I-LIGHTRONICS TL Series TL4008 Memory Control Console

Ulwazi Lomkhiqizo

Igama Lomkhiqizo	I-TL4008 MEMORY CONTROL CONSOLE
Umkhiqizi	Inkampani Lightronics Inc.
Inguqulo	1.7
Usuku	06/28/2022
Amamodi Okusebenza	8 noma 16 kuye ngemodi
Inombolo Yeziteshi	8 CH x 2 izigcawu zamanuwali noma 16 CH x 1 isigcawu esenziwe ngesandla noma 8 CH no-8 izigcawu ezirekhodiwe
Inkumbulo Yendawo	8 izigcawu seziphelele
I-Chase Control Protocol	I-DMX512 ejwayelekile (Inketho ye-LMX-128 multiplex)
Isixhumi Sokukhipha	Izikhonkwane ezi-5 ze-XLR zowesifazane ze-DMX (Engeza ku-3 pin XLR we-LMX)
Ukuhambisana	Iphrothokholi ye-DMX512 ne-LMX-128 iyahambisana nezinye i-multiplex izinhlelo
Okokufaka Amandla	12 VDC, 1 Amp ukunikezwa kwamandla kwangaphandle enikeziwe
Ubukhulu	10.25WX 9.25DX 2.5H
Isisindo	4.4 Amakhilogremu

Imiyalo yokusetshenziswa komkhiqizo

Ukufakwa

Ikhonsoli yokulawula ye-TL4008 kufanele igcinwe kude nomswakama kanye nemithombo yokushisa eqondile.

I-TL4008 ingase inikwe amandla ukunikezwa kwangaphandle ngokucaciswa okulandelayo:

• Okukhipha Umqtage: 12 VDC
• Okukhiphayo Okwamanje: 800 Milliamps ubuncane
• Isixhumi: 2.1mm isixhumi sowesifazane
• Iphinikhodi emaphakathi: I-polarity enhle (+).

Izixhumanisi ze-DMX
Xhuma iyunithi ku-DMX Universe usebenzisa ikhebuli yokulawula enezixhumi ezingu-5 ze-XLR. Ukunikezwa kwamandla kwangaphandle kufanele kusetshenziswe uma kusetshenziswa i-DMX kuphela. Isixhumi se-XLR samaphini angu-3 se-DMX esikhundleni samaphini angu-5 we-XLR siyinketho lapho u-oda.

Izintambo zesixhumi se-DMX 5 Pin/3

I-PIN #	I-PIN #	IGAMA LESIBILI
1	1	Okuvamile
2	2	Idatha ye-DMX -
3	3	Idatha ye-DMX +
4	-	Ayisetshenziswa
5	-	Ayisetshenziswa

I-LMX Connections (Uma ikhona)
Xhuma iyunithi kusifiphali se-Lightronics (noma esihambisanayo) usebenzisa ikhebula lokulawula eliphindaphindekayo elinezixhumi ezingu-3 ze-XLR. I-TL4008 inganikwa amandla yi-dimmer exhunywe kuyo. Ingase futhi inikwe amandla ngokusebenzisa ugesi wangaphandle onikeziwe. Iyunithi izosebenza ngama-dimmers kuzo zombili izindlela ze-NSI/SUNN kanye ne-Lightronics.
Wonke ama-dimmers axhunywe kuxhumo lwe-LMX KUFANELE abe kumodi OKUFANAYO.

Intambo yesixhumi se-LMX-128

I-PIN #	IGAMA LESIBILI
1	Okuvamile
2	Amandla e-Phantom avela kuma-dimmers (Imvamisa +15 VDC)
3	Isignali ye-LMX-128 multiplex

Izinkinobho nezinkomba

Chasha 1 & 2 Izinkinobho

Cindezela ukuze ukhethe amaphethini wokujaha. I-chase LED izokhanya uma ukujaha kusebenza.

