I-PATCHING PANDA Ephemere User Manual

I-PATCHING PANDA Ephemere User Manual

ISINGENISO

Lesi isixhumi esibonakalayo sokuqoshwa kweziteshi ezimbili ezinesinqumo esiphezulu samasignali akho agxile kakhulu kuvolumu yokulawula ukurekhoda.tages.

Ungarekhoda kusuka kumasekhondi angu-1014 ku-172Hz kufike kumasekhondi angu-4 ngo-44.1kHz wesiginali esiteshini ngasinye, ushintshe isivinini sokudlala futhi uskene nge-CV erekhodiwe.

Kukhona ibhodwe le-attenuverter elizinikele lamasiginali wakho angenayo. Uma kungekho okunamathiselwe kokokufakayo ungasebenzisa ibhodwe lokufaka njenge-offset/cv generator futhi urekhode ukunyakaza kwebhodwe kumojula.

Kuyenzeka ulondoloze, ulayishe amasignali akho nezilungiselelo ekhadini le-SD kufikela ku-16GB wesikhala
Kunezindlela ezi-4 ezihlukene zokurekhoda ongakhetha kuzo ukuze wenze amasiginali ayinkimbinkimbi ukuze ulungiselele ukusebenza kwakho okubukhoma.

UKUFAKA

• Nqamula i-synth yakho emthonjeni wamandla
• Hlola kabili i-polarity kusukela kukhebuli yeribhoni
• Ngemva kokuxhuma isheke lemojula futhi usuxhume indlela efanele, umugqa obomvu kufanele ube ku -12V
• QAPHELA IZIPHINI EZISEMVA KWE-PCB KUFANELE

UNGATHINTI LUTHO USAMANDLA QAPHELA UMA UNGAZILANDELI IZINYATHELO EZICHAZWE PHEZU KOKULIMAZA IMODULI, ISIQINISEKISO NGEKE IKHAVWE.

IMIYALELO

• A) Okokufaka kwesignali 1
• B) Okokufaka kwesignali 2
• C) Rekhoda i-trigger yokufaka 1
• D) Rekhoda i-trigger yokufaka 2
• E) Dlala/Setha kabusha i-trigger1
• F) Dlala/Setha kabusha i-trigger2
• G) Isiteshi esiphumayo 1
• H) Isiteshi esiphumayo 2
• I) Skena okokufaka kwe-CV 1
• J) Skena okokufaka kwe-CV 2
• K) Okokufaka kwe-CV yesivinini 1
• L) Okokufaka kwe-CV yesivinini 2
• M) I-Attenuverter/Attenuate pot1
  (uma kungekho okulatshiwe diliva i-VDC)
• N) I-Attenuverter/Attenuate pot2
  (uma kungekho okulatshiwe diliva i-VDC)
• O) Ibhodwe lokulawula isivinini 1
• P) Ibhodwe lokulawula isivinini 2
• Q) Skena ibhodwe lokulawula 1
• R) Skena ibhodwe lokulawula 2
• S) Inkinobho yokurekhoda 1
• T) Inkinobho yokurekhoda 2
• U) Inkinobho yokudlala/yokusetha kabusha 1
• V) Inkinobho yokudlala/yokusetha kabusha 2
• W) Inkinobho yokumisa 1
• X) Inkinobho yokumisa 2
• Y) I-Rotatory Encoder
• Z) Khetha inkinobho
  Cindezela inkinobho yokukhetha amasekhondi angu-2 kuzoshintsha isiteshi

BUYEKEZA I-FIRMWARE V 21.51

I-Menu diving ishintshiwe ukuze uthole umuzwa ongcono. Indlela esebenzayo yokukhetha ezindleleni ezahlukene zokurekhoda, ukudlala amasignali.

Kunemithetho emi-2 okufanele ilandelwe ukuze yonke into ibe lula uma uqala ukutshuza kuzilungiselelo zemojuli yezakhiwo.

