microtech DESIGNS EL00M e-Loop Mini Presence Mobile

• Imvamisa: 433.39 MHz
• Ukuphepha: Ukubethela kwe-128-bit AES
• Ibanga: kufika kumamitha angu-30
• Impilo yebhethri: kuze kufike eminyakeni emi-3
• Uhlobo lwebhethri: I-AA 1.5V 3000 mAh Lithium Battery x2 (ifakiwe)
• Uhlobo lwebhethri lokushintshwa: I-Eveready AA 1.5V ibhethri ye-lithium x

I-e-LOOP Mini Fitting Imiyalelo

Ukufakwa ngezinyathelo ezi-3 ezilula

Inketho 1: Ikhodi yebanga elifushane enozibuthe

1. Nika amandla i-e-Trans 50, bese ucindezela bese ukhulula inkinobho ethi CODE.
2.  Beka umazibuthe kwikhefu le-CODE ku-e-Loop; i-LED ephuzi izokhanya, futhi i-LED eluhlaza okwesibhakabhaka ku-e-Trans 50 izokhanya izikhathi ezingu-3.
3. Amasistimu manje amatanisiwe, futhi ungakwazi ukususa uzibuthe.

Inketho 2: Uhlu olude lwekhodi ngozibuthe (kufika kumamitha angama-50)

1. Nika amandla i-e-Trans 50, bese ubeka uzibuthe endaweni yokuphuma yekhodi ye-e-Loop; ikhodi ephuzi i-LED izokhanya kanye.
2. Susa uzibuthe, futhi i-LED izofika iqinile. Hamba uye ku-e-Trans 50 bese ucindezela bese ukhulula inkinobho ethi CODE.
3. I-LED ephuzi izokhanya, futhi i-LED eluhlaza okwesibhakabhaka ku-e-Trans 50 izokhanya izikhathi ezingu-3. Ngemuva kwemizuzwana engu-15, i-LED yekhodi ye-e-loop izocisha.

Endleleni yokungena

1. Bhekana nomcibisholo ku-base plate ngasesangweni.
2. Usebenzisa i-5mm yokumba ukhonkolo kakhonkolo, bhoboza izimbobo ezimbili ezigxunyekayo ezijule ngo-55mm.
3. Sebenzisa izikulufu zikakhonkolo ezingu-5mm ezihlinzekwe ukulungisa indlela yokungena. (Bheka umdwebo ongakwesokudla)
4. Faka i-e-loop Mini ku-base plate usebenzisa izikulufu ezingu-4 hex ezinikeziwe, uqinisekise ukuthi umcibisholo nawo ukhomba ngasesangweni ukuze uqondaniswe.
5. I-e-Loop izosebenza ngemva kwemizuzu emi-3.

QAPHELA: Qinisekisa ukuthi izikulufu ze-hex ziqinile njengoba lokhu kuyingxenye yenqubo yokuvala amanzi.

KUBALULEKILE: Ingangeni eduze kwevolumu ephezulutagizintambo ze-e; lokhu kungase kuthinte ukutholwa kwemoto ye-e-Loop namandla ebanga lomsakazo.

Imibuzo Evame Ukubuzwa (FAQ)

• Q: Ibhethri lihlala isikhathi esingakanani?
  A: Impilo yebhethri ifika eminyakeni emi-3 kanye ne-AA 1.5V 3000 mAh Lithium Amabhethri afakiwe.
• Q: Buyini ububanzi besistimu?
  A: Uhlelo lunobubanzi obufika kumamitha angu-30 ukuze kutholwe imoto engenantambo.
• Q: Ngiyibhangqa kanjani i-e-Loop ne-e-Trans 50?
  IMP: Ungawabhangqa usebenzisa ikhodi yebanga elifushane ngozibuthe noma ikhodi yebanga elide enozibuthe ngokwemiyalo enikeziwe.

