ldt-infocenter TT-DEC Turn Table Decoder

Isandulelo / Umyalo Wokuphepha:

Uthenge i-TurnTable-Decoder TT-DEC yemodeli yakho yesakhiwo sikaloliwe esihlinzekwe ngaphakathi kwe-assortment ye-Littfinski DatenTechnik (LDT).

Sifisela wena ube nesikhathi esihle sokusetshenziswa kwalo mkhiqizo!

Iyunithi ethengiwe iza newaranti yezinyanga ezingama-24 (ukufaneleka kwemojuli eqediwe ecaleni kuphela).

• Sicela ufunde lo myalelo ngokucophelela. Ngomonakalo odalwe ukungawunaki lo myalelo ilungelo lesiqinisekiso sokufuna lizophelelwa yisikhathi. Akukho sikweletu esizothathwa ngomonakalo owumphumela. Ungalanda leli bhukwana njenge-PDF-file ngezithombe ezinemibala ezivela endaweni ethi "Okulandiwe" endaweni yethu Web Isayithi. I file ingavulwa nge-Acrobat Reader.
  Imifanekiso eminingi kule ncwadi ihlotshaniswa ne-a file igama (isb. ikhasi_526).
  Ungazithola lezo files kithi Web-Indawo engxenyeni ethi “Sample Connections” ye-Turntable-Decoder TT-DEC. Ungalanda ifayela le files njenge-PDF-File futhi wenze ukuphrinta okunemibala ngefomethi ye-DIN A4.
• Qaphela: Yenza noma yikuphi ukuxhumana kuphela ngesakhiwo sikaloliwe esinqanyuliwe (cisha ama-transformer noma unqamule ipulaki enkulu).

Ukukhetha i-turntable etholakalayo:

I-TurnTable-Decoder TT-DEC ilungele isicelo ku-Fleischmann turntables 6052, 6152, 6154, 6651, 9152, 6680 (ngayinye eno-“C” nangaphandle kwayo) kanye no-6652 (ene-3-rail conductor), i-Roco turntable, 35900 kanye naku-Märklin Turntable 7286.
Ngakwesokudla phakathi kwekhava yezindlu kanye nosinki wokushisa we-TT-DEC kunebha yamaphinikhodi angu-5 ephawulwe nge-JP1. Sicela ususe ikhava yendlu ngokwenza lokhu kulungiswa okulandelayo.
I-Ex-factory izoba ama-jumper amabili afakwe kule pin bar. I-jumper eyodwa ngakwesobunxele ne-jumper eyodwa kwesokudla. Iphinikhodi emaphakathi izobe ingenamuntu. Uhlaka 2.3. khombisa ukulungiswa kwe-Fleischmann turntable 6154, 6680 noma 6680C kanye ne-Roco turntable 35900 yegeji ye-TT enezixhumi zethrekhi ezingaba ngu-24.
Uma usebenzisa i-Fleischmann turntable yegeji N noma i-H0 enoxhumo lwamathrekhi angu-48 (6052, 6152, 6651, 6652 no-9152 – ngayinye eno-“C” nangaphandle kwayo) sicela ufake i-jumper njengoba kuboniswe ngezansi ngaphansi kuka-2.2.
Uma ufuna ukusebenzisa i-TurnTable-Decoder TT-DEC kanye ne-Märklin turntable 7286 sicela ufake i-jumper njengoba kuchazwe ngaphansi kuka-2.1.

I-Märklin Turntable 7286:

I-jumper kufanele ibekwe phezu kwezikhonkwane ezimakwe ngo-1 no-2.
I-jumper yesibili ehlinzekwa kanye nesethi ngeke idingeke.

I-Fleischmann turntable ye-gauge N noma i-H0 enoxhumo lwamathrekhi angu-48:

I-jumper kufanele ibekwe phezu kwezikhonkwane ezimakwe ngo-2 no-3.
I-jumper yesibili ehlinzekwa kanye nesethi ngeke idingeke.

I-Fleischmann turntable 6154, 6680 noma i-6680C ne-Roco turntable 35900 (igeji TT) enoxhumo lwamathrekhi angu-24:

I-jumper eyodwa kufanele ibekwe phezu kwezikhonkwane eziphawulwe u-2 no-3 ohlangothini lwesobunxele futhi i-jumper yesibili ibekwe ohlangothini lwesokudla olumakwe nge-JP1 (ukulungiselelwa kwasefekthri).

