I-NOWSONIC AUTARK LED MASTER II DMX Isilawuli se-LED Lighting System

IMIYALELO EBALULEKILE YOKUPHEPHA

1. Funda le miyalo.
2. Gcina le miyalo.
3. Lalela zonke izixwayiso.
4. Landela yonke imiyalelo.
5. Ungasebenzisi lesi sisetshenziswa eduze namanzi.
6. Hlanza kuphela ngendwangu eyomile.
7. Ungavimbi noma yiziphi izimbobo zokungenisa umoya! Faka ngokuhambisana nemiyalelo yomkhiqizi.
8. Ungafaki eduze kwanoma yimiphi imithombo yokushisa njengama-radiator, amarejista okushisa, izitofu, noma ezinye izinto ezisetshenziswayo (okuhlanganisa amplifiers) ezikhiqiza ukushisa.
9. Ungayehluli injongo yokuphepha yepulaki eyenziwe nge-polarized noma ephansi. Ipulaki eyenziwe nge-polarized inama-blade amabili anelinye elibanzi kunelinye. Ipulaki yohlobo oluphansi inama-blade amabili kanye ne-prong yesithathu yaphansi. I-blade ebanzi noma i-prong yesithathu inikezwe ukuphepha kwakho. Uma ipulaki enikeziwe ingangeni endaweni yakho yokukhipha, thintana nosebenza ngogesi ukuze athathe indawo yaleso esiphelelwe yisikhathi.
10. Vikela intambo yamandla ekuhanjweni ngayo noma ekuncinzweni, ikakhulukazi kumapulaki, ezintweni ezisetshenziswayo, kanye nendawo lapho ziphuma khona ezinsizeni.
11. Sebenzisa kuphela okunamathiselwe/izinsiza ezicaciswe umenzi.
12. Sebenzisa kuphela inqola, isitendi, i-tripod, ubakaki, noma ithebula elishiwo umkhiqizi, noma elithengiswa nge-apparatus. Uma kusetshenziswa inqola, qaphela uma uhambisa inhlanganisela yekalishi/impahla ukuze ugweme ukulimala okusuka ku-tip-over.
13. Khipha lesi sisetshenziswa phakathi neziphepho zombani noma lapho singasetshenziswa isikhathi eside.
14. Thumela zonke izinsiza kubasebenzi benkonzo abaqeqeshiwe. Ukuseviswa kuyadingeka lapho umshini wokusebenza ulimele nganoma iyiphi indlela, njengentambo yokuphakela amandla noma ipulaki lonakele, uketshezi luchithekile noma izinto ziwele emshinini, umshini uhlaselwe yimvula noma umswakama, awusebenzi ngendlela evamile. , noma ulahliwe.

ISEXWAYISO

• Ukwehlisa ubungozi bokushiswa umlilo noma ugesi, musa ukubeka lezi zinsimbi emvuleni noma emswakeni.
• Ungabeki lesi sixhobo ekuconzeni noma ekuchaphazeni futhi uqinisekise ukuthi azikho izinto ezigcwele uketshezi, njengamavasi, ezibekwa emshinini.
• Le mishini kufanele ifakwe emhlabathini.
• Sebenzisa intambo yomugqa wokwenza phansi enezintambo ezintathu njengaleyo enikezwe umkhiqizo.
• Yaziswa ukuthi ivolumu yokusebenza ehlukiletagidinga ukusetshenziswa kwezinhlobo ezahlukene zentambo kanye namapulaki okunamathiselwe.
• Njalo gcina imithetho yezokuphepha yendawo.
• Lo mshini kufanele ufakwe eduze kwe-socket outlet futhi ukunqanyulwa kocingo kufanele kufinyeleleke kalula.
• Ukuze unqamule ngokuphelele lesi sisetshenziswa ku-AC Mains, nqamula ipulaki yentambo yokuphakela amandla esitokisini se-AC. dd Sicela ulandele yonke imiyalelo yomkhiqizi ukuze uyifake. dd Ungafaki endaweni evalekile.
• Ungayivuli iyunithi - ingozi yokushaqeka ngogesi.

