Ukujula 195 mm. 7.68 in.
• Ukukhweza Okune 6 mm. izimbobo ububanzi
• Isisindo sengqikithi (iyunithi eli-1) 1.1 kg. 2.42 lb.
• Isisindo somkhumbi (amayunithi ama-2) 2.6 kg. 5.72 lb.

UKUSABAKAZEKA OKUME

Amanothi: ukuhlakazwa kukalwa ngamagagasi amabili ahlanganiswe nophondo luka-80° x 5° ekamelweni le-anechoic, 1w@ 2m. Zonke izilinganiso zama-engeli zisuka eksisi (45° isho + 45°).

DIMENSION IMIDLALO

Qaphela: Ukuzwela kukalwe ngebanga elingu-1 m, ku-eksisi, nokokufaka okungu-1 w, okulinganiselwe kububanzi obungu-1-7 KHz

IZINTO ZOKWAKHA

• I-Waveguide: i-aluminium.
• I-diaphragm yomshayeli: i-polyester.
• Ikhoyili yezwi yomshayeli: i-edgewound aluminium iribhoni wire.
• Ikhoyili yezwi lomshayeli yangaphambili: kathoni.
• Umazibuthe womshayeli: i-neodymium.

I-GTA 2X12 LA AMPUKUPHILA

I-GT 4.0 iyidijithali ampI-lifier module yesizukulwane sokugcina isigaba D eneziteshi ezi-3: isiteshi esisodwa (1) esingu-2500 W / 4 Ohm sesiteshi esiphansi+ esisodwa (1) esingu-900 W / 4 Ohm sesiteshi esiphakathi + nesodwa (1) esingu-900 W / 4 Ohm ngokuphakama . Ihlanganisa iphrosesa yedijithali enokufakwayo kwe-XLR nokukhiphayo+ isixhumi se-USB ne-Ethernet. Iyakwazi ampi-lify ngokwayo kanye nenye iyunithi ye-GT 2X12 LA yokungenzi lutho kumodi yesigqila. Ukunikeza ukuguquguquka okukhulu njengoba kuvumela ukufezeka kokucushwa okuhlukene phakathi kwamasistimu, kuye ngohlobo lwesidingo noma umcimbi.

IMICIMBI YOBUCHWEPHESHE 

• Izilinganiso zamandla: (RMS@ 1% THO@ 230Vac)
• Isiteshi 1: 4 n 25oo W 8 12000 w
• Isiteshi 2: 4 n 900 W 8 1600 w
• Isiteshi 3: 4 900 W* 8 600 w
• I-Output Circuitry: UMACTM Class D – ibhendi egcwele enemoduli ye-PWM enokuhlanekezela okuphansi kakhulu
• Okukhipha Umqtage: Isiteshi 1 ochungechungeni lwe-GT: 160 Vp / 320 Vpp alayishiwe. Zonke ezinye iziteshi: 80 Vp / 160 Vpp alayishiwe
• AmpInzuzo ye-lifier: Isiteshi 1 kuchungechunge lwe-GT: 32 dB Zonke ezinye iziteshi: 26 dB
• I-Signal To Noise-Ratio: 120 dB (A-weighted, 20 Hz – 20 kHz, 8 0 load)
• THO + N (okujwayelekile): 0,05 % (20 Hz – 20 kHz, 8 0 umthwalo, 3 dB ngaphansi kwamandla alinganiselwe)
• Impendulo Yemvamisa: 20 Hz – 20 kHz ± 0, 15 dB (8 0 umthwalo, 1 dB ngezansi kwamandla alinganiselwe)
• DampIngqinamba: 900 (8 0 umthwalo, 1 kHz nangaphansi)
• Izifunda Zokuvikela: Umkhawulo wokufaka, ukuvikelwa kwesekethe emfushane, ukuvikelwa kwe-DC kokuphumayo, ngaphansi nangaphezulu kwevolumutagukuvikelwa kwe-e, ukuvikelwa kwe-fuse okuyinhloko okuhlakaniphile, amandla stage ukuvikelwa kwe-overload, ukuvikelwa kwezinga lokushisa kwama-transformer nama-heat-sink
• Ukufundwa kwe-DSP / Inethiwekhi: Vikela/ Khubaza (thulisa), izinga lokushisa le-Heatsink, Isiqeshana (sesiteshi ngasinye), Ivolumu yokuphumayotage (yesiteshi ngasinye), Okukhiphayo okwamanje (kusiteshi ngasinye), Umkhawulo we-SMPS (umkhawulo wokuphakela amandla)
• Ukunikezwa kwamandla kagesi: I-URECTM universal & regulated switch mode power supply
• I-Operation Voltage: I-Universal Mains, 85-268V (i-dual voltage Ukukhetha okuzenzakalelayo) Lawula Izinketho Zokulala Imodi (i-+7V kuphela ebukhoma), Khubaza okuphumayo (thulisa) Ukwehliswa kwezinga lokushisa VULIWE/ VALIWE Aux. Amandla e-DSP ±15 V (150 mA), + 7 V (1 A, ilethwa ugesi obekwe eceleni)
• Ubukhulu (HxWxD): I-265 x 483 x 105 mm / 10.43 x 19.02 x 4,13 in
• Isisindo: 6,9 kg/15,21 lbs