Ukuxhuma i-TT-DEC esakhiweni sedijithali naku-turntable:

• Ulwazi Olubalulekile: Vala ugesi ngaphambi kokwenza noma yimuphi umsebenzi wokuxhuma (cisha wonke ama-transformer noma ukhiphe ipulaki enkulu).

Ixhuma i-TT-DEC esakhiweni sedijithali:

I-TurnTable-Decoder TT-DEC ithola ukunikezwa kwamandla ngama-cl amabiliamps ohlangothini lwesobunxele kakhulu 11-izigxobo uxhumano clamp. Umqulutage ingaba phakathi kuka-16 no-18 Volt~ (okushintshiwe voltage yesiguquli sikaloliwe esiyimodeli). Kokubili i-clamps amakwe ngokufanele. Kungenjalo, i-TurnTable-Decoder ingasetshenziswa ne-DC voltage ka-22…24V= kunoma iyiphi i-polarity.
Idikhoda ithola ulwazi lwedijithali ngeklasi yesithathu neyesineamp (kubalwa kusukela ohlangothini lwesobunxele) we-11-poles uxhumano clamp. Nikeza ulwazi lwedijithali ngokuqondile kusuka kuyunithi yokulawula noma kusukela ku-booster ngokulandelanayo kusukela kumqhubi weringi yedijithali "ukushintsha" okuxhunywe kuwo wonke amadekhoda wezisekeli. Ukuqinisekisa ukuthi i-TT-DEC ithola idatha engenaziphazamiso ungathathi ulwazi lwedijithali ngqo kumareyili.
Enye yama-digital cl amabiliamps imakwe ngokubomvu kanye no-K kanti enye imakwe ngokunsundu kanye no-J. Imibala ebomvu nensundu ngokulandelana ukumaka J no-K kuzosetshenziswa iziteshi eziningi zokuyala.
I-LED ebomvu izokhanya ngemva kokukhanyisa amandla kuze kube yilapho idikhoda ibona ivolumu yedijithalitage okokufaka kwedijithali. Khona-ke i-LED ebomvu izokhanya njalo.

Ukuxhuma i-TT-DEC ku-turntable ye-Fleischmann 6052, 6152, 6154, 6651, 6652, 9152 noma 6680 (ngayinye eno-“C” nangaphandle kwayo) kanye ne-Roco
i-turntable 35900:

Wonke ama-turntable e-Fleischmann kanye ne-Roco turntable 35900 aqukethe iflethi elinezigxobo ezi-5
ikhebula iribhoni. Izintambo ezimbili eziphuzi ohlangothini lwesokudla ezokuphakelwa kuzo zombili izinsimbi zamabhuloho. Ukuze kube nokuxhumana okulula lezi zintambo zingaxhunywa kumqhubi weringi wedijithali "drive".
Uma ufuna ukushintsha i-polarity yamareyili ebhuloho ngokuzenzakalelayo nge-TurnTableDecoder TT-DEC (izinkinga zeluphu ehlehlayo ngokujika kwebhuloho elingu-180º) izintambo ezimbili kufanele zithole ukunikezwa kwamanje kwedijithali kuyunithi yokushintsha amandla unomphela i-DSU (DauerStromUmschalter) . Ulwazi olwengeziwe luyatholakala ngaphakathi kwesahluko esithi “Shintsha i-polarity yethrekhi yebhuloho kuma-turntable e-Fleischmann”.

Intambo ebomvu, empunga nephuzi yentambo yeribhoni enezigxobo ezi-5 kufanele ixhunywe ku-cl.amps “red”, “grey” kanye “yellow” ye-TT-DEC njengoba kukhonjisiwe ngaphakathi komdwebo
I-turntable switch eyenziwa ngesandla, ehlinzekwa kanye ne-turntable ye-Fleischmann, ngeke ixhunywe kulesi simo.

Ukuxhuma i-TT-DEC ku-turntable yase-Märklin 7286:

I-Märklin Turntable 7286 iqukethe ikhebula leribhoni elinezigxobo ezingu-6 kuhlanganisa. ipulaki.

