I-MR BB V2 Esabalalisiwe I-LED Batten
Imanuwali Yeziqondiso
I-ML-MRBBV2-60 Diffused LED Batten
YIKWAZISA
Hlanganisa oku-2 noma ngaphezulu ukuze wenze ibhethi ende e-1.
X JOINER
Ukuxhumana okungapheli
Ibhethi ye-LED ehlukanisiwe
I-BB V2 isifikile! Idizayini yokuqala ye-BB enokufakwa okusikwe ngaphambili komsele, indawo enkulu yokungena emuva emaphakathi engu-25mm kanye nebhulokhi yetheminali ye-PA16 isasele kodwa ukwakheka okusha kwesisindo esilula kusonga umkhiqizo ngejazi lempushana elithuthukisiwe elithuthukisiwe.
Inzwa ye-microwave ongayikhetha noma ikhithi yezimo eziphuthumayo ingangezwa ekufakeni ngezindlela ezilula ze-plug-and-play okwenza ukufaka okukodwa kulungele imisebenzi eminingi ehlukahlukene. Ukufakwa kungahlanganiswa futhi kusetshenziswa izijoyini ze-X okwenza uxhumo 'olungapheli' noma ukukhanyisa kwesitayela se-trunking kube lula ukukufaka izintambo futhi kucishe. Ifanele ukumiswa, indawo ephezulu, i-trunking, nokufakwa okuqondile.
ULWAZI LOBUCHWEPHESHE
Idatha ingashintshwa, sicela uvakashele yethu webisayithi ukuze uthole imininingwane yakamuva: melec.com.au
| I-ML-MRBBV2-60 | I-ML-MRBBV2-120 | |
| Ingqikithi Amandla | 10/20W* | 20/38W* |
| Lumen Okukhiphayo: | 10W: WW 1200LM NW 1250LM W 1250LM 20W: WW 2200LM NW2500LM W 2400LM |
20W:WW 2600LM NW2700LM W2700LM 38W: WW4750LM NW5130LM W4940LM |
| Umbala Isimo: | 3000K (WW) | 4000K (NW) | 5700K (W) | |
| Isilinganiso se-IP: | IP20 | |
| I-CRI: | 80 | |
| Ukusebenza kahle: | 10W: UKUFIKA KU-125LM/W 20W: UKUFIKA KU-125LM/W |
20W: UKUZE KUYA KU-135lm/W 38W: UKUZE KUYA KU-135lm/W |
| Beam I-engeli: | 120° | |
| Okokufaka kwamanje | 240V 500mA | 240V 900mA |
| Inrush Okwamanje | 24A | 18A |
| Ukuvuza Komhlaba okwamanje | <0.5mA @ 240Vac | |
| Kucimeke: | Cha | |
| Amandla Hlinzeka: | 240V Umshayeli ohlanganisiwe | |
| Isici samandla | 0.9 | |
| Imvamisa | 50/60Hz | |
| Isilinganiso Impilo: | 50,000hrs** | |
| Ubukhulu: | 620.4 x 74 x 61.9mm | 1220.4 x 74 x 61.9mm |
| Isisindo | 0.94kg | 1.68kg |
| ITemp Esebenzayo | -10°C kuya ku-45°C | |
| Ukuhambisana | SAA | |
| Ukuxhumana | I-PA16 Terminal block | |
| I-LED I-chip Ibhrendi | I-SMD2835 | |
| Izinto zokwakha: | Stampumzimba wensimbi we-ed, i-PC diffuser, i-ABS Endcaps | |
| Isiqinisekiso: | IMINYAKA ENGU-5 | |
*Isamba samandla asetshenzisiwe kuhlanganisa nomshayeli
** Isilinganiso sempilo sibalwa ngokwesilinganiso seminyaka yokuphila elindelwe
UMHLAHLANDLELA WOKUFAKA
- Ngokucindezela amathebhu aseceleni ezinhlangothini ezifanele IN hlukanisa “phezulu” kokufaka “kusisekelo”.
- Ukusebenzisa izindlela zokulungisa ezifanele lungisa “isisekelo” endaweni edingekayo.
- Faka intambo ngocingo ngokuhambisana namatheminali amakiwe (isithombe 1).