ISEXWAYISO!
Sicela uqaphele: Izinguquko noma ukuguqulwa ocingweni okungagunyazwanga ngokucacile kule manuwali kungase kuqede igunya lakho lokusebenzisa ithuluzi.

Ukusevisa

• Azikho izingxenye ezisebenzisekayo ngaphakathi.
• Yonke imisebenzi kufanele yenziwe ngabasebenzi abaqeqeshiwe.

ISEXWAYISO: UKUZE USEHLISE UBUNGOZI BOKUSHAQEKA KWE-ELEC TRIC, UNGASUSI IKHAVA. AKUKHO IZINXENYE EZINGAPHAKATHI KOMSEBENZISI NGAPHAKATHI. BHEKISELA I-SERVING KUBANTU ABAQINISEKILE KUPHELA.

Umlotha wombani onophawu lomcibisholo ngaphakathi kukanxantathu olinganayo wenzelwe ukwazisa umsebenzisi ngobukhona be- “vol eyingozi” engavinjelwangatage” ngaphakathi kwendawo ebiyelwe yomkhiqizo engaba ubukhulu obanele ukuze idale ingozi yokushaqeka kukagesi kubantu.

Iphuzu lesibabazo phakathi kukanxantathu olinganayo lihloselwe ukwazisa umsebenzisi ngokuba khona kweziyalezo ezibalulekile zokusebenza nokugcinwa (ukunikeza isevisi) ezincwadini ezihambisana nomkhiqizo.

Isingeniso

Siyabonga kakhulu ngokuthenga i-Nowsonic Autark LED Master II! I-Nowsonic Autark LED Master II iyisilawuli se-DMX esicwebezele kakhulu nesiqanjiwe sezibani ze-LED ezifana ne-Nowsonic Autark ID07 noma i-Autark OD09. Nokho, ngenxa ye-DMX 512 pro-tocol isebenzisana ngokuqondile nanoma yimiphi imikhiqizo ye-floodlight noma amathini e-PAR avela eceleni. Ungakwazi ukulungisa kalula idivayisi yezindlela eziyisithupha ezitholakalayo zamashaneli (RGB, RGBW, RGBWM, DRGB, DRGBW and DRGB) ngokucindezela inkinobho eyodwa nje. Isilawuli singakwazi ukubhekana neziteshi ezingafika ku-40 ngephrothokholi ye-DMX512. Amashaneli ombala angawodwana angalawulwa ngokusebenzisa amafader ama-compo-nents emibala ye-R, G, B kanye ne-W/D. Ungacupha imixube yombala elungiswe ngaphambilini yangaphakathi usebenzisa i-MIX fader ehlukile. I-MAC fader ivumela ukukhetha eyodwa yezinhlelo zangaphakathi eziyi-8 ezingashintshwa ngesivinini njengoba kudingeka. Izinhlelo zangaphakathi zingalawulwa ngamandla ngesignali yomculo; ukuzwela kwimodi yomsindo kungalungiswa, uma kudingeka. Imodi ye-Strobe yenziwa isebenze ngokucindezela inkinobho, isivinini se-strobe silungiswa nge-fader eyengeziwe.

Izici

• Ukudluliswa kwemilayezo yokulawula ye-DMX 512 kumadivayisi angaphandle dd 40 amashaneli esewonke akwazi ukubhekana nawo
• Izindlela zeziteshi eziyisithupha ezitholakalayo—i-RGB, i-RGBD, i-RGBW, i-RGBWD, i-DRGB ne-DRGBW
• Ama-fader amane ahlukene eziteshi ezinemibala ethi R, G, B kanye ne-W/D
• Hlukanisa ama-fader ukuze ulawule izingxube zemibala yangaphakathi
• Izinhlelo zangaphakathi eziyi-8 ezinejubane elilungisekayo
• Isici esihlukile se-Strobe ngesivinini esilungisekayo
• Ukusebenza okwakhelwe ngaphakathi noma ukusetshenziswa kweselula ngenxa yedizayini ehlangene kakhulu namandla angaphandle

Izinhlelo zokusebenza

• Isilawuli sokukhanyisa sokufakwa okuncane okungaguquki kuma-discotheques, amakilabhu noma kwezinye izindawo
• Isilawuli se-DMX sezinhlelo zokusebenza zeselula (ikakhulukazi sihlanganiswe nesidlulisi esingenantambo se-DMX)

