Notion M12 LTE CAT-1 Module
Imininingwane Yomkhiqizo
- Igama Lomkhiqizo: Notion LTE CAT-1 Module M12
- Imojula Yokuxhumana Yedatha Engenantambo
- Isekela i-TDD-LTE kanye ne-FDD-LTE Network Modes
- Usayizi Wephakheji: 23*23*2.3mm
- 65 Amaphedi e-LCC angaphandle, amaphedi e-LGA angama-49 aphansi
- Umsebenzi we-Bluetooth Owakhelwe ngaphakathi
Imiyalo yokusetshenziswa komkhiqizo
- Ukusekelwa kwebhendi:
Imojula isekela amabhendi e-LTE ahlukahlukene afaka amabhendi e-FDD kanye ne-TDD. - Umdwebo Webhulokhi Esebenzayo:
Imojula inomdwebo osebenzayo webhulokhi ukukhombisa izingxenye zayo zangaphakathi nokuxhumana. - Isixhumi esibonakalayo:
Imojula inikeza ukuxhumana okuningi kwe-GPIO, ukunikezwa kwamandla, i-USB, isilawuli se-LCD, i-GPS, ikhadi le-SIM, nokuningi. - Ukunikezwa kwamandla kagesi:
Imojula idinga ukunikezwa kwamandla okungu-3.3V kuya ku-4.3V ngevolthi evamiletagkwe 3.8v. - Izikhonkwane ze-GPIO:
I-module inezikhonkwane ze-GPIO zokulawula izibani ze-LED, i-backlight ye-LCD, i-backlight key, isimo sokushaja, ukuxhumana kwe-GPS, isikhombimsebenzisi se-LCD, ukuxhumana kwe-SIM khadi, nokuningi.
Imojula ye-M12 iyimojula yokuxhumana yedatha engenantambo ye-CAT-1 esekela izindlela zenethiwekhi ze-TDD-LTE ne-FDD-LTE. I-M12 yamukela iphakheji ye-LCC, ubukhulu obuphelele bungama-23*23*2.3mm, amaphedi e-LCC angama-65, amaphedi e-LGA angama-49, usayizi omncane, isixhumi esibonakalayo esicebile se-peripheral, kanye nesekhethi elula ye-peripheral, ngesikhathi esifanayo, umkhiqizo owakhelwe ngaphakathi ohambisanayo. Umsebenzi we-Bluetooth, okuletha izinketho eziningi zamakhasimende ahlukene design.
Ukusekelwa kwebhendi
- China
- I-LTE(FDD): 1/3/5/8
- LTE(TDD):34/38/39/40/41n
- IYurophu/Afrika/Middle East/Southeast Asia/South Asia/Korea
- LTE(FDD): 1/2/3/4/5/7/8/20/28
- LTE(TDD):34/38/39/40/41n
- i-Latin America
- LTE(FDD):1/2/3/4/5/7/8/12/13/17/66
- I-LTE(TDD):38/40/41n isici esijwayelekile
- Izinga Lokushisa Lokusebenza: -30℃~75℃Umswakama: 5%～95%
- Ukunikezwa kwamandla: 3.3-4.3V, okujwayelekile:3.8V
- Ukuchithwa kwamandla:3-15mA @3.8V
- Usayizi: 23 * 23 * 2.3mm
- Ngomyalo: 3GPP TS 27.007 futhi 27.005
- Isistimu esebenzayo:
- Windows/Linux/Android
Izici ze-RF
- Amandla adlulisiwe
I-LTE: +21dBm (3GPP TS 36.101 R9 Class 3) Isilinganiso - I-LTE Cat 1: DL 10Mbps / UL 5Mbps
Umdwebo webhulokhi elisebenzayo
Isixhumi esibonakalayo
- PWM*3
- I-USB 2.0*1
- Isiqephu *2
- I-SDIO *1
- I-ADC *2
- I2C *1
- I-SPI *1
- UMTISI OMQOKA:6*6
- USIM*2
- UMSINDO*1
- I-Antenna: LTE, BT
- Ukuzwela
- FDD B1 -99dBm(10M) FDD B2 -97.5dBm(10M) FDD B3 -99dBm(10M) FDD B4 -100dBm(10M) FDD B5 -99dBm(10M) FDD B7 -99dBm(10M8M99MDDm10) I-TDD B12 -100dBm(10M) TDD B13 -99.5dBm(10M) TDD B17 -100.5dBm(10M) FDD B20 -98.5dBm(10M) FDD B28 -99.5dBm(10M) TDD B34 -100.5dM TDD (10dM) -38dBm(100M) TDD B10 -39dBm(100.5M) TDD B10 -40dBm(100.5M) TDD B10 -41dBm(100.5M) TDD B10 -66dBm(100M)
| Incazelo yephinikhodi ye-M12 |
| I-PIN
CHA. |
I-PIN Igama |
I-PIN GPIO |
I/O |
Incazelo |
Ikholomu yokuphawula |
| 1 | I-LED1_CTRL | GPIO_21 | O | I-LED_CTRL ilawula ukukhanya kwe-LED