- Setha ukushintshela komshayeli kusilungiselelo osifunayo: Imodi Eyodwa/Iwele (isithombe 2) Ukusetha okuzenzakalelayo komshayeli yi-Twin Mode.
- Setha okukhiphayo kombala okufunayo “ngokushintsha kwesikhethi” ohlangothini oluphumayo lomshayeli (isithombe 3).
- Xhuma i-push connector kumshayeli uqinisekisa ukuthi i-polarity ilungile (isithombe 3). Qinisekisa ukuthi i-Earth wire nayo ixhunyiwe.
- Thinta "phezulu" ku-"base" endaweni yayo yangempela.
- Qinisekisa ukuthi zonke izixhumi zentwasahlobo ezi-4 zisendaweni ngokuvikelekile zibambe “phezulu” endaweni (isithombe 4).
IZINTO ONGAZITHANDELA EZITHOLAKALA:
I-ML-BBV2-60 noma 120 EM – amakhithi ezimo eziphuthumayo, ML-BBV2SN – Inzwa ye-Microwave (kokubili ipulaki nokudlala), ML-MRBBV2-JN – X joiner, ML- MRBBV2-SUSKIT – Suspension kit
INSIMU UKUFAKWA
| okokufaka | I-Operating Voltage Ibanga | 120-277V AC 50Hz/60Hz |
| Kulinganiswe ngoVoltage | 220-240V AC, 50Hz/60Hz | |
| Yima ngamandla | ≤0.5W | |
| Ukuhlolwa okuPhezulu | L–N: 1kV | |
| okukhiphayo | Imodi yokusebenza | ON/OFF umsebenzi |
| Uhlobo Lomthwalo | I-inductive noma i-Resistive | |
| Layisha Amandla | 400W (Inductive); 800W (Ayizwani) | |
| Ubukhulu. Amandla Wokukhuphuka | 10I-relay; 30A (50% Ipeak, twidth =500uS, 230Vac umthwalo ogcwele, isiqalo esibandayo); |
|
| Amapharamitha enzwa | Imvamisa Yokusebenza | 5.8 GHz ±75 MHz, Ibhendi ye-ISM. |
| Amandla okudlulisa | 0.5mW Ubukhulu | |
| Bamba isikhathi | 5S/30S/90S/5Min (ngamakhodi amabili okudayela) 10S/90S/3Min/10min (ngekude i-MH03) |
|
| Ukuzwela kokutholwa | 100%/75%/50%/25% (ngamakhodi amabili okudayela) 100%/50% (nge-MH03 ekude) |
|
| Inzwa yokukhanya kwasemini | 25lux/Khubaza (ngekhodi yokudayela eyodwa) 5lux/15lux/50lux/Disable (nge-MH03 ekude) |
|
| Ithola Irediyasi | 3m (ukuphakama okufakwayo 3-4m); > 2m (ubude bokukhweza 6m); | |
| Ukuphakama Okunyukayo | 2.5-6m, futhi 4m ingeye-max. ithola irediyasi | |
| Ithola i-engeli | 150° (Kufakwe udonga) | |
| Okunye | Isilinganiso se-IP | IP20 |
| Isigaba sokuvikela | Ikilasi II |
INSIMU UKUFAKWA
IPHENINI LOKUTHOLA
1) Ukufakwa kophahla
*Kungu-100%/75% kuphela ukuzwela okusebenzayo okusebenzayo uma kufakwe ku-6m ukuphakama. Ukuzwela okungu-25%/50% akukwazi ukubona isiginali yokunyakaza.
2) Ukufakwa odongeni
UBUHLU BOKUTHOLA (UKUBONA)
Ibanga lokutholwa igama elisetshenziswa ukuchaza indawo yokuthola ekhiqizwa phansi ngemva kokukhweza ukukhanya kwenzwa
Uma usebenzisa lo mkhiqizo sicela ulungise ukuzwela endaweni efanele oyidingayo. Okulandelayo kungase kuvimbele ukutholwa kokunyakaza ekusebenzeni ngendlela evamile: amaqabunga aphephethayo, amakhethini, izilwane ezincane noma igridi kagesi nezinto zikagesi. Uma lokhu kufanele kwenzeke, vele uzame ukwehlisa ukuzwela ngendlela efanele bese ukuvivinya.
