I-meitav-tec PYROCON19 Isilawuli kanye Nephaneli Yesixhumi Esibonakalayo Somsebenzisi
Isingeniso
I-PYROCON19-TRACE inikeza ukulawula okuhlakaniphile nokulula kwe-HEAT TRACING SYSTEMS.
Ingasebenzisa izindawo zokushisisa ezingafika kwezi-4 kanye nendawo eyodwa yokusiza, ngendlela ekhethekayo yokulandelanisa. Izicelo ezijwayelekile zihlanganisa amapayipi, ama-valve nama-gutters.
Isikrini se-LCD esikhanyiselwe ngemuva sinikeza isikhombimsebenzisi esigcwele nolwazi esimweni sohlelo.
Ukusetshenziswa kwezindawo eziningana stagi-gering ivumela ukumboza ubude bamapayipi amade ngamandla kagesi atholakala kancane.
I-PYROCON19-TRACE inikeza izinketho ezahlukene zokusebenza nezinhlelo ezifana:
- Izikali zokushisa ezishintshekayo (°F noma °C)
- Zombili izindlela zokuzenzakalela kanye nezokuzenzela
- Umjikelezo wama-heaters alungisekayo kanye nezikhathi zokuhlukana
- Amahitha alungisekayo abambezeleka
- Umkhawulo wokushisa we-ambient olungisekayo olungisekayo wokumisa izifudumezi (ukuvala ngaphandle)
- Umkhawulo wokushisa wokonga amandla
- Indawo yokuthumela/yokuhlola
I-PYROCON19-TRACE Isakhiwo sesistimu esijwayelekile nge-PYROBOX3/5
Umdwebo wezintambo wokucushwa kokuma wedwa
Ixhuma izigqila ze-PYROCON19-TRACE (inketho)
| Inombolo ye-PYROCON19-TRACE
Izigqila |
OkaMaster I-MAC
Amakheli |
Okwezigqila I-MAC
Amakheli |
| Kufika ku-3 | 1-63 | 14-16 |
Lezi zigqila zingaxhunywa ngokuqondile kumatheminali e-A2,B2 ku-PYROCON19-TRACE noma ngokusebenzisa amabhokisi okuhlanganisa amaningi e-PYRO-JBOX ane-transformer eyakhelwe ku-50VA, 110~24VAC - Ivumela ukuxhuma futhi inike amandla izigqila ezi-3.
Sicela ubhekisele kupharamitha kachwepheshe P08 yekheli le-MAC likaSalve. kanye nepharamitha P11 yokucushwa kwe-Master/Slave
Imiyalelo yokusebenza
UKUVULA NOKUVALA uhlelo
- Cindezela bese ubamba inkinobho ethi [VULA] imizuzwana engu-0.5 ukuze UVULA noma UVALE uhlelo.
- Amagama athi “VULIWE” noma “VALIWE” azovela esibukweni.
Ukukhetha izinga lokushisa
- Cindezela inkinobho ethi [+] ukuthola i-Celsius.
- Cindezela inkinobho ethi [-] ukuze uthole iFahrenheit.
Ukukhetha Imodi ye-Othomathikhi noma Yezandla
Cindezela inkinobho ethi [SELECT] ukuze ushintshe phakathi kwamamodi:
“Okuzenzakalelayo” Ukushisisa kuzoqala futhi kuzimise ngokuzenzakalelayo kuye ngendawo emisiwe namazinga okushisa e-ambient.
“Imanuwali ivuliwe” Ukushisisa kuzoqala kungakhathaliseki indawo emisiwe namazinga okushisa e-ambient futhi kuzoma ngemva kwesikhathi esisethiwe (pls. bheka isigaba esithi “IVULIWE Imanuwali” kuzilungiselelo zobuchwepheshe).
Qaphela: Imodi izohlala ibuyela kokuthi “Okuzenzakalelayo” ngemva kokucisha iyunithi nokuthi VULA.
Izifudumezi inkomba
Isithonjana seqhwa leqhwa kanye nenkomba yesikhathi sedijithali
Isithonjana esiqinile seqhwa sizovela ekubonisweni ngesikhathi sokusebenza kwezifudumezi ezivamile.
Isithonjana seqhwa elicwayizayo sizovela esibonisini ngesikhathi izifudumezi zivaliwe noma uma imodi eyenziwa ngesandla yenziwe yasebenza. Iwashi ledijithali lizobala lehle isikhathi esisele kuze kucishwe amahitha.
