LUMBERJACK Tools CSK4000 Countersink Bit Set

MAYELANA NOMKHIQIZO WAKHO

Siyabonga ngokuthenga i-Countersink Bit Set yethu! I-Countersink Bit yakhelwe ukucisha izimbobo ezimboza u-60 o ukuze zihambisane nochwepheshe behlombefile usikwe yi-Commerce and Industrial Series Tenon Cutters. Lokhu kubangela ukuhlangana okuqinile nokubukeka okuqedwe kakhudlwana nobungcweti. Umzimba wamathuluzi wenziwa ngomshini kusuka ku-billet ye-aluminium eqinile. I-blade inqunywe nge-laser, iphathwe ngokushisa, kanye nomhlabathi onembile ukuze unikeze iminyaka yesevisi. I-shank yenziwe ngomshini ngensimbi ye-alloy ukuze imelane nezingcindezi zokusika.

Isiqinisekiso sokuphila kwethu sihlanganisa umzimba wethuluzi kanye ne-shank. I-blade imbozwe ukuphuka izinsuku ezingu-90 kusukela ngosuku lokuthenga ngaphansi kwezimo ezijwayelekile zokusebenza. Ama-blades azofiphaza ngokushesha lapho esika izinkuni eziqinile ngokumelene ne-softwoods (ehlutshiwe noma engahlutshiwe). Umhlabathi nezinye izinto eziqhumayo zizonciphisa impilo ye-blade futhi azimbozwa ngaphansi kwalesi siqinisekiso. Lapho wenza isimangalo, kufanele ubonise ubufakazi bokuthenga kumsabalalisi ogunyaziwe. Lesi siqinisekiso sisebenza kuphela kumthengi wangempela, hhayi kumathuluzi athengiswe amasekeni, asetshenzisiwe, noma athengiswe “njengoba kunjalo” enkampanini yesibili.

YINI VOIDS IWARANTI
Ukugcina impilo yethu yonke kanye newaranti yezinsuku ezingama-90 kufanele UGWEME lezi zenzo ezilandelayo:

• Ukusebenzisa ithuluzi ku-lathe
• Isebenzisa ithuluzi ngaphezu kuka-600 RPM
• Ukusebenzisa ithuluzi kusipikili noma entweni yangaphandle
• Ukushintsha noma ukusebenzisa kabi ithuluzi

UKUPHEPHA
Ngaphambi kokuqala noma iyiphi iphrojekthi, funda ngokucophelela futhi ulandele YONKE imiyalelo yokuphepha nokusebenza yanoma imaphi amathuluzi noma izisetshenziswa ozisebenzisayo. Ukwehluleka ukwenza kanjalo kungase kubangele ukulimala ngokomzimba kuwe noma kulabo abaseduze nawe. Uma uzizwa ungakhululekile ukusebenzisa i-Countersink Bit yethu nanoma yiliphi elinye ithuluzi, YEKA ngokushesha. Amathuluzi we-Lumberjack awathwesi icala ngokulimala okudalwe ku-opharetha, isibukeli, noma amathuluzi asetshenziswe ngokuhambisana nokusebenzisa noma ukusebenzisa kabi i-Countersink Bit yethu.

