I-Modecom Volcano Stellar Midi Computer Case
Iphaneli I/O
- AMANDLA
- SETHA KABUSHA
- Umsindo we-HD
- I-USB 3.0
- I-USB 3.0
- I-USB-C
- I-LED
Izesekeli
- A HDD SCREWS
- B MOTHERBOARD & SSD SCREWS.
- C PSU AND GPU SCREWS
- D RISER CABLE STANDOFFS
- E I-ZIP TIE
- F ISIKRAYELI
- G INGUBO
- H TG PANEL CLIP
- I SSD SILICONE PADS
- J MB STANDOFFS
- K I-VELCRO STRAPS
- L SSD SCREWS
Kuphelileview
STELLAR NF – NO FANS PRE-INSTALLED
Ubukhulu
Ukufakwa kwe-Motherboard
ARGB Hub Installation
PRE-INSTALLED: STELLAR 5F & STELLAR 8F
UMSEBENZI
- Cindezela kafushane inkinobho ye-LED ukuze ujikeleze kumamodi e-LED.
- Cindezela inkinobho ye-LED imizuzwana emi-3 ukuze ushintshe imodi ibe isilawuli sebhodi lomama.
- Cindezela inkinobho ye-LED imizuzwana emi-5 ukuze uvale amandla e-LED.
- Cindezela inkinobho ye-LED ukuze ubuyele kusilawuli mathupha.
- After connecting the fans to the motherboard PWM, you can control the fan speed from the Motherboard Settings.
- Memory function after power off. CONNECT CONTROLLER TO PROPER FAN CONNECTOR ON M/B. (FOR A MOTHERBOARD EQUIPPED WITH ARGB FAN CONTROL CONNECTORS, CONNECT IT TO LED CONTROL CONNECTOR ON MB) CONNECT POWER SUPPLY TO SATA. CONNECT LED SW.
3.5” ukufakwa kwe-HDD
2.5” SSD installation
GPU horizontal installation
GPU vertical installation
Ukufakwa kokuphakelwa kwamandla
Quick Start Guide / Installation
- Vula izindlu.
- Faka zonke izingxenye zekhompuyutha ulandela imiyalelo emiyalweni yokuhlanganisa ngayinye yengxenye ngayinye.
- Faka endlini bese uxhuma amandla kagesi ezingxenyeni ezidingekayo, ngokulandela imiyalelo yokufaka ugesi kanye nemiyalelo yezingxenye ezidinga ukuxhumeka kwayo. Ukunikezwa kwamandla kufakwe emhubheni, engxenyeni engezansi yekesi, ifeni ibheke ngaphandle kwekesi (phansi).
- Hlola ukuhlanganiswa okulungile kwezingxenye kanye nokuxhumeka kwamapulaki wamandla.
- Vala izindlu.
- Xhuma imonitha, ikhibhodi nezinye izesekeli kukhompuyutha.
- Xhuma intambo yamandla kusokhethi endaweni kagesi kanye nesokhethi yamapayipi angu-230V.
- Setha iswishi yamandla kundlu ye-PSU iye endaweni ethi I (uma ikhona).
This device was designed and made of high-quality reusable materials and components. If the device, its packaging, user’s manual, etc. are marked with crossed waste container, it means they are subject to segregated household waste collection in compliance with the Directive 2012/19/UE of the European Parliament and of the Council.
This marking informs that electric and electronic equipment shall not be thrown away together with household waste after it’s been utilised. The user is obliged to bring the utilised equipment to electric and electronic waste collection point. Those running such collection points, including local collection points, shops or commune units, provide convenient system enabling to scrap such equipment. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. A household plays crucial role in contributing to recycling and reusing the waste equipment. This is the stage where the basics are shaped which largely influence the environment being our common good. Households are also one of the biggest users of small electrical equipment.
Ukuphatha okuphusile kulesi sigabatage aids and favors recycling. In the case of improper waste management, fixed penalties may be imposed in accordance with national legal regulations.
This marking informs that electric and electronic equipment shall not be thrown away together with household waste after it’s been utilised. The user is obliged to bring the utilised equipment to electric and electronic waste collection point. Those running such collection points, including local collection points, shops or commune units, provide convenient system enabling to scrap such equipment. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. A household plays crucial role in contributing to recycling and reusing the waste equipment. This is the stage where the basics are shaped which largely influence the environment being our common good. Households are also one of the biggest users of small electrical equipment.
Ukuphatha okuphusile kulesi sigabatage aids and favors recycling. In the case of improper waste management, fixed penalties may be imposed in accordance with national legal regulations.
Computer Case Safety Instructions
- Isingeniso
Thank you for choosing our computer case. To ensure your safety and proper operation of the device, please read this manual carefully. Following these instructions will help avoid potential hazards and damage to your equipment. - Izexwayiso Nezokuphepha
- Ukufakwa nokusebenza
- Never open the case while it is in operation. Before beginning installation or maintenance, make sure the computer is unplugged.
- Do not use the case in a humid environment. Moisture can cause short circuits and damage to components.
- Be careful of the sharp edges inside the case. Wear protective gloves when installing components to avoid injury.
- Make sure the mounting screws are tightened, but not overtightened. Overtightening can damage the threads.
- Ukunikezwa kwamandla kagesi
- Only use power supplies that are compatible with the case. An incorrect power supply can cause overheating or short circuits.
- Check for correct wiring. Incorrectly connected cables can damage components and the case.
- Do not load multiple devices on the same electrical circuit. Ensure adequate power stability to avoid overloading the electrical network.
- Ventilation and Overheating
- Ensure adequate airflow. Do not block vents or filters. Clean dust filters regularly.
- Do not install the case in an enclosed space without air circulation. Avoid placing the computer near heat sources such as radiators.
- Monitor component temperatures. If you are using high-performance components, consider installing additional fans or a liquid cooling system.
- Isitoreji Nezokuthutha
- Store the case in a dry and clean place. Avoid exposure to extreme temperatures, moisture, and dust.
- Protect the case from shocks during transportation. Use the original packaging or appropriate protective materials.
- Ukufakwa nokusebenza
- Iziyalezo Zomhlangano
- Ukulungiselela Ukuhlangana
- Make sure you have all the required tools (e.g. Phillips screwdriver).
- Choose a suitable work area with access to lighting and sufficient work space.
- Ifaka Izingxenye
- Install the motherboard on the mounting spacers to avoid short circuits.
- Follow the manufacturer’s instructions when installing the CPU, RAM, and graphics card.
- Connect the cables according to the labels on the motherboard and power supply.
- Make sure that all components are properly attached and that no cables block the fans.
- Ukulungiselela Ukuhlangana
- Ukuhlanza Nokunakekela
- Regularly remove dust from the inside of the case using compressed air.
- Check the condition of the dust filters and clean them every few weeks.
- Do not use any liquid cleaning agents inside the case.
- Ulwazi Olwengeziwe
- Iwaranti: To avoid voiding the warranty, do not modify the case or its components.
- Ukusekela kwezobuchwepheshe: In case of problems, contact our customer service department.
- Ukugaywa kabusha: Dispose of used devices at appropriate recycling points in accordance with local regulations.
Thank you for following these guidelines. Proper use of the case will ensure the safety and longevity of your equipment.
Amadokhumenti / Izinsiza
 |
I-Modecom Volcano Stellar Midi Computer Case [pdf] Incwadi Yeziqondiso Volcano Stellar Midi Computer Case, Stellar Midi Computer Case, Midi Computer Case, Computer Case |