Okuqukethwe
fihla
I-Masibus MAS-DI-16-D 16 Channel Digital Input Module
Imininingwane Yomkhiqizo
| Ipharamitha | Imininingwane |
|---|---|
| Inombolo yokufaka yeziteshi nohlobo | 16 Channel Digital Input (AC/DC) |
| Ibanga Lokufaka | Bheka kuThebula 1 |
| On State Voltage (Von) | Bheka kuThebula 1 |
| I-Off State Voltage (Voff) | Bheka kuThebula 1 |
Imiyalo yokusetshenziswa komkhiqizo
Ukuphepha Nesexwayiso
- Gwema ukushaqeka okukhulu noma ukudlidliza ukuze uvimbele izinkinga zokulinganisa.
- Zithobe ngaphambi kokuphatha umkhiqizo ukuze uvimbele i-Electrostatic Discharge (ESD).
- Vala amandla njalo ngaphambi kokufaka noma ukuxazulula inkinga.
- Ukushintshwa nokulungiswa kwengxenye kufanele kwenziwe ngabasebenzi abagunyaziwe.
- Izintambo kufanele zihambisane nezindinganiso nemithetho kagesi.
Ukuxhumana
- Xhuma amandla alinganiselwe kumatheminali amakwe 24VDC+ & 24VDC- ngokomdwebo wezintambo.
- Kumatheminali Okufakwayo Kwenkundla/Okukhiphayo: Xhuma okokufaka phakathi Kokokufaka+ nokokufaka- esiteshini ngasinye futhi uthathe okukhiphayo kuzixhumi ezikhethiwe.
I-Mas ibus Digital Input Field Interface Board ineziteshi ezingu-16 ezamukela izinhlobo ezahlukene ze-AC/DC Wet voltages kanye noxhumana nabo bamahhala abangaba khona ngokuphakelwa okuvamile Kwenkambu Yangaphandle Ye-Excitation futhi ibaguqulele ekukhipheni okukodwa kwe-Open Collector/24V Digital enomthombo wangaphandle weSistimu Yokuvusa amadlingozi.
ISICELO
- Humusha futhi uhlukanise i-AC/DC Field voltages kuya kumasignali angu-24V
- Vikela izinhlelo zokulawula ezibizayo kumaphutha enkundla
- Isixhumi esibonakalayo senkambu yedijithali yezinhlelo ze-PLC/DCS/SCADA
- Okukhiphayo kuhambisana namamojula aseceleni omthombo/Sinki
INKCAZO
- Okokufaka
- Inombolo Yeziteshi Nohlobo 16 Channel Digital Input (AC/DC) (Isethi yasefekthri)
- Ibanga Lokufaka Bheka kuThebula 1
- On State Voltage (Von) Bheka kuThebula 1
- I-Off State Voltage (Voff) Bheka kuThebula 1
- I/P uxhumano Isixhumi se-MKDS
- Okukhiphayo
- Uhlobo Lokukhiphayo: Vula isiqoqi, umthombo, noma usinki
- Igama/Ubukhulu. Voltage 24V / 28V DC
- Igama/Ubukhulu. Okwamanje 5mA/50mA
- Okukhiphayo KU-LED yesimo Okuhlaza
- O/P uxhumano I-25-pin D-sub male connector/20-pin FRC isixhumi
- Ukunikezela 24VDC
- Ukunikezwa kwamandla kagesi
- Ukuhlukaniswa 1.5 kV I-AC phakathi kwenkambu nohlangothi lwesistimu
- Ezemvelo
- Izinga lokushisa lokusebenza: Isebenza ku-0 kuye ku-50°C
- Umswakama ohlobene 30 kuya ku-95% i-RH engafinyeleli
- Ukuvikelwa Kwemvelo I-Conformal Coating ku-PCB
- Okomzimba
- Uhlobo Lokukhweza I-DIN Rail (35 mm ububanzi)