• UNGALOKOTHI USEBENZISE AMATHULUSI AMANDLA NGAPHANSI KWETHONYWA YEZIDAKAMIZWA, UTSHWALA, NOMA YIYIPHI IMITHI.
• NJALO NXIBA IZIBALASI ZOKUPHEPHA, UMASK OTHULI, KANYE NEZINYE IZINTO ZOVIKELA MUNTU NJENGOBA KUDINGEKA.
• UNGALINGE UGQOKA IZINTO EZIZIXHALAZAYO EZINGABANJWA ZIHAMBA
• IZIQEPHU. VIKELA IZINWELE EZINGAGUQUKA NOMA EZINDLE KUDE NENDAWO.
• SINCOMA KAKHULU UKUSHAYELA NGESIVIVINYO ESILODWA, OKUSHAYWA NGEGIYELA OKUNE-RPMS KA-500 NOMA NGAPHANSI.
• UKWEDLULA LA MA-RPMS KUNGEKUBELE EKONAMENI ITHULUSI.
• NJALO NQUKA AMANDLA UVUMELE I-DRILL UKUZE KUFIKE KU-A
• QEDELA UKUMISA NGAPHAMBI KOKUFAKA, UKUSUSA, NOMA UKULUNGISELELA ITHULUSI.
• UNGALOKOTHI USEBENZISE AMA-ENDING FORCE (UKUlayishwa ESEceleni) ETHULULWENI. USIDE
• UKUlayishwa KUNGENZA I-SHANK UKWEHLULEKA NOMA KUNGEKUDLA EKONAKENI YEBHADE.
• NJALO UVIKELA Ilogo KU-VISE NOMA I-CLAMP NGAPHAMBI KOKUQALA I-DRILL YAKHO.
• UKWEHLULEKA UKWENZA KHONA KUNGENZEKA ELIMENI. HLALE UPHATHA I-BLADE NGOKUNAKEKELA OKUPHEZULU! UKWEHLULEKA UKWENZA LOKHO KUNGENZEKA EKULIMENI OKUBI.
• LAPHO KUDINGEKA AMANDLA ABANGAPHEZULU UKUSIKA, UKUSHIYA KABUSHA, NOMA OKUSEKILE AMA-LADE. ITHULUSI ELIbukhali LIYITHULUSI ELIPHEPHILE!

OKUHLANGANISIWE

Qaphela: Izithombe akufanele zikalwe.

ISETHA

Faka i-Blade

• a. Faka i-TB3125 Blade ephaketheni bese uyinamathisela ngokukhululekile ngezikulufu.
• b. Sebenzisa ushimu owodwa ukubeka i-blade ngokumelene nosinki wokubala.
• c. Bamba i-blade endaweni ngocezu lokhuni ngenkathi uvikela izikulufu.
• d. Susa i-shim.

ISEXWAYISO! I-LADE IQINISE KAKHULU!

Lungisa i-Blade

Umfanekiso ongakwesokudla ubonisa ukuthi kwenzekani ekusebenzeni ngokusika ngokulungisa i-blade.

KUBALULEKILE
I-blade offset efanele ibalulekile ekusikeni okubushelelezi.

• Uma ukusika kunolaka kakhulu (ukuluma kakhulu), sebenzisa ukuthanda ukuphila.
• Uma ukusika kungashoni kakhulu (akukuluma ngokwanele), engeza amashimu amaningi.
• Iphepha eligoqiwe lisebenza kahle njengeshim yokulungisa kahle

Faka i-Bushing

• Faka i-bushing phansi kwe-Countersink usebenzisa isikulufu sehlombe.

Ithiphu
Sincoma i-RPM ephansi, isivinini esisodwa, i-drill enezintambo. Faka isihlahla esilungile sembobo yokufa (ikhasi 5) bese unamathisela i-drill ku-shank.

Ithiphu
Sebenzisa i-drill press noma i-Drill Sergeant ukuze ubhoboze izimbobo eziqondile.

KUBALULEKILE!
Imbobo yeMortise kumele iqonde ngaphambi kokusebenzisa usinki wokubala. Izimbobo ezingavamile zizobangela ukuthi i-countersink bushing ibophe futhi izovimbela usinki ukuba usike kahle.

AMANDENI

Umzimba
Ukuhlanza

• Gcina umzimba we-Countersink ungenawo uketshezi nokunye ukwakheka.
• Njalo susa i-blade ngaphambi kokuhlanza.
• Hlanza ithuluzi nge-solvent (njenge-mineral spirits).

ISEXWAYISO: HLALE UPHATHA I-BLADE NGOKUNAKEKELA OKUPHEZULU!
UKWEHLULEKA UKWENZA LOKHO KUNGENZEKA EKULIMENI OKUBI.