| Indawo yokutholwa | ||
| S1 | S2 | |
| 100% |  UP |
UP |
| 75% |  PHANSI |
UP |
| 50% | UP |
PHANSI |
| 25% | PHANSI |
PHANSI |
Inzwa yeMINI
*Khubaza” kusho inzwa yokukhanya kwasemini ayisebenzi. izokhanyisa uma ukunyakaza kutholiwe kungakhathaliseki ukukhanya kwe-ambient.
| Ukukhanya kwasemini | |
| S5 | |
| 25 Lux | UP |
| Khubaza | PHANSI |
UKUBEKA ISIKHATHI (BAMBA ISIKHATHI)
Ukukhanya kungasethwa ukuthi kuhlale KUVULIWE izikhathi zesikhathi phakathi kwamasekhondi angu-5 ukuya kwamaminithi angu-5. Noma yikuphi ukunyakaza okutholwe ngaphambi kokuthi kudlule lesi sikhathi kuzoholela ekuqalweni kabusha kwesikhathi.
Lungisa amaswishi e-dip ngokuya ngezilungiselelo zesikhathi osifunayo eziboniswe eshadini elingezansi.
NGICELA UQAPHELE!
Ngemva kokuba ukukhanya KIVALIWE kuthatha cishe imizuzwana emi-4 ngaphambi kokuthi ikwazi ukuqala ukubona ukunyakaza futhi.
Isibani sizoVULA kuphela ekuphenduleni ukunyakaza okutholiwe uma lesi sikhathi sesidlulile.
| UKUBEKA ISIKHATHI | ||
| S3 | S4 | |
| 5S | UP |
UP |
| 30S | PHANSI |
UP |
| 90S | UP |
PHANSI |
| 5MIN | PHANSI |
PHANSI |
Khipha umsebenzi
Vala, vula ngokushesha inzwa ye-VULA/VALIWE izikhathi ezingu-3 (UKUVULIWE-ON-OFFON) phakathi kwamasekhondi angu-2 ukuze ukhiphe umsebenzi wezinzwa. Isibani sizocwayiza izikhathi ezi-3 bese sivula. Vala futhi uvule futhi ukuze ubuyisele umsebenzi wenzwa.
Ukuqaliswa
Ngemva kokukhanyisa, inzwa ivula ngokuzenzakalelayo ukukhanya ngokukhanya okungu-100%. Ngemuva kwamasekhondi angu-10, ivala isibani. Ngesikhathi sokuqalisa, inzwa ayikwazi ukubona ukunyakaza.
INSIMU UKUFAKWA
- Ngokucindezela amathebhu aseceleni ezinhlangothini ezifanele IN hlukanisa “phezulu” kokufaka “kusisekelo”.
- Ukusebenzisa izindlela zokulungisa ezifanele lungisa “isisekelo” endaweni edingekayo.
- Faka intambo ngocingo oluhambisana namatheminali amakiwe (isithombe 1)
- Setha ukushintshela komshayeli kusilungiselelo osifunayo: Imodi Eyodwa/Iwele (Ukusetha okuzenzakalelayo komshayeli kuyimodi ye-Twin).
- Setha okukhiphayo kombala okufunayo “ngokushintsha kwesikhethi” ohlangothini oluphumayo lomshayeli.
- Faka inzwa esisekelweni ezimbotsheni ezithile zokukhweza. (isithombe 2), ukuqinisekisa ukuthi i-node ingakwesokudla (isithombe 3)
- Xhuma izixhumi ezicindezelayo zenzwa kuzixhumi ezihambisanayo zomshayeli nokufaka (bheka isithombe sesi-6 uqinisekisa ukuthi i-polarity ilungile).
- Susa ngokuphephile i-sensor node knockout "phezulu" uqinisekise ukuthi ayilimazi i-LED PCB (isithombe 7).
- Chofoza "phezulu" ku-"base" endaweni yayo yasekuqaleni, uqinisekise ukuthi i-sensor node iyabonakala ngokungqongqoza (isithombe 9)
- Qinisekisa ukuthi zonke izixhumi zentwasahlobo ezi-4 zisendaweni ngokuvikelekile zibambe “phezulu” endaweni (isithombe 9).
