offgridtec 30m I-Protective Grid Instruction Manual

I-offgridtec 30m Igridi Yokuvikela

Imininingwane:

• Igama Lomkhiqizo: I-Offgridtec Protective Grid 30m
• Okuqukethwe:
  • 1 roll solar panel mesh (30 amamitha)
  • Amayunithi ayi-100 e-J-hook (insimbi engagqwali)
  • Amayunithi ayi-100 e-Speed ​​Washer (Insimbi engagqwali)

Imiyalo yokusetshenziswa komkhiqizo

I-Solar Panel Mesh Ukufakwa Kohlangothi Oluqondile:

1. Linganisa ubude bephaneli yelanga nge-tape measure.
2. Sika i-solar panel mesh ngokobude bephaneli nge-wire cutter.
3. Qhathanisa ukuphakama kwephaneli yelanga kanye ne-solar panel mesh.
4. Songa ukuphakama okwengeziwe kwe-solar panel mesh nge-engeli engama-degree angama-45 ngenduku yokhuni eyisikwele.
5. Faka uhlangothi lwehhuku lwe-J-hook phakathi kwe-mesh, bese uyixhume kuhlaka lwephaneli.
6. Gcoba iwasha isivinini ngentonga ye-J-Hook, bese uyiqinisa ngokumelene nemeshi.
7. Gobela induku ye-J-hook phezulu ngezandla.
8. Sika ingxenye eyengeziwe yenduku ye-J-hook ngamapulangwe.
9. Engeza i-J-hook kanye newasha yesivinini evikelekile ukuze ulungise amameshi agqagqene ngokuya ngezinyathelo 5-8.

Ukufakwa Kwekhona Langaphandle Le-Solar Panel Mesh:

1. Linganisa ukuze unqume lapho ukugoba kuzohamba khona nge-tape measure.
2. Sika inetha ngomkeko oqondile eduze kophahla engxenyeni esekhoneni ngesisiki socingo.
3. Gobisa inetha nge-slit nge-engeli engu-90 degree bese uyibeka ekhoneni.
4. Bopha i-mesh yekhona langaphandle kanye nephaneli yelanga ngama-J-hook namawasha esivinini.
5. Bopha inetha lephaneli yelanga elincane kanye nenetha lephaneli yelanga ekhoneni endaweni ngezibopho ezikhona.
6. Sika ingxenye eyeqile yezibopho ze-zip kumameshi ephaneli yelanga ngesisiki socingo.

Ukufakwa Kwekhona Langaphakathi Le-Solar Mesh:

1. Qondanisa i-mesh nekhona lephaneli yelanga ukuze unqume indawo yekhona langaphakathi le-mesh.
2. Sika i-45-degree slit ngaphansi kwe-solar panel mesh nge-pliers.
3. Goba iziphetho ezimbili ze-mesh ngezindlela ezihlukile ukuze udlule iziphetho ezisikiwe.
4. Vikela amaphethelo womabili ekhoneni elingaphakathi lepaneli yephaneli enezikhala ngama-J-hook namawasha esivinini.
5. Khiya umsele ongezansi ngothayi we-zip. Bese usika ingxenye eyengeziwe nge-wire cutter.

FAQ:

• Umbuzo: Ngingaphinda ngisebenzise ama-J-hook namawasha esivinini?
  A: Kunconywa ukusebenzisa ama-J-hook amasha namawasha esivinini ekufakweni ngakunye ukuze kuqinisekiswe ukusebenza okufanele nokuphepha.

I-Offgridtec Protective Grid 30m

Okuqukethwe

• I-1 roll solar panel mesh (30mts)
• Amayunithi ayi-100 e-J-hook (insimbi engagqwali)
• Amayunithi ayi-100 e-Speed ​​Washer (Insimbi engagqwali)

Indlela yokufaka (uma kufakwa eceleni)

• Linganisa ubude bephaneli yelanga nge-tape measure.
• Sika i-solar panel mesh ngokobude bephaneli nge-wire cutter.
• Qhathanisa ukuphakama kwephaneli yelanga kanye ne-solar panel mesh.
• Songa ukuphakama okwengeziwe kwe-solar panel mesh ku-45 degree ngenduku yokhuni eyisikwele.
• Faka uhlangothi lwehhuku lwe-J-hook phakathi kwe-mesh, bese uyixhume kuhlaka lwephaneli
• Gcoba iwasha isivinini ngentonga ye-J-Hook, bese uyiqinisa ngokumelene nemeshi.
• Gobela induku ye-J-hook phezulu ngezandla.
• Sika ingxenye eyengeziwe yenduku ye-J-hook ngamapulangwe.
• Namathisela ama-J-hook cishe njalo ngo-12″ - 18″ (30 cm - 50 cm).
• Zinqwabelane cishe ngo-2″ – 4″ (50 mm – 100 mm) uma uqala ucezu olusha lwemeshi. Engeza i-J-hook kanye newasha yesivinini evikelekile ukuze ulungise amameshi agqagqene ngokuya ngesinyathelo 5-8.
• Engeza i-J-hook kanye newasha yesivinini evikelekile ukuze ulungise amameshi agqagqene ngokuya ngesinyathelo 5-8.
• Ukufakwa kwamaphaneli elanga aqondile kuqediwe ophahleni.

Indlela yokufaka (uma kufakwa ekhoneni langaphandle)

• Linganisa ukuze unqume lapho ukugoba kuzohamba khona nge-tape measure.
• Sika inetha ngomkeko oqondile eduze kophahla engxenyeni esekhoneni ngesisiki socingo.
• Gobisa inetha esikhaleni nge-engeli engu-90 degree bese uyibeka ekhoneni.
• Gobisa inetha esikhaleni nge-engeli engu-90 degree bese uyibeka ekhoneni.
• Sika i-mesh encane cishe engu-2″ × 4″ ukuvala igebe phakathi kwe-mesh yekhona nophahla.
• Bopha inetha lephaneli yelanga elincane kanye nenetha lephaneli yelanga ekhoneni endaweni ngezibopho ezikhona.
• Sika ingxenye eyeqile yothayi be-zip kuma-solar panel meshes ngesisiki socingo.
• Ukufakwa kwekhona langaphandle kwe-solar panel mesh kuqediwe.

Indlela yokufaka (uma kufakwa ekhoneni langaphakathi)

• Qondanisa i-mesh nekhona lephaneli yelanga ukuze unqume indawo yekhona langaphakathi le-mesh.
• Sika umkehlo ongu-45 degree ngaphansi kwe-solar panel mesh ngodlawu.
• Gobisa amaphethelo angu-2 e-mesh ezindaweni eziphambene ukuze udlule iziphetho ezisikiwe.
• Vikela amaphethelo womabili ekhoneni elingaphakathi lepaneli yephaneli enezikhala ngama-J-hook namawasha esivinini.
• Khiya umsele ongezansi ngothayi we-zip. Bese usika ingxenye eyengeziwe nge-wire cutter.
• Ukufakwa kwekhona langaphakathi le-solar panel mesh kuqediwe.