Isithonjana seqhwa sizonyamalala ekubonisweni inqobo nje uma izifudumezi zivaliwe.
Izilungiselelo zikachwepheshe
Sebenzisa imodi yezilungiselelo zochwepheshe ukuze view bese ulungisa amapharamitha alandelayo:
- Iphoyinti lesethi yezinga lokushisa le-P01
- P02 Yehlisa umkhawulo wezinga lokushisa elizungezile ukuze umise izifudumezi
- P03 Ukubambezeleka kwesikhathi ngaphambi kokumisa ama-heater
- P04 NGESIKHATHI semodi yezandla
- Isikhathi somjikelezo wama-heaters we-P05 / Isikhathi sokuhlukanisa
- I-logic ye-P07 Heaters yokuphumayo
- Ikheli le-MAC le-P08 le-BMS nele-Master-Slaves
- I-P09 Imodi Yokugunyaza / Yokuhlola
- P11 Inkosi/Isigqila
- I-P15 Ukulinganisa inzwa yokushisa Offset Buyisela okumisiwe
Faka imodi yezilungiselelo zochwepheshe
- Hambisa inkinobho ye-DIP i-S1 etholakala ohlangothini olungemuva lwe-thermostat uye endaweni ethi ON.
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye ukuze uye phambili kupharamitha kachwepheshe elandelayo.
- Cindezela izinkinobho ezithi [SELECT] kanye nezithi [-] kanyekanye ukuze ubuyele kupharamitha yochwepheshe yangaphambilini.
Londoloza izinguquko bese uphuma kumodi yezilungiselelo zochwepheshe
Hambisa inkinobho ye-DIP i-S1 etholakala ohlangothini olungemuva lwe-thermostat uye endaweni ethi IVALIWE.
I-thermostat izobuyela kumodi yokusebenza evamile esimweni sokuVALIWE.
Okubalulekile: Izinguquko ezenziwe kumapharamitha ochwepheshe ngeke zisebenze inqobo nje uma inkinobho ye-DIP S1 isesimweni IVULIWE.
Amapharamitha:
I-P01 - Indawo yokusetha izinga lokushisa
- Hambisa inkinobho ye-DIP i-S1 etholakala ohlangothini lwe-thermostat uye endaweni ethi ON.
- I-“P01” kanye nephoyinti lokusetha izinga lokushisa kuzovela esibukweni.
- Sebenzisa izinkinobho ezithi [+] kanye nethi [-] ukuze ulungise indawo yokusetha izinga lokushisa.
Ibanga: 14…77°F / -10…+25°C, Okuzenzakalelayo: 37°F / 3°C
Inqobo nje uma izinga lokushisa le-ambient liphansi kunephoyinti lezinga lokushisa elingu-P01, i-PYROCON19-TRACE izovula.
I-P02 - Umkhawulo ophansi wokushisa wokushisa
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- I-“P02” kanye nezinga lokushisa eliphansi elilinganiselwe lizovela esibukweni.
- Uma izinga lokushisa kwinzwa yezinga lokushisa lehla ngaphansi komkhawulo wezinga lokushisa eliphansi, isistimu yokushisisa izoma.
- Sebenzisa izinkinobho ezithi [+] kanye nethi [-] ukuze ulungise indawo yokusetha izinga lokushisa.
- Ibanga: -40…+23°F / -40…-5°C Okuzenzakalelayo: -31°F / -35°C
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye futhi.
- Igama elithi “VULIWE” noma “VALIWE” lizovela esibukweni.
- Sebenzisa izinkinobho ezithi [+] kanye nethi [-] vula (VULIWE) noma vala (VALIWE) ipharamitha ye-P02.
Uma kukhutshaziwe, isistimu yokushisisa izosebenza ngaphandle kokulinganiselwa okuphansi kwezinga lokushisa.
I-P03 -Ukubambezeleka kwesikhathi ngaphambi kokumisa ama-heater
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- I-“P03”, “dL” kanye nokubambezeleka kwesikhathi ngaphambi kokumisa izifudumezi (Bambelela) kuzovela esibukweni.
- Sebenzisa izinkinobho ethi [+] kanye nethi [-] ukuze ulungise ukubambezeleka kwesikhathi - Amahora.
Ibanga: 0…amahora angu-9 Okuzenzakalelayo: ihora elingu-1 - Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye futhi.