UKUFAKA OKUPHUTHUMAYO
SICELA UFUNDE IMIYALELO NGAPHAMBI KOKUQALA UKUFAKA FUTHI UYIGCINE UMA UYI-REFERERE YAKUSASA.
UKUHLOLA
Ukukhanyisa kwezimo eziphuthumayo kufanele kuhlolwe futhi kuhlolwe njalo ngokuhambisana nemithetho nemithetho. Siphakamisa okulandelayo njengokuncane.
NGICELA UQAPHELE!
Ngemva kokufaka kokuqala sicela uvumele amahora angu-24 ukuze uqinisekise ukuthi ibhethri ishajwe ngokugcwele ngaphambi kokuqala ukuhlola.
- Hlola nsuku zonke ukuthi inkomba ye-LED ye-charge iyasebenza.
- Nyanga zonke, phazamisa amapayipi amakhulu isikhathi esifushane futhi uhlole izibani ze-LED.
- Isheke lonyaka lezinyanga eziyi-12, ukuhlolwa kobude besikhathi esigcwele (isikhathi eside kunamahora ama-2). Amabhethri noma okokufaka kufanele kushintshwe uma ehluleka ukuhlala amahora ama-2.
- Gcwalisa ishidi lokurekhoda ekufakweni futhi ugcine ukulungiswa file.
- Buyekeza file namarekhodi okuhlola aqhubekayo ukuze ahlolwe yisikhulu sezomlilo noma omunye umuntu ogunyazwe ngokufanelekile.
IDIAGRAM WIRING
| I-ML-MRBBV2-EM | |
| Ukunikezwa okulinganiselwe umthamotage | 220 ~ 240VAC |
| Imvamisa yama-main | 50/60Hz |
| Okokufaka okuyinhloko okwamanje, imiz | 25mA |
| Okuyinhloko okokufaka okwamanje, ubuningi | 38mA |
| Amandla okufaka ekusebenzeni kwamapayipi amakhulu, imiz | 3.1W±10% |
| Amandla okufaka ekusebenzeni kwamapayipi amakhulu, ubuningi | 3.8W±10% |
| Ibhethri isikhathi sokukhokhisa | 24h |
| I-ambient izinga lokushisa ta | 0°C~55°C |
| Ubukhulu. Izinga lokushisa lebhokisi tc | 65°C |
| Ibhethri | I-LiFePO4 6.4V 4500mAh(3H) |
| Ibhethri ubude besikhathi | Amahora angu-3 |
| IP ukukala | IP20 |
| Imodi yokuhlola | Ukuzihlola |
ISAZISO
Isimo sephutha:
Uma iphutha litholwa, inkomba ye-LED ishintshela ku-RED. Uma iphutha lilungisiwe sicela uxhume kabusha ibhethri ngemva kokuthi amapayipi aphambili ecishiwe, inkomba ye-LED ishintsha ngokushesha ibuyele kokuthi OKULUHLAZA lapho amandla amapayipi avuliwe.
ISAZISO
Ibhethri lihlulekile ukuhlolwa kobude besikhathi: Ngemva kokushintshana kwebhethri futhi ubambe inkinobho (>10S) ukuze usethe kabusha isibali sikhathi, isibonisi se-LED sishintshela kokuthi OKULULUHLAZA.
UKUFAKA OKUPHUTHUMAYO – UKUHLOLA/UKUKHOMISA (UKUHLOLA UKWAKHO)
Hlola Ukusebenza Kokushintsha
- Ukucindezela okufushane (>1s) enkinobho kuqala ukuhlolwa komsebenzi okuthatha imizuzwana emi-5 (Umthamo webhethri kufanele ube ngaphezu kuka-5% = 30mins ukushajwa)
- Ukubamba phansi inkinobho(>10s) kusetha kabusha isibali sikhathi(Ukusetha kabusha uhlelo)
Ukuhlolwa Okusebenzayo
Imizuzwana emi-5 ubude, ukuhlolwa kokusebenza ngakunye kwezinsuku eziyi-7 kusiza ukuhlola ukusebenza kweyunithi yezimo eziphuthumayo, amabhethri nemojula ye-LED.
