LTECH M9 LED Controller

The MINI Series LED Remote Controller adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (when unobstructed). When used with the P Series Controllers (P1/P2/P3/P4/P5), one controller supports 5-channel output and is compatible with five types of lamps: DIM (dimming), CT (color temperature), RGB (three-primary color), RGBW (RGB + white), and RGBCW (RGB + cool white + warm white). Within the effective control range, one remote controller can control an unlimited number of controllers, enabling functions such as light on/off, brightness adjustment, color temperature adjustment, RGB static color adjustment, and dynamic mode effects.

It has 9 built-in dynamic modes that can be programmed and modified via the remote controller, meeting users’ needs for different lighting applications. Additionally, it supports enabling/disabling the power-off memory mode and allows setting a 1-9 second fade-in/fade-out time for the controller’s on/off operation.

Imingcele Yezobuchwepheshe

Imodeli	M9
Umbala	Emhlophe
Uhlobo olungenantambo	I-RF 2.4GHz
Izilawuli Ezivumelanayo	P1、P2、P3、P4、P5 (When programming with this remote controller, first pair any remote controller (such as M1A/M1B/ M1C/M1D/M2A…) with the controller (P1/P2/P3/P4/P5).)
Ukusebenza voltage	3Vdc (Button battery CR2032×1)
Okulindile okwamanje	＜ 1uA
Ibanga lesilawuli kude	30M (Ngaphansi kokuphazanyiswa)
Izinga lokushisa lokusebenza.	-25℃~50℃
Isisindo	40g±10g
Ubukhulu	104×58×9mm (remote)，108×63×14mm (remote + hold)

Ubukhulu

Ukufakwa Komkhiqizo

Izindlela ezimbili zokulungisa isibambi esikude:

1. Lungisa isibambi esikude odongeni ngezikulufu ezimbili.
2. Lungisa isibambi esikude odongeni nge-adhesive engu-3M.

Qaphela: Sicela ukhiphe ithebhu yebhethri ngaphambi kokuyisebenzisa okokuqala

Inkinobho Imisebenzi

• Khanyisa cisha: Press briefly to turn the light on or off.
• Okubomvu/Okuluhlaza/Okuluhlaza okwesibhakabhaka: Press briefly to turn the static red/green/blue channel on or off; Press and hold to adjust the brightness of the current channel.
• W/CCT: Press briefly to turn the W/CCT channel on or off; Press and hold to adjust the brightness of the W channel or the color temperature of the CCT channel.
• CCT Brightness: Press and hold to adjust the brightness of the CCT channel.
• Color Save Button: Press briefly to recall the saved static color;  Press and hold to save the current static color.
• Program Play Button: Press briefly to switch between 3 dynamic effects (jump, fade, stroboscope) (applied to transitions between saved static colors); Press and hold to play 9 dynamic modes in a loop.
• Mode Save Button: Press briefly to recall the dynamic mode; Press and hold to save the current dynamic effect as a dynamic mode.
• Isivinini/Ukukhanya +/-: Press briefly to adjust the speed of the dynamic mode; Press and hold to adjust the brightness of the dynamic mode.
• Power-Off Memory Mode Switch: Press briefly to enable/disable the memory mode of the current controller.
• On/Off Fade Time: Press and hold the “FADE TIME” button and the Mode Save Button (while pressing the number keys 1-9) to set the on/off fade time of the controller (1-9 seconds).

Usage of the Programming Button

1. Color Selection: Use the number keys 1-7 to store 7 colors. After selecting a color by pressing the RGB button press and hold the Color Save Buttons in sequence to save the current static color. (The color will be automatically saved to the corresponding button.)
2. Press the Programming Play Button to set 3 dynamic effects for the 1-7 static colors.(Single press to switch: Jump, Fade, Strobe)
   ExampLe 1:Red, Green, Blue, Yellow, Purple, Cyan, White Seven colors, Jump/Fade/Strobe
   ExampLe 2:Red, Blue Two colors, Jump/Fade/Strobe
   ExampLe 3:
   Red, White, Green, White 4, Blue Five colors, Jump/Fade/Strobe
   Note: R + B = Purple, R + G = Yellow, G + B = Cyan, R + G + B = White, R/G/B turned off together = Black
3. Press the Speed/Brightness +/- buttons briefly to control the mode brightness. There are 8 brightness levels in total, with the default level set to 5.
4. Press and hold the Mode Save Buttonto save the current static color + dynamic effect to one of the Mode Save Buttons (1-9).