ngokusebenzisa i-triode yangaphandle |
MMC1_DAT2 |
|
2 |
KP_LED_PWM4 |
GPIO_11 |
O |
I-KP_LED_PWM4 ilawula ukukhanya okungemuva kokhiye nge-triode yangaphandle |
I2C2_SDA/PWM4 |
| 3 | LCD_BL_PWM3 | GPIO_10 | O | I-LCD_BL_PWM3 ilawula i-LCD
i-backlight ngokusebenzisa i-triode yangaphandle |
I2C2_SCL/PWM3 |
| 4 | GND | / | / | / | / |
| 5 | GND | / | / | / | / |
| 6 | GND | / | / | / | / |
| 7 | I-VBAT | / | PI | Ukunikezwa kwamandla:3.3to4.3V(okujwayelekile:3.8V) | Ububanzi besakhiwo akumele bube ngaphansi kuka-1.5mm |
| 8 | |||||
| 9 | |||||
| 10 | I-USB_VBUS | / | PI | Iphinikhodi yokuthola isimo se-USB | / |
| 11 | CHG_STAT | GPIO_32 | I | Iphinikhodi yokuthola isimo sokushaja yangaphandle
i-chip yokushaja |
I-PWM2 |
| 12 | CHG_EN | GPIO_22 | O | Nika amandla iphinikhodi ye-chip yokushaja yangaphandle | MMC1_DAT1 |
| 13 | GPS_VBACKUP | / | PO | Iphinikhodi yokulinda kagesi ye-GPS RTC | / |
| 14 | VLDO7_GPS_3
V3 |
/ | PO | Ukunikezwa kwamandla kwe-GPS yangaphandle
imojula |
Ubukhulu be-100mA yamanje |
| 15 | I-GPS_UART3_T
XD |
GPIO_15 | I/O | I-serial yemojuli ye-GPS yangaphandle
iphinikhodi ye-RX yokuxhumana |
Uma imojula ye-GPS yangaphandle ingu-3.3V, i-TX/RX idinga ukuguqulwa kwezinga libe ngu-3.3V |
| 16 | I-GPS_UART3_R
XD |
GPIO_14 | I/O | I-serial yemojuli ye-GPS yangaphandle
ukuxhumana TX pin |
|
|
17 |
I-VLDO2_1V8 |
/ |
PO |
I-1.8V LDO Output ingasetshenziselwa ukudonsa i-GPIO noma isikrini se-LCD sikagesi se-I/O noma amandla akhelwe ngaphakathi e-Bluetooth.
hlinzeka |
Ubukhulu be-200mA yamanje |
| 18 | I-VLDO6_LCD_2
V8 |
/ | PO | Ukunikezwa kwamandla kwesikrini se-LCD nokushintshwa kwe-RF
ukunikezwa kwamandla kagesi |
Ubukhulu be-100mA yamanje |
| 19 | LCD_RST | GPIO_124 | O | Iphinikhodi yokusetha kabusha ye-LCD serial peripheral
esibonakalayo |
/ |
| 20 | LCD_LDO_EN | GPIO_121 | O | Nika amandla iphinikhodi yokulawula ye-LCD Yangaphandle
Ukunikezwa kwamandla (LDO) |
/ |
| 21 | LCD_CS0 | GPIO_34 | O | Iphinikhodi yokukhetha izigqila yochungechunge lwe-LCD
isikhombimsebenzisi se-peripheral |
/ |
| 22 | LCD_SPI_DATA | GPIO_36 | O | Iphinikhodi yedatha ye-LCD serial peripheral
esibonakalayo |
UART3_TXD |
| 23 | LCD_SPI_RS | GPIO_35 | O | Iphinikhodi yomyalo ye-LCD serial peripheral
esibonakalayo |
UART3_RXD |
| 24 | LCD_SPI_CLK | GPIO_33 | O | Iphinikhodi yesignali yewashi ye-LCD serial peripheral
esibonakalayo |
/ |
| 25 | GND | / | / | / | / |
|
26 |
VLDO8_3V0_US IM2 |
/ |
PO |
I-SIM khadi 2 Ukunikezwa kwamandla |
Imojula ngokuzenzakalelayo
ibona i-SIM khadi engu-1.8V noma engu-3.0V |
| 27 | USIM2_CLK | GPIO_45 | O | I-SIM khadi 2 iwashi iphinikhodi | I-I2C4_SCL/GPIO45 |
| 28 | USIM2_RST_N | GPIO_47 | O | I-SIM khadi 2 Setha kabusha iphinikhodi | |
| 29 | USIM2_DATA | GPIO_46 | O | Iphinikhodi yedatha engu-2 ye-SIM khadi | I-I2C4_SDA/GPIO46 |
|
30 |
I-VLDO3_3V0_US IM |
/ |
PO |
I-SIM khadi 1 Ukunikezwa kwamandla |
Imojula ibona ngokuzenzakalelayo i-1.8V noma i-3.0V
Ikhadi le-SIM |
| 31 | USIM_CLK | / | O | I-SIM khadi 1 iwashi iphinikhodi | / |
