I-Mitsubishi FX3U Logic Module

Ulwazi Lomkhiqizo

Umkhiqizo ubizwa nge-PLC1.ir. Kuyidivayisi yokulawula esetshenziswa ezinhlelweni ezishintshayo zezimboni. Iklanyelwe ukuxhumana nezinye izingxenye namadivayisi ahlukahlukene ukulawula nokuqapha izinqubo.

Isilungiselelo Sefekthri ye-HMI:
I-HMI (I-Human Machine Interface) ye-PLC1.ir inokulungiselelwa okuzenzakalelayo. Amapharamitha wokuxhumana azenzakalelayo ami kanje:

• Izinga le-Baud: 9600
• Izingcezu zedatha: 7
• Ubunye: Ngisho
• Misa amabhithi: 1

Imininingwane yesilawuli:
Isilawuli se-PLC1.ir sinokucaciswa okulandelayo:

• Inombolo Yokufaka Kwedijithali: 10 (Okokufaka kwe-Pulse Counter kufakiwe)
• Inombolo Yemiphumela Yedijithali: 10
• Inombolo yokokufaka kwe-Analogi: 3
• Inombolo Yemiphumela ye-Analog: 1

Ukuhambisana:
I-PLC1.ir iyahambisana ne-DOP Series HMI Controllers kanye namadivayisi e-RS-422 (DOP-B Series).

Imiyalo yokusetshenziswa komkhiqizo

Ukusethwa koxhumano:
Ukuze usebenzise i-PLC1.ir, landela lezi zinyathelo ukuze umise ukuxhumana:

1. Xhuma i-PLC1.ir kugesi usebenzisa izintambo zikagesi ezifanele.
2. Xhuma i-PLC1.ir kusilawuli se-HMI noma idivayisi ye-RS-422 usebenzisa izintambo zokuxhumana ezihambisanayo.
3. Xhuma okokufaka nokukhiphayo okudingekayo kuzimbobo zedijithali neze-analog ze-PLC1.ir.

Ukuhlela nokulungisa:
Ukuze uhlele futhi ulungiselele i-PLC1.ir, sicela ubhekisele kumanuwali yomsebenzisi eqondene nesofthiwe noma ulimi lohlelo olusetshenziswayo. Imanuwali izohlinzeka ngemiyalo enemininingwane yokuthi zibhalwa kanjani futhi zilayishwe kanjani izinhlelo, lungisa okokufaka kanye nokuphumayo, futhi usethe imingcele yokuxhumana.

Ukusebenza:
Uma i-PLC1.ir isixhunyiwe futhi isihleliwe, ingasebenza ngokunikeza okokufaka okufanele ngamadivayisi axhunyiwe. I-PLC1.ir izocubungula lokhu okokufaka futhi ikhiqize okukhiphayo okufunayo ngokusekelwe kumqondo ohleliwe.

Ukuxazulula inkinga:
Uma uhlangabezana nanoma yiziphi izinkinga noma amaphutha ngenkathi usebenzisa i-PLC1.ir, sicela ubheke isigaba sokuxazulula inkinga semanuwali yomsebenzisi noma uxhumane nokwesekwa kwamakhasimende ethu ukuze uthole usizo.

I-Mitsubishi FX3U

• Isilungiselelo Sefekthri ye-HMI:
  • Izinga le-Baud: 9600, 7, Even, 1
  • Inombolo Yesiteshi Sokulawula: 0 (ayikho inombolo yesiteshi se-PLC kuphrothokholi, ngakho-ke, ukuxhumana oku-1(HMI) kuya ku-1(PLC) kuphela okuvunyelwe.)
  • Indawo Yokulawula / Indawo Yesimo: D0 / D10

Ukuxhumana

I-RS-422 (DOP-A/AE Series) I-RS-422 (DOP-AS35/AS38/AS57 Series) I-RS-422 (DOP-B Series) I-RS-232 (DOP-B Series) I-RS-485 (DOP-B Series)

Incazelo yekheli le-PLC elifundwayo/lokubhala

Amarejista

Uhlobo	Ifomethi	Ibanga lokufunda/lokubhala	Ubude beDatha	Qaphela
	Inombolo yegama (n)
I-Axiliary Relay	Mn	M0 - M7664	Izwi	1
I-Special Auxiliary Relay	Mn	M8000 - M8496	Izwi	1
Ukudluliselwa Kwesimo	Sn	S0 - S4080	Izwi	1
I-Relay yokufaka	Xn	X0 - X360	Izwi	I-Octal, 1
Ukukhishwa Kokukhipha	Yn	Y0 - Y360	Izwi	I-Octal, 1
Isikhathi se-PV	Tn	T0 - T511	Izwi
I-16 - bit Counter PV	Cn	C0 - C199	Izwi
I-32 - bit Counter PV	Cn	C200 - C255	I-Double Word
Irejista Yedatha	Dn	D0 - D7999	Izwi
Irejista Yedatha Ekhethekile	Dn	D8000 - D8511	Izwi
Irejista Yesandiso	Rn	R0 - R32767	Izwi

Oxhumana nabo

Uhlobo	Ifomethi	Ibanga lokufunda/lokubhala	Qaphela
	Inombolo encane. (b)
I-Axiliary Relay	Mb	M0 - M7679
I-Special Auxiliary Relay	Mb	M8000 - M8511
Ukudluliselwa Kwesimo	Sb	S0 - S4095
I-Relay yokufaka	Xb	X0 - X377	I-Octal
Ukukhishwa Kokukhipha	Yb	Y0 - Y377	I-Octal
Ifulegi lesikhathi	Tb	T0 - T511
I-Counter Flag	Cb	C0 - C255

QAPHELA

1. Ikheli ledivayisi kufanele libe ukuphindaphinda okungu-16.

I-V1.03 Ukubuyekezwa kukaJanuwari, 2016

Amadokhumenti / Izinsiza

I-Mitsubishi FX3U Logic Module [pdf] Imaniwali yosebenzisayo PLC1, DOP Series, FX3U Logic Module, FX3U, Logic Module, Module

Izithenjwa

• Imaniwali yosebenzisayo