1746R0817 Iluphu ye-LED Yokuphulukisa Uhlelo Lokukhanya 

UKUQALA OKUSHESHAYO IZIYALELO

The handpiece arrives in a locked state for shipping.

Plug in the charging base, then place the handpiece in the charging base to automatically unlock the handpiece.

Sebenzisa i-Loop™ protective eye shield kanye nemikhono yezivikelo ye-Loop™. Uma umkhono wesivikelo esivikelayo ungasetshenziswa, bheka Imiyalelo Yokusetshenziswa ukuze uguqule isilungiselelo se-Protective Barrier Sleeve ukuthi IVALI.

Ukuze uthole imiyalelo ephelele, bheka Imiyalelo Yokusetshenziswa. Landela imiyalelo yokuqala yokusetha futhi uyishaje ngokugcwele iyunithi amahora amathathu ngaphambi kokuyisebenzisa okokuqala.

Ukusetha kokuqala: 

1. Vula noma vala isici se-loop evaliwe ngokucindezela futhi ubambe inkinobho yemenyu imizuzwana emi-2. (Isilungiselelo esizenzakalelayo sokukhanya kwe-Loop sinesici esivaliwe.)
2. Khetha i-irradiance oyifunayo usebenzisa inkinobho ye-Menu.
3. Khetha inani lesikhathi ngemizuzwana ukuze uthole ukwelashwa usebenzisa inkinobho ethi Khetha.
4. Cindezela inkinobho ethi Qala/Misa ukuze uqale ukwelapha.
5. Uma isici se-close-loop sivuliwe: Uma ilensi ibekwe phakathi kuka-3 kuya ku-4 mm wendawo eqondiwe, umjikelezo wokwelapha uzoqala. Uma ilensi ibekwe kude kakhulu, izongena i-Auto Start (i-pulsing light). Kulesi simo, qondanisa kahle futhi wehlise ilensi eduze nendawo okuvumela umjikelezo wokwelapha ukuthi uqale ngokuzenzakalelayo.
6. Ukwelapha okuphelele okuyimpumelelo kubonisa indingilizi eluhlaza enophawu lokuhlola kanye nama-joule aphelele alethiwe
   

Display screen during the cure

• Power bars show relative power output
• Selected cure time in seconds
• Progress bar shows passage of actual cure time
  

UKUSEBENZA IZINKONZO

Vula/Vuka: Press any button to turn on the handpiece.

	Imenyu:	Press to select light irradiance or menu options. Press & hold to cycle closed-loop ON/OFF.
	Khetha	Press to select cure time or setting options. Press & hold to access preset settings.
	Qala/ misa:	Press to start or stop a cure. Press & hold to activate Tack mode.
	Enter/Exit Settings:	Press and release both buttons simultaneously to enter or exit Settings.
	Vala:	Press and hold simultaneously for 3 seconds (or until screen goes black) to force a shutdown and turn off.

UHLELO

Imodi yokubuyisela eqondile iyisilungiselelo esizenzakalelayo futhi ilungele zonke izinto zamazinyo eselashwe ngokukhanya.

Irradiance (mW/cm2)	Izikhathi Zomjikelezo Ezitholakalayo (amasekhondi)
1,000*	5,10,15, 20*
2,000	5,10
3,000	3,5

Imodi ye-Tack iletha ukukhanya okufushane kokunamathisela okunamathelayo.

Irradiance (mW/cm2)	Izikhathi Zomjikelezo Ezitholakalayo (amasekhondi)
1,000	3

*Izilungiselelo ezizenzakalelayo

I-Multiband spectrum kububanzi be-wavelength obungu-390–480nm. 

Cindezela bese ubamba inkinobho ethi Khetha ukuze ugxume ngokushesha phakathi kwama-irradiance amabili atholakalayo kanye nokusetha ngaphambilini kwesikhathi.

Setha ngaphambilini 1: 20 seconds, 1,000 mW/cm2

Setha ngaphambilini 2: 5 seconds, 2,000 mW/cm2

Ividiyo Yokuqala Ngokushesha

Ukuze uthole imiyalelo ephelele yokusetha skena ikhodi ye-QR kuleli khasi.

i-garrison.dental/LoopQuickStartGuide

USEKELO LWEKHASIMENDE

Ihhovisi lase-USA
150 DeWitt Lane
Spring Lake, MI 49456, USA
616.842.2244
888.437.0032
Yenzelwe i-Garrison Dental Solutions
www.garrisondental.com/patents
 Euro link Europe Compliance Limited
25 Indawo kaHerbert
Dublin, D02 AY86, Republic of Ireland
I-SRN: IE-AR-000002852
1746r0817 rev H July2025

Amadokhumenti / Izinsiza

Loop 1746R0817 Loop LED Curing Light System [pdf] Umhlahlandlela Womsebenzisi 1746R0817 Loop LED Curing Light System, 1746R0817, Loop LED Curing Light System, LED Curing Light System, Curing Light System, Light System

Izithenjwa

• Imaniwali yosebenzisayo