Change Mode Selection List

CHA.	Color(Switch Colors via  )	Switch Between 3 Types via   Button Press
		Gxuma	Fade	I-Strobe
1	Mnyama
2	Okubomvu	Okubomvu okumile	I-Red Fade In and Out	I-Red Strobe
3	Okuhlaza	Okuhlaza Okumile	Okuluhlaza Kufiphala Ngaphakathi Nangaphandle	I-Green Strobe
4	Okuluhlaza okwesibhakabhaka	Okuluhlaza okwesibhakabhaka okumile	I-Blue Fade In and Out	I-Blue Strobe
5	Okuphuzi	Okuphuzi okumile	Yellow Fade In and Out	I-Yellow Strobe
6	Okunsomi	Okumhlophe Okumile	Purple Fade In and Out	I-Purple Strobe
7	I-Cyan	I-Static Cyan	Cyan Fade In and Out	I-Cyan Strobe
8	Emhlophe	Okumhlophe Okumile	Okumhlophe Kufiphala Ngaphakathi Nangaphandle	I-White Strobe
9	Okubomvu/Okuluhlaza/Okuluhlaza okwesibhakabhaka	I-Red-Green-Blue Jump	I-Red-Green-Blue Fade	Red-Green-Blue Strobe
10	Red/Green/Blue/Yellow/ Purple/Cyan/White	Seven-Color Jump	Seven-Color Fade	Seven-Color Strobe

Wiring Diagram for Receiver and Controller

Qaphela: One remote control can control an unlimited number of controllers

Setha Kabusha Umsebenzi Wenkinobho

• Reset Static Color:
  Turn off all channels, then press and hold the Color Save Button corresponding to the static color you want to reset to save. This will clear the current static color.
• Reset Dynamic Modes:
  Press and hold both the Color Save Button “5” and the Programming Play Button simultaneously until the indicator light flashes several times and then turns off. This indicates that all dynamic modes have been reset successfully.
• Synchronize the Remote Control’s Dynamic Modes to the Controller:
  Press and hold both the Color Save Button “1” and “4” until the indicator light flashes several times and then turns off. This indicates that all dynamic modes edited on the remote control have been fully synchronized to the controller.
  Note: If the dynamic modes of the remote control have been reset, you need to synchronize the reset dynamic modes of the remote control to the controller again. This avoids desynchronization between the remote control and the controller’s dynamic modes, which would cause abnormal effect issues.

Pair the Controller

Ukufanisa Ikhodi

1. Method 1: Button Code Matching
   Briefly press the Controller ID Learning Button; the load light will flash. Within 10 seconds, press and hold the Remote Control’s On/Off Button until the load light flashes slowly and then stays on. This indicates successful code matching.
2. Method 2: Power-On Code Matching
   Cisha isilawuli;
   After powering the controller on again, press and hold the On/Off Button on the remote control within 3 seconds until the load light flashes slowly and then stays on. This indicates successful code matching.

Ukusula Ikhodi

• Button Code Clearing Method:
  Press and hold the Controller ID Learning Button for 10 seconds. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.
• Power-On Code Clearing Method:
  Perform 10 consecutive power-on and power-off operations on the controller. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.

Isimo Sokukhanya Kwenkomba

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Qaphela: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Ezokuthutha kanye Nesitoreji

1.  Ezokuthutha
   Imikhiqizo ingathunyelwa ngezimoto, izikebhe nezindiza.
   Ngesikhathi sokuthutha, imikhiqizo kufanele ivikelwe emvuleni naselanga. Sicela ugweme ukushaqeka okukhulu nokudlidliza ngesikhathi sokulayisha nokukhipha.
2. Isitoreji
   Imibandela yokugcina kufanele ihambisane ne-Class I Environmental Standards. Imikhiqizo egcinwe isikhathi esingaphezu kwezinyanga eziyisithupha iyanconywa ukuthi iphinde ihlolwe futhi ingasetshenziswa kuphela ngemva kokuba isifanelekile.