| 32 | USIM_RST_N | / | O | I-SIM khadi 1 Setha kabusha iphinikhodi | / |
| 33 | USIM_DATA | / | O | Iphinikhodi yedatha engu-1 ye-SIM khadi | / |
| 34 | GND | / | / | / | / |
| 35 | USB_DP | / | I/O | Isiginali yedatha ehlukile ye-USB | Izintambo zidinga 90Ω
umehluko we-impedance |
| 36 | I-USB_DN | / | I/O | ||
| 37 | I-EAR_N | / | AO | Isiginali yedatha ehlukile yomsindo | / |
| 38 | I-EAR_P | / | AO | ||
| 39 | SPKPA_EN | GPIO_80 | O | I-Audio PA inika amandla iphinikhodi yokulawula | / |
| 40 | MIC_P | / | AI | Okokufaka komsindo we-MIC | / |
| 41 | I-MICBIAS | / | O | I-MICBIAS yomsindo | / |
|
42 |
MICBIAS_CTL |
GPIO_37 |
O |
I-MICBIAS yomsindo ilawulwa i-triode ukuze
shintsha amaphinikhodi we-MIC/amahedisethi e-MIC |
/ |
| 43 | HP_DET | GPIO_79 | I | Iphinikhodi yokuhlonza i-earphone | / |
| 44 | HEAD_PTT | GPIO_78 | I | Iphinikhodi ye-headphone ye-PTT. Okuphansi okusebenzayo | / |
| 45 | I-CI2C_SCL | GPIO_49 | I/O | Iphini lewashi le-I2C | / |
| 46 | CI2C_SDA | GPIO_50 | I/O | Iphinikhodi yedatha ye-I2C | / |
| 47 | GND | / | / | / | / |
| 48 | GND | / | / | / | / |
| 49 | RF_ANT | / | I-AI/O | Iphinikhodi ye-antenna ye-RF | / |
| 50 | GND | / | / | / | / |
| 51 | GND | / | / | / | / |
| 52 | MK_OUT_0 | GPIO_01 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
/ |
| 53 | MK_IN_0 | GPIO_00 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
/ |
| 54 | MK_IN_1 | GPIO_02 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
UART4_RXD |
| 55 | MK_OUT_1 | GPIO_03 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
UART4_TXD |
| 56 | MK_IN_4 | GPIO_08 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
I-PWM1/PWM3 |
|
57 |
MK_OUT_4 |
GPIO_09 |
I/O |
iphinikhodi yokuthola okokufaka yokhiye be-matrix/okhiye abangabodwana |
PWM2/PWM4/MKOUT[4]:
Izinga eliphansi litholwa ngesikhathi vula , faka imodi yokulanda ye-USB |
| 58 | MK_IN_2 | GPIO_04 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
UART4_RXD/SSP1_SCLK |
| 59 | MK_OUT_2 | GPIO_05 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
UART4_TXD/SSP1_FRM |
| 60 | MK_IN_3 | GPIO_06 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
PWM3/SSP1_RXD |
| 61 | GND | / | / | / | / |
|
62 |
KULUNGILE |
/ |
I |
Esimeni esingekho, iphinikhodi iyaqhubeka nokudilika ukuze i-3S ivuleke, futhi esimweni, iphinikhodi iyaqhubeka nokuhlehla ukuze
5S ukuze ucime |
Ungadonseli phansi ngokuqondile; uma kungenjalo, uhlelo luzoqala kabusha ngokuqhubekayo |
|
63 |
I-EXTON1N |
/ |
I |
Donsela phansi iphinikhodi ye-EXTON1N ngokuqondile bese uyivula ngokuzenzakalelayo. Gcina le phinikhodi
NC uma ingasetshenziswa. |
/ |
| 64 | I-LED2_CTRL | GPIO_24 | O | I-LED2_CTRL ilawula ukukhanya kwe-LED
ngokusebenzisa i-triode yangaphandle |
MMC1_DAT0 |
| A1 | GND | / | / | / | / |
| A2 | GND | / | / | / | / |
| A3 | GND | / | / | / | / |
| A4 | GND | / | / | / | / |
| A5 | GND | / | / | / | / |
| A6 | CP_UART_DTR | GPIO_27 | I/O | Itheminali Yedatha Ye-CP Isilungile | MMC1_CLK |
| A7 | GND | / | / | / | / |
| A8 | GND | / | / | / | / |
| A9 | GND | / | / | / | / |
