I-LOCKWOOD FE Series Panic Phuma Kudivayisi nge-Nightlatch

UKULUNGISWA KOMNYANGO

• Nquma ubude bedivayisi yokuphuma ethukile:
  Ekufakweni okusha, 900 – 1100mm ngaphezu kwe-FFL kuyanconywa.
• Usebenzisa ithempulethi 1 enikeziwe, qedela ukulungiswa komnyango we-nightlatch.
• I-eksisi B kufanele ibe nkulu kuno-50mm ukusuka kuhlaka lomnyango. Qinisekisa ukuthi ibanga elingu-A~B alikho ngaphezu kuka-80mm ubude kune-extrusion yedivayisi yokuphuma yokwethuka.
  Geza izimbobo zokuhlola ohlangothini lwehinge lomnyango usebenzisa Isifanekiso 2.

  

PHUMA YI-PANIC PHUMA YEDIVAYISI IHLOKO NOKUFAKA I-NIGHTLATCH

• Nquma ubude bebha yomsila elungele ukufakwa futhi usikwe uma kudingeka. Qinisekisa ukuthi ibha yomsila ayiphumi ngaphezu kuka-8-10mm ukusuka ku-mounting plate ngakolunye uhlangothi lomnyango.
• Vikela i-nightlatch kanye ne-mounting plate ngezikulufo ze-MS countersunk.
• Thepha kancane i-adaptha yepulasitiki nge-mallet yerabha kuhabhu yokuphotha yenhloko yokuphuma ethukile ize ihlale phansi nehabhu. Qinisekisa ukuthi i-slot ku-adaptha ivundlile.
• Faka inhloko yokuphuma ethukile emnyango ngezikulufu ezine ze-pan 04.8 x 25mm nge-mounting plate.
• Hlehlisa i-latch ngokugcwele ukuze ilingane nekhava ekhanda. Vikela ikhava ngezikulufo ezi-2 zokulungisa.

  

HINGE SIDE PLATE FITMENT

• Faka izikulufu ezimbili ezimaphakathi ngepuleti elingemuva kuzimbobo zokuhlola ukusuka kusifanekiso 2.
• Ungashayeli izikulufu ngokugcwele, ushiye igebe elingu-5mm phakathi kwekhanda lesikulufa nepuleti.

  

I-PAnic PHUMA UKUSIKA IBHA YEDIVAYISI

• Linganisa ibanga elingu-A~B, sika ibha yedivayisi yokuphuma yokuthuthumela iye ku-A~B ngaphansi kuka-80mm.
• Qinisekisa ukuthi ukusikwa kuyisikwele futhi yonke imfucumfucu iyasuswa kubha.

  

UMHLANGANO WAMABHA

• Faka amakepisi kubha nhlangothi zombili.
• Vikela ikepisi ngesikulufu sokulungisa.
• Faka izinduku kubha, uqinisekise ukuthi induku ene-O-ring ifakwe emgodini ongaphezulu. Thepha kahle ngesando kuze kube yilapho izinduku zishaya esitobhini esiqinile.

  

UKUFAKA IBHA

• Faka umshini oseceleni wehinge kubha uqinisekise ukuthi intwasahlobo ibambene nembobo eyisikwele futhi induku engezansi ifakwa emgodini wayo ofanayo.
• Ngenkathi uqondanisa izinti zangaphambili ekhanda eliphumayo elithuthumelayo, faka imbobo yokhiye eseceleni kwehinge phezu kwezikulufu bese uphushela yonke indlela ku-nightlatch.
• Qinisa izikulufu futhi uhlole umsebenzi wedivayisi yokuphuma ethukile.
• Geza izimbobo zokuhlola ezimbili ezingu-03 x 25 bese ufaka izikulufu ukuze uvikele indlela eseceleni yehinge.
• Faka ikhava futhi ulungise ukuma ukuze uqondanise ikhava ne-mounting plate uma kudingeka. Vikela ikhava ngesikulufu sokulungisa.

  

UKUFAKA ISIteleka

• Sicela uqaphele ukuthi lokhu kufakwa kwesiteleka okweminyango encishisiwe kuphela, ubukhulu obuncane obungu-22mm. Uma ukufaka kungasebenzi, sicela ubhekisele ekuphumeni kokwethuka kwe-FLUID kwasekuqaleni
  amashidi eziyalezo zedivayisi.
• Qinisekisa ukuthi ukuphakama kwesikhungo sesiteleka kuhambisana ne-Axis C.
• Ukuhlanganiswa kokuhlola ukuze uqinisekise ukuthi idivayisi yokuphuma ethukile ikhululwa kalula lapho ibha icindezelekile.

  

ISITHOMBE 1

ISITHOMBE 2

ASSA ABLOY Australia Pty Limited, 235 Huntingdale Rd, Oakleigh, VIC 3166 ABN 90 086 451 907 ©2021 Izwa umhlaba ophephile novuleke kakhudlwana

Amadokhumenti / Izinsiza

I-LOCKWOOD FE Series Panic Phuma Kudivayisi nge-Nightlatch [pdf] Umhlahlandlela wokufaka I-FE Series, I-Panic Exit Device ene-Nightlatch, Idivayisi Yokuphuma Yethukile, Phuma Kudivayisi, Phuma Ngokwethuka, Phuma

Izithenjwa

• Imaniwali yosebenzisayo