Ukunakwa
Sicela usebenzise endaweni eyomile yasendlini;

• Uma ufaka ibhethri, sicela uxhume itheminali ephozithivu nenegethivu ngendlela efanele. Uma isilawuli kude singeke sisetshenziswe isikhathi eside, khipha ibhethri;
• Uma ibanga lifinyezwa futhi noma isilawulikude singasebenzi njalo, sicela ushintshe ibhethri kusenesikhathi;
• Sicela uyithathe ngokucophelela uyibeke phansi ukuze ugweme ukuwa okubangela umonakalo;
• Uma kwenzeka iphutha, sicela ungazami ukulungisa imikhiqizo uwedwa. Uma unombuzo, sicela uthinte abahlinzeki bakho.
• Leli bhukwana lingashintsha ngaphandle kwesaziso esengeziwe. Imisebenzi yomkhiqizo incike ezimpahleni. Sicela uzizwe ukhululekile ukuxhumana nabasabalalisi bethu abasemthethweni uma unemibuzo.

Isivumelwano sewaranti

Izikhathi zewaranti kusukela ngosuku lokulethwa: iminyaka emi-5.
Ukukhanda kwamahhala noma ukushintshwa kwezinsizakalo zezinkinga zekhwalithi zinikezwa phakathi nezikhathi zewaranti.

Ukukhishwa kwewaranti ngezansi:
Izimo ezilandelayo azikho phakathi kwebanga lesiqinisekiso sokukhanda kwamahhala noma ukushintshwa kwamasevisi:

• Ngaphandle kwezikhathi zewaranti;
• Noma yimuphi umonakalo owenziwe yi-high voltage, overload, or improper operations; Products with severe physical damage;
• Ukulimala okubangelwa izinhlekelele zemvelo kanye ne-force majeure;
• Amalebula esiqinisekiso namabhakhodi onakele.
• No any contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
2.  Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

ISEXWAYISO

• INGOZI YOKUGAKA: Lo mkhiqizo uqukethe iseli yenkinobho noma ibhethri lemali.
• UKUFA noma ukulimala okubi kungenzeka uma kudliwe.
• Iseli lenkinobho eligwinywe noma ibhethri lohlamvu lwemali lingabangela Ukushiswa kwamakhemikhali Kwangaphakathi esikhathini esingange amahora angu-2.
• GCINA amabhethri amasha nasetshenzisiwe ENGAFINYELI EZINGANE
• Thola usizo lwezempilo ngokushesha uma ibhethri lisolwa ukuthi ligwinywe noma lifakwe ngaphakathi kwanoma iyiphi ingxenye yomzimba.
• Susa futhi ngokushesha uwasebenzise kabusha noma ulahle amabhethri asetshenzisiwe ngokwemithetho yendawo futhi uqhelelane nezingane. UNGAwalahli amabhethri kudoti wasendlini noma emlilweni.
• Ngisho namabhethri asetshenzisiwe angabangela ukulimala okukhulu noma ukufa.
• Shayela isikhungo sendawo sokulawula ushevu ukuze uthole ulwazi lokwelashwa.
• The compatible battery type: CR2032.
• Ibhethri legama elingumthamotage: 3vc.
• Amabhethri angaphinde ashajwe akumele ashajwe kabusha.
• Ungaphoqi ukukhipha, ukushajwa kabusha, ukuqaqa, ukushisa ngenhla (isilinganiso sokushisa esishiwo umkhiqizi) noma shisa. Ukwenza kanjalo kungase kubangele ukulimala ngenxa yokuphuma umoya, ukuvuza noma ukuqhuma okuholela ekushiseni kwamakhemikhali.
• Qinisekisa ukuthi amabhethri afakwe ngendlela efanele ngokuvumelana ne-polarity (+ kanye -).
• Ungawahlanganisi amabhethri amadala namasha, amabhrendi ahlukene noma izinhlobo zamabhethri, njenge-alkaline, i-carbon-zinc, noma amabhethri aphinde ashajwe.
• Susa futhi ngokushesha ugaye kabusha noma ulahle amabhethri ezintweni ezingasetshenzisiwe isikhathi eside ngokwemithetho yendawo.
• Hlala uvikela ngokuphelele indawo yebhethri. Uma ingxenye yebhethri ingavaleki ngokuphephile, yeka ukusebenzisa umkhiqizo, khipha amabhethri, futhi uwagcine kude nezingane.

imibuzo ejwayelekile ukubuzwa

How many colors can be stored in the remote?

You can store up to 7 colors in the remote using the number keys 1-7.

How many brightness levels are available?

There are 8 brightness levels in total, with the default level set to 5.

Can one remote control multiple controllers?

Yes, one remote control can control an unlimited number of controllers.

Amadokhumenti / Izinsiza

LTECH M9 LED Controller [pdf] Incwadi Yeziqondiso M9 LED Controller, M9, LED Controller, Controller

Izithenjwa

• Imaniwali yosebenzisayo