PCE-CRC 10 Adhesion Tester
v1.0
Imaniwali yosebenzisayo

PCE-CRC 10 Adhesion Tester

Izincwadi zokusebenzisa ngezilimi ezahlukene

www.pce-instruments.com

Amanothi okuphepha

Sicela ufunde le manuwali ngokucophelela futhi ngokuphelele ngaphambi kokusebenzisa idivayisi okokuqala.
Idivayisi ingasetshenziswa kuphela abasebenzi abaqeqeshiwe futhi ilungiswe ngabasebenzi be-PCE Instruments. Ukulimala noma ukulimala okudalwe ukungawugcini imanuwali akufakiwe esibophweni sethu futhi akukhaviwe iwaranti yethu.

• Idivayisi kufanele isetshenziswe kuphela njengoba kuchazwe kule ncwadi yeziqondiso. Uma kusetshenziswa ngenye indlela, lokhu kungabangela izimo eziyingozi kumsebenzisi kanye nomonakalo kumitha.
• Lolu cingo kufanele lusetshenziswe kuphela nezisekeli ezivela ku-PCE Instruments noma okulinganayo.
  Uma kungenjalo, i-PCE Instruments ayinikezi noma iyiphi iwaranti noma ithathe noma yisiphi isibopho ngokukhubazeka noma umonakalo.
• Ungenzi izinguquko zokusebenza ocingweni.
• Ukungalandelwa kwamanothi okuphepha kungabangela ukulimala ocingweni nokulimala kumsebenzisi.

Asithathi icala ngamaphutha okuphrinta nanoma imaphi amanye amaphutha kuleli bhukwana.
Sikhomba ngokucacile emigomeni yethu yesiqiniseko evamile engatholakala emigomeni yethu evamile yebhizinisi.
Uma unemibuzo sicela uxhumane ne-PCE Instruments. Imininingwane yokuxhumana ingatholakala ekugcineni kwaleli bhukwana.

Inqubo yokuhlola

1. Beka i-cross-cut tester entweni yokuhlola, sebenzisa ukucindezela okuthambile bese udonsela idivayisi kuwe ngokunyakaza okulingene ukuze wenze ukusikeka okuhambisanayo ngobude obungaba cishe. 20 mm. Faka ingcindezi eyanele ukuze uqiniseke ukuthi ufinyelela ungqimba olulandelayo noma impahla yenkampani yenethiwekhi.
2. Beka ithuluzi lokusika ku-sample ku-90° ukuya ekusikeni kokuqala bese uphinda isinyathelo soku-1 ukuze udale iphethini ye-lattice enamathela (Umfanekiso 1).
3. Sebenzisa ibhulashi ukuze ususe ukungcola ku-lattice futhi uhlole ukuze uqinisekise ukuthi ukusikeka kungene yonke indlela nge-coating (Umfanekiso 2).
4. Susa futhi ulahle ukuphenduka okubili okuphelele kwe-adhesive tape. Susa ubude obengeziwe be-tape ngezinga eliqinile futhi usike ucezu cishe u-75 mm ukusuka kulobu bude.
5. Beka amajika phakathi ne-lattice futhi usebenzise i-eraser yepensela ukuze uqondise i-adhesive tape. (Isithombe 3)
6. Susa i-tape yokunamathisela ngokucophelela nge-engeli engu-180 °. (Isithombe 4)
7. Hlaziya umphumela.
8. Phinda ukuhlolwa kwezinye izindawo ezimbili.

Qaphela: Uma ungathanda ulwazi olwengeziwe ngale ndlela yokuhlola, sicela ubheke izinga elifanele (ISO/ASTM).

Ukuhlaziya

Ukunamathela kokunamathela kungahlolwa ngokuqhathanisa i-lattice yokusikeka ne-ASTM noma Amazinga Enkampani. Amazinga e-ASTM akhiqizwa kabusha kuthebula elilandelayo.

	Imiphetho yokusikeka ibushelelezi ngokuphelele; azikho izikwele ze-lattice ezihlukanisiwe.	0	5B
	Ukuhlukaniswa kwama-flakes of the coating at the intersection of the cut. Indawo enqanyuliwe engenkulu kakhulu kune-5% iyathinteka.	1	4B
	I-coating ivulekile emaphethelweni kanye/noma ezimpambanweni zokusikeka. Indawo enqanyuliwe enkulu kakhulu kune-5%, kodwa hhayi enkulu kakhulu kune-15% ethintekile.	2	3B
	I-seating ivuleke emaphethelweni okusikeka ngokwengxenye noma ngokuphelele kumaribhoni amakhulu, futhi/noma ivuleke ngokwengxenye noma ngokuphelele ezingxenyeni ezihlukene zezikwele. Indawo enqunyiwe enkulu kakhulu kune-15%, kodwa engenkulu kakhulu kune-35%. abathintekayo.	3	2B
	I-coating iye yavuleka emaphethelweni okusikeka kumaribhoni amakhulu futhi/noma ezinye izikwele zihlukene ngokwengxenye noma ngokuphelele. Indawo enqunyiwe enkulu kakhulu kunama-35%, kodwa engenkulu kakhulu kune-65%, iyathinteka.	4	1B
	Noma yiliphi izinga lokuvuleka elingakwazi ukuhlukaniswa ngisho nangokwesigaba 4 (1B).	5	0B

Oxhumana naye

Uma unemibuzo, iziphakamiso noma izinkinga zobuchwepheshe, sicela ungangabazi ukuxhumana nathi. Uzothola imininingwane yokuxhumana efanele ekugcineni kwaleli bhukwana lomsebenzisi.

Ukulahlwa

Ukuze sithobelane nomyalelo we-EU 2012/19/EU sibuyisela amadivayisi ethu. Singawasebenzisa kabusha noma sinikeze inkampani egaya kabusha elahla izisetshenziswa ngokuvumelana nomthetho.
Emazweni angaphandle kwe-EU, amabhethri namadivayisi kufanele kulahlwe ngokuvumelana nemithetho yendawo yangakini yokulahlwa kwemfucuza.
Uma unemibuzo, sicela uxhumane ne-PCE Instruments.

www.pce-instruments.com

Imininingwane yokuxhumana ye-PCE Instruments

i-United States of America
Inkampani PCE Americas Inc.
711 Commerce Way suite 8
I-Jupiter / Palm Beach
33458 fl
USA
Ucingo: +1 561-320-9162
Ifeksi: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us

Amadokhumenti / Izinsiza

I-PCE Instruments PCE-CRC 10 Adhesion Tester [pdf] Imaniwali yosebenzisayo PCE-CRC 10 Adhesion Tester, PCE-CRC 10, Adhesion Tester, Tester

Izithenjwa

• Imaniwali yosebenzisayo