Chase Rate Inkinobho

Cindezela izikhathi ezi-3 noma ngaphezulu ngesilinganiso osifunayo ukuze usethe isivinini sokujaha.
I-LED yezinga lokujaha izokhanya ngenani elikhethiwe.

Inkinobho Yokuvala
Ukucindezela inkinobho kubangela zonke iziteshi, izigcawu, nokujaha ukuthi kufinyelele ku-zero umfutho. I-blackout LED izokhanya noma nini lapho ikhonsoli ikumodi yokucima ukoma.

Inkomba ye-Blackout
Ikhanyisa uma ubumnyama busebenza.

Inkinobho Yokuqopha
Cindezela ukuze urekhode izigcawu futhi ujahe amaphethini. Irekhodi le-LED lizokhanya uma likumodi yokurekhoda.

Inkomba yokuqopha
Kuyabaneka uma ukujaha noma ukurekhodwa kwesigcawu kusebenza.

MEMORY ULAWULO IKHONZO

INCWADI YOMNINI

Inani leziteshi

• 8 noma 16 kuye ngemodi

Amamodi okusebenza

• 8 CH x 2 izigcawu zezandla
• 16 CH x 1 isigcawu semanuwali
• 8 CH nezigcawu ezirekhodiwe eziyi-8

Inkumbulo yesigcawu

• 8 izigcawu seziphelele

Chase

• 2 ehlelekayo 40 izinyathelo jaha

Iphrothokholi yokulawula

• I-DMX512 ejwayelekile
• I-LMX-128 ngokuzithandela (multiplex)
• Isixhumi esiphumayo esingu-5 pin female XLR se-DMX
• Izinketho Engeza ku-3 pin XLR ye-LMX
• I-Sole 3 pin XLR ye-DMX

Ukuhambisana

• DMX512
• Iphrothokholi ye-LMX-128 iyahambisana namanye amasistimu wokuphindaphinda

Okokufaka kwamandla

• 12 VDC, 1 Amp ngaphandle
• ugesi onikeziwe

Ubukhulu

• 10.25″WX 9.25″DX 2.5″H

Isisindo

• 4.4 Amakhilogremu

Inketho ye-LMX-128 ayikwazi ukuhlanganiswa ne-3 pin XLR yenketho ye-DMX.

UKUFAKA

Ikhonsoli yokulawula ye-TL4008 kufanele igcinwe kude nomswakama kanye nemithombo yokushisa eqondile.
I-TL4008 ingase inikwe amandla ukunikezwa kwangaphandle ngokucaciswa okulandelayo:

• Okukhipha Umqtage: 12 VDC
• Okukhiphayo Kwamanje: 800 millionamps ubuncane
• Isixhumi: 2.1mm isixhumi sowesifazane
• Iphinikhodi emaphakathi: I-polarity enhle (+).

DMX IZIXHUMANO: Xhuma iyunithi ku-DMX Universe usebenzisa ikhebuli yokulawula enezixhumi ezingu-5 ze-XLR. Ukunikezwa kwamandla kwangaphandle kufanele kusetshenziswe uma kusetshenziswa i-DMX kuphela. Isixhumi se-XLR samaphini angu-3 se-DMX esikhundleni samaphini angu-5 we-XLR siyinketho lapho u-oda.

I-DMX 5 PIN/3 INDLELA YOKUXHUMANISA IPHINIKHODI

I-PIN #	I-PIN #	IGAMA LESIBILI
1	1	Okuvamile
2	2	Idatha ye-DMX -
3	3	Idatha ye-DMX +
4	-	Ayisetshenziswa
5	-	Ayisetshenziswa

LMX IZIXHUMANO: (Uma kusebenza) Xhuma iyunithi kusifiphali se-Lightronics (noma esihambisanayo) usebenzisa ikhebuli yokulawula ephindaphindayo enezixhumi ze-XLR ezingamaphini angu-3. I-TL4008 inganikwa amandla yi-dimmer exhunywe kuyo. Ingase futhi inikwe amandla ngokusebenzisa ugesi wangaphandle onikeziwe. Iyunithi izosebenza ngama-dimmers kuzo zombili izindlela ze-NSI/SUNN kanye ne-Lightronics. Wonke ama-dimmers axhunywe kuxhumo lwe-LMX KUFANELE abe kumodi EFANAYO.