Isikhombisi-ndlela sokuxhuma ipulaki kubha yamaphinikhodi angu-6 we-TT-DEC kufanele siqinisekise ukuthi intambo yeribhoni eyisicaba ibonakala ikude nedekhoda. Intambo akufanele isongwe eduze kwepulaki. Ukuxhumeka ku-turntable kulungile uma intambo eyodwa ensundu yentambo yeribhoni eyisicaba ikhombisa indlela eya ku-11-poles cl.amp ibha.
Iswishi ye-turntable eyenziwa ngesandla, ehlinzekwa kanye ne-turntable ye-Märklin, ngeke ixhunywe kulesi simo.

Ukuze ufake i-decoder ebangeni elikhudlwana ku-turntable ungasebenzisa ikhebuli yethu yokunweba “Kabel s88 0,5m”, “Kabel s88 1m” noma “Kabel s88 2m” enobude obuyimitha elingu-0.5, imitha eyi-1 ngokulandelana imitha eyi-2. . Ukuze ukufakwa okulungile kwesandiso ungalanda i-sample uxhumano 502 kusuka yethu Web-Indawo.

Ukwengeza xhuma ikhebula ledijithali “nsundu” ku-cl elungileamp we-11-poles clamp ibha ephawulwe ngokuthi “brown”. Lokhu ukunikezwa kukaloliwe wesibili wangaphandle we-turntable. Lo mzila wesitimela ungasetshenziswa futhi njengomzila wesitimela ukuze uthole umbiko womsebenzi. Ungathola imininingwane eyengeziwe ngaphakathi kwesigaba “Imibiko Yempendulo”.

Ukuhlela i-TurnTable-Decoder TT-DEC:

Okokuqala sicela uqaphele ukuthi ulandela ngqo ukulandelana kwezinhlelo njengoba kuchazwe ngezansi.

Ukuhlelwa kwekheli eliyisisekelo kanye nefomethi yedatha:

I-TurnTable-Decoder TT-DEC izolawulwa yizisetshenziswa zamakheli (amakheli aphumayo) azosetshenziswa futhi ekushintsheni abantu abaphumayo noma amasignali.
Isakhiwo somyalo we-TT-DEC sihambisana nemiyalo ye-Märklin turntable-decoder 7686. Akunandaba noma ufuna ngempela ukulawula idijithali i-Märklinor turntable ye-Fleischmann.
Inkomba yefomethi yedatha yokulawulwa kwe-TurnTable-Decoder TT-DEC evela esiteshini somyalo (i-Märklin-Motorola noma i-DCC) ayidingeki. Ifomethi yedatha izobonwa ngokuzenzakalelayo ku-TT-DEC phakathi nenqubo yokuhlela elandelayo yekheli eliyisisekelo.
Ngokubhekiselwa ku-Märklin turntable decoder 7686 i-TurnTable-Decoder TTDEC ekwazi ukusebenzisa izingxenye ezimbili zamakheli. Uma usebenzisa isofthiwe ye-PC-model railway yokulawula i-turntable uthola ikakhulukazi ezigabeni ezimbili zamakheli inkomba ethi 14 no-15. Ngalokhu kukhetha kungenzeka ukusebenzisa ama-turntable angu-2 nge-2 TurnTableDecoders TT-DEC esakhiweni sakho.
Isigaba samakheli 14 sihlanganisa amakheli 209 kuze kube ngu-224 futhi isigaba 15 sihlanganisa amakheli 225 kuya ku-240. Kuphela ngokusebenzisa umthamo ogcwele we-turntable enokuxhumana kwamathrekhi angu-48 wonke amakheli angaphakathi kwesigaba samakheli azodingeka.
Uma usebenzisa i-multi protocol command station ekwazi ukuthumela amafomethi edatha amaningana kufanele uqikelele ukuthi wonke amakheli angaphakathi kwesigaba samakheli akhethiwe azoshintshwa afane abe yi-Märklin-Motorola noma i-DCC.
Ithebula elibonisa ukuhambisana phakathi kwesigaba samakheli, ikheli kanye nokusebenza kwe-turntable lingatholakala esahlukweni 4.7. "Ukuhlela- kanye Nokulawula-Ithebula" ngaphakathi kwalo myalelo wokusebenza. Leli thebula likunikeza kanye nolwazi olumayelana nezimpawu (uma kudingekile) isofthiwe yakho yemodeli kaloliwe eyisebenzisela imisebenzi ehlukahlukene ejikajikayo.