| B1 | GND | / | / | / | / |
| B2 | GND | / | / | / | / |
| B3 | GND | / | / | / | / |
| B4 | GND | / | / | / | / |
| B5 | GND | / | / | / | / |
| B6 | GND | / | / | / | / |
| B7 | GND | / | / | / | / |
| B8 | GND | / | / | / | / |
| B9 | MK_OUT_3 | GPIO_07 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
PWM4/SSP1_TXD |
| C1 | GND | / | / | / | / |
| C2 | GND | / | / | / | / |
| C3 | GND | / | / | / | / |
| C4 | MK_OUT_6 | GPIO_13 | I/O | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
I2C3_SDA |
| D1 | GND | / | / | / | / |
| D2 | GND | / | / | / | / |
| D3 | GPIO_23 | GPIO_23 | I/O | Isizinda samandla esingu-1.8V, i-GPIO, Gcina le phinikhodi
NC uma ingasetshenziswa. |
|
| D4 | MK_IN_6 | GPIO_12 | I | iphinikhodi yokuthola okokufaka ye-matrix
okhiye/okhiye ngabanye |
I-I2C3_SCL |
| E1 | GND | / | / | / | / |
| E2 | GND | / | / | / | / |
| E3 | LCD_TE | GPIO_26 | O | isignali yokuvumelanisa yozimele ye
LCD_SPI isixhumi esibonakalayo se-peripheral |
I2C4_SDA/MMC1_CLK |
| E4 | AP_UART1_RX
D |
GPIO_29 | I | Iphinikhodi yokuthola idatha yomkhiqizo we-AP | |
| F1 | GND | / | / | / | / |
| F2 | GND | / | / | / | / |
| F3 | USIM_CD | GPIO_25 | I/O | Iphinikhodi yokutholwa kokufakwa kwekhadi le-SIM
(kugciniwe) |
I2C4_SCL/MMC1_CMD |
| F4 | AP_UART1_TX
D |
GPIO_30 | O | Iphinikhodi yokuthumela idatha ye-AP | okuzenzakalelayo: Ilogi yokuphrinta |
| G1 | GND | / | / | / | / |
| G2 | GND | / | / | / | / |
| G3 | CP_UART_CTS | GPIO_53 | I/O | I-CP serial interface isula ukudlulisa
iphinikhodi |
UART3_RXD/MMC1_DA
T1 |
| G4 | CP_UART_RXD | GPIO_51 | I | Iphinikhodi yokufaka ye-CP | MMC1_DAT3 |
| H1 | GND | / | / | / | / |
| H2 | GND | / | / | / | / |
| H3 | GND | / | / | / | / |
| H4 | GND | / | / | / | / |
| H5 | GND | / | / | / | / |
| H6 | GND | / | / | / | / |
| H7 | GND | / | / | / | / |
| H8 | GND | / | / | / | / |
| H9 | CP_UART_RTS | GPIO_54 | I/O | Isicelo sokuthumela iphinikhodi ye-serial interface ye-CP | UART3_TXD/MMC1_DA
T0 |
| J1 | GND | / | / | / | / |
| J2 | GND | / | / | / | / |
| J3 | GND | / | / | / | / |
| J4 | I-AUXADC_IN3 | / | AI | I-ADC Extended interface ingasekela
i-vol ephezulutage ukuthola umthamo webhethri |
1V8 noma 1V2 isizinda samandla, okuzenzakalelayo:1V2 isizinda samandla |
| J5 | AUXADC_IN | / | AI | I-interface ye-ADC_IN2 isetshenziselwa ukuqoqa
isignali yevolumu ye-potentiometer |
|
| J6 | CP_UART_RI | GPIO_31 | I/O | I-CP serial ring ekhombisa iphinikhodi | MMC1_CMD |
| J7 | TORCH_PWM1 | GPIO_126 | O | okuzenzakalelayo: Iphinikhodi yokulawula ukukhanya kwethoshi | PMW1/PWM4 |
| J8 | CP_UART_TXD | GPIO_52 | I/O | Iphinikhodi yokukhipha ye-CP | MMC1_DAT2 |
| Z1 | GND | / | / | / | / |
| Z2 | GND | / | / | / | / |
| Z3 | GND | / | / | / | / |
| Z4 | GND | / | / | / | / |
| 65 | INTUTHU | / | I-AI/O | / | |
| / | Qaphela: Zonke izixhumanisi ze-I/O ezingenhla zingezevolumu ye-1.8Vtage isizinda ngaphandle kokuthi kucacisiwe | ||||
Isexwayiso se-FCC