Intambo yesixhumi se-LMX-128

I-PIN #	IGAMA LESIBILI
1	Okuvamile
2	Amandla e-Phantom avela kuma-dimmers Ngokuvamile abe +15 VDC
3	Isignali ye-LMX-128 multiplex

Uma kokubili i-DMX ne-LMX zifakiwe, i-TL4008 izodlulisa kokubili i-DMX ne-LMX ngesikhathi esisodwa.

UKUSEBENZA

INkomba KANYE NEZILAWULO

• X Faders: Ilawula amaleveli esiteshi ngasinye eziteshini 1-8.
• Y Faders: Ilawula amaleveli ezigcawu noma amashaneli ngamanye kuye ngemodi yokusebenza ye-'Y' yamanje.
• Inkinobho yemodi ka-Y: Ikhetha imodi yokusebenza ye-Y faders.
• Inkomba yemodi engu-Y: Ibonisa imodi yokusebenza yamanje yamafader angu-Y.

Ama-Cross Faders: Lokhu kunikeza ikhono lokufiphala phakathi kwamafader angaphezulu (X) kanye namafader aphansi (Y). Umsebenzi we-cross fade uhlukana ube izingxenye ezimbili okukunika amandla okulawula izinga lamaqembu aphezulu naphansi we-fader ngayinye. Kuwo wonke amamodi, i-X cross fader kumele ibe PHEZULU ukuze ivule amafader angaphezulu futhi isiphambano esingu-Y kumele sibe PHANSI ukuze senze amafader aphansi asebenze.

• Umfundisi: Ilawula izinga lokuphumayo layo yonke imisebenzi yekhonsoli.
• Izinkinobho ze-Bump: Ivula amashaneli 1 kuya ku-8 ngenkathi icindeziwe. I-master fader ithinta izinga lamashaneli enziwe asebenze izinkinobho ze-bump. Izinkinobho ze-bump azisebenzisi izigcawu.
• Chase Khetha: Ivula futhi ivale ukujaha.

www.lightronics.com

• Chase 1 & 2 Izinkinobho: Cindezela ukuze ukhethe amaphethini wokujaha. I-chase LED izokhanya uma ukujaha kusebenza.
• Inkinobho ye-Chase Rate: Cindezela izikhathi ezi-3 noma ngaphezulu ngesilinganiso osifunayo ukuze usethe isivinini sokujaha. I-LED yezinga lokujaha izokhanya ngenani elikhethiwe.
• Inkinobho ye-Blackout: Ukucindezela inkinobho kubangela zonke iziteshi, izigcawu kanye nokujaha ukuthi kufinyelele ku-zero umfutho. I-blackout LED izokhanya noma nini lapho ikhonsoli ikumodi yokucima ukoma.
• Inkomba ye-Blackout: Ikhanyisa uma ubumnyama busebenza.
• Inkinobho Yokuqopha: Cindezela ukuze urekhode izigcawu futhi ujahe amaphethini. Irekhodi le-LED lizokhanya uma likumodi yokurekhoda.
• Inkomba yokuqopha: Iyabaneka lapho ukujaha noma ukuqoshwa kwesigcawu kusebenza.