Umthetho 1 "Khetha inkinobho ngena ngaphakathi kwemenyu bese ukhetha isilungiselelo"
Umthetho 2 “Ukucindezela isifaki khodi kuphuma kumenyu, nasohlelweni lokusebenza sishintsha isibonisi se-OLED sisuke ekuboniseni isignali erekhodiwe ukuze sibonise isiginali ye-ADC ebukhoma”

Ukuze ufinyelele imenyu enkulu bamba cindezela inkinobho yokukhetha isekhondi elingu-1, zungezisa isifaki khodi ukuze upheqe kumamenyu, cindezela okuthi khetha ukuze ungene.
Ukuphuma kumenyu mane ucindezele isifaki khodi.

Kukhona imenyu entsha ebizwa ngokuthi "show in menu" ngokukhetha imenyu ohlwini, uzovumela imenyu ethize engu-1 yokufinyelela okusheshayo kuhlelo lokusebenza ngokucindezela inkinobho yokukhetha, ngale ndlela ungaba nesilungiselelo esiwusizo kakhulu esikhethelwe isignali oyikhethile. ziyasebenza ngaleso sikhathi.

Yonke isignali elondolozwe ekhadini le-SD izophinda igcine izilungiselelo ezikhethelwe leyo siginali ethile

INDLU YOKUDLALA

a) Iluphu: Ukudlala kwesiginali kuzodlala ku-loop kuze kucindezelwe okuthi STOP.
b) Ishothi eyodwa: Ukudlalwa kabusha kwesignali kuzoma uma ifika ekugcineni noma uma STOP icindezelwa.

Bamba ukucindezela inkinobho ethi PLAY amasekhondi angu-2, izingcipho zokudlala azinakwa I-LED izocwayiza, lokhu kuwusizo ku-REC Sync mult-G, phinda ukuze ukhubaze.

INDLELA YOKUDLALA

a) Phambili
b) Emuva
c) I-Pendulum

IMODI YESIVINYO

a) I-Quantized: Ijubane lokudlala lenyuke lisuka ku-/5, /4, /3, /2, x1, x2, x3,x4, x5.
b) Umugqa: Isivinini sokudlala sisuka ku-/5 siye ku-x5

Imodi ye-REC

a) Imanuwali: Ukucindezela i-REC kuzoqala ukurekhoda, ukucindezela okuthi REC futhi kuzoqeda ukurekhoda.
b) Ukuphindaphinda okwenziwa ngesandla: Ukucindezela okuthi REC kuzoqala ukurekhoda, ukucindezela okuthi REC futhi kuzoqeda ukurekhoda. (Uma i-PLAY icindezelwa phakathi nokurekhoda, noma i-trigger yamukelwe ku-PLAY inqubo yokurekhoda izomiswa, ukucindezela okuthi PLAY futhi noma ukuthola i-trigger ku-PLAY ujeke wokufaka kuzoqhubeka nokurekhoda)
c) Vumelanisa: Ukucindezela i-REC kuzolinda i-trigger esuka ku-REC icuphe okokufaka ukuze iqale ukurekhoda, lapho i-trigger yesibili yamukelwe kokokufaka kwe-REC futhi izoqeda ukurekhoda.
d) Vumelanisa ukuphindaphinda: Ukucindezela i-REC kuzolinda i-trigger esuka ku-REC trigger input iqale ukurekhoda, lapho i-trigger yesibili yamukelwe okokufaka kwe-REC futhi izoqeda ukurekhoda (Uma i-PLAY icindezelwa phakathi nokurekhoda, noma i-trigger yamukelwe kunqubo yokurekhoda ye-PLAY izoba kumiswe isikhashana, ucindezela u-PLAY futhi noma ukuthola i-trigger ukuze i-PLAY ijeke yokufaka kuzoqhubeka nokurekhoda)
e) I-Manual mult-G: Ukucindezela i-REC kuzoqala ukurekhoda, ukucindezela i-PLAY kuzomisa ukurekhoda ukusetha ukuphela kwegridi, ukucindezela okuthi REC qeda ukurekhoda.
f) Vumelanisa i-mult-G: Ukucindezela i-REC kuzolinda i-trigger esuka ku-REC trigger input iqale ukurekhoda, lapho i-trigger yesibili yamukelwe kokokufaka kwe-REC futhi izoqeda ukurekhoda (ngenkathi irekhodwa uma izingcipho ze-PLAY zamukelwe zizosetha amagridi ekurekhodweni. inqubo)

Uma i-VCA inikwe amandla, ibhodwe lokokufaka noma isignali yokokufaka iba isilawuli sokunciphisa i-PLAYBACK SIGNAL. Kubalulekile ukuqonda i-CV RANGE ngokuhambisana nesici se-VCA, uma usebenzisa amasiginali we-0V-10V qinisekisa ukuthi iswishi ye-offset ngemuva kwe-PCB ifana ne-CV RANGE nayo, kuyasebenza okufanayo kumasignali -5V/+5V.