Izitolo nezilawuli kuphaneli elingemuva
Izitolo nezilawuli ezilandelayo ziyatholakala kuphaneli ephezulu ye-Autark LED Master II:

Isokhethi ye-DMX OUT
Xhuma ikhebuli evamile ye-XLR (ayihlinzekiwe) kusokhethi ye-DMX OUT: Izikhonkwane zaleli sokhethi lesifazane le-XLR zinentambo kanje:

Izintambo

• Phina 1: umhlabathi (isihlangu)
• Phina 2: isignali ehlanekezelwe, i-DMX -
• Phina 3: isignali, DMX+
  Isiginali iphuma ngefomethi ye-DMX 512. Ngakho-ke kufanele uxhume ikhebula kokokufaka okunamandla e-DMX kudivayisi yesigqila.

QAPHELA: I-LED Master II isebenza njalo njengengcweti kunoma yikuphi ukusethwa kwe-DMX. Ngakho-ke, wonke amadivaysi e-DMX alandelayo kufanele amiswe njengamayunithi ezigqila.

DC INPUT isokhethi
Xhuma indawo yamandla odongeni efakiwe ne-DC INPUT sock-et (ipulaki e-coaxial, + = ukuthintana kwangaphakathi,- = othintana naye wangaphandle). Uma ugesi onikeziwe ungatholakali, ungasebenzisa noma iyiphi i-adaptha ye-AC inqobo nje uma ifana nezidingo (9–12V, min. 300mA).

AMANDLA switch
I-POWERswitch ivula futhi ivale i-LED Master II.

Izilawuli nezinkomba kuphaneli ephezulu
I-Autark LED Master II inikeza izilawuli ezilandelayo nezinkomba kuphaneli ephezulu:

R, G, B kanye ne-W/D faders
Ungakwazi ukusetha mathupha noma iyiphi inhlanganisela yombala yemodi yesiteshi ekhethiwe (7) usebenzisa izifanizi ze-R, G, B kanye ne-W/D: ububanzi bokulawula isiteshi sombala ngasinye sisuka ku-0 kuye ku-255, isabelo sesiteshi sisethwa ngenkinobho (6 ) ngezansi.

QAPHELA: Kumodi yesiteshi se-M1 (RGB), i-W/D fader ayinawo umthelela.

I-MIX fader
Ngefader ye-MIX ungakhetha phakathi kwezingxube zombala zangaphakathi ze-LED Master II: izingxube zemibala ziphrintwa kuphaneli ephezulu eduze kwefader.

I-MAC fader
Ngefader ye-MAC, ungakhetha phakathi kwezinhlelo eziyisi-8 zangaphakathi ze-LED Master II: Kuye ngemodi ye-RUN ekhethiwe (8), uhlelo lulawulwa ngokuzenzekelayo noma ngamandla ngomculo. Kumodi ye-AUTO (8) ungasetha isivinini sezinhlelo usebenzisa i-SPEED fader ehambisanayo (4).

I-SPEED fader
Uma ukhethe imodi ye-AUTO ngenkinobho ye-RUN MODE (8), ungakwazi ukulawula isivinini sezinhlelo zangaphakathi ze-LED Master II usebenzisa isifaniso se-SPEED. Ububanzi buyimizuzwana engu-0.1 ukuya kwangu-30.

STROBE SPEED / Ukuzwela Komsindo fader
Uma ubandakanya imodi ye-STROBE ngokucindezela inkinobho ehambisanayo (10), ungasetha isivinini/imvamisa yomphumela we-Strobe ngefader STROBE SPEED ukusuka ku-1 kuye ku-20Hz: Uma nje imodi ye-STROBE ingasebenzi, i-fader ilawula umculo. ukuzwela (lapho lesi sici senziwe sasebenza ngokucindezela Imodi ye-RUN MODE).