Inqubo yokuhlela:

1. Vula isakhiwo sakho sedijithali kanye ne-TurnTable-Decoder TT-DEC. Uma ufuna ukwenza uhlelo lwe-TT-DEC usebenzisa isofthiwe yemodeli kaloliwe wakho kufanele ukhanyise lezo futhi ulungise i-turntable uma kudingekile ekuqaleni ngokuhambisana neziyalezo ezifanele zesofthiwe. Kubalulekile ukuthi isofthiwe yakho yemodeli kaloliwe isekele idekhoda ye-Märklin-turntable 7686 ngoba i-TT-DEC iyahambisana nemiyalo yesikhiphi sekhodi sase-Märklin.
2. Sicela ucindezele kafushane izikhathi ezingu-1 kokhiye u-S1 otholakala ngakwesokudla ngokulandelayo
   kusinki yokushisa ye-TT-DEC. Manje i-LED ephuzi izokhanya.
3. Thumela manje izikhathi ezimbalwa ngomyalo othi >Drehrichtung< (Isikhombisi-ndlela esijikayo) lapho uya ngasohlangothini lwewashi noma uma uphikisana newashi usuka esiteshini sakho somyalo wedijithali noma kusukela kumodeli yakho yesofthiwe kaloliwe ngokuvumelana nethebula lezinhlelo kanye nokulawula (isahluko 4.7.). Uma i-TT-DEC iwubonile umyalo ngemva kokuthumela umyalo izikhathi ezimbalwa lokhu kuzokhonjiswa i-LED ephuzi ecishiwe.
   Le nqubo iqala ukuthi i-TT-DEC izohlelwa kahle ibe yifomethi yedijithali edingekayo (i-Märklin-Motorola noma i-DCC) kanye nebanga lamakheli (14 noma 15).
4. I-TT-DEC izoshiya imodi yokuhlela ngokuzenzakalelayo. Womathathu ama-diode akhipha ukukhanya azokhanya.

Ukulungisa i-turntable bridge-speed kanye ne-cycle-frequency:

Ngenxa yokuthi i-turntable ngayinye iqukethe izici ezihlukene zomshini nezikagesi kuyadingeka ukulungisa ukusebenza okuphephile nokungokoqobo nge-TurnTable-Decoder TT-DEC enama-potentiometer amabili.
Isethingi yefekthri yawo womabili ama-potentiometers isendaweni emaphakathi umcibisholo wesisiphuzo sesethingi ubonisa phezulu (12:00 o`clock). I-potentiometer P1 yemvamisa yomjikelezo (umfanekiso 1) ingalungiswa ukusuka kwesokudla ngemuva kokukhipha ikhava yendlu. I-potentiometer P2 yejubane elijikayo (umfanekiso 2) itholakala ohlangothini olungemuva kwesokunxele eduze kosinki wokushisa.

Ukulungisa:

1. Setha womabili ama-potentiometer abe endaweni emaphakathi ngokusebenzisa isishayeli sesikulufa esincane esifanelekile (12:00 o`clock, ukulungiselelwa kwefekthri) ngoba lesi sikhundla simboza imfuneko yamathebula amaningi aphendukayo.
2. Ukuze uthole ukuphenduka okungu-180 kwebhuloho elijikayo thumela manje umyalo othi > Turn< usuka esiteshini sakho somyalo noma kusukela kumodeli yakho yesofthiwe yesitimela ngokuhambisana netafula lokuhlela nelokulawula (isahluko 4.7).
3. Uxhumo ngalunye lwethrekhi olungase lube khona kufanele luqalise umsindo wokuchofoza futhi ibhuloho lizophenduka ngo-180 degree.
4. Uma ungezwa ngokuchofoza okujwayelekile ekuxhumekeni kwethrekhi ngayinye ibhuloho lizoma kusenesikhathi bese kuthi i-LED ebomvu ikhanyise.
   Bese uvula i-potentiometer P1 “frequency control” endaweni engu-11:00 o`clock bese uthumela umyalo > Turn< futhi. Uma ibhuloho lingeke lijike ngo-180 degree lungisa i-potentiometer "yokulawula imvamisa" endaweni ethi 10:00 o`clock. Ngale ndlela uzothola indawo efanelekile ye-potentiometer "yokulawula imvamisa" ukuze uqinisekise ukuthi ibhuloho lizojika nge-180 degree ngemuva komyalo ngamunye > Turn<.
5. Nge-potentiometer P2 "ijubane lebhuloho elijikayo" kungenzeka ukuthi ushintshe ijubane lokujika lebhuloho. Ukuchofoza kokuxhumeka kwethrekhi ngayinye kuzozwakala. Shintsha isiqondiso sokujika kwebhuloho ngomyalo > Drehrichtung < (isiqondiso sokuguqula) futhi ulungise isivinini sokuphenduka nge-potentiometer P2.
6. Ukulawula: Ngemva kokuqhubeka > vula imiyalo kuzo zombili izinkomba ngesitimela nangaphandle kwesitimela ibhuloho elijikayo kufanele lijike isikhathi ngasinye ngo-180 degree ekuxhumekeni kwethrekhi efanayo. Uma kunesidingo phinda ukulungisa njengoba kuchazwe ngaphansi kuka-1 kuya ku-5 ngesivinini esithe xaxa sokujika. Uma ibhuloho elijikayo liphenduka ngokungalingani ngokuvamile sicela uhlole izakhi ze-turntable yakho.

Izixhumanisi zethrekhi yokuhlela:

Sicela ubekhona:
Ukulungiswa kwesivinini sebhuloho eliguqukayo kanye nefrikhwensi yomjikelezo kufanele kuqedwe ngokuvumelana nesigaba 4.2 ukuze kuqinisekiswe ukuphenduka okuthembekile kwebhuloho elijikayo ngamadigri angu-180 ngomyalo ngamunye othi > Turn< kuzo zombili izikhombisi-ndlela ngaphambi kokuqala ngohlelo lwethrekhi. ukuxhumana.
Ngokwenza izinhlelo zokuxhunywa kwethrekhi kufanele ulungiselele i-TurnTable Decoder TT-DEC yakho ukuze ukwazi ukubona zonke izixhumo zethrekhi ezitholakalayo futhi uvule ibhuloho elijikayo libe ukuxhumana kwethrekhi okudingekayo phakathi nokusebenza. Ngesikhathi senqubo yokuhlela sicela uchaze uxhumo lwethrekhi eyodwa njengengoma 1 njengengoma eyireferensi.

Inqubo yokuhlela:

1. Cindezela ngokushesha inkinobho ethi S1 izikhathi ezi-2. I-LED eluhlaza iyakhanya.
2. Thumela manje umyalo > Okokufaka<. I-LED ebomvu izocishwa maduzane futhi ibhuloho elijikayo liphendukele ethrekhi yokugcina ehleliwe.
3. Vula manje ibhuloho elijikayo elinemiyalo > Isinyathelo< (ngokuhamba kwewashi noma ngokumelene newashi) uye kuthrekhi 1 (ithrekhi eyinkomba).
4. Thumela manje umyalo >Sula< ukuze ugcine ithrekhi yendawo 1 (ithrekhi yereferensi). I-LED ebomvu izocishwa maduzane.
5. Vula ibhuloho elijikajikayo ngomyalo > Isinyathelo< ngokwewashi uye kuxhumo lwethrekhi oludingekayo. Sicela ucabangele ekugcineni kanye nokuxhumana kwengoma eyodwa ephambene.
6. Gcina ukuxhumana kwethrekhi ngomyalo > okokufaka<. I-LED ebomvu izocishwa maduzane.
7. Lungiselela ukuxhumana kwethrekhi okwengeziwe ngendlela efanayo.
8. Uma usuqedile ukuhlelwa kwakho konke ukuxhumana kwethrekhi thumela i-
   umyalo > Qeda<. Ibhuloho elijikayo lizophendukela kuthrekhi 1 (ithrekhi yesithenjwa) futhi imodi yokuhlela izoqedelwa ngokuzenzakalelayo. Uma ibhuloho elijikayo lingeke libuyele kuthrekhi echaziwe yereferensi kufanele uphinde inqubo yokuhlela.

Uhlelo Sample

Ngokwento yokulandelana kwezinhlelo 3 i-turntable ishintshiwe yaba indawo eyireferensi. Ibhuloho lizoba sezingeni elinezindlu ezincane ngakwesokunxele.