- Sebenzisa izinkinobho ezithi [+] kanye nezithi [-] ukuze ulungise ukubambezeleka kwesikhathi – Amaminithi.
Ibanga: 0…59 amaminithi Okuzenzakalelayo: 30 imizuzu
Qaphela 1. Ukubala kokulibaziseka kwesikhathi kuzoqala lapho amazinga okushisa e-ambient enyuka ngaphezu kwezinga lokushisa lephoyinti elimisiwe.
Qaphela 2. I-stagukulandelana kwe-gering kuzoqhubeka phakathi nesikhathi sokulibaziseka.
I-P04 - Imodi yeManuwali NGESIKHATHI
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- Inkathi yesikhathi yemodi ethi “P04”, “Vuliwe” kanye nesikhathi semodi ethi “IVULIWE mathupha” sizovela esibonisini.
Uhlaka lwesikhathi lapho amahitha ahlala VULIWE ngemva kokuthola umyalo othi “VULIWE Ngemanuwali”. - Sebenzisa izinkinobho ezithi [+] kanye nethi [-] ukuze ulungise isikhathi “SOKUVULIWA Ngokuzenzela” (Amahora).
Ibanga: 1…48 amahora Okuzenzakalelayo: 4 amahora - Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye futhi.
- Sebenzisa izinkinobho ezithi [+] kanye nezithi [-] ukuze ulungise isikhathi “SOVULIWE Ngokuzenzela” (Amaminithi).
Ibanga: 0…59 amaminithi Okuzenzakalelayo: 30 imizuzu
I-P05 - Umjikelezo wama-heaters kanye nesikhathi sokuhlukanisa
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- “P05”, “SP” kanye nesikhathi sokuhlukanisa kuzovela esibukweni.
Amaminithi azocwayiza.
Umjikelezo wezifudumezi / ipharamitha yesikhathi sokuhlukanisa ichaza isikhathi sokusebenza sezifudumezi lapho zisebenza ngokulandelana.
ExampI-le: isikhathi sokuhlukanisa sisethelwe kumaminithi angu-10 futhi ama-heaters angu-4 asebenza ngokulandelana, i-heater ngayinye izoba IVULIWE imizuzu engu-2.5 (10/4=2.5). - Sebenzisa izinkinobho ezithi [+] kanye nethi [-] ukuze ulungise isikhathi sokuhlukanisa.
Ibanga: 1…600 amaminithi Okuzenzakalelayo: 120 imizuzu.
I-P07 - I-logic yokuphuma kwama-heaters (nge-TEMPERATURE SENSOR noma nge-AQUASTAT SENSOR)
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- “P07” kanye nezibalo “0”, “1”, “2” noma “3” zizovela esibukweni.
- Sebenzisa izinkinobho ezithi [+] kanye nethi [-] ukuze uchaze indlela yokuphuma 1-5 ngendlela elandelayo:
Qaphela: Uma inketho 2 ikhethiwe, isibonisi sezinga lokushisa sizohlala singenalutho.
I-P08 – Ikheli le-MAC le-BMS nele-Master-Slaves
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- “P08” kanye nekheli le-MAC lizovela esibukweni.
- Sebenzisa izinkinobho ethi [+] kanye nethi [-] ukuze usethe Ikheli le-MAC leyunithi.
Ukusetha ikheli le-MAC leyunithi kuzolenza litholakale ngesistimu ye-automation yasekhaya.- Okwesilawuli esisethwe yi-P11 njenge-Master -
Ibanga lamakheli le-BMS 1…63, okuzenzakalelayo 1 - Okwesilawuli esisethwe yi-P11 njengeSigqila -
Ibanga lamakheli 14…16, okuzenzakalelayo 14
- Okwesilawuli esisethwe yi-P11 njenge-Master -
I-P09 - Imodi yezimo zokuhlola / Imodi yokugunyazwa kukachwepheshe
VULA izimo zokuhlola ukuze uhlole ukusebenza kwesistimu ngokunganaki amapharamitha ezinzwa zokushisa (okungukuthi phakathi nehlobo).
Ezimweni zokuhlola, izinga lokushisa le-Ambient lihlala lingu-7°C/19°F.
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- "P09" izovela esibukweni.
- Sebenzisa inkinobho ethi [+] ukuze ufake imodi yokuhlola/yokuthuma – igama elithi “Test” lizovela esibukweni.