1–10, 11–20, 21–30 kanye nezinkinobho ezingu-31–40
Usebenzisa izinkinobho ezithi 1–10, 11–20, 21–30 kanye no-31–40 ungakhetha iqembu lesiteshi olifunayo elibe lilawulwa kusetshenziswa amafada e-R, G, B kanye ne-W/D: ngakho-ke, amashaneli angama-40 esewonke angaba. kulawulwa. Ama-LED aseduze nezinkinobho abonisa ukukhetha kwamanje.

Inkinobho ye-CHANNEL MODE
Ungakhetha imodi yesiteshi oyifunayo yamafada u-R, G, B no-W/D ngenkinobho ye-CHANNEL MODE (1): okukhethiwe kuboniswa ngama-LED ngaphezulu kwezinkinobho. Ungakhetha kulezi zindlela eziyisithupha ezilandelayo:

I-LED	Imodi yesiteshi	Incazelo yemodi
M1	I-RGB	Ishaneli 1 = ebomvu, ishaneli 2 = eluhlaza, isiteshi 3 = eluhlaza okwesibhakabhaka
M2	I-RGBD	Isiteshi 1 = esibomvu, isiteshi 2 = esiluhlaza, isiteshi 3 = eluhlaza okwesibhakabhaka, isiteshi 4 = dimmer
M3	I-RGBW	Isiteshi 1 = esibomvu, isiteshi 2 = esiluhlaza, isiteshi 3 = eluhlaza okwesibhakabhaka, isiteshi 4 = esimhlophe
M4	I-RGBWD	Isiteshi 1 = esibomvu, isiteshi 2 = esiluhlaza, isiteshi 3 = eluhlaza okwesibhakabhaka, isiteshi 4 = esimhlophe, isiteshi 5 = dimmer
M5	I-DRGB	Ishaneli 1 = dimmer, isiteshi 2 = esibomvu, isiteshi 3 = eluhlaza, isiteshi 4 = eluhlaza okwesibhakabhaka
M6	I-DRGBW	Ishaneli 1 = dimmer, isiteshi 2 = esibomvu, isiteshi 3 = eluhlaza, isiteshi 4 = eluhlaza okwesibhakabhaka, isiteshi 5 = esimhlophe

Inkinobho ye-RUN MODE
Ngokucindezela inkinobho ethi RUN MODE ungakhetha ukuthi uhlelo olukhethile ngefader ye-MAC (3) lulawulwa ngokuzenzakalelayo noma ngokuzwela komculo. Kuye ngokukhethwa, amalambu e-LED AUTO noma oMSINDO.

Inkinobho ethi BLACK OUT
Cindezela inkinobho ethi BLACK OUT ukuze usethe wonke amanani esiteshi okwesikhashana abe ngu-0: lokhu kusho ukuthi wonke amayunithi esigqila alawulwayo awasebenzi (awakhanyi) inqobo nje uma ubambe le nkinobho ucindezelwe.

Inkinobho ye-STROBE
Cindezela le nkinobho ukuze uvule imodi ye-Strobe: umphumela we-Strobe uyasebenza inqobo nje uma ucindezela inkinobho. Uma imodi ye-Strobe isebenza, ungakwazi ukulawula isivinini se-Strobe usebenzisa i-STROBE SPEED/Sensitivity fader (5) ebangeni elisuka ku-1 kuye ku-20Hz.

Ukuhlanganisa
I-LED Master II ivumela ukulawula izigqila zangaphandle ngeziteshi ezingafika ku-40. Xhuma amadivayisi kanje:

1. Usebenzisa ugesi ohlinzekiwe odongeni, xhuma i-LED Master II emandleni amapayipi bese uvula iyunithi.
2. Xhuma ikhebuli yomsindo yekhwalithi ephezulu ye-XLR (ayihlinzekiwe) kusokhethi ye-DMX out (owesifazane) ye-LED Master II.
   QAPHELA: Ikhebuli yomsindo ye-XLR efanelekile ixhuma iziqondiso ezimbili zesignali ku-PIN 2 kanye no-3, kuyilapho umhlabathi udayiswa ku-PIN 1. Sicela uqiniseke ukuthi izintambo azishintshi phakathi kwezintambo: iphutha le-polarity noma ukujikeleza okufushane phakathi kwamaphini kuzoba okungenani. thikameza noma umise ngokuphelele umsebenzi wokulawula.
3. Xhuma enye ipulaki (yesifazane) yekhebula ku-DMX Esokhethini leyunithi yesigqila sokuqala.
4. Xhuma amayunithi esigqila engeziwe ngokwale phethini (okukhiphayo kwe-DMX kokokufaka kwe-DMX).