- UProfile Okubalulekile I-PVC
- Ubukhulu 200mm(L) x 90mm(W) x 60mm(D)
- Isisindo Cishe 250 gm
- Imininingwane yesikhumulo
- Isikhungo Sokugcina I-UL, i-CSA ejwayelekile
- Usayizi Wekhebula Letheminali Kufika ku-conductor ongu-2.5mm²
Ubukhulu
225 (L) x 90 (W) x 90 (D)
Idatha Yezobuchwepheshe
| Voltage Isigaba |
I-vol esebenzayotage |
Inombolo yokokufaka | On state voltage (Von) | Okokufaka Okuncane Kwamanje | I-Off-state voltage (Voff) | Isikhathi sokuphendula |
| 12V(DC) | 7-15V(DC) | 16 | ≥ 7V(DC) | I-3mA ku-12 VDC | ≤ 4V(DC) | ≤2mSec |
| 24V(DC) | 15-30V(DC) | 16 | ≥ 15V(DC) | I-3mA ku-24 VDC | ≤ 5V(DC) | ≤ 2mSec |
| 48V(DC) | 30-55V(DC) | 16 | ≥ 30V(DC) | I-3.2mA ku-48 VDC | ≤ 9V(DC) | ≤ 2mSec |
| 110V(DC) | 70-132V(DC) | 16 | ≥ 75V(DC) | I-2mA ku-110VDC | ≤ 30V(DC) | ≤ 15mSec |
| 220V(DC) | 110-250V(DC) | 16 | ≥ 110V(DC) | I-2mA ku-220VDC | ≤ 50V(DC) | ≤ 20mSec |
| 110V(AC) | 70-132V(AC) | 16 | ≥ 70V(AC) | 12 mA ku-120VAC | ≤ 30V(AC) | ≤ 100mSec |
| 230V(AC) | 110-265V(AC) | 16 | ≥ 110V(AC) | 12 mA ku-230VAC | ≤ 50V(AC) | ≤ 100mSec |
UKUPHEPHA NESEXWAYISO
- Njenge-MAS-DI-16-D enokulinganisa kwephaneli ye-potentiometer yangaphambili, akumele kuvezwe ukushaqeka okukhulu noma ukudlidliza okungabangela i-SCM ukuthi iphume ekulinganiseni.
- Ukuze ugweme i-Electrostatic Discharge (ESD) ku-SCM, engase ibangele umonakalo unomphela, hlala uzinzile ngokuthinta imishini ethile ephansi.
- Ngaphambi kokufaka noma ukuqala kwanoma yiziphi izinqubo zokuxazulula izinkinga amandla azo zonke izisetshenziswa kufanele acishwe futhi abekwe wodwa. Amayunithi okusolakala ukuthi anephutha kufanele anqanyulwe futhi asuswe kuqala futhi alethwe endaweni yokusebenzela efakwe kahle ukuze ahlolwe futhi alungiswe.
- Ukushintshwa kwengxenye kanye nokulungiswa kwangaphakathi kufanele kwenziwe ngumuntu wenkampani kuphela. Izintambo kufanele zenziwe ngabasebenzi, abanolwazi oluyisisekelo lukagesi nolwazi olusebenzayo.
- Zonke izintambo kufanele zihambisane nezindinganiso ezifanele zokusebenza kahle kanye namakhodi nemithetho yendawo. Izintambo kufanele zifanele ivolumutage, isilinganiso samanje, nezinga lokushisa lesistimu. Qaphela ukuthi ungaziqinisi kakhulu izikulufi zetheminali.
UKUXHUMANA
- Xhuma amandla alinganiselwe kutheminali lapho i-24VDC+ & 24VDC- ichazwa kumdwebo wezintambo.
- Amatheminali Wokufaka/Okukhiphayo:
Xhuma okokufaka phakathi kwetheminali lapho Okokufaka+ Nokufakwayo- kwesiteshi esithile Sokokufaka bese uthatha okukhiphayo kusixhumi sowesilisa esifakwe ku-PCB sohlobo lwe-25-pin D noma kutheminali lapho Okuphumayo+ Nokukhipha- kuchazwe Emininingwaneni Yokuxhumana.