- Sebenzisa inkinobho ethi [-] ukuze uphume mathupha kumodi yokuhlola/yokuthuma – igama elithi “Hlola” lizonyamalala ekubonisweni.
Qaphela: Uma uchwepheshe engazange aphume mathupha kumodi yokuhlola/yokuthumela, iyunithi izobuyela ngokuzenzakalela kumodi evamile ngemva kwamahora angu-5.
P11 – Inkosi/Isigqila
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- "P11" izovela esibukweni.
Sebenzisa izinkinobho ezithi [+] kanye nethi [-] ukuze ukhethe phakathi:- “ΠA” – Master (Lapho usebenzisa i-PYROCON19-TRACE eyodwa noma ulawula amanye amadivaysi e-PYROCON19-TRACE axhunywe ku-A2,B2 njengezigqila) – okuzenzakalelayo
- “SL” – Isigqila (ilawulwa enye i-PYROCON19-TRACE exhunywe ku-A, B)
I-P15 - I-offset yokulinganisa inzwa yezinga lokushisa
- Cindezela inkinobho ethi [SELECT] kanye nethi [+] kanyekanye.
- "P10" izovela esibukweni.
- Sebenzisa inkinobho ethi [+] ukuze ulungise i-offset ukuze ulinganise izinga lokushisa elilinganisiwe.
Ibanga: -9…+9°F / -6…+6°C Okuzenzakalelayo: 0°F / 0°C
Qaphela: Uma uchwepheshe engazange aphume mathupha kumodi yokuhlola/yokuthumela, iyunithi izobuyela ngokuzenzakalela kumodi evamile ngemva kwamahora angu-5.
Londoloza izinguquko bese ubuyela kusibonisi esivamile
Ukuze ulondoloze izinguquko futhi ubuyele kusibonisi esivamile, hambisa i-DIP switch S1 uyibuyisele endaweni YOKUVALIWE.
Okubalulekile: Izinguquko ezenziwe kumapharamitha ochwepheshe ngeke zisebenze inqobo nje uma inkinobho ye-DIP S1 isesimweni IVULIWE.
Buyisela amanani azenzakalelayo
- Hambisa i-DIP shintsha i-S1 uye endaweni ethi ON.
- Cindezela bese ubamba inkinobho ethi [ON] imizuzwana engu-10. I-thermostat izokhala.
- Hambisa inkinobho ye-DIP i-S1 uyibuyisele endaweni YOKUVALIWE.
Izikhathi zokulinganisa ezimfushane (ukuhlola kuphela) – shintsha i-DIP S2
- Sebenzisa i-DIP switch S2 ukuze ufinyeze i-
- “VULIWE” - Izikhathi zokulinganisa ezimfushane - zokuhlola/zokuthuma kuphela (izikhathi zokulinganisa zizohlukaniswa ngama-60).
- "VALIWE" - Ukusebenza okuvamile.
Izikhathi zokulinganisa ezimfushane: Ihora elingu-1 langempela lizothatha iminithi elingu-1 kanti iminithi elingu-1 langempela lizothatha isekhondi elingu-1.
I-logic yokulandelanisa izifudumezi - i-DIP ishintsha i-S3 ne-S4
Sebenzisa amaswishi e-DIP i-S3 ne-S4 ukuze uchaze ukulandelana kokulandelana kwe-heater (amazoni) kanje:
Qaphela: uma okukhiphayo okungu-5 kusethwe ukuze kusebenze kanye nokuphumayo 1-4, (bona "I-Heater output no. 5 logic" kuzilungiselelo zikachwepheshe), izosebenza ngendlela efanayo nokuphumayo 4.
Nika amandla/Khubaza izindawo
Landela izinyathelo ezingezansi ukuze unike amandla noma ukhubaze indawo ngayinye kwezingu-5. Ngokuzenzakalelayo, wonke amazoni anikwe amandla.
- Vala i-thermostat.
- Cindezela bese ubamba kokubili izinkinobho ezithi [+] kanye nezithi [-] ngesikhathi esisodwa imizuzwana eyi-10.
- Khetha indawo edingekayo usebenzisa inkinobho ethi [Khetha]. Inombolo yendawo ekhethiwe izovela esibonisini futhi isithonjana se-heater sizokhanya.
- Sebenzisa inkinobho ethi [+] ukuze unike amandla indawo ekhethiwe (isithonjana seheater emnyama).