Okulandelayo, kufanele ufake ikheli le-DMX ngalinye leyunithi yesigqila ngayinye. Ukuze uthole ulwazi olwengeziwe ngalesi sihloko, funda amadokhumenti ahlinzekwe neyunithi.

Ukusebenza

Uma ama-peripherals exhunywe ku-LED Master II, ungasetha izici zokulawula. Qhubeka kanje:

1. Khetha imodi yesiteshi usebenzisa inkinobho ye-CHANNEL MODE (7). Amamodi alandelayo ayatholakala (ukuthola incazelo yemodi bheka ikhasi 6):

• I-RGB
• I-RGBD
• I-RGBW
• I-RGBWD
• I-DRGB
• I-DRGBW

Imodi ekhethiwe iboniswa ngama-LED ngaphezulu kwenkinobho.

2) Usebenzisa izinkinobho zekheli ezingaphansi kwefader khetha iqembu lesiteshi ofuna ukulilawula: ungakhetha eziteshini ezingu-40 sezizonke. I-LED yeqembu elisebenzayo ikhanyisa ukukhombisa ukukhetha kwamanje. Ungakhetha phakathi kwamaqembu eziteshi alandelayo:

• Ngesiteshi 1 kuya ku-10, cindezela inkinobho 1
• Ngesiteshi 11 kuya ku-20, cindezela inkinobho 2
• Ngesiteshi 21 kuya ku-30, cindezela inkinobho 3
• Ngesiteshi 31 kuya ku-40, cindezela inkinobho 4

Manje ungakhetha phakathi kwezinketho zokulawula ezilandelayo:

Ukulawula mathupha
Kule modi ungakwazi ukusetha mathupha izingxube zemibala oyifunayo ngezifenisha ze-R, G, B kanye ne-W/D.

QAPHELA: Kumodi yesiteshi se-M1 (RGB), i-W/D fader ayinawo umthelela.

Izingxube zombala wangaphakathi
Ngenye indlela, ungakhetha phakathi kwezingxube zombala zangaphakathi ze-LED Master II usebenzisa i-MIX fader. Izingxube zombala ziphrintwa kuphaneli ephezulu eduze kwefader.

Izinhlelo zangaphakathi
Ngefader ye-MAC ungakhetha phakathi kwezinhlelo zangaphakathi eziyi-8 ze-LED Master II. Kuye ngokukhetha kwakho, le mithelela elandelayo iqalwa ngamavelu esiteshi ahambisanayo:

Uhlelo	Inani lesiteshi	Umphumela
I-MAC 1	8–38	Umbala uyafiphala obomvu – oluhlaza okotshani
I-MAC 2	39–69	Umbala ofiphalayo obomvu – oluhlaza okwesibhakabhaka
I-MAC 3	70–100	Umbala oluhlaza ofiphalayo - oluhlaza okwesibhakabhaka
I-MAC 4	101–131	Umbala uyafiphala obomvu – oluhlaza – oluhlaza okwesibhakabhaka
I-MAC 5	132–162	Ukujaha obomvu - oluhlaza
I-MAC 6	163–193	Ukujaha okubomvu - okuluhlaza okwesibhakabhaka
I-MAC 7	194–224	Ukujaha okuluhlaza - blue
I-MAC 8	225–25	Ukujaha obomvu - oluhlaza - oluhlaza okwesibhakabhaka

Ngokucindezela inkinobho ethi RUN MODE ungakwazi ukushintsha phakathi kwe-AUTO nemodi yoMSINDO ukuze uguqule ngokuzenzakalelayo umphumela.

• Kumodi ye-AUTO, izinhlelo zishintshwa ngokuzenzakalelayo ngesivinini esisethwe nge-SPEED fader ebangeni elisuka ku-0.1 kuye kwengama-30.
• Kumodi yoMSINDO, izinhlelo zishintshwa ngokuguqukayo kuye ngokuzwela komculo osethwe nge-Sound Sensiti-vity fader. Uma izinhlelo zingashintshiwe njengoba bekulindelekile, khulisa noma wehlise ukuzwela komculo njengoba kudingeka.