Isexwayiso se-FCC: Noma yiziphi izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile inhlangano enesibopho sokuthobela imithetho kungase kuqede igunya lomsebenzisi lokusebenzisa lesi sisetshenziswa. Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC.
Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi, futhi
- lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
Lolu cingo kanye nezimpondo zalo akumele kubekwe endaweni eyodwa noma kusebenze ngokuhambisana nanoma yiluphi olunye uthi noma isidluliseli.
- Ulwazi kumsebenzisi.
- Kudivayisi yedijithali Yekilasi B noma i-peripheral, imiyalelo enikezwe umsebenzisi izofaka isitatimende esilandelayo noma esifanayo, esibekwe endaweni evelele embhalweni webhukwana:
Qaphela: Lesi sixhobo sihloliwe futhi kwatholakala ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngaphansi kwengxenye 15 Yemithetho ye-FCC.
Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lo mshini ukhiqiza, usebenzise, futhi ungasakaza amandla efrikhwensi yomsakazo futhi, uma ungafakiwe futhi usetshenziswa imiyalelo, ungabangela ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:
- Hlela kabusha noma hambisa uthi olwamukelayo.
- Khulisa ukuhlukana phakathi kwezinto zokusebenza nomamukeli.
- Xhuma okokusebenza endaweni esesekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
- Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.
Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-FCC ebekwe endaweni engalawuleki. Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20cm phakathi kwe-radiator nomzimba wakho. Isitatimende Sokuchayeka Emisebeni: Lesi sisetshenziswa sithobela imikhawulo yokuchayeka emisebeni ye-FCC ebekwe endaweni engalawuleki. Lesi sithumeli akumele sibekwe endaweni eyodwa noma sisebenze ngokuhlangana nanoma iyiphi enye i-antenna noma isidluliseli. Ukutholakala kwamanye amashaneli athile kanye/noma amabhendi efrikhwensi okusebenza kuncike ezweni futhi ahlelwe embonini ukuze afane nendawo okuhlosiwe. Ukulungiselelwa kwe-firmware akufinyeleleki kumsebenzisi wokugcina.
Umkhiqizo wokugcina kufanele ulebulwe endaweni ebonakalayo nalokhu okulandelayo: “Iqukethe Imojula Yokudluliswa kwe-Transmitter “FCC ID: 2AR45-M12”
Imfuneko nge-KDB996369 D03
Uhlu lwemithetho ye-FCC esebenzayo
- Faka kuhlu imithetho ye-FCC esebenza kusidlulisi semodular. Le yimithetho esungula ngokuqondile amabhendi okusebenza, amandla, ukukhishwa okungamanga, kanye namaza okusebenza ayisisekelo. UNGAKUHLULULE ukuthobela imithetho ye-radiator ngokungahlosiwe (Ingxenye 15 Engaphansi B) njengoba lokho kungewona umbandela wesibonelelo semojula esinwetshelwa kumkhiqizi wokusingatha. Bheka futhi Isigaba 2.10 ngezansi mayelana nesidingo sokwazisa abakhiqizi abasingatha ukuthi ukuhlolwa okwengeziwe kuyadingeka.3
- Incazelo: Le mojula ihlangabezana nezidingo zezingxenye ze-FCC 22, 24, 27.it Ikhonjwe Ngokuqondile Amandla aphumayo Aqhutshwa, Amandla Asebenzayo E-Radiated of Transmitter(EIRP), isilinganiso esiphezulu kuya kwesilinganiso, 99% & 26dB Occupied Bandwidth, Band Edge at antenna amatheminali, ukukhishwa okungamanga kumatheminali e-antenna, Amandla enkundla yemisebe engamanga, Ukuzinza kwemvamisa.