- Sebenzisa inkinobho ethi [-] ukuze ukhubaze indawo ekhethiwe (isithonjana seheater emhlophe).
- Phinda izinyathelo ezingaphezulu kwezi-3 ukuya kwezi-5 kunoma iyiphi indawo edingekayo.
- Cindezela bese ubamba kokubili izinkinobho ezithi [+] nezithi [-] kanyekanye futhi imizuzwana emi-5 ukuze ubuyele kusibonisi esivamile.
Khetha izindawo ezibucayi
Landela izinyathelo ezingezansi ukuze usethe indawo ngayinye esebenzayo njengendawo Ebucayi noma Engabalulekile. Ngokuzenzakalelayo, zonke izindawo zibalulekile.
- VULA i-thermostat.
- Cindezela bese ubamba kokubili izinkinobho ezithi [+] kanye nezithi [-] ngesikhathi esisodwa imizuzwana eyi-10.
- Khetha indawo edingekayo usebenzisa inkinobho ethi [Khetha]. Inombolo yendawo ekhethiwe izovela esibonisini futhi isithonjana se-heater sizokhanya.
- Sebenzisa inkinobho ethi [+] ukuze usethe indawo njenge-Critical zone ("IVULIWE" izovela ekubonisweni).
- Sebenzisa inkinobho ethi [-] ukuze usethe indawo njengendawo Engabalulekile (“VALIWE” izovela esibonisini).
- Phinda izinyathelo ezingaphezulu kwezi-3 ukuya kwezi-5 kunoma iyiphi indawo edingekayo.
- Cindezela bese ubamba kokubili izinkinobho ezithi [+] nezithi [-] kanyekanye futhi imizuzwana emi-5 ukuze ubuyele kusibonisi esivamile.
Qaphela: Inqobo nje uma izinga lokushisa le-ambient lingaphansi kwephoyinti elimisiwe, izindawo ezibucayi kuphela ezizobamba iqhaza ku-stagisimo esihle.
Uma indawo emisiwe isifinyelelwe, indawo esebenzayo izoqedela umjikelezo wayo olandelwa umjikelezo owodwa ogcwele wezoni ngayinye ebalulekile (okuhlanganisa omunye umjikelezo ogcwele wendawo esebenzayo).
Ngemuva kwalokho, futhi kuso sonke isikhathi "ukubambezeleka kwesikhathi ngaphambi kokumisa izifudumezi" ezisethwe yipharamitha P04, uhlelo luzoqala s.tagukuhlangana phakathi kwezindawo ezingabalulekile .
Example:
- Izindawo 1,2,3,4 zivuliwe
- Izindawo 1,2 Ezibucayi
- Izindawo 3,4 Ezingabalulekile
- Ilandelanisa i-logic 1+3 ndawonye, 2+4 ndawonye
- Ukubambezeleka kwesikhathi ngaphambi kokumisa izifudumezi: P04 = amahora angu-9.
I-BMS – BACnet/Modbus
Sebenzisa i-DIP switch S6 etholakala ohlangothini lwe-thermostat ukuze ukhethe iphrothokholi yenethiwekhi ye-BMS (A1,B1):
- I-S6 IVULIWE – BACnet
- I-S6 OFF – MODBUS
Ukufundwa kwezinga lokushisa kanye namaphutha okuxhumana
Ukufundwa kwenzwa yezinga lokushisa kungaphandle kwebanga lokulinganisa elithembekile
Ukufundwa kwezinga lokushisa eliphansi: Izinga lokushisa le-ambient < -9°F/-23°C
Ukufundwa kwezinga lokushisa eliphezulu: Izinga lokushisa le-ambient > 54°F/12°C
Isistimu izoqhubeka nokusebenza isebenzisa amanani achazwe ngaphambilini angashintshi.
Ngaphezu kwalokho, isibonisi sizoshintshana phakathi kuka-“LO” no--11°F/-24°C ukuze kufundwe izinga lokushisa eliphansi, naphakathi kuka-“HI” no-55°F/13°C ukuze kufundwe izinga lokushisa eliphezulu.
Inzwa yezinga lokushisa ayixhunyiwe noma isekethe emfushane
“SensErr 2” Izovela esibukweni.
Izigqila - Iphutha lokuxhumana
Aux1 - Iphutha lokuxhumana kwezigqila
“Aux1” kanye “00” Azovela esibukweni.