Isaziso:
- Uma kwenzeka ukwehluleka kokunikezwa kwamapayipi ngesikhathi ukuhlolwa kokusebenza kusaqhubeka, ukuhlola kuzohlehliswa futhi isistimu izongena ekusebenzeni okuphuthumayo. Ngemva kokubuyiselwa kokuphakelwa kwamapayipi amakhulu, ukuhlolwa kokusebenza kuhlehlisiwe kuzoqala kabusha ngokuzenzakalelayo ngokushesha uma izimo zivuma.
Ukuhlolwa kobude besikhathi
- Ukuhlolwa kobude besikhathi sokuqala: Ukuhlolwa kuzokwenziwa ngemva kwamahora ayi-16 ngqo ngemva kokufakwa kokuqala.
- Ukuhlolwa kwesigamu sonyaka: Ukuhlolwa kuzokwenziwa ezinsukwini eziyi-180 - 182.
- Ukuhlolwa kobude besikhathi samahora angu-2 ezinsukwini zokuqala eziyi-180-182 kuhlola umthamo wamabhethri.
- Ukuhlolwa kobude besikhathi samahora angu-1.5 ezinsukwini zokuqala eziyi-180-182 kuhlola umthamo wamabhethri.
Isaziso:
- Ukuhlolwa kobude besikhathi kuzoqalwa kuphela lapho ibhethri selishajwe ngokugcwele, uma kwenzeka ukwehluleka kokunikezwa kwepayipi elikhulu ngesikhathi ukuhlolwa kobude besikhathi kuqhubeka, ukuhlola kuzohlehliswa futhi isistimu izongena ekusebenzeni okuphuthumayo. Ngemva kokubuyiselwa kokuphakelwa kwamapayipi amakhulu, ukuhlola ubude besikhathi kuhlehlisiwe kuzoqala kabusha ngokuzenzakalelayo lapho ibhethri selishajwe kabusha ngokugcwele.
- Inkomba izobe ibaneka kancane Ngokuluhlaza zingakapheli izinsuku ezi-5 uma ukuhlolwa kobude besikhathi kwenziwa ngempumelelo.
Inkomba yesistimu ye-LED:
| Isibonisi se-LED | Isibonisi se-LED | Isimo | Incazelo |
 |
Okuluhlaza Okuphakade | Okulindile ,Isistimu ILUNGILE | I-Mains Operation, ibhethri lishajiwe |
 |
Okuluhlaza Okukhanyayo Okusheshayo (0.25s ku-0.25s off) | Ukuhlolwa komsebenzi kuyaqhubeka | Ukuhlolwa komsebenzi kuyaqhubeka |
 |
Okuluhlaza okukhanyayo okunensayo (1s on 1s off) | Ukuhlolwa kobude besikhathi kuyaqhubeka | Ukuhlolwa komsebenzi kuyaqhubeka |
 |
Okubomvu Okuphakade | Lamp ukwehluleka | Vula Isekhethi noma Isekhethi emfushane noma ukwehluleka kwe-LED |
 |
Ukukhanya Okubomvu Okusheshayo (0.25s ku-0.25s off) | Ukuhluleka komthamo webhethri | Ukuhlola ubude besikhathi kwebhethri kwehlulekile |
 |
Okubomvu okukhanyayo okunensa (1s on 1s off) | Iphutha lebhethri | Umthamo webhethri ongalungiletage noma I-Short circuit noma i-Open Circuit |
 |
Okuluhlaza futhi Okubomvu kuvaliwe | Ukusebenza Kwebhethri | Imodi yesimo esiphuthumayo:Amapayipi anqanyuliwe noma ahlulekile |
UKUFAKA OKUPHUTHUMAYO
- Ngokucindezela amathebhu aseceleni ezinhlangothini ezifanele IN hlukanisa “phezulu” kokufaka “kusisekelo”.
- Susa isiphetho esisodwa (lokhu kuzosetshenziselwa i-FPC ephuthumayo) (Isithombe 1)
- Ukusebenzisa izindlela zokulungisa ezifanele lungisa “isisekelo” endaweni edingekayo.
- Faka intambo ngocingo oluhambisana namatheminali amakiwe (isithombe 2)
- Setha ukushintshwa komshayeli kusilungiselelo osifunayo: Imodi Eyodwa/Iwele. Ukulungiselelwa komshayeli okuzenzakalelayo yi-Twin Mode.
- Setha okukhiphayo kombala okufunayo “ngokushintsha kwesikhethi” ohlangothini oluphumayo lomshayeli.