'Y' IZINDLELA ZOKUSEBENZA
I-TL4008 inezindlela ezintathu ezihlukene eziphathelene nama-Y fader. Ukucindezela inkinobho ethi “Y MODE” kushintsha umsebenzi wezifaniso zika-Y (eziyisishiyagalombili eziphansi). Imodi ekhethiwe ikhonjiswa ama-LED wemodi ye-Y. U-X (amafada ayisishiyagalombili aphezulu) UHLALA alawula izinga lamashaneli 1 kuya ku-8. Izindlela ezintathu zokusebenza zika-Y yilezi:

• I-CHAN 1 – 8: Yomibili imigqa engu-X kanye no-Y yamafader alawula amashaneli 1 kuya ku-8. Ifader eyisiphambano isetshenziselwa ukudlulisa ukulawula phakathi kuka-X no-Y.
• I-CHAN 9 – 16: Y faders ilawula iziteshi 9 kuya ku-16.
• ISIGCAWU 1 – 8: Y fader ilawula ukushuba kwezigcawu ezirekhodiwe eziyi-8.

UKUHLELWA KOKUQALA
I-Chase Reset (Isetha kabusha ukujaha ukuya kokumisiwe okuhleliwe kwasembonini): Khipha amandla kuyunithi. Cindezela phansi izinkinobho ze-CHASE 1 kanye ne-CHASE 2. Faka amandla kuyunithi ngenkathi ubambe lezi zinkinobho phansi. Qhubeka ubambe izinkinobho cishe amasekhondi angu-5, bese uyakhulula.

Sula Isigcawu (Isula zonke izigcawu): Susa amandla kuyunithi. Cindezela inkinobho ethi REKHODI. Faka amandla kuyunithi ngenkathi ubambe le nkinobho phansi. Qhubeka ubambe inkinobho cishe amasekhondi angu-5, bese uyakhulula.
Kufanele uhlole izilungiselelo zekheli zama-dimmers ngaphambi kokuqhubeka nokusebenza kwe-TL4008.

Inguqulo 1.7 UKUREKHODA CHASES

1. Cindezela inkinobho ethi "REKHODI", i-LED yerekhodi izokhanya.
2. Cindezela inkinobho ethi “CHASE 1” noma “CHASE 2” ukuze ukhethe ukujaha ozoqopha kukho.
3. Sebenzisa amafafa eziteshi ukuze usethe i(iziteshi) ofuna ukuba UVULA kulesi sinyathelo ukuthi zibe namandla agcwele.
4. Cindezela inkinobho ethi "REKHODA" ukuze ulondoloze isinyathelo futhi uye esinyathelweni esilandelayo.
5. Phinda izinyathelo 3 no-4 kuze kuqoshwe zonke izinyathelo ozifisayo (kufika ezinyathelweni ezingama-40).
6. Cindezela inkinobho ethi “CHASE 1” noma “CHASE 2” ukuze uphume kumodi yokurekhoda yokujaha. *Akudingekile uma zonke izinyathelo ezingama-40 zirekhodiwe.

CHASE UKUDLALA

1. Cindezela inkinobho ethi “RATE” izikhathi ezi-3 noma ngaphezulu ngesilinganiso osifunayo ukuze usethe isivinini sokujaha.
2. Cindezela inkinobho ethi “CHASE 1” noma inkinobho ethi “CHASE 2” ukuze uvule futhi uvale ukujaha.
   Qaphela: Kokubili ukujaha kungase kuqhubeke ngesikhathi esisodwa. Uma ukujaha kunenani elihlukile lezinyathelo, amaphethini okushintsha ayinkimbinkimbi angadalwa.

IZIGCAWU ZOKUREKHODA

1. Sebenzisa izinketho zemodi ye-“CHAN 1– 8” noma “CHAN 9-16” Y bese udala isigcawu ukuthi sirekhodwe ngokusetha amafada kumazinga afunekayo.
2. Cindezela okuthi “REKHODI”.
3. Cindezela inkinobho ye-bump ngezansi kwefader engu-Y ofisa ukuqopha isigameko kuyo.

Qaphela: Izigcawu zingase futhi zirekhodwe kumodi ethi “ISIGCAWU 1-8”. Lokhu kukuvumela ukuthi ukopishele isiqephu kwesinye noma udale ngokushesha izinguqulo ezilungisiwe zezigcawu. Ukurekhoda kwenzeka noma ngabe i-BLACKOUT ivuliwe noma isifafa esiyinhloko siphansi.