Uhlu lwezinto - Modbus
Sebenzisa i-DIP switch S6 etholakala ohlangothini lwe-thermostat ukuze ukhethe iphrothokholi yenethiwekhi ye-BMS (A1,B1) - S6 OFF - Modbus
Imodi ye-MODBUS RTU, Ikheli Lenceku 1-127,
Izinga le-Baud: 9600, n, 8, 1
Imiyalo esekelwayo:
0x03 = Funda Amarejista Ukubamba (bonke).
0x06 = Hlela Irejista Eyodwa Ngaphambili (Okwamarejista e-R/W kuphela),
Umyalo 0x2B usetshenziselwa ukukhomba isilawuli
Umthengisi Url = "meitavtec.com"
VendorName = “Meitav-Tec”.
Ikhodi Yomkhiqizo = “20420801”
I-MajorMinorRevision = “V 20420801.3119”
| N° | Ikheli | Inani | Igama Lento | Okuzenzakalelayo | Ukufinyelela |
| 1 | 0 [0x00] | -40… 35 ° C (-40… 95 ° F) | Izinga lokushisaNgaphandle | – | R |
| 2 | 1 [0x01] | -10…25°C (14…77°F) | I-SetPoint | 3°C (37°F) | R/W |
| 3 | 2 [0x02] | -40… 0 ° C (-40… 32 ° F) | I-LowLimitHeat | -35°C (-31°F) | R/W |
| 4 | 3 [0x03] | 1…540 imiz | Ama-heatersOffDelay | 30 imiz | R/W |
| 5 | 4 [0x04] | 10…2880 imiz | I-ManualPeriodTime | 40 imiz | R/W |
| 6 | 5 [0x05] | 4…600 imiz | StaggeringTime | 20 imiz | R/W |
| 7 | 6 [0x06] | 0…2 | TemperatureAquastatLogic | 0 | R/W |
| 8 | 7 [0x07] | 0…4 | I-HeaterMode | 0 | R/W |
| 9 | 8 [0x08] | 1-Vula,0-Ivaliwe | Imodi Yokuthuma | 0-Ivaliwe | R/W |
| 10 | 9 [0x09] | 1-Vula,0-Ivaliwe | I-heater 1 | – | R |
| 11 | 10 [0x0A] | 1-Vula,0-Ivaliwe | I-heater 2 | – | R |
| 12 | 11 [0x0B] | 1-Vula,0-Ivaliwe | I-heater 3 | – | R |
| 13 | 12 [0x0C] | 1-Vula,0-Ivaliwe | I-heater 4 | – | R |
| 14 | 13 [0x0D] | 1-Vula,0-Ivaliwe | I-heater 5 | – | R |
| 15 | 14 [0x0E] | 1-Vula,0-Ivaliwe | I-Aquastat_Signal | – | R |
| 16 | 15 [0x0F] | 1-Vula,0-Ivaliwe | I-SettingMode | – | R |
| 17 | 16 [0x10] | 1-Vula,0-Ivaliwe | Imodi Yesikhathi Esifushane | – | R |
| 18 | 17 [0x11] | 1-Vula,0-Ivaliwe | StageringMode | – | R |
| 19 | 18 [0x12] | 1-Vula,0-Ivaliwe | StageringMode | – | R |
| 20 | 19 [0x13] | 1-Vula,0-Ivaliwe | Khanyisa cisha | 0-Ivaliwe | R/W |
| 21 | 20 [0x14] | 1-Vula,0-Ivaliwe | C_F_Isikali | 0-Ivaliwe | R/W |
| 22 | 21 [0x15] | 1-Vula,0-Ivaliwe | BuyiselaOkuzenzakalelayo | 0-Ivaliwe | R/W |
| 23 | 22 [0x16] | 1-Vula,0-Ivaliwe | I-GroundFault | 0-Ivaliwe | R |
| 24 | 23 [0x17] | -40… 35 ° C (-40… 95 ° F) | I-InternalTemperature(T3) | – | R |
| 25 | 24 [0x18] | 1-Vula,0-Ivaliwe | I-InternalHeater | – | R |
Uhlu lwezinto - BACnet
Sebenzisa i-DIP switch S6 etholakala ohlangothini lwe-thermostat ukuze ukhethe iphrothokholi yenethiwekhi ye-BMS (A1,B1) - S6 ON - BACnet
I-BACnet MSTS Izinga le-Baud: 9600, 19200, 38400, 76800 akukho ukulinganiswa, amabhithi edatha ayi-8, ibhithi eyodwa yokumisa