Blade

• Ukunakekela
  • Njalo sula i-blade ngefilimu encane yamafutha ekupheleni kosuku
    ukusiza ukuvimbela i-oxidation.
• Ukuhlanza
  • Hlanza i-blade nge-solvent (njenge-mineral spirits) futhi ngokushesha usebenzise ifilimu encane yamafutha ukuvimbela i-oxidation.
  • Ukulola
  • Sebenzisa itshe lokulola noma file ukuze uphinde ulole i-blade, bese uhlanza i-blade futhi usebenzise ifilimu encane yamafutha.
• Shank
  • Ukushintshwa
  • Uma i-shank yakho iphuka, sinikeza ama-shank esikhundleni (bona ikhasi lokuqala ukuze uthole imininingwane yokuxhumana).
  • Vula i-shank ngokuphambene newashi ukuze uyisuse.
  • Vula i-shank ngokwewashi ukuze ufake.

SEBENZA UKUSEBENZISA NGASINYE

• Hlanza iphakethe le-blade X
• Umzimba ohlanzekile X
• Hlanza i-blade X
• Hlola i-blade X
• I-Oil blade X

UKUXOXA IZINKINGA

INKINGA	IMBANGELA	ISIXAZULULO
• Cha countersinking mortise imbobo.	• I-Blade ayisuki ngokwanele kusuka emzimbeni wamathuluzi.	• Sebenzisa i-Blade Shim ukuze unciphise i-blade evela ethuluzini (Ikhasi 5).
	• Ukuzama ukuzika imbobo yesidumbu esigwegwile.	• Usinki wekhawunta usebenza kuphela emigodini eqondile.
	• Ukusebenzisa isihlahla esingalungile sosayizi.	• Kala imbobo yesidumbu futhi qondanise nesihlahla esifanele.
• Ukuluma kakhulu.	• Ukusika okunolaka kusuka i-blade offset.	• Lungisa i-blade usebenzisa eyodwa noma akukho Blade Shims (Ikhasi 5).
• I-Shoulder Screw kunzima ukuyisusa.	• Kufakwe ngaphandle kokusebenzisa i-anti-seace emiculweni.	• Gcoba ukuvimbela ukubanjwa ukuze usikulufi imicu ngaphambi kokufaka.
• Ukubhoboza kuyama ngenkathi uvala imbobo yomgodi.	• Ukusebenzisa isivinini esishintshashintshayo sokuprakthiza.	• Qiniseka ukuthi usebenzisa i-drill enesivinini esisodwa esinama-RPM aphansi.
	• I-blade bite inolaka kakhulu.	• Yibuyisele emuva i-blade ephaketheni leblade (Ikhasi 5).
• I-drill spins, kodwa usinki uyeka ukujula.	• Iphakethe le-countersink ligcwele ama-chips.	• Khipha ngokucophelela ama-chips kusinki nge-screwdriver.

IZENZAKALO EZINGALINDELEKILE

Onjiniyela nabasebenzi Bokulawula Ikhwalithi e-Lumberjack Tools bakunikeze elinye lamathuluzi wokubala asebenziseka kalula futhi aphephe kakhulu emakethe. Nokho, kuhlale kunethuba elingalindelekile lokuhluleka. Sicela uxhumane nokwesekwa kwamakhasimende ethu ukuze uthole okunye esikhundleni uma kwenzeka ukwehluleka kumzimba wamathuluzi, i-shank, noma i-blade.

Siyabonga futhi ngokuthenga amathuluzi ethu!
3210 Hogarth St., Eau Claire, WI, 54739 715.514-0319 www.lumberjacktools.com

Amadokhumenti / Izinsiza

LUMBERJACK Tools CSK4000 Countersink Bit Set [pdf] Incwadi Yeziqondiso CSK4000, CSK4000 Countersink Bit Set, Counterssink Bit Set, Bit Set, Setha

Izithenjwa

• Imaniwali yosebenzisayo