QUANTIZER
Ukunika amandla okokufaka kwe-Live CV/ I-CV erekhodiwe ilinganiselwe ngo-1V/oct

IZIKALI
Imenyu yekhibhodi ukuze unike amandla/ukhubaze amanothi

SAMPLINGANISO
Khetha phakathi kwama-s ahlukeneample izindlela zokukala kanye nobude besikhathi sokuqopha

Ibanga le-CV
Shintsha i-offset yesiginali engenayo isuka ku--5/+5V noma i-0/10V, ingaphinde iguqule ukususwa kwesiginali yokudlala.

FILE

File Layisha: Ilayisha amasignali alondolozwe ekhadini le-SD
File Sula: Isula amasignali alondolozwe ekhadini le-SD
File Londoloza: Igcina futhi isho amasignali ekhadini le-SD

BONISA KUMENU
Ngokukhetha imenyu ohlwini, uzovumela imenyu ethize engu-1 yokufinyelela okusheshayo kuhlelo lokusebenza ngokucindezela inkinobho ethi khetha, ngale ndlela ungaba nesilungiselelo esiwusizo kakhulu esikhethelwe isiginali osebenza kuyo ngaleso sikhathi.

UKULINGANISWA
Ngena ekulinganiseni imenyu ye-ADC/DAC

KHETHA I-GRID AXIS
Uma i-REC MODE MANUAL MULT G ikhethwa ngale nketho ungakwazi futhi ukulungisa isiphetho segridi

UKULINGANISWA

Ngaphambi kokuthi uqale ukulinganisa:
Xhuma i-CV isuke kusilandeli sakho iye ku-Ephemere input, okukhiphayo kusuka e-Ephemere kuya ku-VCO yakho, i-VCO kuyikhiphele ku-DAW yakho, ku-
I-DAW vula ishuna ye-VST ukuze uqaphe amanothi. I-Ephemere input pot's at MAX.

a) Ngena ngaphakathi kwemenyu yokulinganisa, qala inqubo yokulinganisa.
b) Imenyu 0.0V, thumela u-C0 usuka ku-sequencuer yakho, i-DAW ayikwazi ukufinyelela ku-C0 wena umane uzungezisa isishumeki ukuze sifanise ivelu ye-DAC nevelu ye-ADC. Cindezela isikhathi esingu-1 kuphela ukuze uye esinyathelweni esilandelayo.
c) I-Menu 1V, thumela i-C1 ku-sequencer yakho, zungezisa isishumeki ngenkathi uqapha i-DAW yakho ukuze ufinyelele ku-C1

Ukucindezela inkinobho ethi KHETHA kanye nje kuzobhalisa inani, kuzogxumela kuvolumu elandelayotage isethaphu. Qiniseka ukuthi awucindezeli uze uthumele ivolumu oyifunayotage ukuze ubhalise, ungacindezeli izikhathi ezi-2 ngaphandle kwalokho uzodinga ukuqala futhi.

c) I-Menu 2V, thumela i-C2 ku-sequencer yakho, zungezisa isishumeki ngenkathi uqapha i-DAW yakho ukuze ufinyelele ku-C2

d) Phinda inqubo efanayo ngaphandle kwe-10V, ngoba i-DAW ayikwazi ukufinyelela ku-C10 uzodinga ukufanisa amanani we-ADC ne-DAC.
e) Londoloza ukulinganisa, phuma ngokucindezela isifaki khodi, qalisa kabusha imojuli
f) Hlola ukuthi ukulinganisa kulungile, qiniseka ukuthi uhla lwe-CV lusethelwe ku-0-10V futhi i-quantizer ivuliwe.