| N° | Into | Inani | Igama Lento | Okuzenzakalelayo | Ukufinyelela |
| 1 | I-AnalogValue_#0 | -10…25°C (14…77°F) | I-SetPoint | 3°C (37°F) | R/W |
| 2 | I-AnalogValue_#1 | -40… 0 ° C (-40… 32 ° F) | I-LowLimitHeat | -35°C (-31°F) | R/W |
| 3 | I-AnalogValue_#2 | 1…540 imiz | Ama-heatersOffDelay | 30 imiz | R/W |
| 4 | I-AnalogValue_#3 | 10…2880 imiz | I-ManualPeriodTime | 40 imiz | R/W |
| 5 | I-AnalogValue_#6 | 4…600 imiz | StaggeringTime | 20 imiz | R/W |
| 6 | I-AnalogValue_#7 | -40… 35 ° C (-40… 95 ° F) | Izinga lokushisaNgaphandle | – | R |
| 7 | I-AnalogValue_#8 | 0…2880 imiz | I-HeatersOffTimeDelay | – | R |
| 8 | I-AnalogValue_#9 | 0…4 | I-HeaterMode | 0 | R/W |
| 9 | I-AnalogValue_#29 | 0…2 | TemperatureAquastatLogic | 0 | R/W |
| 10 | I-AnalogValue_#20 | -40… 35 ° C (-40… 95 ° F) | I-InternalTemperature(T3) | – | R |
| 11 AnalogValue_#24 1… 4194303 BacnetDeviceInstanceNumber 315000+MAC R/W | |||||
| 12 Okokufaka kanambambili_#2 | 1-Vula,0-Ivaliwe | I-SettingMode | – | R | |
| 13 Okokufaka kanambambili_#3 | 1-Vula,0-Ivaliwe | Imodi Yesikhathi Esifushane | – | R | |
| 14 Okokufaka kanambambili_#4 | 1-Vula,0-Ivaliwe | StageringMode | – | R | |
| 15 Okokufaka kanambambili_#5 | 1-Vula,0-Ivaliwe | StageringMode | – | R | |
| 16 Okokufaka kanambambili_#8 | 1-Vula,0-Ivaliwe | I-Aquastat_Signal | – | R | |
| 17 I-BinaryOutput_#0 | 1-Vula,0-Ivaliwe | I-heater 1 | – | R | |
| 18 I-BinaryOutput_#1 | 1-Vula,0-Ivaliwe | I-heater 2 | – | R | |
| 19 I-BinaryOutput_#2 | 1-Vula,0-Ivaliwe | I-heater 3 | – | R | |
| 20 I-BinaryOutput_#3 | 1-Vula,0-Ivaliwe | I-heater 4 | – | R | |
| 21 I-BinaryOutput_#4 | 1-Vula,0-Ivaliwe | I-heater 5 | – | R | |
| 22 I-BinaryOutput_#5 | 1-Vula,0-Ivaliwe | I-InternalHeater | – | R | |
| 23 I-BinaryValue_#0 | 1-Vula,0-Ivaliwe | Khanyisa cisha | 0-Ivaliwe | R/W | |
| 24 I-BinaryValue_#2 | 1-Vula,0-Ivaliwe | C_F_Isikali | 0-Ivaliwe | R/W | |
| 25 I-BinaryValue_#4 | 1-Vula,0-Ivaliwe | Imodi Yokuthuma | 0-Ivaliwe | R/W | |
| 26 I-BinaryValue_#5 | 1-Vula,0-Ivaliwe | BuyiselaOkuzenzakalelayo | 0-Ivaliwe | R/W | |
| 27 I-BinaryValue_#14 | 1-Vula,0-Ivaliwe | I-GroundFault | 0-Ivaliwe | R | |
Ucingo: (856) 2882882
Ucingo: +972-3-9626462
Ifeksi: +972-3-9626620
support@meitavtec.com
www.meitavtec.com
Amadokhumenti / Izinsiza
 |
I-meitav-tec PYROCON19 Isilawuli kanye Nephaneli Yesixhumi Esibonakalayo Somsebenzisi [pdf] Incwadi Yomnikazi PYROBOX3, PYROBOX5, PYROCON19 Controller and User Interface Panel, PYROCON19, Controller and User Interface Panel, User Interface Panel, Interface Panel |