Imodi ye-STROBE
Imodi ye-Strobe yenziwa yasebenza ngokucindezela nokubamba inkinobho ethi STROBE. Uma ubambe inkinobho ethi STROBE, isivinini somphumela we-Strobe singasethwa ngefader ye-STROBE SPEED ebangeni elisuka ku-1 kuye ku-20Hz.
Lapho inkinobho ye-STROBE ikhishwa, i-LED Master II ibuyela kumodi yangaphambilini.
Ngaphandle kwemodi yamanje, ungacindezela inkinobho ethi BLACK OUT nganoma yisiphi isikhathi ukuze wenze mnyama okwesikhashana zonke izibani ezixhunyiwe ngesikhathi sokucindezela inkinobho.

Imininingwane

• Uhlobo Isilawuli se-DMX
• Idatha ifomethi I-DMX
• I-DMX Iphrothokholi I-DMX 512
• I-DMX iziteshi 40
• Izindlela zesiteshi I-RGB, RGBD, RGBW, RGBWD, DRGB, DRGBW
• I-vol esebenzayotage 9–12VDC 300mA (amandla angaphandle afakiwe)
• Isixhumi se-DMX 3-pin XLR (okukhiphayo)
• Isisindo 0.8 kg
• Ubukhulu 200 × 56 × 110 mm (H × W × D)

Ububanzi bokunikezwa

• I-Autark LED Master II: 1 pc
• Ukunikezwa kwamandla odongeni: 1 pc
• Incwadi yomsebenzisi: 1 pc

Umshwana wokuzihlangula

I-Nowsonic ithathe zonke izinyathelo ezingenzeka ukuze kuqinisekiswe ukuthi ulwazi olunikezwe lapha lulungile futhi luphelele.
Akukho sehlakalo i-Nowsonic engakwazi ukwamukela noma yisiphi isikweletu noma isibopho sanoma yikuphi ukulahleka noma ukulimala kumnikazi wezinto zokusebenza, noma yimuphi umuntu wesithathu, nanoma iyiphi into esetshenziswayo engabangelwa ukusetshenziswa kwaleli bhukwana noma izinto ezizichazayo.

Ukusevisa
Uma unombuzo noma uhlangabezana nezinkinga zobuchwepheshe, sicela uqale uthinte umdayisi wangakini othenge kuye ucingo. Uma kwenzeka isevisi idingeka, sicela uxhumane nomthengisi wangakini. Uma kungenjalo ungaxhumana nathi ngokuqondile. Sicela uthole imininingwane yethu yokuxhumana kweyethu webindawo ngaphansi www.nowsonic.com.

QAPHELA: Siqikelela kakhulu ukupakisha idivayisi ebhokisini elivikelwe kahle efekthri, ngakho-ke noma yimuphi umonakalo wokuthumela mancane kakhulu amathuba okuba. Nokho, uma lokhu kwenzeka sicela uxhumane nomphakeli wakho ngokushesha ukuze ubike umonakalo. Sincoma ukuthi ugcine okoqobo kokupakisha uma kwenzeka udinga ukuthumela noma ukuthutha idivayisi ngedethi ekamuva.

Ulwazi lwezomthetho
I-copyright yaleli bhukwana lomsebenzisi © 2014: Nowsonic
Izici zomkhiqizo, ukucaciswa nokutholakala kungashintsha ngaphandle kwesaziso sangaphambili.
Uhlelo v1.0, 07/2014
Ingxenye akukho. 311617

www.nowsonic.com

Amadokhumenti / Izinsiza

I-NOWSONIC AUTARK LED MASTER II DMX Isilawuli se-LED Lighting System [pdf] Imaniwali yosebenzisayo I-AUTARK LED MASTER II DMX Controller for LED Lighting System, AUTARK LED MASTER II, DMX Controller for LED Lighting System, LED Lighting System DMX Controller, DMX Controller, Controller

Izithenjwa

• Imaniwali yosebenzisayo