Ngomyalo othi >Sula< indawo yethrekhi 1 (ithrekhi yesithenjwa) izogcinwa (into yesi-4 yokulandelana kwezinhlelo).

Ngomyalo > Isinyathelo< ngokwewashi ibhuloho lizophendukela kuxhumo lwethrekhi olutholakalayo olulandelayo. Lokhu kuzoba ukuxhumana kwethrekhi eyodwa (ithrekhi 2). Ngomyalo > Okokufaka< kuzoba ukuxhumana kwethrekhi 2 egcinwe. (into 5 no-6 yokulandelana kwezinhlelo).

Ngomyalo othi >Isinyathelo< ngokwewashi izoqhubekela ekuxhumekeni kwethrekhi 3, 4, 5 kanye no-6. Uxhumo lwethrekhi ngayinye luzogcinwa ngomyalo > Okokufaka<.

Uxhumano lwethrekhi 6 luwukuxhumana kwethrekhi yokugcina okufanele luhlelwe ngoba lokhu ukuxhumana kwethrekhi yokugcina ngaphambi kokuthi ibhuloho lihlale kwelandelayo >Isinyathelo< ngokwewashi futhi kuthrekhi eyireferensi, kodwa ijikiswe ngo-180 degree (indlu encane izoba ngaleso sikhathi. etholakala ngakwesokudla).

Ngakho-ke kuyoba ngaphezu kwalokho umyalo > Ukuphela< odluliselwa ekuxhumekeni kwethrekhi 6. I-turntable izophendukela kuthrekhi 1 (ithrekhi yereferensi) futhi imodi yokuhlela izoshiywa ngokuzenzakalelayo (into yokulandelana kwezinhlelo 8).

Shintsha i-polarity yethrekhi yebhuloho kuma-turntable e-Fleischmann ne-Roco:

Uma i-Fleischmann noma i-Roco turntables 35900 izosetshenziswa esakhiweni sedijithali esinethrekhi engu-2-conductor amathrekhi amane axhumene nawo ebhuloho, axhuma ngogesi ithrekhi yebhuloho nethrekhi, azosuswa.
Okunye kungenzeka yini ukuhlukanisa ujantshi ngamunye nhlangothi zombili ngemuva koxhumano lwethrekhi.
Uma ithrekhi yebhuloho ihlukaniswe ngogesi kusukela ekuxhumekeni kwethrekhi ngokusebenzisa enye yalezi zindlela ezingenhla ukunikezwa okungaguquki nomsindo wedijithali wawo wonke amathrekhi kuya kwi-turntable engenzeka. Ukuhlinzekwa okungapheli kwamathrekhi anamanje wedijithali kunganconywa ngoba ngale ndlela kungenzeka ukuthi uvule noma uvale imisebenzi ethile yendawo ngisho nangaphakathi kweshede lesitimela.
Kodwa uma ibhuloho elijikayo liphenduka ngo-180 degree kuzoba khona isekethe emfushane uma kwenzeka i-polarity yethrekhi yebhuloho ingeke ivumelane ne-polarity yoxhumo lwethrekhi ethintwayo.

I-TurnTable-Decoder TT-DEC iyakwazi ukushintsha i-polarity yesitimela sebhuloho. Ngale njongo kuzoba yi-TurnTable-Decoder ehlanganiswe neyunithi yokushintsha amandla unomphela (DauerStromUmschalter) DSU.
Iyunithi yokushintsha amandla unomphela i-DSU kufanele ixhunywe ne-clamps “G”, “COM” kanye “R” ku-TurnTable-Decoder TT-DEC njengoba kukhonjisiwe ngezansiampuxhumano. Ithrekhi yebhuloho ithola amandla edijithali nge-DSU.

Ekuqaleni kuyadingeka ukuthi uxhume ithrekhi ngocingo eduze kwe-turntable ukuze uqinisekise ukuthi amathrekhi aphambene azoba ne-polarity efanayo. Kuzoba khona umugqa wokuhlukanisa phakathi kwezigaba ezimbili ezihlukene zezintambo. Engxenyeni engezansi yesiyingi (umugqa oqondile) kuzoba ikhebula elinsundu elihlale lixhunywe kujantshi wokuqala libheke izintambo ngendlela yewashi.