Imininingwane

• Imvamisa: 433.39 MHz
• Ukuphepha: ukubethela kwe-128-bit AES
• Ububanzi: kufika ku-30 ​​m
• Impilo yebhethri: kufika eminyakeni emi-3
• Uhlobo lwebhethri: AA 1.5V 3000 m/a Lithium Battery x2 (ifakiwe)
• Uhlobo lwebhethri lokushintshwa: I-Eveready AA 1.5V ibhethri ye-lithium x2

I-e-LOOP Mini Fitting Imiyalelo

Ukufakwa ngezinyathelo ezi-3 ezilula

• Isinyathelo 1 - Ukufaka ikhodi e-LOOP Mini version 3.0
• Inketho 1. Ukubhala ngekhodi kwebanga elifushane ngozibuthe
  Nika amandla i-e-Trans 50, bese ucindezela bese ukhulula inkinobho ethi CODE. I-LED eluhlaza okwesibhakabhaka ku-e-Trans 50 izokhanya, manje beka uzibuthe ku-CODE recess ku-e-Loop, i-LED ephuzi izokhanya, futhi i-LED eluhlaza okwesibhakabhaka ku-e-Trans 50 izokhanya izikhathi ezingu-3. Amasistimu manje amatanisiwe, futhi ungakwazi ukususa uzibuthe.
• Inketho 2. Uhlu olude lokubhala ngekhodi ngozibuthe (kufika kumamitha angama-50)
  Phakamisa i-e-Trans 50, bese ubeka uzibuthe endaweni yokuphuma yekhodi ye-e-Loop, ikhodi ephuzi i-LED izokhanya uma manje ikhipha uzibuthe bese i-LED iqine, manje dlulela ku-e-Trans 50 bese ucindezela. bese udedela inkinobho ethi CODE, i-LED ephuzi izokhanya futhi i-LED eluhlaza okwesibhakabhaka ku-e-Trans 50 izokhanya izikhathi ezi-3, ngemva kwemizuzwana engu-15 i-e-loop code LED izocisha.

Isinyathelo sesi-2 - Ukufaka i-e-LOOP Mini base plate endleleni yokungena

1. Bhekana nomcibisholo ku-base plate ngasesangweni. Usebenzisa i-5mm yokumba ukhonkolo kakhonkolo, bhoboza izimbobo ezimbili ezigxunyekayo ezingaba ngu-55mm ukushona, bese usebenzisa izikulufu zikakhonkolo ezingu-5mm ezihlinzekwe ukulungisa indlela yokungena.

Isinyathelo sesi-3 - Ukufaka i-e-LOOP Mini ku-base plate

(Bheka umdwebo ongakwesokudla)

1. Manje faka i-e-loop Mini ku-base plate usebenzisa izikulufu ezingu-4 hex ezinikeziwe, wenze isiqiniseko sokuthi umcibisholo nawo ukhomba ngasesangweni (lokhu kuzoqinisekisa ukuthi ukhiye uqondaniswe). I-e-Loop izosebenza ngemva kwemizuzu emi-3.
   QAPHELA: Qinisekisa ukuthi izikulufu ze-hex ziqinile njengoba lokhu kwenza ingxenye yenqubo yokuvala amanzi.
   KUBALULEKILE: Ungalinge ulingane nevolumu ephezulutagamakhebula e-e, lokhu kungase kuthinte ukutholwa kwemoto ye-e-Loop namandla ebanga lomsakazo.

Imiklamo ye-Microtech
enquiries@microtechdesigns.com.au

microtechdesigns.com.au

Amadokhumenti / Izinsiza

microtech DESIGNS EL00M e-Loop Mini Presence Mobile [pdf] Incwadi Yeziqondiso EL00M e-Loop Mini Presence Mobile, EL00M, e-Loop Mini Presence Mobile, Mini Presence Mobile, Presence Mobile, Mobile

Izithenjwa

• Imaniwali yosebenzisayo