Fingqa izimo ezithile zokusebenza zokusebenza.
Chaza izimo zokusetshenziswa ezisebenza kumthumeli wemodular, okuhlanganisa nesokuqalaampnoma yimiphi imikhawulo ezintini, njll. Okwesiboneloample, uma kusetshenziswa izimpondo ze-point-to-point ezidinga ukuncishiswa kwamandla noma isinxephezelo sokulahleka kwekhebula, khona-ke lolu lwazi kufanele lube semiyalweni. Uma imikhawulo yemibandela yokusebenzisa idlulela kubasebenzisi abangochwepheshe, imiyalelo kufanele isho ukuthi lolu lwazi ludlulela kumanuwali weziqondiso zomkhiqizi. Ngaphezu kwalokho, ulwazi oluthile lungase ludingeke, njengokuzuza okuphezulu ngebhendi ngayinye kanye nenzuzo encane, ikakhulukazi kumadivayisi ayinhloko kumabhendi angu-5 GHz DFS.
Incazelo: I-antenna yomkhiqizo isebenzisa i-antenna engabuyiseleki enenzuzo ye-0dBi 2.4 Single Modular
Uma i-modular transmitter ivunywa “njenge-Single Modular,” khona-ke umkhiqizi wemojula unesibopho sokugunyaza indawo yomsingathi lapho i-Single Modular esetshenziswa khona. Umkhiqizi we-Single Modular kufanele achaze, kokubili ekufayeleni nasemiyalweni yokufaka, enye indlela isho umkhiqizi we-Single Modular ayisebenzisayo ukuze aqinisekise ukuthi umsingathi uhlangabezana nezimfuneko zokwanelisa izimo zomkhawulo zemojuli. Umkhiqizi we-Single Modular unokuvumelana nezimo ukuchaza enye indlela yakhe yokubhekana nezimo ezikhawulela ukugunyazwa kokuqala, njengokuvikela, ukusayina okuncane ampi-litude, i-modulation evinjiwe/okufakwayo kwedatha, noma ukulawulwa kokunikezwa kwamandla. Enye indlela ingase ihlanganise umkhiqizi wemojuli elinganiselweviewfaka idatha yokuhlola enemininingwane noma imiklamo yomsingathi ngaphambi kokunikeza umkhiqizi womsingathi imvume.
Le nqubo ye-Single Modular iyasebenza nasekuhloleni ukuchayeka kwe-RF uma kudingekile ukukhombisa ukuthobela umsingathi othile. Umkhiqizi wemojula kufanele asho ukuthi ukulawulwa komkhiqizo okuzofakwa kuwo isidluliseli semodula kuzogcinwa kanjani ukuze kuqinisekiswe ukuhambisana okugcwele nomkhiqizo. Kwababungazi abengeziwe ngaphandle komsingathi othile onikeze umkhawulo ekuqaleni
Imojuli, inguquko yemvume Yekilasi II iyadingeka kusibonelelo semojula ukuze kubhaliswe umsingathi owengeziwe njengomsingathi othize futhi ogunyazwe nemojula.
Incazelo: Imojula iyimojuli eyodwa.
Landelela imiklamo ye-antenna
Ukuze uthole isidlulisi esiyimojuli esinemiklamo ye-antenna yokulandela umkhondo, bheka isiqondiso kumbuzo 11 we-KDB Publication 996369 D02 FAQ - Amamojula Ama-Micro-Strip Antennas and Traces. Ulwazi lokuhlanganisa luzofaka phakathi kabusha kwe-TCBview imiyalelo yokuhlanganisa yalezi zici ezilandelayo: ukwakheka komklamo wokulandela umkhondo, uhlu lwezingxenye (BOM), uthi, izixhumi, nezidingo zokuhlukaniswa.