Engxenyeni engenhla yesiyingi (umugqa onamachashazi) kuyohlale kukhona intambo yedijithali ebomvu exhunywe kujantshi wokuqala, ibheke izintambo ngendlela yewashi.
Uma ibhuloho elijikajikayo lidlula umugqa wokuhlukanisa phakathi kwezigaba ezimbili zezintambo kuwushintsho lwe-polarity yethrekhi yebhuloho edingekayo ngenxa yokuthi ama-turntable bridge rails athola ukuhlinzekwa kwamanje kwedijithali futhi. Lokhu kungenziwa yi-TurnTable-Decoder TT-DEC ngokusebenzisa iyunithi yokushintsha amandla unomphela i-DSU uma iwazi umugqa wokuhlukanisa.

Ukulandelana kwezinhlelo:

1. Cindezela kafushane izikhathi ezingu-2 inkinobho ethi S1. Manje i-LED eluhlaza izokhanya.
2. Vula ibhuloho elijikajikayo ngomyalo > Isinyathelo< ngokwewashi uye engxenyeni yethrekhi ngomugqa wokuhlukanisa owucabangayo. Ukuma kwebhuloho elijikajikayo eliboniswe esikrinini se-PC noma esibukweni akunandaba inqobo nje uma ukulungiswa kuzokwenziwa ngesofthiwe yemodeli kaloliwe wakho noma ngesiteshi sakho sokuyala esinenkomba ye-turntable.
3. Thumela umyalo >Drehrichtung< (indlela ejikayo) ngokwewashi noma ngokuphambene newashi. Indawo yokushintsha i-polarity izogcinwa futhi imodi yokuhlela izovalwa. Ibhuloho elijikayo lizojika ngokuzenzakalelayo kuxhumo lwethrekhi 1.
4. Ukulawula: Thumela umyalo > Vula<. Uma ibhuloho elijikayo lidlula umugqa wokuhlukanisa i-LED ebomvu izocisha maduzane. Uma isivele iyunithi yokushintsha amandla unomphela (i-DSU) yoshintsho lwe-polarity yethrekhi yebhuloho ifakiwe ku-TT-DEC ukudluliselwa kokudluliselwa kwe-DSU kuzokunikeza ukuchofoza.

Ukuvumelanisa ithrekhi yesithenjwa:

Uma inkomba yesikhundla sebhuloho elijikayo lesoftware kaloliwe oyimodeli noma ekubonisweni kwesiteshi somyalo kungahambisani nendawo yangempela yebhuloho elijikayo kungenzeka ukwenza inqubo yokuvumelanisa.

Inqubo yokuvumelanisa:

1. Cindezela ngokushesha 1 ikhi ethi S1. I-LED ephuzi izokhanya.
2. Vula ibhuloho elijikayo elinemiyalo > Isinyathelo< (ngokuhamba kwewashi noma ngokumelene newashi) uye kuthrekhi 1 (ithrekhi eyinkomba). Ukuma kwe-turntable ekhonjiswe esikrinini se-PC noma esibukweni akunandaba.
3. Thumela umyalo: jikela ngqo kuthrekhi 1. Ibhuloho elijikayo alijiki. Uphawu lwe-turntable esikrinini noma esibukweni lubonisa manje futhi nethrekhi 1. Uma indawo yendlu yokulawula ingalungile sicela uthumele futhi umyalo jika ngokuqondile ukulandelela 1.
4. Thumela manje umyalo > Drehrichtung < (jikisa isiqondiso) ngokwewashi noma ngokumelene newashi. Inqubo yokuvumelanisa manje isiqediwe futhi i-LED ephuzi izocishwa.

Umsebenzi okhethekile: Ukuhlolwa kwe-Turntable / Factory setting:

Ukuhlolwa kwe-Turntable:
Cindezela inkinobho yokuhlela ethi S1 cishe. Imizuzwana engu-4 kuze kucishwe i-LED ebomvu. Ibhuloho lizojika ngo-360 degree ngemva kokukhulula ukhiye futhi lizoma maduzane ekuxhumekeni kwethrekhi ngayinye ehleliwe.