- Faka isiguquli esiphuthumayo nebhethri esisekelweni kumathebhu athile okugoba (Izithombe 3 no-4)
- Qinisekisa ukuthi amathebhu okugoba okuguqula izimo eziphuthumayo abheke phambili nokuthi amathebhu okugoba ebhethri agobekelwe emuva. (bheka isithombe 5)
- Xhuma izixhumi ezicindezelayo zekhithi yezimo eziphuthumayo kuzixhumi ezihambisanayo zomshayeli nokufaka (bheka izithombe 6, 7, 8 ngezansi uqinisekise ukuthi ukugqama kunembile).
- Ukufaka inkinobho yokuhlola kanye nokukhanya kwenkomba ye-FPC, susa i-knockout encane engxenyeni engaphezulu yesiphetho sokugcina. (Isithombe 9)
- Pefa ifilimu yokuvikela ukuze uveze ukusekela okunamathelayo okungu-3M kwe-FPC futhi unamathisele inkinobho ebusweni bangaphandle kwesiphetho.(Isithombe 10)
- Xhuma izixhumi ze-picoblade ze-FPC nezintambo ezixhuma emuva kusiguquli esiphuthumayo. (Isithombe 11)
- Xhuma isixhumi sowesilisa se-FPC kusixhumi sowesifazane esixhuma emuva kusiguquli esiphuthumayo. (Isithombe 12)
- Phinda ufake i-endcap nge-FPC uyibuyisele ku-BB. (Isithombe 13)
- Thinta "phezulu" ku-"base" endaweni yayo yangempela. (Isithombe 14)
UKUFAKA OKUPHUTHUMAYO
NGICELA UQAPHELE!
Qaphela imfuneko yokulahla Imfucuza Kagesi & Nezisetshenziswa Kagesi ngokuhlukana nemfucuza yasendlini (i-WEEE ephawulwe ngophawu oluphambanisiwe lwe-wheelie bin).
Ulwazi lobuchwepheshe bomkhiqizo kanye nokucaciswa kungashintsha ngokuhamba kwesikhathi ngaphandle kokwaziswa kwangaphambili. Ukuze uthole ukwaziswa kwamuva kwezobuchwepheshe sicela uvakashele yethu web indawo www.melec.com.au
NGICELA UQAPHELE
KUMELE KUFAKWE NGU-ELECTRICIAN ONELAYISENSI
- Funda imiyalelo ngokucophelela ngaphambi kokuzama ukufaka okokufakela. Gcina lo mhlahlandlela ukuze ubhekisele esikhathini esizayo
- Nqamula amandla ngaphambi kokufaka noma ukusevisa
- Ungandisi ivolumu ephansitagamakhebuli e-e aphuma ekuphumeni kwamandla kagesi
- Zonke izingxenye akumele zigcizelelwe ngomshini
- Qaphela ukuthi ungalimazi noma ucekele phansi izindlela ze-conductive ebhodini lesifunda
- Landela zonke izilinganiso zikagesi nezokuphepha ezifanele (kuhlanganise ne-AS3000)
- I-polarity kagesi elungile kufanele ibhekwe njengoba i-polarity engalungile ingase ibulale umkhiqizo futhi ayikhaviwe ngaphansi kwewaranti.
- Ukulimala ngokugqwala ngeke kuhlonishwe njengesimangalo sesici esibalulekile. Kuyisibopho somsebenzisi ukunikeza isivikelo esifanele ezintweni ezilimazayo njengomswakama, ukujiya nezinye izinto eziyingozi.
ISIQINISEKISO SAMAHHALA ESIKHATHINI
KUPHELELWE EMALUNGU KUPHELA
ISIQINISEKISO SAMAHHALA ESIKHATHINI IMINYAKA emi-3
IHLANGANISA IINGXENYE NOMSEBENZI
Ngokuhambisana newaranti yakho evamile yomkhiqizoInguqulo 2
Amadokhumenti / Izinsiza
 |
I-MELEC ML-MRBBV2-60 I-LED Batten Esabalalisiwe [pdf] Iziyalezo I-ML-MRBBV2-60 Diffused LED Batten, ML-MRBBV2-60, Diffused LED Batten, LED Batten |