- Ulwazi oluhlanganisa ukwehluka okuvunyelwe (isb., landelela imikhawulo yemingcele, ukujiya, ubude, ububanzi, umumo, ukungaguquguquki kwe-dielectric, kanye ne-impedance njengoba kusebenza ohlotsheni ngalunye lwe-antenna);
- Idizayini ngayinye izobhekwa njengohlobo oluhlukile (isb., ubude be-antenna kuma-multiple(ama) kaningi, ubude begagasi, kanye nokuma kwe-antenna (ukulandela okusesigabeni) kungathinta ukuzuza kwe-antenna futhi kufanele kucatshangelwe);
- Imingcele izohlinzekwa ngendlela evumela abakhiqizi bokusingatha ukuklama ukwakheka kwebhodi lesekethe ephrintiwe (i-PC);
- Izingxenye ezifanele ngomkhiqizi kanye nokucaciswa; e) Izinqubo zokuhlola zokuqinisekisa umklamo; futhi
- Izinqubo zokuhlola ukukhiqiza zokuqinisekisa ukuhambisana
Umnikezeli wemojula uzohlinzeka ngesaziso sokuthi noma yikuphi ukuchezuka kusuka kumapharamitha achaziwe wokulandela umkhondo wothi, njengoba kuchazwe imiyalelo, kudinga ukuthi umenzi womkhiqizo womsingathi azise onikeziwe wemojula ukuthi ufisa ukushintsha idizayini yokulandela i-antenna. Kulesi simo, isicelo sokushintsha imvume ye-Class II siyadingeka ukuba sibe filed ngumnikezeli, noma umenzi womsingathi angathatha isibopho ngoshintsho lwenqubo ye-FCC ID (isicelo esisha) esilandelwa yi-Class II yesicelo soshintsho lwemvume.
Ukucatshangelwa kokuchayeka kwe-RF
Kubalulekile ukuthi abanikezwa amamojula basho ngokucacile nangokucacile izimo zokuchayeka ku-RF ezivumela umenzi womkhiqizo ophethe ukusebenzisa imojuli. Kudingeka izinhlobo ezimbili zemiyalelo ukuze uthole ulwazi lokuchayeka ku-RF:
- Kumakhi womkhiqizo ophethe, ukuchaza izimo zohlelo (iselula, ephathekayo – xx cm ukusuka emzimbeni womuntu); futhi
- Umbhalo owengeziwe uyadingeka ukuze umenzi womkhiqizo osingethe anikeze abasebenzisi bokugcina kumanuwali wabo womkhiqizo wokugcina. Uma izitatimende zokuchayeka kwe-RF nezimo zokusebenzisa zinganikezwanga, umkhiqizi womkhiqizo osokhaya kudingeka azibophezele ku-ule ngoshintsho ku-ID ye-FCC (uhlelo lokusebenza olusha).
Incazelo: Imojula ithobelana nemikhawulo yokuchayeka kwe-FCC radiofrequency radiation ezindaweni ezingalawulwa. Lolu cingo lufakiwe futhi lusebenza ngebanga elingaphezu kuka-20 cm phakathi kwe-radiator nomzimba wakho.” Le mojula ilandela ukwakheka kwesitatimende se-FCC, i-FCC ID: 2AR45-M12
Izimpondo
Uhlu lwezimpondo ezifakwe esicelweni sokuthola isitifiketi kufanele lunikezwe emiyalweni. Kumamojula amamojula agunyazwe njengamamojula anomkhawulo, yonke imiyalelo esebenzayo yesifaki esebenzayo kufanele ifakwe njengengxenye yolwazi kumkhiqizi womkhiqizo osingathiwe. Uhlu lwezimpondo luzophinde luhlonze izinhlobo zezimpondo (i-monopole, i-PIFA, i-dipole, njll. (qaphela ukuthi ngokwesiboneloampi-“omnidirectional antenna” ayibhekwa “njengohlobo oluthile lwe-antenna”).
Ezimweni lapho umkhiqizi womkhiqizo ophethe unesibopho sesixhumi sangaphandle, isiboneloampngephinikhodi ye-RF kanye nedizayini yokulandela i-antenna, imiyalelo yokuhlanganisa izokwazisa isifaki ukuthi isixhumi esiyingqayizivele sothi kufanele sisetshenziswe Engxenyeni ye-15 yezidluliseli ezigunyaziwe ezisetshenziswa emkhiqizweni womsingathi.
Abakhiqizi bamamojula bazohlinzeka ngohlu lwezixhumanisi ezihlukile ezamukelekayo.
Incazelo: I-antenna yomkhiqizo isebenzisa i-antenna engabuyiseleki enenzuzo engu-0dBi
Ilebula nolwazi lokuhambisana
Izibonelelo zibophezelekile ukuqhubeka nokuthobela amamojula azo emithethweni ye-FCC. Lokhu
kufaka phakathi ukweluleka abakhiqizi bomkhiqizo abasingathile ukuthi badinga ukunikeza ilebula ebonakalayo noma ye-e ethi "Iqukethe i-FCC ID" nomkhiqizo wabo ophelile. Bheka Izinkombandlela Zokulebula kanye Nolwazi Lomsebenzisi lwamadivayisi e-RF – KDB Publication 784748.