Ukulungiselelwa kwefekthri:
Uma ukhiye wohlelo i-S1 uzocindezelwa amasekhondi angu-2 phakathi nokuvula i-TT-DEC, zonke izinguquko zizosuswa futhi nesilungiselelo sasekuqaleni sizobuyiselwa (ikheli eliyisisekelo 225, ifomethi yedatha ye-DCC, konke ukuxhunywa kwamathrekhi angu-24 ngokulandelana kwawo kuhleliwe. ngokuhambisana nohlobo olulungisiwe lwe-turntable re. Isahluko 48).

Ukuhlela- kanye nethebula lokulawula:

Imibiko yempendulo:

I-Turntable-Decoder TT-DEC iyakwazi ukuthumela ulwazi “indawo okufinyelelwe kuyo” kanye “nethrekhi yebhuloho ethathiwe” kumamojula wempendulo. Leyo mininingwane yempendulo ingasetshenziswa yisiteshi somyalo wedijithali noma isoftware kaloliwe eyimodeli ukuze kuqhutshekwe nokulawula okuzenzakalelayo kokusebenza kwe-turntable.
Ngemuva kokuthi ibhuloho elijikayo lifinyelele endaweni efunwayo i-TurnTable-Decoder TT-DEC idala isignali yempendulo ku-2-poles cl.amp I-KL5 imakwe “ngempendulo” yokuhlolwa kwesoftware kaloliwe oyimodeli.
Ulwazi "ithrekhi yebhuloho elihlalwe" luzotholwa yi-conductor ujantshi emi-3 ngesitimela sokuxhumana (umzila webhuloho elilodwa elihlukanisiwe) kanye nesitimela esinamakhondatha angu-2 ngombiko wokuhlala kwethrekhi ngokusebenzisa isilinganiso samanje.
Ngokubhekiselwa kusistimu ye-turntable efakiwe kanye ne-digital kuzoba namamojula empendulo ahlukene asetshenziselwa ulwazi lwempendulo "indawo efinyelelwe" kanye "nethrekhi yebhuloho ehlalwe".
Izintambo (ezinemibala) samples emakhasini alandelayo kanye nokunye samples ngempendulo yetimu ingatholakala nakuwethu Web-isayithi esigabeni “sample uxhumano” lwe-Turntable-Decoder TT-DEC.

Imibiko yempendulo ne-Märklin Turntable (3-conductor rails):

Isikhundla esifinyelelwe kanye nethrekhi yebhuloho ethathwe ngeMojuli Yempendulo ejwayelekile RM-88-N yebhasi le-s88-Feedback:

Isikhundla esifinyelelwe kanye nethrekhi yebhuloho ebanjwe ne-Optocoupling-Feedback Module RM-88-NO yebhasi le-s88-Feedback:

Imibiko yempendulo ngama-turntable e-Fleischmann kanye ne-Roco turntable 35900 (ama-2-conductor rails):

Isikhundla esifinyelelwe kanye nethrekhi yebhuloho ehlala i-RM-GB-8-N yebhasi le-s88- Impendulo:

Isikhundla esifinyelelwe kanye nesitimela sebhuloho esino-RS-8 sebhasi le-RS-Feedback:

Isikhundla esifinyelelwe kanye nesitimela sebhuloho esino-GBM-8 kanye ne-Roco Feedback Module 10787 yebhasi le-Roco Feedback:

Isikhundla esifinyelelwe kanye nesitimela sebhuloho esino-Uhlenbrock 63 340 we-LocoNet:

Uhlelo lomhlangano:

Kwenziwe eYurophu ngu
I-Littfinski DatenTechnik (LDT)
I-Bühler electronic GmbH
Isiqephu 43
15370 Fredersdorf / Germany
Ucingo: +49 (0) 33439 / 867-0
I-inthanethi: www.ldt-infocenter.com
Kungaphansi kwezinguquko zobuchwepheshe kanye namaphutha. © 12/2021 yi-LDT
I-Märklin ne-Motorola ne-Fleischmann yizimpawu zokuthengisa ezibhalisiwe.

Amadokhumenti / Izinsiza

ldt-infocenter TT-DEC Turn Table Decoder [pdf] Incwadi Yeziqondiso TT-DEC, Turn Table Decoder, Table Decoder, TT-DEC, Decoder

Izithenjwa

• Imaniwali yosebenzisayo