Imininingwane Yokuxhuma Okukhiphayo yohlobo lwe-Pin D engu-25
| Amatheminali | 25 pin D-Type Isixhumi | 20 pin FRC Isixhumi |
| 1 | ID 16 | ID 16 |
| 2 | ID 15 | ID 15 |
| 3 | ID 14 | ID 14 |
| 4 | ID 13 | ID 13 |
| 5 | ID 12 | ID 12 |
| 6 | ID 11 | ID 11 |
| 7 | ID 10 | ID 10 |
| 8 | ID 9 | ID 9 |
| 9 | ID 8 | ID 8 |
| 10 | ID 7 | ID 7 |
| 11 | ID 6 | ID 6 |
| 12 | ID 5 | ID 5 |
| 13 | ID 4 | ID 4 |
| 14 | ID 3 | ID 3 |
| 15 | ID 2 | ID 2 |
| 16 | ID 1 | ID 1 |
| 17 | NC | NC |
| 18 | NC | NC |
| 19 | NC | +24V |
| 20 | NC | GND |
| 21 | NC | |
| 22 | NC | |
| 23 | NC | |
| 24 | +24V | |
| 25 | GND |
VIMBELA ISI-DIAGRAM
UKUFAKA
Ukukhweza:
- Beka imojula ngendlela yomhlahlandlela wesitimela we-DIN emaphethelweni angaphansi kukaloliwe we-DIN bese uyihlwitha iye phansi.
- Izindlu zigxunyekwe kumzila wesitimela we-DIN ngokushwibeka endaweni yawo.
- Ukuhlelwa kokukhweza Okuvundlile Okuboniswe lapha, kuvumela ukuzungeza komoya okume mpo okuhle. Kuyanconywa futhi ukuthi kugcinwe igebe elanele phakathi kwama-SCM amabili.
Ukususwa:
Khipha ukubamba okubambekayo usebenzisa isikrudrayiva bese ukhipha imojuli emaphethelweni aphansi e-DIN Rail.
IKHODI YOKU-ODA
| Imodeli No | UHLOBO LOKUFAKA | Okokufaka Voltage | Uhlobo Lokukhiphayo | Ukuvikelwa Kokukhipha | Lokukhipha Connection | ||||
|
MAS- DI-16- D- XXXXX |
X | X | X | X | X | ||||
|
AC |
1 | 230VAC | 0 | UMTHOMBO | 0 | AKUKHO
I-FUSE |
0 | D-
UHLOBO |
|
| 2 | 110VAC | 1 | ZINKA | 1 | NGE
I-FUSE |
1 | I-FRC | ||
|
DC |
1 | 220VDC | |||||||
| 2 | 110VDC | ||||||||
| 3 | 48VDC | ||||||||
| 4 | 24VDC | ||||||||
| 5 | 12VDC | ||||||||
IKHODI YOKU-ODA YEKHABULA
| Imodeli | Uhlobo Lokufaka & Ububanzi | |
| m-PC-D25F-LG | XX | |
| C | 2.5 amamitha | |
| D | 3.0 amamitha | |
| E | 3.5 amamitha | |
| F | 5.0 amamitha | |
| G | 7.0 amamitha | |
| S | Okukhethekile | |
UKUDUBULA INKINGA
- Iyunithi AYIVULI?
Hlola ukuxhumeka nokunikezwayo okusetshenzisiwe. - Ayitholi okukhiphayo okufanele.
Hlola ukuxhumeka nokuhlinzeka, okusetshenzisiwe noma yikuphi ukuxhumana okuxekethile
MAYELANA NENKAMPANI
- i-masibus Automation & Instrumentation Pvt. Ltd. B/30, GIDC Electronics Estate, Sector-25, Gandhinagar-382044, Gujarat, India
- Ph: +91 79 23287275-77
- I-imeyili: support@masibus.com
- Web: www.masibus.com
Imibuzo Evame Ukubuzwa
- Yini okufanele ngiyenze uma umkhiqizo ubhekene nokushaqeka okunzima?
Ukushaqeka okukhulu kungase kubangele izinkinga zokulinganisa, ngakho gwema ukubeka umkhiqizo esimweni esinjalo. - Ngingakwazi ukuphatha umkhiqizo ngaphandle kokuzibekela phansi?
Kunconywa ukuthi uzihlinze ngaphambi kokuphatha umkhiqizo ukuze uvimbele ukulimala kwe-Electrostatic Discharge (ESD).
Amadokhumenti / Izinsiza
 |
I-Masibus MAS-DI-16-D 16 Channel Digital Input Module [pdf] Umhlahlandlela wokufaka I-MAS-DI-16-D, MAS-DI-16-D 16 Channel Digital Input Module, MAS-DI-16-D, 16 Channel Digital Input Module, Digital Input Module, Input Module, Module |