Incazelo: Isistimu yomsingathi esebenzisa le mojula, kufanele ibe nelebula endaweni ebonakalayo ebonisa imibhalo elandelayo: “Iqukethe i-FCC ID: 2AR45-M12
Ulwazi lwamamodi okuhlola kanye nezidingo zokuhlola ezengeziwe
- Iziqondiso ezengeziwe zokuhlola imikhiqizo yokusingathwa zinikezwe kokuthi I-KDB Publication 996369 D04 Module Integration Guide. Amamodi okuhlola kufanele acabangele izimo zokusebenza ezihlukene zesidlulisi semodyuli ezimele yodwa kumsingathi, kanye namamojula amaningi athumela ngesikhathi esisodwa noma amanye ama-transmitter emkhiqizweni womsingathi.
Umnikezeli kufanele anikeze ulwazi lokuthi amiswa kanjani amamodi okuhlola okuhlolwa komkhiqizo wezimo ezihlukene zokusebenza zesidlulisi semodula esizimele sodwa kumsingathi, uma kuqhathaniswa namamojula amaningi, adlulisa kanyekanye noma amanye ama-transmitter kumsingathi. - Abanikezwa usizo bangakhuphula ukusetshenziswa kwama-modular transmitter abo ngokunikeza izindlela ezikhethekile, amamodi, noma imiyalelo elingisa noma ebonisa ukuxhumeka ngokunika amandla isidlulisi. Lokhu kungenza kube lula kakhulu ukuzimisela komkhiqizi womsingathi ukuthi imojuli njengoba ifakwe kumsingathi ithobela izimfuneko ze-FCC.
Incazelo: I-Shanghai Notion Information Technology CO. LTD ingakhuphula ukusetshenziswa kwama-modular transmitters ngokunikeza imiyalelo elingisa noma ebonisa uphawu ekuxhumekeni ngokunika amandla isidlulisi.
Ukuhlola okwengeziwe, Ingxenye 15 Umshwana Wokuzihlangula Oyingxenye B
Umnikezeli kufanele afake isitatimende sokuthi isidlulisi semodulasi sigunyazwe yi-FCC kuphela ezingxenyeni ezithile zemithetho (okungukuthi, imithetho yesidluliseli se-FCC) esohlwini lwesibonelelo nokuthi umkhiqizi womkhiqizo osokhaya unesibopho sokuthobela noma yimiphi eminye imithetho ye-FCC esebenza ku umsingathi awukhaviwe yi-modular transmitter grant yesitifiketi. Uma onikezwayo emakethe umkhiqizo wakhe njengothobela Ingxenye 15 Engaphansi B (lapho futhi iqukethe isifunda sedijithali serediyetha), khona-ke onikezwayo uzohlinzeka ngesaziso esisho ukuthi umkhiqizo wokugcina wokuba usokhaya usadinga ukuhlolwa kokuthobela Ingxenye 15 Ingxenye B efakwe isidluliseli esiyimodular. .
Incazelo: Imojula engenawo umjikelezo wedijithali werediyetha ngokungahlosiwe, ngakho-ke imojuli ayidingi ukuhlolwa Okwenziwa I-FCC Ingxenye 15 Ingxenye Engaphansi B. Umsingathi kufanele ahlolwe Ingxenye Engaphansi ye-FCC B.
FAQ
Q: Yiziphi izilinganiso module M12?
A: I module M12 has a usayizi jikelele 23*23*2.3mm.
Q: Yiziphi izindlela zenethiwekhi ezisekelwa imojula ye-M12?
A: Imojula ye-M12 isekela amamodi enethiwekhi ye-TDD-LTE kanye ne-FDD-LTE.
Q: Ingabe imojula ye-M12 inomsebenzi owakhelwe ngaphakathi we-Bluetooth?
A: Yebo, imojula ye-M12 inomsebenzi we-Bluetooth owakhelwe ngaphakathi ohambisanayo.
Amadokhumenti / Izinsiza
 |
Notion M12 LTE CAT-1 Module [pdf] Incwadi Yomnikazi 2AR45-M12, 2AR45M12, M12 LTE CAT-1 Module, M12, LTE CAT-1 Module, CAT-1 Module, Module |