UKUDLALA KWESIGCAWU

1. Yenza kusebenze inketho yemodi ye-“SCENE 1-8” Y.
2. Letha i-fader kumugqa ongezansi (Y fader) enesigcawu esirekhodwe kuso.

Qaphela: Ifader eyisiphambano ethi “Y” kufanele ibe PHANSI ukuze usebenzise izifanisi ezingezansi (Y).

UKUQALA OKUSHESHAYO IZIYALELO

Ikhava engezansi ye-TL4008 iqukethe imiyalelo emifushane yezigcawu nokujaha. Imiyalo ayihloselwe ukuthatha indawo yaleli bhukwana futhi kufanele viewihlelwe “njengezikhumbuzi” zabasebenzisi asebejwayelene nokusebenza kwe-TL4008.

UKUNIKELA NOKULUNGISA

UKUXOXA IZINKINGA 

1. Hlola ukuthi ikhebuli ye-DMX/LMX ayinasici yini.
2. Ukwenza lula ukuxazulula izinkinga – setha kabusha iyunithi ukuze inikeze isethi yezimo ezaziwayo.
3. Qinisekisa ukuthi amaswishi e-dimmer abekwe eziteshini ozifunayo.

UKUDLA UMNIKAZI
Indlela engcono kakhulu yokwelula impilo ye-TL4008 yakho ukuyigcina yomile, ipholile, ihlanzekile futhi imboziwe uma ingasetshenziswa.
Ingaphandle leyunithi lingahlanzwa kusetshenziswa indwangu ethambile dampefakwe okokugeza okuthambile/ingxube yamanzi noma isihlanzi sohlobo esifuthwe esithambile. UNGAFAKAZI NOMA ILUPHI UCWAKAZI ngqo eyunithi. UNGAGCINISI iyunithi kunoma yiluphi uketshezi noma uvumele uketshezi ukuthi lungene kuzilawuli. UNGASEBENZISI noma yiziphi izihlanzi ezisuselwe ku-solvent noma ezilimazayo eyunithi.
Ama-fader awahlanzeki. Uma usebenzisa i-cleaner kuzo - izosusa i-lubrication ezindaweni ezishelelayo. Uma lokhu sekwenzekile akwenzeki ukuthi uphinde uwagcobe.
Imichilo emhlophe ngenhla kwamafader ayimbozwanga iwaranti ye-TL4008. Uma umaka kuzo ngomunye uyinki unomphela, upende njll. kungenzeka ukuthi ngeke ukwazi ukususa izimpawu ngaphandle kokulimaza imicu.
Azikho izingxenye ezisebenzisekayo zomsebenzisi kuyunithi. Isevisi eyenziwa ngaphandle kwabenzeli abagunyaziwe be-Lightronics izosusa iwaranti yakho.

USIZO LOKUSEBENZA KANYE LOLONDOLOZO
Umthengisi kanye nabasebenzi be-Lightronics bangakusiza ngezinkinga zokusebenza noma zokulungisa. Sicela ufunde izingxenye ezisebenzayo zaleli bhukwana ngaphambi kokucela usizo. Uma isevisi idingeka - xhumana nomthengisi othenge kuye iyunithi noma uthinte uMnyango Wesevisi we-Lightronics, 509 Central Drive, Virginia Beach, VA 23454 TEL: 757-486-3588.

ULWAZI LWEWARANTI KANYE UKUBHALISA – CHOFOZA ISIXHUMANISI NGEZANSI
www.lightronics.com/warranty.html

Amadokhumenti / Izinsiza

I-LIGHTRONICS TL Series TL4008 Memory Control Console [pdf] Incwadi Yomnikazi I-TL4008 Memory Control Console, TL4008, Ikhonsoli Yokulawula Imemori, Ikhonsoli Yokulawula, Ikhonsoli

Izithenjwa

• Imaniwali yosebenzisayo