I-RIGING Hardware

I-Rigging Hardware frame ye-GTA 2X12 LA eyakhiwe ngu: olulodwa (1) uhlaka lwensimbi engasindi+ okune (4) ukukhiya + iketango elilodwa (1) lokusekela isisindo esikhulu samathani amabili (2). Ingakhuphula isamba esingu-16 GTA 2X12 LA

I-Flight Hardware ifakwe kwikhabhinethi enamabanga ahlukene we-angulation.

Imodi yesitaki yokunikezwa kokuguquguquka okukhulu nokuhlanganisa.

KUBALULEKILE: ukusetshenziswa kabi kohlaka nezingxenye kungaba isisusa sokuqhekeka okungase kubeke engozini ukuphepha kwelungu elifanayo. Ukusebenzisa uhlaka olulimele kanye nezingxenye kungaholela ekulimaleni okukhulu.

I-SOFTWARE YOKUQINISEKA KANYE NAMATHULUSI OKUHLANGANISA

Ku-Pro OG Systems siyazi ukuthi ukwenza izipikha ezisezingeni eliphezulu kuyingxenye ebalulekile yomsebenzi wethu. Bese kuba nenye ingxenye ukuthi nayo ibalulekile emsebenzini wethu ohlinzeka ngewaranti yokusebenzisa izikhulumi ngendlela efanele. Amathuluzi amahle enza umehluko ekusebenziseni kahle uhlelo. Nge-GTA 2X12 LA Prediction Software Ease Focus singaklama ukucushwa okuhlukile phakathi kwamasistimu futhi silingise ukuziphatha kwawo ezindaweni nezimo ezihlukahlukene, njengokubuka ukumbozwa, ukuvama, i-SPL nokuziphatha kwamasistimu avamile ngendlela elula nenethezekile. Kulula ukuyiphatha futhi sinikeza izifundo zokuqeqesha amakhasimende we-Pro OG Systems. Ukuze uthole ulwazi olwengeziwe thintana nesevisi yethu yezobuchwepheshe ku: info@prodgsystems.com

IZISEKELO

I-Pro DG Systems inikeza amakhasimende abo zonke izinhlobo zezinsiza zamasistimu abo. I-GTA 2X12 LA ine-F/Case yezokuthutha noma i-Dolly Board namaCover ezokuthutha, kanye nekhebuli ephelele yesistimu elungele ukusetshenziswa.

I-Flight Case yokuthutha amayunithi angu-4 e-GTA 2X12 LA anobukhulu obugcwele ukuze kufakwe i-hermetic futhi ilungele umgwaqo.

Ibhodi likadoli namakhava okuthutha amayunithi amane e-GTA 2X12 LA Yakhelwe kahle ukuthutha kunoma yiluphi uhlobo lweloli.

Yonke ikhebula yesistimu etholakalayo futhi elungele ukusebenza.

PRO DG SYSTEMS INTERNATIONAL
PI Santa Barbara. C/ Aceituneros n°7 41580 Casariche (Sevilla). Spain

• Ucingo: + 34 954 011 095
• I-imeyili: info@prodgsystems.com export@prodgsystems.com
• Web: www.prodgsystems.com

Amadokhumenti / Izinsiza

PRO DG SYSTEMS GTA 2X12 2-way Self Powered Line Array System [pdf] Imaniwali yosebenzisayo I-GTA 2X12, GTA 2X12 2-way Self Powered Line Array System, 2-way Self Powered Line Array System, Self Powered Line Array System, Powered Line Array System, Line Array System, Array System, System

Izithenjwa

• Imaniwali yosebenzisayo